@@ -87,6 +87,7 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
struct devfreq_cooling_device *dfc = cdev->devdata;
struct devfreq *df = dfc->devfreq;
struct device *dev = df->dev.parent;
+ struct em_perf_state *table;
unsigned long freq;
int perf_idx;
@@ -100,7 +101,10 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
if (dfc->em_pd) {
perf_idx = dfc->max_state - state;
- freq = dfc->em_pd->table[perf_idx].frequency * 1000;
+
+ table = em_get_table(dfc->em_pd);
+ freq = table[perf_idx].frequency * 1000;
+ em_put_table();
} else {
freq = dfc->freq_table[state];
}
@@ -123,14 +127,20 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
*/
static int get_perf_idx(struct em_perf_domain *em_pd, unsigned long freq)
{
- int i;
+ struct em_perf_state *table;
+ int i, idx = -EINVAL;
+ table = em_get_table(em_pd);
for (i = 0; i < em_pd->nr_perf_states; i++) {
- if (em_pd->table[i].frequency == freq)
- return i;
+ if (table[i].frequency != freq)
+ continue;
+
+ idx = i;
+ break;
}
+ em_put_table();
- return -EINVAL;
+ return idx;
}
static unsigned long get_voltage(struct devfreq *df, unsigned long freq)
@@ -181,6 +191,7 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
struct devfreq_cooling_device *dfc = cdev->devdata;
struct devfreq *df = dfc->devfreq;
struct devfreq_dev_status status;
+ struct em_perf_state *table;
unsigned long state;
unsigned long freq;
unsigned long voltage;
@@ -204,7 +215,10 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
state = dfc->capped_state;
/* Convert EM power into milli-Watts first */
- dfc->res_util = dfc->em_pd->table[state].power;
+ table = em_get_table(dfc->em_pd);
+ dfc->res_util = table[state].power;
+ em_put_table();
+
dfc->res_util /= MICROWATT_PER_MILLIWATT;
dfc->res_util *= SCALE_ERROR_MITIGATION;
@@ -225,7 +239,10 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd
_normalize_load(&status);
/* Convert EM power into milli-Watts first */
- *power = dfc->em_pd->table[perf_idx].power;
+ table = em_get_table(dfc->em_pd);
+ *power = table[perf_idx].power;
+ em_put_table();
+
*power /= MICROWATT_PER_MILLIWATT;
/* Scale power for utilization */
*power *= status.busy_time;
@@ -245,13 +262,18 @@ static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev,
unsigned long state, u32 *power)
{
struct devfreq_cooling_device *dfc = cdev->devdata;
+ struct em_perf_state *table;
int perf_idx;
if (state > dfc->max_state)
return -EINVAL;
perf_idx = dfc->max_state - state;
- *power = dfc->em_pd->table[perf_idx].power;
+
+ table = em_get_table(dfc->em_pd);
+ *power = table[perf_idx].power;
+ em_put_table();
+
*power /= MICROWATT_PER_MILLIWATT;
return 0;
@@ -264,6 +286,7 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev,
struct devfreq *df = dfc->devfreq;
struct devfreq_dev_status status;
unsigned long freq, em_power_mw;
+ struct em_perf_state *table;
s32 est_power;
int i;
@@ -288,13 +311,15 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev,
* Find the first cooling state that is within the power
* budget. The EM power table is sorted ascending.
*/
+ table = em_get_table(dfc->em_pd);
for (i = dfc->max_state; i > 0; i--) {
/* Convert EM power to milli-Watts to make safe comparison */
- em_power_mw = dfc->em_pd->table[i].power;
+ em_power_mw = table[i].power;
em_power_mw /= MICROWATT_PER_MILLIWATT;
if (est_power >= em_power_mw)
break;
}
+ em_put_table();
*state = dfc->max_state - i;
dfc->capped_state = *state;
Energy Model framework support modifications at runtime of the power values. Use the new EM table API which is protected with RCU. Align the code so that this RCU read section is short. This change is not expected to alter the general functionality. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> --- drivers/thermal/devfreq_cooling.c | 43 ++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 9 deletions(-)