diff mbox series

[v2,32/35] ALSA: use atomic find_bit() functions where applicable

Message ID 20231203193307.542794-31-yury.norov@gmail.com
State Superseded
Headers show
Series bitops: add atomic find_bit() operations | expand

Commit Message

Yury Norov Dec. 3, 2023, 7:33 p.m. UTC 
ALSA code tests each bit in bitmaps in a for() loop. Switch it to
dedicated atomic find_bit() API.

Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c |  7 +++----
 sound/usb/caiaq/audio.c   | 13 +++++--------
 2 files changed, 8 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 01718b1fc9a7..29254005f394 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -3275,10 +3275,9 @@  static int get_empty_pcm_device(struct hda_bus *bus, unsigned int type)
 
 #ifdef CONFIG_SND_DYNAMIC_MINORS
 	/* non-fixed slots starting from 10 */
-	for (i = 10; i < 32; i++) {
-		if (!test_and_set_bit(i, bus->pcm_dev_bits))
-			return i;
-	}
+	i = find_and_set_next_bit(bus->pcm_dev_bits, 32, 10);
+	if (i < 32)
+		return i;
 #endif
 
 	dev_warn(bus->card->dev, "Too many %s devices\n",
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 4981753652a7..74dfcf32b439 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -610,7 +610,7 @@  static void read_completed(struct urb *urb)
 	struct snd_usb_caiaq_cb_info *info = urb->context;
 	struct snd_usb_caiaqdev *cdev;
 	struct device *dev;
-	struct urb *out = NULL;
+	struct urb *out;
 	int i, frame, len, send_it = 0, outframe = 0;
 	unsigned long flags;
 	size_t offset = 0;
@@ -625,17 +625,14 @@  static void read_completed(struct urb *urb)
 		return;
 
 	/* find an unused output urb that is unused */
-	for (i = 0; i < N_URBS; i++)
-		if (test_and_set_bit(i, &cdev->outurb_active_mask) == 0) {
-			out = cdev->data_urbs_out[i];
-			break;
-		}
-
-	if (!out) {
+	i = find_and_set_bit(&cdev->outurb_active_mask, N_URBS);
+	if (i >= N_URBS) {
 		dev_err(dev, "Unable to find an output urb to use\n");
 		goto requeue;
 	}
 
+	out = cdev->data_urbs_out[i];
+
 	/* read the recently received packet and send back one which has
 	 * the same layout */
 	for (frame = 0; frame < FRAMES_PER_URB; frame++) {