| Message ID | 20231120132118.30473-4-brgl@bgdev.pl |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: qcom: add and enable SHM Bridge support | expand |
On 11/20/2023 5:21 AM, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > We need to allocate, map and pass a buffer to the trustzone if we have > more than 4 arguments for a given SCM calls. Let's use the new TrustZone > allocator for that memory and shrink the code in process. > > As this code lives in a different compilation unit than the rest of the > SCM code, we need to provide a helper in the form of > qcom_scm_get_tzmem_pool() that allows the SMC low-level routines to > access the SCM memory pool. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > Reviewed-by: Andrew Halaney <ahalaney@redhat.com> > Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s > --- > drivers/firmware/qcom/qcom_scm-smc.c | 30 ++++++++-------------------- > drivers/firmware/qcom/qcom_scm.c | 5 +++++ > drivers/firmware/qcom/qcom_scm.h | 3 +++ > 3 files changed, 16 insertions(+), 22 deletions(-) > > diff --git a/drivers/firmware/qcom/qcom_scm-smc.c b/drivers/firmware/qcom/qcom_scm-smc.c > index 16cf88acfa8e..dca5f3f1883b 100644 > --- a/drivers/firmware/qcom/qcom_scm-smc.c > +++ b/drivers/firmware/qcom/qcom_scm-smc.c > @@ -2,6 +2,7 @@ > /* Copyright (c) 2015,2019 The Linux Foundation. All rights reserved. > */ > > +#include <linux/cleanup.h> > #include <linux/io.h> > #include <linux/errno.h> > #include <linux/delay.h> > @@ -9,6 +10,7 @@ > #include <linux/slab.h> > #include <linux/types.h> > #include <linux/firmware/qcom/qcom_scm.h> > +#include <linux/firmware/qcom/qcom_tzmem.h> > #include <linux/arm-smccc.h> > #include <linux/dma-mapping.h> > > @@ -150,11 +152,10 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, > enum qcom_scm_convention qcom_convention, > struct qcom_scm_res *res, bool atomic) > { > + struct qcom_tzmem_pool *mempool = qcom_scm_get_tzmem_pool(); > int arglen = desc->arginfo & 0xf; > int i, ret; > - dma_addr_t args_phys = 0; > - void *args_virt = NULL; > - size_t alloc_len; > + void *args_virt __free(qcom_tzmem) = NULL; > gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL; > u32 smccc_call_type = atomic ? ARM_SMCCC_FAST_CALL : ARM_SMCCC_STD_CALL; > u32 qcom_smccc_convention = (qcom_convention == SMC_CONVENTION_ARM_32) ? > @@ -172,9 +173,9 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, > smc.args[i + SCM_SMC_FIRST_REG_IDX] = desc->args[i]; > > if (unlikely(arglen > SCM_SMC_N_REG_ARGS)) { > - alloc_len = SCM_SMC_N_EXT_ARGS * sizeof(u64); > - args_virt = kzalloc(PAGE_ALIGN(alloc_len), flag); > - > + args_virt = qcom_tzmem_alloc(mempool, > + SCM_SMC_N_EXT_ARGS * sizeof(u64), > + flag); I remember seeing page alignment for this memory allocation in downstream code too. I think, after moving to qcom_tzmem_alloc page alignment is not followed. Is this cross checked with firmware requirements? > if (!args_virt) > return -ENOMEM; > > @@ -192,25 +193,10 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, > SCM_SMC_FIRST_EXT_IDX]); > } > > - args_phys = dma_map_single(dev, args_virt, alloc_len, > - DMA_TO_DEVICE); > - > - if (dma_mapping_error(dev, args_phys)) { > - kfree(args_virt); > - return -ENOMEM; > - } > - > - smc.args[SCM_SMC_LAST_REG_IDX] = args_phys; > + smc.args[SCM_SMC_LAST_REG_IDX] = qcom_tzmem_to_phys(args_virt); > } > > - /* ret error check follows after args_virt cleanup*/ > ret = __scm_smc_do(dev, &smc, &smc_res, atomic); > - > - if (args_virt) { > - dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE); > - kfree(args_virt); > - } > - > if (ret) > return ret; > > diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c > index 0d4c028be0c1..71e98b666391 100644 > --- a/drivers/firmware/qcom/qcom_scm.c > +++ b/drivers/firmware/qcom/qcom_scm.c > @@ -201,6 +201,11 @@ static void qcom_scm_bw_disable(void) > enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN; > static DEFINE_SPINLOCK(scm_query_lock); > > +struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void) > +{ > + return __scm->mempool; > +} > + > static enum qcom_scm_convention __get_convention(void) > { > unsigned long flags; > diff --git a/drivers/firmware/qcom/qcom_scm.h b/drivers/firmware/qcom/qcom_scm.h > index 4532907e8489..aa7d06939f8e 100644 > --- a/drivers/firmware/qcom/qcom_scm.h > +++ b/drivers/firmware/qcom/qcom_scm.h > @@ -5,6 +5,7 @@ > #define __QCOM_SCM_INT_H > > struct device; > +struct qcom_tzmem_pool; > > enum qcom_scm_convention { > SMC_CONVENTION_UNKNOWN, > @@ -78,6 +79,8 @@ int scm_legacy_call_atomic(struct device *dev, const struct qcom_scm_desc *desc, > int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc, > struct qcom_scm_res *res); > > +struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void); > + > #define QCOM_SCM_SVC_BOOT 0x01 > #define QCOM_SCM_BOOT_SET_ADDR 0x01 > #define QCOM_SCM_BOOT_TERMINATE_PC 0x02
On Tue, 21 Nov 2023 at 07:38, Prasad Sodagudi <quic_psodagud@quicinc.com> wrote: > > > On 11/20/2023 5:21 AM, Bartosz Golaszewski wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > > > We need to allocate, map and pass a buffer to the trustzone if we have > > more than 4 arguments for a given SCM calls. Let's use the new TrustZone > > allocator for that memory and shrink the code in process. > > > > As this code lives in a different compilation unit than the rest of the > > SCM code, we need to provide a helper in the form of > > qcom_scm_get_tzmem_pool() that allows the SMC low-level routines to > > access the SCM memory pool. > > > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Reviewed-by: Andrew Halaney <ahalaney@redhat.com> > > Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s > > --- > > drivers/firmware/qcom/qcom_scm-smc.c | 30 ++++++++-------------------- > > drivers/firmware/qcom/qcom_scm.c | 5 +++++ > > drivers/firmware/qcom/qcom_scm.h | 3 +++ > > 3 files changed, 16 insertions(+), 22 deletions(-) > > > > diff --git a/drivers/firmware/qcom/qcom_scm-smc.c b/drivers/firmware/qcom/qcom_scm-smc.c > > index 16cf88acfa8e..dca5f3f1883b 100644 > > --- a/drivers/firmware/qcom/qcom_scm-smc.c > > +++ b/drivers/firmware/qcom/qcom_scm-smc.c > > @@ -2,6 +2,7 @@ > > /* Copyright (c) 2015,2019 The Linux Foundation. All rights reserved. > > */ > > > > +#include <linux/cleanup.h> > > #include <linux/io.h> > > #include <linux/errno.h> > > #include <linux/delay.h> > > @@ -9,6 +10,7 @@ > > #include <linux/slab.h> > > #include <linux/types.h> > > #include <linux/firmware/qcom/qcom_scm.h> > > +#include <linux/firmware/qcom/qcom_tzmem.h> > > #include <linux/arm-smccc.h> > > #include <linux/dma-mapping.h> > > > > @@ -150,11 +152,10 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, > > enum qcom_scm_convention qcom_convention, > > struct qcom_scm_res *res, bool atomic) > > { > > + struct qcom_tzmem_pool *mempool = qcom_scm_get_tzmem_pool(); > > int arglen = desc->arginfo & 0xf; > > int i, ret; > > - dma_addr_t args_phys = 0; > > - void *args_virt = NULL; > > - size_t alloc_len; > > + void *args_virt __free(qcom_tzmem) = NULL; > > gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL; > > u32 smccc_call_type = atomic ? ARM_SMCCC_FAST_CALL : ARM_SMCCC_STD_CALL; > > u32 qcom_smccc_convention = (qcom_convention == SMC_CONVENTION_ARM_32) ? > > @@ -172,9 +173,9 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, > > smc.args[i + SCM_SMC_FIRST_REG_IDX] = desc->args[i]; > > > > if (unlikely(arglen > SCM_SMC_N_REG_ARGS)) { > > - alloc_len = SCM_SMC_N_EXT_ARGS * sizeof(u64); > > - args_virt = kzalloc(PAGE_ALIGN(alloc_len), flag); > > - > > + args_virt = qcom_tzmem_alloc(mempool, > > + SCM_SMC_N_EXT_ARGS * sizeof(u64), > > + flag); > > I remember seeing page alignment for this memory allocation in > downstream code too. > > I think, after moving to qcom_tzmem_alloc page alignment is not > followed. Is this cross checked with firmware requirements? > All SCM call requirements are still respected behind the scenes by the allocator. Please see the implementations of qcom_tzmem_pool_new() and qcom_tzmem_alloc(). Bart > > if (!args_virt) > > return -ENOMEM; > > > > @@ -192,25 +193,10 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, > > SCM_SMC_FIRST_EXT_IDX]); > > } > > > > - args_phys = dma_map_single(dev, args_virt, alloc_len, > > - DMA_TO_DEVICE); > > - > > - if (dma_mapping_error(dev, args_phys)) { > > - kfree(args_virt); > > - return -ENOMEM; > > - } > > - > > - smc.args[SCM_SMC_LAST_REG_IDX] = args_phys; > > + smc.args[SCM_SMC_LAST_REG_IDX] = qcom_tzmem_to_phys(args_virt); > > } > > > > - /* ret error check follows after args_virt cleanup*/ > > ret = __scm_smc_do(dev, &smc, &smc_res, atomic); > > - > > - if (args_virt) { > > - dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE); > > - kfree(args_virt); > > - } > > - > > if (ret) > > return ret; > > > > diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c > > index 0d4c028be0c1..71e98b666391 100644 > > --- a/drivers/firmware/qcom/qcom_scm.c > > +++ b/drivers/firmware/qcom/qcom_scm.c > > @@ -201,6 +201,11 @@ static void qcom_scm_bw_disable(void) > > enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN; > > static DEFINE_SPINLOCK(scm_query_lock); > > > > +struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void) > > +{ > > + return __scm->mempool; > > +} > > + > > static enum qcom_scm_convention __get_convention(void) > > { > > unsigned long flags; > > diff --git a/drivers/firmware/qcom/qcom_scm.h b/drivers/firmware/qcom/qcom_scm.h > > index 4532907e8489..aa7d06939f8e 100644 > > --- a/drivers/firmware/qcom/qcom_scm.h > > +++ b/drivers/firmware/qcom/qcom_scm.h > > @@ -5,6 +5,7 @@ > > #define __QCOM_SCM_INT_H > > > > struct device; > > +struct qcom_tzmem_pool; > > > > enum qcom_scm_convention { > > SMC_CONVENTION_UNKNOWN, > > @@ -78,6 +79,8 @@ int scm_legacy_call_atomic(struct device *dev, const struct qcom_scm_desc *desc, > > int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc, > > struct qcom_scm_res *res); > > > > +struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void); > > + > > #define QCOM_SCM_SVC_BOOT 0x01 > > #define QCOM_SCM_BOOT_SET_ADDR 0x01 > > #define QCOM_SCM_BOOT_TERMINATE_PC 0x02
diff --git a/drivers/firmware/qcom/qcom_scm-smc.c b/drivers/firmware/qcom/qcom_scm-smc.c index 16cf88acfa8e..dca5f3f1883b 100644 --- a/drivers/firmware/qcom/qcom_scm-smc.c +++ b/drivers/firmware/qcom/qcom_scm-smc.c @@ -2,6 +2,7 @@ /* Copyright (c) 2015,2019 The Linux Foundation. All rights reserved. */ +#include <linux/cleanup.h> #include <linux/io.h> #include <linux/errno.h> #include <linux/delay.h> @@ -9,6 +10,7 @@ #include <linux/slab.h> #include <linux/types.h> #include <linux/firmware/qcom/qcom_scm.h> +#include <linux/firmware/qcom/qcom_tzmem.h> #include <linux/arm-smccc.h> #include <linux/dma-mapping.h> @@ -150,11 +152,10 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, enum qcom_scm_convention qcom_convention, struct qcom_scm_res *res, bool atomic) { + struct qcom_tzmem_pool *mempool = qcom_scm_get_tzmem_pool(); int arglen = desc->arginfo & 0xf; int i, ret; - dma_addr_t args_phys = 0; - void *args_virt = NULL; - size_t alloc_len; + void *args_virt __free(qcom_tzmem) = NULL; gfp_t flag = atomic ? GFP_ATOMIC : GFP_KERNEL; u32 smccc_call_type = atomic ? ARM_SMCCC_FAST_CALL : ARM_SMCCC_STD_CALL; u32 qcom_smccc_convention = (qcom_convention == SMC_CONVENTION_ARM_32) ? @@ -172,9 +173,9 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, smc.args[i + SCM_SMC_FIRST_REG_IDX] = desc->args[i]; if (unlikely(arglen > SCM_SMC_N_REG_ARGS)) { - alloc_len = SCM_SMC_N_EXT_ARGS * sizeof(u64); - args_virt = kzalloc(PAGE_ALIGN(alloc_len), flag); - + args_virt = qcom_tzmem_alloc(mempool, + SCM_SMC_N_EXT_ARGS * sizeof(u64), + flag); if (!args_virt) return -ENOMEM; @@ -192,25 +193,10 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc, SCM_SMC_FIRST_EXT_IDX]); } - args_phys = dma_map_single(dev, args_virt, alloc_len, - DMA_TO_DEVICE); - - if (dma_mapping_error(dev, args_phys)) { - kfree(args_virt); - return -ENOMEM; - } - - smc.args[SCM_SMC_LAST_REG_IDX] = args_phys; + smc.args[SCM_SMC_LAST_REG_IDX] = qcom_tzmem_to_phys(args_virt); } - /* ret error check follows after args_virt cleanup*/ ret = __scm_smc_do(dev, &smc, &smc_res, atomic); - - if (args_virt) { - dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE); - kfree(args_virt); - } - if (ret) return ret; diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 0d4c028be0c1..71e98b666391 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -201,6 +201,11 @@ static void qcom_scm_bw_disable(void) enum qcom_scm_convention qcom_scm_convention = SMC_CONVENTION_UNKNOWN; static DEFINE_SPINLOCK(scm_query_lock); +struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void) +{ + return __scm->mempool; +} + static enum qcom_scm_convention __get_convention(void) { unsigned long flags; diff --git a/drivers/firmware/qcom/qcom_scm.h b/drivers/firmware/qcom/qcom_scm.h index 4532907e8489..aa7d06939f8e 100644 --- a/drivers/firmware/qcom/qcom_scm.h +++ b/drivers/firmware/qcom/qcom_scm.h @@ -5,6 +5,7 @@ #define __QCOM_SCM_INT_H struct device; +struct qcom_tzmem_pool; enum qcom_scm_convention { SMC_CONVENTION_UNKNOWN, @@ -78,6 +79,8 @@ int scm_legacy_call_atomic(struct device *dev, const struct qcom_scm_desc *desc, int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc, struct qcom_scm_res *res); +struct qcom_tzmem_pool *qcom_scm_get_tzmem_pool(void); + #define QCOM_SCM_SVC_BOOT 0x01 #define QCOM_SCM_BOOT_SET_ADDR 0x01 #define QCOM_SCM_BOOT_TERMINATE_PC 0x02