diff mbox series

[v4,7/7] clk/qcom: fix rcg divider value

Message ID 20231107-b4-qcom-clk-v4-7-82bbaf1a796d@linaro.org
State Accepted
Commit d5db46cf93fd19cbbd61ee34a5743c1c7e61f212
Headers show
Series arm: mach-snapdragon: Qualcomm clock driver cleanup | expand

Commit Message

Caleb Connolly Nov. 7, 2023, 12:41 p.m. UTC
The RCG divider field takes a value of (2*h - 1) where h is the divisor.
This allows fractional dividers to be supported by calculating them at
compile time using a macro.

However, the clk_rcg_set_rate_mnd() function was also performing the
calculation. Clean this all up and consistently use the F() macro to
calculate these at compile time and properly support fractional divisors.

Additionally, improve clk_bcr_update() to timeout with a warning rather
than hanging the board, and make the freq_tbl struct and helpers common
so that they can be reused by future platforms.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
---
 drivers/clk/qcom/clock-apq8016.c |  2 +-
 drivers/clk/qcom/clock-apq8096.c |  2 +-
 drivers/clk/qcom/clock-qcom.c    | 64 +++++++++++++++++++++++++++++-----------
 drivers/clk/qcom/clock-qcom.h    | 11 +++++++
 drivers/clk/qcom/clock-qcs404.c  | 16 +++++-----
 drivers/clk/qcom/clock-sdm845.c  | 26 ----------------
 6 files changed, 67 insertions(+), 54 deletions(-)

Comments

Caleb Connolly Nov. 7, 2023, 12:53 p.m. UTC | #1
On 07/11/2023 12:41, Caleb Connolly wrote:
> The RCG divider field takes a value of (2*h - 1) where h is the divisor.
> This allows fractional dividers to be supported by calculating them at
> compile time using a macro.
> 
> However, the clk_rcg_set_rate_mnd() function was also performing the
> calculation. Clean this all up and consistently use the F() macro to
> calculate these at compile time and properly support fractional divisors.
> 
> Additionally, improve clk_bcr_update() to timeout with a warning rather
> than hanging the board, and make the freq_tbl struct and helpers common
> so that they can be reused by future platforms.
> 
> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>

Forgot to pick up Sumit's R-b here.
> ---
>  drivers/clk/qcom/clock-apq8016.c |  2 +-
>  drivers/clk/qcom/clock-apq8096.c |  2 +-
>  drivers/clk/qcom/clock-qcom.c    | 64 +++++++++++++++++++++++++++++-----------
>  drivers/clk/qcom/clock-qcom.h    | 11 +++++++
>  drivers/clk/qcom/clock-qcs404.c  | 16 +++++-----
>  drivers/clk/qcom/clock-sdm845.c  | 26 ----------------
>  6 files changed, 67 insertions(+), 54 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
> index 498e8ef6780d..c0ce570edc79 100644
> --- a/drivers/clk/qcom/clock-apq8016.c
> +++ b/drivers/clk/qcom/clock-apq8016.c
> @@ -78,7 +78,7 @@ static struct vote_clk gcc_blsp1_ahb_clk = {
>  /* SDHCI */
>  static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
>  {
> -	int div = 8; /* 100MHz default */
> +	int div = 15; /* 100MHz default */
>  
>  	if (rate == 200000000)
>  		div = 4;
> diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
> index 367c0f06ae20..cf1a347309a5 100644
> --- a/drivers/clk/qcom/clock-apq8096.c
> +++ b/drivers/clk/qcom/clock-apq8096.c
> @@ -65,7 +65,7 @@ static struct vote_clk gcc_blsp2_ahb_clk = {
>  
>  static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
>  {
> -	int div = 3;
> +	int div = 5;
>  
>  	clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
>  	clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
> diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
> index fc478554f982..7c683e519226 100644
> --- a/drivers/clk/qcom/clock-qcom.c
> +++ b/drivers/clk/qcom/clock-qcom.c
> @@ -19,6 +19,8 @@
>  #include <dm/lists.h>
>  #include <errno.h>
>  #include <asm/io.h>
> +#include <linux/bug.h>
> +#include <linux/delay.h>
>  #include <linux/bitops.h>
>  #include <reset-uclass.h>
>  
> @@ -68,30 +70,42 @@ void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk)
>  /* Update clock command via CMD_RCGR */
>  void clk_bcr_update(phys_addr_t apps_cmd_rcgr)
>  {
> +	u32 count;
>  	setbits_le32(apps_cmd_rcgr, APPS_CMD_RCGR_UPDATE);
>  
>  	/* Wait for frequency to be updated. */
> -	while (readl(apps_cmd_rcgr) & APPS_CMD_RCGR_UPDATE)
> -		;
> +	for (count = 0; count < 50000; count++) {
> +		if (!(readl(apps_cmd_rcgr) & APPS_CMD_RCGR_UPDATE))
> +			break;
> +		udelay(1);
> +	}
> +	WARN(count == 50000, "WARNING: RCG @ %#llx [%#010x] stuck at off\n",
> +	     apps_cmd_rcgr, readl(apps_cmd_rcgr));
>  }
>  
> -#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
> +#define CFG_SRC_DIV_MASK	0b11111
> +#define CFG_SRC_SEL_SHIFT	8
> +#define CFG_SRC_SEL_MASK	(0x7 << CFG_SRC_SEL_SHIFT)
> +#define CFG_MODE_SHIFT		12
> +#define CFG_MODE_MASK		(0x3 << CFG_MODE_SHIFT)
> +#define CFG_MODE_DUAL_EDGE	(0x2 << CFG_MODE_SHIFT)
> +#define CFG_HW_CLK_CTRL_MASK	BIT(20)
>  
> -#define CFG_MASK 0x3FFF
> -
> -#define CFG_DIVIDER_MASK 0x1F
> -
> -/* root set rate for clocks with half integer and MND divider */
> +/*
> + * root set rate for clocks with half integer and MND divider
> + * div should be pre-calculated ((div * 2) - 1)
> + */
>  void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
>  			  int div, int m, int n, int source, u8 mnd_width)
>  {
>  	u32 cfg;
>  	/* M value for MND divider. */
>  	u32 m_val = m;
> +	u32 n_minus_m = n - m;
>  	/* NOT(N-M) value for MND divider. */
> -	u32 n_val = ~((n) - (m)) * !!(n);
> +	u32 n_val = ~n_minus_m * !!(n);
>  	/* NOT 2D value for MND divider. */
> -	u32 d_val = ~(n);
> +	u32 d_val = ~(clamp_t(u32, n, m, n_minus_m));
>  	u32 mask = BIT(mnd_width) - 1;
>  
>  	debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask);
> @@ -103,15 +117,13 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
>  
>  	/* setup src select and divider */
>  	cfg  = readl(base + regs->cfg_rcgr);
> -	cfg &= ~CFG_MASK;
> -	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
> +	cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK);
> +	cfg |= source & CFG_SRC_SEL_MASK; /* Select clock source */
>  
> -	/* Set the divider; HW permits fraction dividers (+0.5), but
> -	   for simplicity, we will support integers only */
>  	if (div)
> -		cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
> +		cfg |= div & CFG_SRC_DIV_MASK;
>  
> -	if (n_val)
> +	if (n && n != m)
>  		cfg |= CFG_MODE_DUAL_EDGE;
>  
>  	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
> @@ -128,7 +140,7 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
>  
>  	/* setup src select and divider */
>  	cfg  = readl(base + regs->cfg_rcgr);
> -	cfg &= ~CFG_MASK;
> +	cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK);
>  	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
>  
>  	/*
> @@ -136,7 +148,7 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
>  	 * for simplicity, we will support integers only
>  	 */
>  	if (div)
> -		cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
> +		cfg |= (2 * div - 1) & CFG_SRC_DIV_MASK;
>  
>  	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
>  
> @@ -144,6 +156,22 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
>  	clk_bcr_update(base + regs->cmd_rcgr);
>  }
>  
> +const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
> +{
> +	if (!f)
> +		return NULL;
> +
> +	if (!f->freq)
> +		return f;
> +
> +	for (; f->freq; f++)
> +		if (rate <= f->freq)
> +			return f;
> +
> +	/* Default to our fastest rate */
> +	return f - 1;
> +}
> +
>  static int msm_clk_probe(struct udevice *dev)
>  {
>  	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(dev);
> diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
> index 24a32cb9666d..01088c19015a 100644
> --- a/drivers/clk/qcom/clock-qcom.h
> +++ b/drivers/clk/qcom/clock-qcom.h
> @@ -32,6 +32,16 @@ struct bcr_regs {
>  	uintptr_t D;
>  };
>  
> +struct freq_tbl {
> +	uint freq;
> +	uint src;
> +	u8 pre_div;
> +	u16 m;
> +	u16 n;
> +};
> +
> +#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
> +
>  struct gate_clk {
>  	uintptr_t reg;
>  	u32 en_val;
> @@ -71,6 +81,7 @@ void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0);
>  void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
>  void clk_enable_cbc(phys_addr_t cbcr);
>  void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk);
> +const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate);
>  void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
>  			  int div, int m, int n, int source, u8 mnd_width);
>  void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
> diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c
> index f234ab5d6541..f5b352803927 100644
> --- a/drivers/clk/qcom/clock-qcs404.c
> +++ b/drivers/clk/qcom/clock-qcs404.c
> @@ -203,7 +203,7 @@ static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate)
>  		break;
>  	case GCC_SDCC1_APPS_CLK:
>  		/* SDCC1: 200MHz */
> -		clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 4, 0, 0,
> +		clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 7, 0, 0,
>  				     CFG_CLK_SRC_GPLL0, 8);
>  		clk_enable_gpll0(priv->base, &gpll0_vote_clk);
>  		clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1));
> @@ -213,16 +213,16 @@ static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate)
>  		break;
>  	case GCC_ETH_RGMII_CLK:
>  		if (rate == 250000000)
> -			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0,
> +			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0,
>  					     CFG_CLK_SRC_GPLL1, 8);
>  		else if (rate == 125000000)
> -			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 4, 0, 0,
> +			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 7, 0, 0,
>  					     CFG_CLK_SRC_GPLL1, 8);
>  		else if (rate == 50000000)
> -			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 10, 0, 0,
> +			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 19, 0, 0,
>  					     CFG_CLK_SRC_GPLL1, 8);
>  		else if (rate == 5000000)
> -			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 1, 50,
> +			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 1, 50,
>  					     CFG_CLK_SRC_GPLL1, 8);
>  		break;
>  	default:
> @@ -239,7 +239,7 @@ static int qcs404_clk_enable(struct clk *clk)
>  	switch (clk->id) {
>  	case GCC_USB30_MASTER_CLK:
>  		clk_enable_cbc(priv->base + USB30_MASTER_CBCR);
> -		clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 4, 0, 0,
> +		clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 7, 0, 0,
>  				     CFG_CLK_SRC_GPLL0, 8);
>  		break;
>  	case GCC_SYS_NOC_USB3_CLK:
> @@ -261,14 +261,14 @@ static int qcs404_clk_enable(struct clk *clk)
>  		/* SPEED_1000: freq -> 250MHz */
>  		clk_enable_cbc(priv->base + ETH_PTP_CBCR);
>  		clk_enable_gpll0(priv->base, &gpll1_vote_clk);
> -		clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 2, 0, 0,
> +		clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 3, 0, 0,
>  				     CFG_CLK_SRC_GPLL1, 8);
>  		break;
>  	case GCC_ETH_RGMII_CLK:
>  		/* SPEED_1000: freq -> 250MHz */
>  		clk_enable_cbc(priv->base + ETH_RGMII_CBCR);
>  		clk_enable_gpll0(priv->base, &gpll1_vote_clk);
> -		clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0,
> +		clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0,
>  				     CFG_CLK_SRC_GPLL1, 8);
>  		break;
>  	case GCC_ETH_SLAVE_AHB_CLK:
> diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
> index 6af1f38302d2..36ffee79d966 100644
> --- a/drivers/clk/qcom/clock-sdm845.c
> +++ b/drivers/clk/qcom/clock-sdm845.c
> @@ -27,16 +27,6 @@
>  #define SE9_UART_APPS_N		0x18154
>  #define SE9_UART_APPS_D		0x18158
>  
> -#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
> -
> -struct freq_tbl {
> -	uint freq;
> -	uint src;
> -	u8 pre_div;
> -	u16 m;
> -	u16 n;
> -};
> -
>  static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
>  	F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625),
>  	F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625),
> @@ -64,22 +54,6 @@ static const struct bcr_regs uart2_regs = {
>  	.D = SE9_UART_APPS_D,
>  };
>  
> -const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
> -{
> -	if (!f)
> -		return NULL;
> -
> -	if (!f->freq)
> -		return f;
> -
> -	for (; f->freq; f++)
> -		if (rate <= f->freq)
> -			return f;
> -
> -	/* Default to our fastest rate */
> -	return f - 1;
> -}
> -
>  static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate)
>  {
>  	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 498e8ef6780d..c0ce570edc79 100644
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -78,7 +78,7 @@  static struct vote_clk gcc_blsp1_ahb_clk = {
 /* SDHCI */
 static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
 {
-	int div = 8; /* 100MHz default */
+	int div = 15; /* 100MHz default */
 
 	if (rate == 200000000)
 		div = 4;
diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
index 367c0f06ae20..cf1a347309a5 100644
--- a/drivers/clk/qcom/clock-apq8096.c
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -65,7 +65,7 @@  static struct vote_clk gcc_blsp2_ahb_clk = {
 
 static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
 {
-	int div = 3;
+	int div = 5;
 
 	clk_enable_cbc(priv->base + SDCC2_AHB_CBCR);
 	clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0,
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index fc478554f982..7c683e519226 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -19,6 +19,8 @@ 
 #include <dm/lists.h>
 #include <errno.h>
 #include <asm/io.h>
+#include <linux/bug.h>
+#include <linux/delay.h>
 #include <linux/bitops.h>
 #include <reset-uclass.h>
 
@@ -68,30 +70,42 @@  void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk)
 /* Update clock command via CMD_RCGR */
 void clk_bcr_update(phys_addr_t apps_cmd_rcgr)
 {
+	u32 count;
 	setbits_le32(apps_cmd_rcgr, APPS_CMD_RCGR_UPDATE);
 
 	/* Wait for frequency to be updated. */
-	while (readl(apps_cmd_rcgr) & APPS_CMD_RCGR_UPDATE)
-		;
+	for (count = 0; count < 50000; count++) {
+		if (!(readl(apps_cmd_rcgr) & APPS_CMD_RCGR_UPDATE))
+			break;
+		udelay(1);
+	}
+	WARN(count == 50000, "WARNING: RCG @ %#llx [%#010x] stuck at off\n",
+	     apps_cmd_rcgr, readl(apps_cmd_rcgr));
 }
 
-#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
+#define CFG_SRC_DIV_MASK	0b11111
+#define CFG_SRC_SEL_SHIFT	8
+#define CFG_SRC_SEL_MASK	(0x7 << CFG_SRC_SEL_SHIFT)
+#define CFG_MODE_SHIFT		12
+#define CFG_MODE_MASK		(0x3 << CFG_MODE_SHIFT)
+#define CFG_MODE_DUAL_EDGE	(0x2 << CFG_MODE_SHIFT)
+#define CFG_HW_CLK_CTRL_MASK	BIT(20)
 
-#define CFG_MASK 0x3FFF
-
-#define CFG_DIVIDER_MASK 0x1F
-
-/* root set rate for clocks with half integer and MND divider */
+/*
+ * root set rate for clocks with half integer and MND divider
+ * div should be pre-calculated ((div * 2) - 1)
+ */
 void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
 			  int div, int m, int n, int source, u8 mnd_width)
 {
 	u32 cfg;
 	/* M value for MND divider. */
 	u32 m_val = m;
+	u32 n_minus_m = n - m;
 	/* NOT(N-M) value for MND divider. */
-	u32 n_val = ~((n) - (m)) * !!(n);
+	u32 n_val = ~n_minus_m * !!(n);
 	/* NOT 2D value for MND divider. */
-	u32 d_val = ~(n);
+	u32 d_val = ~(clamp_t(u32, n, m, n_minus_m));
 	u32 mask = BIT(mnd_width) - 1;
 
 	debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask);
@@ -103,15 +117,13 @@  void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
 
 	/* setup src select and divider */
 	cfg  = readl(base + regs->cfg_rcgr);
-	cfg &= ~CFG_MASK;
-	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
+	cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK);
+	cfg |= source & CFG_SRC_SEL_MASK; /* Select clock source */
 
-	/* Set the divider; HW permits fraction dividers (+0.5), but
-	   for simplicity, we will support integers only */
 	if (div)
-		cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
+		cfg |= div & CFG_SRC_DIV_MASK;
 
-	if (n_val)
+	if (n && n != m)
 		cfg |= CFG_MODE_DUAL_EDGE;
 
 	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
@@ -128,7 +140,7 @@  void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
 
 	/* setup src select and divider */
 	cfg  = readl(base + regs->cfg_rcgr);
-	cfg &= ~CFG_MASK;
+	cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK);
 	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
 
 	/*
@@ -136,7 +148,7 @@  void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
 	 * for simplicity, we will support integers only
 	 */
 	if (div)
-		cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
+		cfg |= (2 * div - 1) & CFG_SRC_DIV_MASK;
 
 	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
 
@@ -144,6 +156,22 @@  void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
 	clk_bcr_update(base + regs->cmd_rcgr);
 }
 
+const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
+{
+	if (!f)
+		return NULL;
+
+	if (!f->freq)
+		return f;
+
+	for (; f->freq; f++)
+		if (rate <= f->freq)
+			return f;
+
+	/* Default to our fastest rate */
+	return f - 1;
+}
+
 static int msm_clk_probe(struct udevice *dev)
 {
 	struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(dev);
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index 24a32cb9666d..01088c19015a 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -32,6 +32,16 @@  struct bcr_regs {
 	uintptr_t D;
 };
 
+struct freq_tbl {
+	uint freq;
+	uint src;
+	u8 pre_div;
+	u16 m;
+	u16 n;
+};
+
+#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
+
 struct gate_clk {
 	uintptr_t reg;
 	u32 en_val;
@@ -71,6 +81,7 @@  void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0);
 void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
 void clk_enable_cbc(phys_addr_t cbcr);
 void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk);
+const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate);
 void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
 			  int div, int m, int n, int source, u8 mnd_width);
 void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c
index f234ab5d6541..f5b352803927 100644
--- a/drivers/clk/qcom/clock-qcs404.c
+++ b/drivers/clk/qcom/clock-qcs404.c
@@ -203,7 +203,7 @@  static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate)
 		break;
 	case GCC_SDCC1_APPS_CLK:
 		/* SDCC1: 200MHz */
-		clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 4, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 7, 0, 0,
 				     CFG_CLK_SRC_GPLL0, 8);
 		clk_enable_gpll0(priv->base, &gpll0_vote_clk);
 		clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1));
@@ -213,16 +213,16 @@  static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate)
 		break;
 	case GCC_ETH_RGMII_CLK:
 		if (rate == 250000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0,
+			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0,
 					     CFG_CLK_SRC_GPLL1, 8);
 		else if (rate == 125000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 4, 0, 0,
+			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 7, 0, 0,
 					     CFG_CLK_SRC_GPLL1, 8);
 		else if (rate == 50000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 10, 0, 0,
+			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 19, 0, 0,
 					     CFG_CLK_SRC_GPLL1, 8);
 		else if (rate == 5000000)
-			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 1, 50,
+			clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 1, 50,
 					     CFG_CLK_SRC_GPLL1, 8);
 		break;
 	default:
@@ -239,7 +239,7 @@  static int qcs404_clk_enable(struct clk *clk)
 	switch (clk->id) {
 	case GCC_USB30_MASTER_CLK:
 		clk_enable_cbc(priv->base + USB30_MASTER_CBCR);
-		clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 4, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 7, 0, 0,
 				     CFG_CLK_SRC_GPLL0, 8);
 		break;
 	case GCC_SYS_NOC_USB3_CLK:
@@ -261,14 +261,14 @@  static int qcs404_clk_enable(struct clk *clk)
 		/* SPEED_1000: freq -> 250MHz */
 		clk_enable_cbc(priv->base + ETH_PTP_CBCR);
 		clk_enable_gpll0(priv->base, &gpll1_vote_clk);
-		clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 2, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 3, 0, 0,
 				     CFG_CLK_SRC_GPLL1, 8);
 		break;
 	case GCC_ETH_RGMII_CLK:
 		/* SPEED_1000: freq -> 250MHz */
 		clk_enable_cbc(priv->base + ETH_RGMII_CBCR);
 		clk_enable_gpll0(priv->base, &gpll1_vote_clk);
-		clk_rcg_set_rate_mnd(priv->base, &emac_regs, 2, 0, 0,
+		clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0,
 				     CFG_CLK_SRC_GPLL1, 8);
 		break;
 	case GCC_ETH_SLAVE_AHB_CLK:
diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
index 6af1f38302d2..36ffee79d966 100644
--- a/drivers/clk/qcom/clock-sdm845.c
+++ b/drivers/clk/qcom/clock-sdm845.c
@@ -27,16 +27,6 @@ 
 #define SE9_UART_APPS_N		0x18154
 #define SE9_UART_APPS_D		0x18158
 
-#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
-
-struct freq_tbl {
-	uint freq;
-	uint src;
-	u8 pre_div;
-	u16 m;
-	u16 n;
-};
-
 static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
 	F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625),
 	F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625),
@@ -64,22 +54,6 @@  static const struct bcr_regs uart2_regs = {
 	.D = SE9_UART_APPS_D,
 };
 
-const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
-{
-	if (!f)
-		return NULL;
-
-	if (!f->freq)
-		return f;
-
-	for (; f->freq; f++)
-		if (rate <= f->freq)
-			return f;
-
-	/* Default to our fastest rate */
-	return f - 1;
-}
-
 static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate)
 {
 	struct msm_clk_priv *priv = dev_get_priv(clk->dev);