diff mbox series

[2/2] watchdog/hpwdt: Remove checks on ilo5

Message ID 20231109024407.120856-3-jerry.hoemann@hpe.com
State New
Headers show
Series watchdog/hpwdt: Cleanup Claiming NMI | expand

Commit Message

Jerry Hoemann Nov. 9, 2023, 2:44 a.m. UTC
This test doesn't really do much.

ProLiant of vintage to have iLO 5, no longer send watchdog NMI as IO CHECK.
They are presented to hpwdt_pretimeout as UNKNOWN which is convered
by the preceding if statement.

Test could have been useful in the ERROR cases to validate FW set nmistat
register correctly but as the default value of "pretimeout" is true, this
test was almost always skipped during platform validation.

Without this if statment, we can remove all references to variable ilo5.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
---
 drivers/watchdog/hpwdt.c | 7 -------
 1 file changed, 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 79ed1626d8ea..138dc8d8ca3d 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -33,7 +33,6 @@ 
 #define DEFAULT_MARGIN			30
 #define PRETIMEOUT_SEC			9
 
-static bool ilo5;
 static unsigned int soft_margin = DEFAULT_MARGIN;	/* in seconds */
 static bool nowayout = WATCHDOG_NOWAYOUT;
 static bool pretimeout = IS_ENABLED(CONFIG_HPWDT_NMI_DECODING);
@@ -181,9 +180,6 @@  static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
 	if (ulReason == NMI_UNKNOWN && !mynmi)
 		return NMI_DONE;
 
-	if (ilo5 && !pretimeout && !mynmi)
-		return NMI_DONE;
-
 	if (kdumptimeout < 0)
 		hpwdt_stop();
 	else if (kdumptimeout == 0)
@@ -363,9 +359,6 @@  static int hpwdt_init_one(struct pci_dev *dev,
 				pretimeout ? "on" : "off");
 	dev_info(&dev->dev, "kdumptimeout: %d.\n", kdumptimeout);
 
-	if (dev->subsystem_vendor == PCI_VENDOR_ID_HP_3PAR)
-		ilo5 = true;
-
 	return 0;
 
 error_wd_register: