deleted file mode 100644
@@ -1,1458 +0,0 @@
-/** @file
- Provides the basic interfaces to abstract a PCI Host Bridge Resource Allocation
-
-Copyright (c) 2008 - 2013, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are
-licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "PciHostBridge.h"
-
-//
-// Hard code: Root Bridge Number within the host bridge
-// Root Bridge's attribute
-// Root Bridge's device path
-// Root Bridge's resource aperture
-//
-UINTN RootBridgeNumber[1] = { 1 };
-
-UINT64 RootBridgeAttribute[1][1] = { { EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM } };
-
-EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath[1][1] = {
- {
- {
- {
- {
- ACPI_DEVICE_PATH,
- ACPI_DP,
- {
- (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)),
- (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8)
- }
- },
- EISA_PNP_ID(0x0A03),
- 0
- },
-
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- END_DEVICE_PATH_LENGTH,
- 0
- }
- }
- }
- }
-};
-
-STATIC PCI_ROOT_BRIDGE_RESOURCE_APERTURE mResAperture[1][1];
-
-EFI_HANDLE mDriverImageHandle;
-
-PCI_HOST_BRIDGE_INSTANCE mPciHostBridgeInstanceTemplate = {
- PCI_HOST_BRIDGE_SIGNATURE, // Signature
- NULL, // HostBridgeHandle
- 0, // RootBridgeNumber
- {NULL, NULL}, // Head
- FALSE, // ResourceSubiteed
- TRUE, // CanRestarted
- {
- NotifyPhase,
- GetNextRootBridge,
- GetAttributes,
- StartBusEnumeration,
- SetBusNumbers,
- SubmitResources,
- GetProposedResources,
- PreprocessController
- }
-};
-
-//
-// Implementation
-//
-
-//
-// We expect the "ranges" property of "pci-host-ecam-generic" to consist of
-// records like this.
-//
-#pragma pack (1)
-typedef struct {
- UINT32 Type;
- UINT64 ChildBase;
- UINT64 CpuBase;
- UINT64 Size;
-} DTB_PCI_HOST_RANGE_RECORD;
-#pragma pack ()
-
-#define DTB_PCI_HOST_RANGE_RELOCATABLE BIT31
-#define DTB_PCI_HOST_RANGE_PREFETCHABLE BIT30
-#define DTB_PCI_HOST_RANGE_ALIASED BIT29
-#define DTB_PCI_HOST_RANGE_MMIO32 BIT25
-#define DTB_PCI_HOST_RANGE_MMIO64 (BIT25 | BIT24)
-#define DTB_PCI_HOST_RANGE_IO BIT24
-#define DTB_PCI_HOST_RANGE_TYPEMASK (BIT31 | BIT30 | BIT29 | BIT25 | BIT24)
-
-STATIC
-EFI_STATUS
-ProcessPciHost (
- OUT UINT64 *IoBase,
- OUT UINT64 *IoSize,
- OUT UINT64 *IoTranslation,
- OUT UINT64 *MmioBase,
- OUT UINT64 *MmioSize,
- OUT UINT64 *MmioTranslation,
- OUT UINT32 *BusMin,
- OUT UINT32 *BusMax
- )
-{
- FDT_CLIENT_PROTOCOL *FdtClient;
- INT32 Node;
- UINT64 ConfigBase, ConfigSize;
- CONST VOID *Prop;
- UINT32 Len;
- UINT32 RecordIdx;
- EFI_STATUS Status;
-
- //
- // The following output arguments are initialized only in
- // order to suppress '-Werror=maybe-uninitialized' warnings
- // *incorrectly* emitted by some gcc versions.
- //
- *IoBase = 0;
- *IoTranslation = 0;
- *MmioBase = 0;
- *MmioTranslation = 0;
- *BusMin = 0;
- *BusMax = 0;
-
- //
- // *IoSize and *MmioSize are initialized to zero because the logic below
- // requires it. However, since they are also affected by the issue reported
- // above, they are initialized early.
- //
- *IoSize = 0;
- *MmioSize = 0;
-
- Status = gBS->LocateProtocol (&gFdtClientProtocolGuid, NULL,
- (VOID **)&FdtClient);
- ASSERT_EFI_ERROR (Status);
-
- Status = FdtClient->FindCompatibleNode (FdtClient, "pci-host-ecam-generic",
- &Node);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_INFO,
- "%a: No 'pci-host-ecam-generic' compatible DT node found\n",
- __FUNCTION__));
- return EFI_NOT_FOUND;
- }
-
- DEBUG_CODE (
- INT32 Tmp;
-
- //
- // A DT can legally describe multiple PCI host bridges, but we are not
- // equipped to deal with that. So assert that there is only one.
- //
- Status = FdtClient->FindNextCompatibleNode (FdtClient,
- "pci-host-ecam-generic", Node, &Tmp);
- ASSERT (Status == EFI_NOT_FOUND);
- );
-
- Status = FdtClient->GetNodeProperty (FdtClient, Node, "reg", &Prop, &Len);
- if (EFI_ERROR (Status) || Len != 2 * sizeof (UINT64)) {
- DEBUG ((EFI_D_ERROR, "%a: 'reg' property not found or invalid\n",
- __FUNCTION__));
- return EFI_PROTOCOL_ERROR;
- }
-
- //
- // Fetch the ECAM window.
- //
- ConfigBase = SwapBytes64 (((CONST UINT64 *)Prop)[0]);
- ConfigSize = SwapBytes64 (((CONST UINT64 *)Prop)[1]);
-
- //
- // Fetch the bus range (note: inclusive).
- //
- Status = FdtClient->GetNodeProperty (FdtClient, Node, "bus-range", &Prop,
- &Len);
- if (EFI_ERROR (Status) || Len != 2 * sizeof (UINT32)) {
- DEBUG ((EFI_D_ERROR, "%a: 'bus-range' not found or invalid\n",
- __FUNCTION__));
- return EFI_PROTOCOL_ERROR;
- }
- *BusMin = SwapBytes32 (((CONST UINT32 *)Prop)[0]);
- *BusMax = SwapBytes32 (((CONST UINT32 *)Prop)[1]);
-
- //
- // Sanity check: the config space must accommodate all 4K register bytes of
- // all 8 functions of all 32 devices of all buses.
- //
- if (*BusMax < *BusMin || *BusMax - *BusMin == MAX_UINT32 ||
- DivU64x32 (ConfigSize, SIZE_4KB * 8 * 32) < *BusMax - *BusMin + 1) {
- DEBUG ((EFI_D_ERROR, "%a: invalid 'bus-range' and/or 'reg'\n",
- __FUNCTION__));
- return EFI_PROTOCOL_ERROR;
- }
-
- //
- // Iterate over "ranges".
- //
- Status = FdtClient->GetNodeProperty (FdtClient, Node, "ranges", &Prop, &Len);
- if (EFI_ERROR (Status) || Len == 0 ||
- Len % sizeof (DTB_PCI_HOST_RANGE_RECORD) != 0) {
- DEBUG ((EFI_D_ERROR, "%a: 'ranges' not found or invalid\n", __FUNCTION__));
- return EFI_PROTOCOL_ERROR;
- }
-
- for (RecordIdx = 0; RecordIdx < Len / sizeof (DTB_PCI_HOST_RANGE_RECORD);
- ++RecordIdx) {
- CONST DTB_PCI_HOST_RANGE_RECORD *Record;
-
- Record = (CONST DTB_PCI_HOST_RANGE_RECORD *)Prop + RecordIdx;
- switch (SwapBytes32 (Record->Type) & DTB_PCI_HOST_RANGE_TYPEMASK) {
- case DTB_PCI_HOST_RANGE_IO:
- *IoBase = SwapBytes64 (Record->ChildBase);
- *IoSize = SwapBytes64 (Record->Size);
- *IoTranslation = SwapBytes64 (Record->CpuBase) - *IoBase;
- break;
-
- case DTB_PCI_HOST_RANGE_MMIO32:
- *MmioBase = SwapBytes64 (Record->ChildBase);
- *MmioSize = SwapBytes64 (Record->Size);
- *MmioTranslation = SwapBytes64 (Record->CpuBase) - *MmioBase;
-
- if (*MmioBase > MAX_UINT32 || *MmioSize > MAX_UINT32 ||
- *MmioBase + *MmioSize > SIZE_4GB) {
- DEBUG ((EFI_D_ERROR, "%a: MMIO32 space invalid\n", __FUNCTION__));
- return EFI_PROTOCOL_ERROR;
- }
-
- if (*MmioTranslation != 0) {
- DEBUG ((EFI_D_ERROR, "%a: unsupported nonzero MMIO32 translation "
- "0x%Lx\n", __FUNCTION__, *MmioTranslation));
- return EFI_UNSUPPORTED;
- }
-
- break;
- }
- }
- if (*IoSize == 0 || *MmioSize == 0) {
- DEBUG ((EFI_D_ERROR, "%a: %a space empty\n", __FUNCTION__,
- (*IoSize == 0) ? "IO" : "MMIO32"));
- return EFI_PROTOCOL_ERROR;
- }
-
- //
- // The dynamic PCD PcdPciExpressBaseAddress should have already been set,
- // and should match the value we found in the DT node.
- //
- ASSERT (PcdGet64 (PcdPciExpressBaseAddress) == ConfigBase);
-
- DEBUG ((EFI_D_INFO, "%a: Config[0x%Lx+0x%Lx) Bus[0x%x..0x%x] "
- "Io[0x%Lx+0x%Lx)@0x%Lx Mem[0x%Lx+0x%Lx)@0x%Lx\n", __FUNCTION__, ConfigBase,
- ConfigSize, *BusMin, *BusMax, *IoBase, *IoSize, *IoTranslation, *MmioBase,
- *MmioSize, *MmioTranslation));
- return EFI_SUCCESS;
-}
-
-
-/**
- Entry point of this driver
-
- @param ImageHandle Handle of driver image
- @param SystemTable Point to EFI_SYSTEM_TABLE
-
- @retval EFI_ABORTED PCI host bridge not present
- @retval EFI_OUT_OF_RESOURCES Can not allocate memory resource
- @retval EFI_DEVICE_ERROR Can not install the protocol instance
- @retval EFI_SUCCESS Success to initialize the Pci host bridge.
-**/
-EFI_STATUS
-EFIAPI
-InitializePciHostBridge (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- UINT64 MmioAttributes;
- EFI_STATUS Status;
- UINTN Loop1;
- UINTN Loop2;
- PCI_HOST_BRIDGE_INSTANCE *HostBridge;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- UINT64 IoBase, IoSize, IoTranslation;
- UINT64 MmioBase, MmioSize, MmioTranslation;
- UINT32 BusMin, BusMax;
-
- if (PcdGet64 (PcdPciExpressBaseAddress) == 0) {
- DEBUG ((EFI_D_INFO, "%a: PCI host bridge not present\n", __FUNCTION__));
- return EFI_ABORTED;
- }
-
- Status = ProcessPciHost (&IoBase, &IoSize, &IoTranslation, &MmioBase,
- &MmioSize, &MmioTranslation, &BusMin, &BusMax);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- mDriverImageHandle = ImageHandle;
-
- mResAperture[0][0].BusBase = BusMin;
- mResAperture[0][0].BusLimit = BusMax;
-
- mResAperture[0][0].MemBase = MmioBase;
- mResAperture[0][0].MemLimit = MmioBase + MmioSize - 1;
-
- mResAperture[0][0].IoBase = IoBase;
- mResAperture[0][0].IoLimit = IoBase + IoSize - 1;
- mResAperture[0][0].IoTranslation = IoTranslation;
-
- //
- // Add IO and MMIO memory space, so that resources can be allocated in the
- // EfiPciHostBridgeAllocateResources phase.
- //
- Status = gDS->AddIoSpace (
- EfiGcdIoTypeIo,
- IoBase,
- IoSize
- );
- ASSERT_EFI_ERROR (Status);
-
- MmioAttributes = EFI_MEMORY_UC;
-
- Status = gDS->AddMemorySpace (
- EfiGcdMemoryTypeMemoryMappedIo,
- MmioBase,
- MmioSize,
- MmioAttributes
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "%a: AddMemorySpace: %r\n", __FUNCTION__, Status));
- return Status;
- }
-
- Status = gDS->SetMemorySpaceAttributes (
- MmioBase,
- MmioSize,
- MmioAttributes
- );
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "%a: SetMemorySpaceAttributes: %r\n", __FUNCTION__,
- Status));
- return Status;
- }
-
- //
- // Create Host Bridge Device Handle
- //
- for (Loop1 = 0; Loop1 < HOST_BRIDGE_NUMBER; Loop1++) {
- HostBridge = AllocateCopyPool (sizeof(PCI_HOST_BRIDGE_INSTANCE), &mPciHostBridgeInstanceTemplate);
- if (HostBridge == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- HostBridge->RootBridgeNumber = RootBridgeNumber[Loop1];
- InitializeListHead (&HostBridge->Head);
-
- Status = gBS->InstallMultipleProtocolInterfaces (
- &HostBridge->HostBridgeHandle,
- &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool (HostBridge);
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Create Root Bridge Device Handle in this Host Bridge
- //
-
- for (Loop2 = 0; Loop2 < HostBridge->RootBridgeNumber; Loop2++) {
- PrivateData = AllocateZeroPool (sizeof(PCI_ROOT_BRIDGE_INSTANCE));
- if (PrivateData == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- PrivateData->Signature = PCI_ROOT_BRIDGE_SIGNATURE;
- PrivateData->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath[Loop1][Loop2];
-
- RootBridgeConstructor (
- &PrivateData->Io,
- HostBridge->HostBridgeHandle,
- RootBridgeAttribute[Loop1][Loop2],
- &mResAperture[Loop1][Loop2]
- );
-
- Status = gBS->InstallMultipleProtocolInterfaces(
- &PrivateData->Handle,
- &gEfiDevicePathProtocolGuid, PrivateData->DevicePath,
- &gEfiPciRootBridgeIoProtocolGuid, &PrivateData->Io,
- NULL
- );
- if (EFI_ERROR (Status)) {
- FreePool(PrivateData);
- return EFI_DEVICE_ERROR;
- }
-
- InsertTailList (&HostBridge->Head, &PrivateData->Link);
- }
- }
-
- return EFI_SUCCESS;
-}
-
-
-/**
- These are the notifications from the PCI bus driver that it is about to enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data
- structures. The PCI enumerator should issue this notification
- before starting a fresh enumeration process. Enumeration cannot
- be restarted after sending any other notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is
- required here. This notification can be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No
- specific action is required here. This notification can be used to
- perform any chipset-specific programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is about to begin. No specific
- action is required here. This notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI
- root bridges. These resource settings are returned on the next call to
- GetProposedResources(). Before calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible
- for gathering I/O and memory requests for
- all the PCI root bridges and submitting these requests using
- SubmitResources(). This function pads the resource amount
- to suit the root bridge hardware, takes care of dependencies between
- the PCI root bridges, and calls the Global Coherency Domain (GCD)
- with the allocation request. In the case of padding, the allocated range
- could be bigger than what was requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated
- resources (proposed resources) for all the PCI root bridges. After the
- hardware is programmed, reassigning resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI
- root bridges and resets the I/O and memory apertures to their initial
- state. The bus settings are not affected. If the request to allocate
- resources fails, the PCI enumerator can use this notification to
- deallocate previous resources, adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is
- required here. This notification can be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error
- is valid for a Phase of EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any errors.
-
-**/
-EFI_STATUS
-EFIAPI
-NotifyPhase(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
- )
-{
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- PCI_RESOURCE_TYPE Index;
- LIST_ENTRY *List;
- EFI_PHYSICAL_ADDRESS BaseAddress;
- UINT64 AddrLen;
- UINTN BitsOfAlignment;
- EFI_STATUS Status;
- EFI_STATUS ReturnStatus;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
-
- switch (Phase) {
-
- case EfiPciHostBridgeBeginEnumeration:
- if (HostBridgeInstance->CanRestarted) {
- //
- // Reset the Each Root Bridge
- //
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- for (Index = TypeIo; Index < TypeMax; Index++) {
- RootBridgeInstance->ResAllocNode[Index].Type = Index;
- RootBridgeInstance->ResAllocNode[Index].Base = 0;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
- }
-
- List = List->ForwardLink;
- }
-
- HostBridgeInstance->ResourceSubmited = FALSE;
- HostBridgeInstance->CanRestarted = TRUE;
- } else {
- //
- // Can not restart
- //
- return EFI_NOT_READY;
- }
- break;
-
- case EfiPciHostBridgeEndEnumeration:
- break;
-
- case EfiPciHostBridgeBeginBusAllocation:
- //
- // No specific action is required here, can perform any chipset specific programing
- //
- HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- case EfiPciHostBridgeEndBusAllocation:
- //
- // No specific action is required here, can perform any chipset specific programing
- //
- //HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- case EfiPciHostBridgeBeginResourceAllocation:
- //
- // No specific action is required here, can perform any chipset specific programing
- //
- //HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- case EfiPciHostBridgeAllocateResources:
- ReturnStatus = EFI_SUCCESS;
- if (HostBridgeInstance->ResourceSubmited) {
- //
- // Take care of the resource dependencies between the root bridges
- //
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- for (Index = TypeIo; Index < TypeBus; Index++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
-
- AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
-
- //
- // Get the number of '1' in Alignment.
- //
- BitsOfAlignment = (UINTN) (HighBitSet64 (RootBridgeInstance->ResAllocNode[Index].Alignment) + 1);
-
- switch (Index) {
-
- case TypeIo:
- //
- // It is impossible for this chipset to align 0xFFFF for IO16
- // So clear it
- //
- if (BitsOfAlignment >= 16) {
- BitsOfAlignment = 0;
- }
-
- BaseAddress = mResAperture[0][0].IoLimit;
- Status = gDS->AllocateIoSpace (
- EfiGcdAllocateMaxAddressSearchTopDown,
- EfiGcdIoTypeIo,
- BitsOfAlignment,
- AddrLen,
- &BaseAddress,
- mDriverImageHandle,
- NULL
- );
-
- if (!EFI_ERROR (Status)) {
- RootBridgeInstance->ResAllocNode[Index].Base = (UINTN)BaseAddress;
- RootBridgeInstance->ResAllocNode[Index].Status = ResAllocated;
- } else {
- ReturnStatus = Status;
- if (Status != EFI_OUT_OF_RESOURCES) {
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- }
- }
-
- break;
-
-
- case TypeMem32:
- //
- // It is impossible for this chipset to align 0xFFFFFFFF for Mem32
- // So clear it
- //
-
- if (BitsOfAlignment >= 32) {
- BitsOfAlignment = 0;
- }
-
- BaseAddress = mResAperture[0][0].MemLimit;
- Status = gDS->AllocateMemorySpace (
- EfiGcdAllocateMaxAddressSearchTopDown,
- EfiGcdMemoryTypeMemoryMappedIo,
- BitsOfAlignment,
- AddrLen,
- &BaseAddress,
- mDriverImageHandle,
- NULL
- );
-
- if (!EFI_ERROR (Status)) {
- // We were able to allocate the PCI memory
- RootBridgeInstance->ResAllocNode[Index].Base = (UINTN)BaseAddress;
- RootBridgeInstance->ResAllocNode[Index].Status = ResAllocated;
-
- } else {
- // Not able to allocate enough PCI memory
- ReturnStatus = Status;
-
- if (Status != EFI_OUT_OF_RESOURCES) {
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- }
- ASSERT (FALSE);
- }
- break;
-
- case TypePMem32:
- case TypeMem64:
- case TypePMem64:
- ReturnStatus = EFI_ABORTED;
- break;
- default:
- ASSERT (FALSE);
- break;
- }; //end switch
- }
- }
-
- List = List->ForwardLink;
- }
-
- return ReturnStatus;
- } else {
- return EFI_NOT_READY;
- }
-
- case EfiPciHostBridgeSetResources:
- break;
-
- case EfiPciHostBridgeFreeResources:
- ReturnStatus = EFI_SUCCESS;
- List = HostBridgeInstance->Head.ForwardLink;
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- for (Index = TypeIo; Index < TypeBus; Index++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status == ResAllocated) {
- AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- BaseAddress = RootBridgeInstance->ResAllocNode[Index].Base;
- switch (Index) {
-
- case TypeIo:
- Status = gDS->FreeIoSpace (BaseAddress, AddrLen);
- if (EFI_ERROR (Status)) {
- ReturnStatus = Status;
- }
- break;
-
- case TypeMem32:
- Status = gDS->FreeMemorySpace (BaseAddress, AddrLen);
- if (EFI_ERROR (Status)) {
- ReturnStatus = Status;
- }
- break;
-
- case TypePMem32:
- break;
-
- case TypeMem64:
- break;
-
- case TypePMem64:
- break;
-
- default:
- ASSERT (FALSE);
- break;
-
- }; //end switch
- RootBridgeInstance->ResAllocNode[Index].Type = Index;
- RootBridgeInstance->ResAllocNode[Index].Base = 0;
- RootBridgeInstance->ResAllocNode[Index].Length = 0;
- RootBridgeInstance->ResAllocNode[Index].Status = ResNone;
- }
- }
-
- List = List->ForwardLink;
- }
-
- HostBridgeInstance->ResourceSubmited = FALSE;
- HostBridgeInstance->CanRestarted = TRUE;
- return ReturnStatus;
-
- case EfiPciHostBridgeEndResourceAllocation:
- HostBridgeInstance->CanRestarted = FALSE;
- break;
-
- default:
- return EFI_INVALID_PARAMETER;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Return the device handle of the next PCI root bridge that is associated with this Host Bridge.
-
- This function is called multiple times to retrieve the device handles of all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous call is passed into the
- interface, and on output the interface returns the device handle of the next PCI root bridge. The
- caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report, the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
- returned on a previous call to GetNextRootBridge().
-**/
-EFI_STATUS
-EFIAPI
-GetNextRootBridge(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN OUT EFI_HANDLE *RootBridgeHandle
- )
-{
- BOOLEAN NoRootBridge;
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
-
- NoRootBridge = TRUE;
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
-
- while (List != &HostBridgeInstance->Head) {
- NoRootBridge = FALSE;
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (*RootBridgeHandle == NULL) {
- //
- // Return the first Root Bridge Handle of the Host Bridge
- //
- *RootBridgeHandle = RootBridgeInstance->Handle;
- return EFI_SUCCESS;
- } else {
- if (*RootBridgeHandle == RootBridgeInstance->Handle) {
- //
- // Get next if have
- //
- List = List->ForwardLink;
- if (List!=&HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- *RootBridgeHandle = RootBridgeInstance->Handle;
- return EFI_SUCCESS;
- } else {
- return EFI_NOT_FOUND;
- }
- }
- }
-
- List = List->ForwardLink;
- } //end while
-
- if (NoRootBridge) {
- return EFI_NOT_FOUND;
- } else {
- return EFI_INVALID_PARAMETER;
- }
-}
-
-/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from the decode-related
- attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device
- handles of all the root bridges that are associated with this host bridge must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do not change during or
- after the enumeration process. The hardware may provide mechanisms to change the attributes on
- the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------ ----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate
- windows for nonprefetchable and prefetchable memory. A PCI bus
- driver needs to include requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory
- windows. If this bit is not set, the PCI bus driver needs to include
- requests for a 64-bit memory address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type
- EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-GetAttributes(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT UINT64 *Attributes
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
-
- if (Attributes == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- *Attributes = RootBridgeInstance->RootBridgeAttrib;
- return EFI_SUCCESS;
- }
- List = List->ForwardLink;
- }
-
- //
- // RootBridgeHandle is not an EFI_HANDLE
- // that was returned on a previous call to GetNextRootBridge()
- //
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Sets up the specified PCI root bridge for the bus enumeration process.
-
- This member function sets up the root bridge for bus enumeration and returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
-
-**/
-EFI_STATUS
-EFIAPI
-StartBusEnumeration(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- VOID *Buffer;
- UINT8 *Temp;
- UINT64 BusStart;
- UINT64 BusEnd;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- //
- // Set up the Root Bridge for Bus Enumeration
- //
- BusStart = RootBridgeInstance->BusBase;
- BusEnd = RootBridgeInstance->BusLimit;
- //
- // Program the Hardware(if needed) if error return EFI_DEVICE_ERROR
- //
-
- Buffer = AllocatePool (sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR));
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Temp = (UINT8 *)Buffer;
-
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Desc = 0x8A;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Len = 0x2B;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->ResType = 2;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->GenFlag = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->SpecificFlag = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrSpaceGranularity = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMin = BusStart;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMax = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrTranslationOffset = 0;
- ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrLen = BusEnd - BusStart + 1;
-
- Temp = Temp + sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
-
- *Configuration = Buffer;
- return EFI_SUCCESS;
- }
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI bus range.
-
- This member function programs the specified PCI root bridge to decode the bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetBusNumbers(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINT8 *Ptr;
- UINTN BusStart;
- UINTN BusEnd;
- UINTN BusLen;
-
- if (Configuration == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- Ptr = Configuration;
-
- //
- // Check the Configuration is valid
- //
- if(*Ptr != ACPI_ADDRESS_SPACE_DESCRIPTOR) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->ResType != 2) {
- return EFI_INVALID_PARAMETER;
- }
-
- Ptr += sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- if (*Ptr != ACPI_END_TAG_DESCRIPTOR) {
- return EFI_INVALID_PARAMETER;
- }
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- Ptr = Configuration;
-
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- BusStart = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrRangeMin;
- BusLen = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrLen;
- BusEnd = BusStart + BusLen - 1;
-
- if (BusStart > BusEnd) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((BusStart < RootBridgeInstance->BusBase) || (BusEnd > RootBridgeInstance->BusLimit)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Update the Bus Range
- //
- RootBridgeInstance->ResAllocNode[TypeBus].Base = BusStart;
- RootBridgeInstance->ResAllocNode[TypeBus].Length = BusLen;
- RootBridgeInstance->ResAllocNode[TypeBus].Status = ResAllocated;
-
- //
- // Program the Root Bridge Hardware
- //
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-
-/**
- Submits the I/O and memory resource requirements for the specified PCI root bridge.
-
- This function is used to submit all the I/O and memory resources that are required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are
- not supported by this PCI root bridge. This error will happen if the caller
- did not combine resources according to Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-SubmitResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINT8 *Temp;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
- UINT64 AddrLen;
- UINT64 Alignment;
-
- //
- // Check the input parameter: Configuration
- //
- if (Configuration == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- Temp = (UINT8 *)Configuration;
- while ( *Temp == 0x8A) {
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ;
- }
- if (*Temp != 0x79) {
- return EFI_INVALID_PARAMETER;
- }
-
- Temp = (UINT8 *)Configuration;
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- for (;
- *Temp == 0x8A;
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR)
- ) {
- Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
-
- //
- // Check Address Length
- //
- if (Ptr->AddrLen == 0) {
- HostBridgeInstance->ResourceSubmited = TRUE;
- continue;
- }
- if (Ptr->AddrLen > 0xffffffff) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check address range alignment
- //
- if (Ptr->AddrRangeMax >= 0xffffffff || Ptr->AddrRangeMax != (GetPowerOfTwo64 (Ptr->AddrRangeMax + 1) - 1)) {
- return EFI_INVALID_PARAMETER;
- }
-
- switch (Ptr->ResType) {
-
- case 0:
-
- //
- // Check invalid Address Sapce Granularity
- //
- if (Ptr->AddrSpaceGranularity != 32) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // check the memory resource request is supported by PCI root bridge
- //
- if (RootBridgeInstance->RootBridgeAttrib == EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM &&
- Ptr->SpecificFlag == 0x06) {
- return EFI_INVALID_PARAMETER;
- }
-
- AddrLen = Ptr->AddrLen;
- Alignment = Ptr->AddrRangeMax;
- if (Ptr->AddrSpaceGranularity == 32) {
- if (Ptr->SpecificFlag == 0x06) {
- //
- // Apply from GCD
- //
- RootBridgeInstance->ResAllocNode[TypePMem32].Status = ResSubmitted;
- } else {
- RootBridgeInstance->ResAllocNode[TypeMem32].Length = AddrLen;
- RootBridgeInstance->ResAllocNode[TypeMem32].Alignment = Alignment;
- RootBridgeInstance->ResAllocNode[TypeMem32].Status = ResRequested;
- HostBridgeInstance->ResourceSubmited = TRUE;
- }
- }
-
- if (Ptr->AddrSpaceGranularity == 64) {
- if (Ptr->SpecificFlag == 0x06) {
- RootBridgeInstance->ResAllocNode[TypePMem64].Status = ResSubmitted;
- } else {
- RootBridgeInstance->ResAllocNode[TypeMem64].Status = ResSubmitted;
- }
- }
- break;
-
- case 1:
- AddrLen = (UINTN) Ptr->AddrLen;
- Alignment = (UINTN) Ptr->AddrRangeMax;
- RootBridgeInstance->ResAllocNode[TypeIo].Length = AddrLen;
- RootBridgeInstance->ResAllocNode[TypeIo].Alignment = Alignment;
- RootBridgeInstance->ResAllocNode[TypeIo].Status = ResRequested;
- HostBridgeInstance->ResourceSubmited = TRUE;
- break;
-
- default:
- break;
- };
- }
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-GetProposedResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- )
-{
- LIST_ENTRY *List;
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- UINTN Index;
- UINTN Number;
- VOID *Buffer;
- UINT8 *Temp;
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;
- UINT64 ResStatus;
-
- Buffer = NULL;
- Number = 0;
- //
- // Get the Host Bridge Instance from the resource allocation protocol
- //
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- //
- // Enumerate the root bridges in this host bridge
- //
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- for (Index = 0; Index < TypeBus; Index ++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- Number ++;
- }
- }
-
- if (Number == 0) {
- EFI_ACPI_END_TAG_DESCRIPTOR *End;
-
- End = AllocateZeroPool (sizeof *End);
- if (End == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
- End->Desc = ACPI_END_TAG_DESCRIPTOR;
- *Configuration = End;
- return EFI_SUCCESS;
- }
-
- Buffer = AllocateZeroPool (Number * sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR));
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Temp = Buffer;
- for (Index = 0; Index < TypeBus; Index ++) {
- if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) {
- Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ;
- ResStatus = RootBridgeInstance->ResAllocNode[Index].Status;
-
- switch (Index) {
-
- case TypeIo:
- //
- // Io
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 1;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypeMem32:
- //
- // Memory 32
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- Ptr->AddrSpaceGranularity = 32;
- Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = \
- (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS;
- Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length;
- break;
-
- case TypePMem32:
- //
- // Prefetch memory 32
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 6;
- Ptr->AddrSpaceGranularity = 32;
- Ptr->AddrRangeMin = 0;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT;
- Ptr->AddrLen = 0;
- break;
-
- case TypeMem64:
- //
- // Memory 64
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 0;
- Ptr->AddrSpaceGranularity = 64;
- Ptr->AddrRangeMin = 0;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT;
- Ptr->AddrLen = 0;
- break;
-
- case TypePMem64:
- //
- // Prefetch memory 64
- //
- Ptr->Desc = 0x8A;
- Ptr->Len = 0x2B;
- Ptr->ResType = 0;
- Ptr->GenFlag = 0;
- Ptr->SpecificFlag = 6;
- Ptr->AddrSpaceGranularity = 64;
- Ptr->AddrRangeMin = 0;
- Ptr->AddrRangeMax = 0;
- Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT;
- Ptr->AddrLen = 0;
- break;
- };
-
- Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR);
- }
- }
-
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79;
- ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0;
-
- *Configuration = Buffer;
-
- return EFI_SUCCESS;
- }
-
- List = List->ForwardLink;
- }
-
- return EFI_INVALID_PARAMETER;
-}
-
-/**
- Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific action is expected from this
- member function. It allows the host bridge driver to preinitialize individual PCI controllers before
- enumeration.
-
- @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI
- configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for
- the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in
- EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should
- not enumerate this device, including its child devices if it is a PCI-to-PCI
- bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-PreprocessController (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
- )
-{
- PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance;
- PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance;
- LIST_ENTRY *List;
-
- HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This);
- List = HostBridgeInstance->Head.ForwardLink;
-
- //
- // Enumerate the root bridges in this host bridge
- //
- while (List != &HostBridgeInstance->Head) {
- RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List);
- if (RootBridgeHandle == RootBridgeInstance->Handle) {
- break;
- }
- List = List->ForwardLink;
- }
- if (List == &HostBridgeInstance->Head) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((UINT32)Phase > EfiPciBeforeResourceCollection) {
- return EFI_INVALID_PARAMETER;
- }
-
- return EFI_SUCCESS;
-}
deleted file mode 100644
@@ -1,499 +0,0 @@
-/** @file
- The Header file of the Pci Host Bridge Driver
-
- Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials are
- licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _PCI_HOST_BRIDGE_H_
-#define _PCI_HOST_BRIDGE_H_
-
-#include <PiDxe.h>
-
-#include <IndustryStandard/Pci.h>
-#include <IndustryStandard/Acpi.h>
-
-#include <Protocol/PciHostBridgeResourceAllocation.h>
-#include <Protocol/PciRootBridgeIo.h>
-#include <Protocol/Metronome.h>
-#include <Protocol/DevicePath.h>
-#include <Protocol/FdtClient.h>
-
-
-#include <Library/BaseLib.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/DxeServicesTableLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/IoLib.h>
-#include <Library/PciLib.h>
-#include <Library/PcdLib.h>
-
-//
-// Hard code the host bridge number in the platform.
-// In this chipset, there is only one host bridge.
-//
-#define HOST_BRIDGE_NUMBER 1
-
-#define MAX_PCI_DEVICE_NUMBER 31
-#define MAX_PCI_FUNCTION_NUMBER 7
-#define MAX_PCI_REG_ADDRESS (SIZE_4KB - 1)
-
-typedef enum {
- IoOperation,
- MemOperation,
- PciOperation
-} OPERATION_TYPE;
-
-#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't')
-typedef struct {
- UINTN Signature;
- EFI_HANDLE HostBridgeHandle;
- UINTN RootBridgeNumber;
- LIST_ENTRY Head;
- BOOLEAN ResourceSubmited;
- BOOLEAN CanRestarted;
- EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc;
-} PCI_HOST_BRIDGE_INSTANCE;
-
-#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \
- CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE)
-
-//
-// HostBridge Resource Allocation interface
-//
-
-/**
- These are the notifications from the PCI bus driver that it is about to enter a certain
- phase of the PCI enumeration process.
-
- This member function can be used to notify the host bridge driver to perform specific actions,
- including any chipset-specific initialization, so that the chipset is ready to enter the next phase.
- Eight notification points are defined at this time. See belows:
- EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data
- structures. The PCI enumerator should issue this notification
- before starting a fresh enumeration process. Enumeration cannot
- be restarted after sending any other notification such as
- EfiPciHostBridgeBeginBusAllocation.
- EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is
- required here. This notification can be used to perform any
- chipset-specific programming.
- EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No
- specific action is required here. This notification can be used to
- perform any chipset-specific programming.
- EfiPciHostBridgeBeginResourceAllocation
- The resource allocation phase is about to begin. No specific
- action is required here. This notification can be used to perform
- any chipset-specific programming.
- EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI
- root bridges. These resource settings are returned on the next call to
- GetProposedResources(). Before calling NotifyPhase() with a Phase of
- EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible
- for gathering I/O and memory requests for
- all the PCI root bridges and submitting these requests using
- SubmitResources(). This function pads the resource amount
- to suit the root bridge hardware, takes care of dependencies between
- the PCI root bridges, and calls the Global Coherency Domain (GCD)
- with the allocation request. In the case of padding, the allocated range
- could be bigger than what was requested.
- EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated
- resources (proposed resources) for all the PCI root bridges. After the
- hardware is programmed, reassigning resources will not be supported.
- The bus settings are not affected.
- EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI
- root bridges and resets the I/O and memory apertures to their initial
- state. The bus settings are not affected. If the request to allocate
- resources fails, the PCI enumerator can use this notification to
- deallocate previous resources, adjust the requests, and retry
- allocation.
- EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is
- required here. This notification can be used to perform any chipsetspecific
- programming.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] Phase The phase during enumeration
-
- @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error
- is valid for a Phase of EfiPciHostBridgeAllocateResources if
- SubmitResources() has not been called for one or more
- PCI root bridges before this call
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid
- for a Phase of EfiPciHostBridgeSetResources.
- @retval EFI_INVALID_PARAMETER Invalid phase parameter
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the
- previously submitted resource requests cannot be fulfilled or
- were only partially fulfilled.
- @retval EFI_SUCCESS The notification was accepted without any errors.
-
-**/
-EFI_STATUS
-EFIAPI
-NotifyPhase(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase
- );
-
-/**
- Return the device handle of the next PCI root bridge that is associated with this Host Bridge.
-
- This function is called multiple times to retrieve the device handles of all the PCI root bridges that
- are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI
- root bridges. On each call, the handle that was returned by the previous call is passed into the
- interface, and on output the interface returns the device handle of the next PCI root bridge. The
- caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
- for that root bridge. When there are no more PCI root bridges to report, the interface returns
- EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they
- are returned by this function.
- For D945 implementation, there is only one root bridge in PCI host bridge.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge.
-
- @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the
- specific Host bridge and return EFI_SUCCESS.
- @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was
- returned on a previous call to GetNextRootBridge().
-**/
-EFI_STATUS
-EFIAPI
-GetNextRootBridge(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN OUT EFI_HANDLE *RootBridgeHandle
- );
-
-/**
- Returns the allocation attributes of a PCI root bridge.
-
- The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary
- from one PCI root bridge to another. These attributes are different from the decode-related
- attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The
- RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device
- handles of all the root bridges that are associated with this host bridge must be obtained by calling
- GetNextRootBridge(). The attributes are static in the sense that they do not change during or
- after the enumeration process. The hardware may provide mechanisms to change the attributes on
- the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is
- installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in
- "Related Definitions" below. The caller uses these attributes to combine multiple resource requests.
- For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to
- include requests for the prefetchable memory in the nonprefetchable memory pool and not request any
- prefetchable memory.
- Attribute Description
- ------------------------------------ ----------------------------------------------------------------------
- EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate
- windows for nonprefetchable and prefetchable memory. A PCI bus
- driver needs to include requests for prefetchable memory in the
- nonprefetchable memory pool.
-
- EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory
- windows. If this bit is not set, the PCI bus driver needs to include
- requests for a 64-bit memory address in the corresponding 32-bit
- memory pool.
-
- @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL
- @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type
- EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Attributes The pointer to attribte of root bridge, it is output parameter
-
- @retval EFI_INVALID_PARAMETER Attribute pointer is NULL
- @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid.
- @retval EFI_SUCCESS Success to get attribute of interested root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-GetAttributes(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT UINT64 *Attributes
- );
-
-/**
- Sets up the specified PCI root bridge for the bus enumeration process.
-
- This member function sets up the root bridge for bus enumeration and returns the PCI bus range
- over which the search should be performed in ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI Root Bridge to be set up.
- @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor.
-
- @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle
- @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag.
- @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor.
-
-**/
-EFI_STATUS
-EFIAPI
-StartBusEnumeration(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- );
-
-/**
- Programs the PCI root bridge hardware so that it decodes the specified PCI bus range.
-
- This member function programs the specified PCI root bridge to decode the bus range that is
- specified by the input parameter Configuration.
- The bus range information is specified in terms of the ACPI 2.0 resource descriptor format.
-
- @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance
- @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed
- @param[in] Configuration The pointer to the PCI bus resource descriptor
-
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than
- bus descriptors.
- @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors.
- @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed.
-
-**/
-EFI_STATUS
-EFIAPI
-SetBusNumbers(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- );
-
-/**
- Submits the I/O and memory resource requirements for the specified PCI root bridge.
-
- This function is used to submit all the I/O and memory resources that are required by the specified
- PCI root bridge. The input parameter Configuration is used to specify the following:
- - The various types of resources that are required
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted.
- @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor.
-
- @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor.
- @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are
- not supported by this PCI root bridge. This error will happen if the caller
- did not combine resources according to Attributes that were returned by
- GetAllocAttributes().
- @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid.
- @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-SubmitResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN VOID *Configuration
- );
-
-/**
- Returns the proposed resource settings for the specified PCI root bridge.
-
- This member function returns the proposed resource settings for the specified PCI root bridge. The
- proposed resource settings are prepared when NotifyPhase() is called with a Phase of
- EfiPciHostBridgeAllocateResources. The output parameter Configuration
- specifies the following:
- - The various types of resources, excluding bus resources, that are allocated
- - The associated lengths in terms of ACPI 2.0 resource descriptor format
-
- @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-GetProposedResources(
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- OUT VOID **Configuration
- );
-
-/**
- Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various
- stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual
- PCI controllers before enumeration.
-
- This function is called during the PCI enumeration process. No specific action is expected from this
- member function. It allows the host bridge driver to preinitialize individual PCI controllers before
- enumeration.
-
- @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance.
- @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in
- InstallProtocolInterface() in the UEFI 2.0 Specification.
- @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI
- configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for
- the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS.
- @param Phase The phase of the PCI device enumeration.
-
- @retval EFI_SUCCESS The requested parameters were returned.
- @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle.
- @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in
- EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE.
- @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should
- not enumerate this device, including its child devices if it is a PCI-to-PCI
- bridge.
-
-**/
-EFI_STATUS
-EFIAPI
-PreprocessController (
- IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This,
- IN EFI_HANDLE RootBridgeHandle,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress,
- IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase
- );
-
-
-//
-// Define resource status constant
-//
-#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL
-#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL
-
-
-//
-// Driver Instance Data Prototypes
-//
-
-typedef struct {
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation;
- UINTN NumberOfBytes;
- UINTN NumberOfPages;
- EFI_PHYSICAL_ADDRESS HostAddress;
- EFI_PHYSICAL_ADDRESS MappedHostAddress;
-} MAP_INFO;
-
-typedef struct {
- ACPI_HID_DEVICE_PATH AcpiDevicePath;
- EFI_DEVICE_PATH_PROTOCOL EndDevicePath;
-} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH;
-
-typedef struct {
- UINT64 BusBase;
- UINT64 BusLimit;
-
- UINT64 MemBase;
- UINT64 MemLimit;
-
- UINT64 IoBase;
- UINT64 IoLimit;
- UINT64 IoTranslation;
-} PCI_ROOT_BRIDGE_RESOURCE_APERTURE;
-
-typedef enum {
- TypeIo = 0,
- TypeMem32,
- TypePMem32,
- TypeMem64,
- TypePMem64,
- TypeBus,
- TypeMax
-} PCI_RESOURCE_TYPE;
-
-typedef enum {
- ResNone = 0,
- ResSubmitted,
- ResRequested,
- ResAllocated,
- ResStatusMax
-} RES_STATUS;
-
-typedef struct {
- PCI_RESOURCE_TYPE Type;
- UINT64 Base;
- UINT64 Length;
- UINT64 Alignment;
- RES_STATUS Status;
-} PCI_RES_NODE;
-
-#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b')
-
-typedef struct {
- UINT32 Signature;
- LIST_ENTRY Link;
- EFI_HANDLE Handle;
- UINT64 RootBridgeAttrib;
- UINT64 Attributes;
- UINT64 Supports;
-
- //
- // Specific for this memory controller: Bus, I/O, Mem
- //
- PCI_RES_NODE ResAllocNode[6];
-
- //
- // Addressing for Memory and I/O and Bus arrange
- //
- UINT64 BusBase;
- UINT64 MemBase;
- UINT64 IoBase;
- UINT64 BusLimit;
- UINT64 MemLimit;
- UINT64 IoLimit;
- UINT64 IoTranslation;
-
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io;
-
-} PCI_ROOT_BRIDGE_INSTANCE;
-
-
-//
-// Driver Instance Data Macros
-//
-#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \
- CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE)
-
-
-#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \
- CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE)
-
-/**
-
- Construct the Pci Root Bridge Io protocol
-
- @param Protocol Point to protocol instance
- @param HostBridgeHandle Handle of host bridge
- @param Attri Attribute of host bridge
- @param ResAperture ResourceAperture for host bridge
-
- @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
-**/
-EFI_STATUS
-RootBridgeConstructor (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
- IN EFI_HANDLE HostBridgeHandle,
- IN UINT64 Attri,
- IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture
- );
-
-#endif
deleted file mode 100644
@@ -1,64 +0,0 @@
-## @file
-# The basic interfaces implementation to a single segment PCI Host Bridge driver.
-#
-# Copyright (c) 2008 - 2014, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-##
-
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = PciHostBridge
- FILE_GUID = 9f609346-37cb-4eb7-801f-f55099373998
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
-
- ENTRY_POINT = InitializePciHostBridge
-
-[Packages]
- MdeModulePkg/MdeModulePkg.dec
- MdePkg/MdePkg.dec
- ArmVirtPkg/ArmVirtPkg.dec
-
-[LibraryClasses]
- UefiDriverEntryPoint
- UefiBootServicesTableLib
- DxeServicesTableLib
- UefiLib
- MemoryAllocationLib
- BaseMemoryLib
- BaseLib
- DebugLib
- DevicePathLib
- IoLib
- PciLib
- PcdLib
-
-[Sources]
- PciHostBridge.c
- PciRootBridgeIo.c
- PciHostBridge.h
-
-[Protocols]
- gEfiPciHostBridgeResourceAllocationProtocolGuid ## PRODUCES
- gEfiPciRootBridgeIoProtocolGuid ## PRODUCES
- gEfiMetronomeArchProtocolGuid ## CONSUMES
- gEfiDevicePathProtocolGuid ## PRODUCES
- gFdtClientProtocolGuid ## CONSUMES
-
-[Pcd]
- gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress
-
-[FeaturePcd]
- gArmVirtTokenSpaceGuid.PcdPureAcpiBoot
-
-[depex]
- gEfiMetronomeArchProtocolGuid AND
- gEfiCpuArchProtocolGuid AND
- gFdtClientProtocolGuid
deleted file mode 100644
@@ -1,2144 +0,0 @@
-/** @file
- PCI Root Bridge Io Protocol implementation
-
-Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials are
-licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "PciHostBridge.h"
-
-typedef struct {
- EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesp[TypeMax];
- EFI_ACPI_END_TAG_DESCRIPTOR EndDesp;
-} RESOURCE_CONFIGURATION;
-
-RESOURCE_CONFIGURATION Configuration = {
- {{0x8A, 0x2B, 1, 0, 0, 0, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 0, 32, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 6, 32, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 0, 64, 0, 0, 0, 0},
- {0x8A, 0x2B, 0, 0, 6, 64, 0, 0, 0, 0},
- {0x8A, 0x2B, 2, 0, 0, 0, 0, 0, 0, 0}},
- {0x79, 0}
-};
-
-//
-// Protocol Member Function Prototypes
-//
-
-/**
- Polls an address in memory mapped I/O space until an exit condition is met, or
- a timeout occurs.
-
- This function provides a standard way to poll a PCI memory location. A PCI memory read
- operation is performed at the PCI memory address specified by Address for the width specified
- by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
- read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
- Mask) is equal to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the memory operations. The caller is
- responsible for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the memory address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- );
-
-/**
- Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
- satisfied or after a defined duration.
-
- This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
- performed at the PCI I/O address specified by Address for the width specified by Width.
- The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
- repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
- to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the I/O operations.
- @param[in] Address The base address of the I/O operations. The caller is responsible
- for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the I/O address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollIo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 UserAddress,
- IN UINTN Count,
- OUT VOID *UserBuffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[in] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 UserAddress,
- IN UINTN Count,
- IN VOID *UserBuffer
- );
-
-/**
- Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
- root bridge memory space.
-
- The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
- space to another region of PCI root bridge memory space. This is especially useful for video scroll
- operation on a memory mapped video buffer.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI root bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] DestAddress The destination address of the memory operation. The caller is
- responsible for aligning the DestAddress if required.
- @param[in] SrcAddress The source address of the memory operation. The caller is
- responsible for aligning the SrcAddress if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at DestAddress and SrcAddress.
-
- @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoCopyMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 DestAddress,
- IN UINT64 SrcAddress,
- IN UINTN Count
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- );
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- );
-
-/**
- Provides the PCI controller-specific addresses required to access system memory from a
- DMA bus master.
-
- The Map() function provides the PCI controller specific addresses needed to access system
- memory. This function is used to map system memory for PCI bus master DMA accesses.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Operation Indicates if the bus master is going to read or write to system memory.
- @param[in] HostAddress The system memory address to map to the PCI controller.
- @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
- @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
- to access the system memory's HostAddress.
- @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
-
- @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_INVALID_PARAMETER Operation is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
- @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
- @retval EFI_INVALID_PARAMETER Mapping is NULL.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
- @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
- IN VOID *HostAddress,
- IN OUT UINTN *NumberOfBytes,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- );
-
-/**
- Completes the Map() operation and releases any corresponding resources.
-
- The Unmap() function completes the Map() operation and releases any corresponding resources.
- If the operation was an EfiPciOperationBusMasterWrite or
- EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
- Any resources used for the mapping are freed.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Mapping The mapping value returned from Map().
-
- @retval EFI_SUCCESS The range was unmapped.
- @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
- @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoUnmap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN VOID *Mapping
- );
-
-/**
- Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
- EfiPciOperationBusMasterCommonBuffer64 mapping.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Type This parameter is not used and must be ignored.
- @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the allocated range.
- @param Attributes The requested bit mask of attributes for the allocated range. Only
- the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
- and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_INVALID_PARAMETER MemoryType is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoAllocateBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_ALLOCATE_TYPE Type,
- IN EFI_MEMORY_TYPE MemoryType,
- IN UINTN Pages,
- OUT VOID **HostAddress,
- IN UINT64 Attributes
- );
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
- @retval EFI_SUCCESS The requested memory pages were freed.
- @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
- was not allocated with AllocateBuffer().
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFreeBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINTN Pages,
- OUT VOID *HostAddress
- );
-
-/**
- Flushes all PCI posted write transactions from a PCI host bridge to system memory.
-
- The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
- memory. Posted write transactions are generated by PCI bus masters when they perform write
- transactions to target addresses in system memory.
- This function does not flush posted write transactions from any PCI bridges. A PCI controller
- specific action must be taken to guarantee that the posted write transactions have been flushed from
- the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
- a PCI read transaction from the PCI controller prior to calling Flush().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
-
- @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
- bridge to system memory.
- @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
- host bridge due to a hardware error.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFlush (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
- );
-
-/**
- Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
- attributes that a PCI root bridge is currently using.
-
- The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
- and the mask of attributes that the PCI root bridge is currently using.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Supported A pointer to the mask of attributes that this PCI root bridge
- supports setting with SetAttributes().
- @param Attributes A pointer to the mask of attributes that this PCI root bridge is
- currently using.
-
- @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
- bridge supports is returned in Supports. If Attributes is
- not NULL, then the attributes that the PCI root bridge is currently
- using is returned in Attributes.
- @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoGetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT UINT64 *Supported,
- OUT UINT64 *Attributes
- );
-
-/**
- Sets attributes for a resource range on a PCI root bridge.
-
- The SetAttributes() function sets the attributes specified in Attributes for the PCI root
- bridge on the resource range specified by ResourceBase and ResourceLength. Since the
- granularity of setting these attributes may vary from resource type to resource type, and from
- platform to platform, the actual resource range and the one passed in by the caller may differ. As a
- result, this function may set the attributes specified by Attributes on a larger resource range
- than the caller requested. The actual range is returned in ResourceBase and
- ResourceLength. The caller is responsible for verifying that the actual range for which the
- attributes were set is acceptable.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Attributes The mask of attributes to set. If the attribute bit
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
- MEMORY_DISABLE is set, then the resource range is specified by
- ResourceBase and ResourceLength. If
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
- MEMORY_DISABLE are not set, then ResourceBase and
- ResourceLength are ignored, and may be NULL.
- @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
- by the attributes specified by Attributes.
- @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
- attributes specified by Attributes.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoSetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINT64 Attributes,
- IN OUT UINT64 *ResourceBase,
- IN OUT UINT64 *ResourceLength
- );
-
-/**
- Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
- resource descriptors.
-
- There are only two resource descriptor types from the ACPI Specification that may be used to
- describe the current resources allocated to a PCI root bridge. These are the QWORD Address
- Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
- QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
- or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
- Address Space Descriptors followed by an End Tag.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
- current configuration of this PCI root bridge. The storage for the
- ACPI 2.0 resource descriptors is allocated by this function. The
- caller must treat the return buffer as read-only data, and the buffer
- must not be freed by the caller.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoConfiguration (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT VOID **Resources
- );
-
-//
-// Memory Controller Pci Root Bridge Io Module Variables
-//
-EFI_METRONOME_ARCH_PROTOCOL *mMetronome;
-
-//
-// Lookup table for increment values based on transfer widths
-//
-UINT8 mInStride[] = {
- 1, // EfiPciWidthUint8
- 2, // EfiPciWidthUint16
- 4, // EfiPciWidthUint32
- 8, // EfiPciWidthUint64
- 0, // EfiPciWidthFifoUint8
- 0, // EfiPciWidthFifoUint16
- 0, // EfiPciWidthFifoUint32
- 0, // EfiPciWidthFifoUint64
- 1, // EfiPciWidthFillUint8
- 2, // EfiPciWidthFillUint16
- 4, // EfiPciWidthFillUint32
- 8 // EfiPciWidthFillUint64
-};
-
-//
-// Lookup table for increment values based on transfer widths
-//
-UINT8 mOutStride[] = {
- 1, // EfiPciWidthUint8
- 2, // EfiPciWidthUint16
- 4, // EfiPciWidthUint32
- 8, // EfiPciWidthUint64
- 1, // EfiPciWidthFifoUint8
- 2, // EfiPciWidthFifoUint16
- 4, // EfiPciWidthFifoUint32
- 8, // EfiPciWidthFifoUint64
- 0, // EfiPciWidthFillUint8
- 0, // EfiPciWidthFillUint16
- 0, // EfiPciWidthFillUint32
- 0 // EfiPciWidthFillUint64
-};
-
-/**
-
- Construct the Pci Root Bridge Io protocol
-
- @param Protocol Point to protocol instance
- @param HostBridgeHandle Handle of host bridge
- @param Attri Attribute of host bridge
- @param ResAperture ResourceAperture for host bridge
-
- @retval EFI_SUCCESS Success to initialize the Pci Root Bridge.
-
-**/
-EFI_STATUS
-RootBridgeConstructor (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol,
- IN EFI_HANDLE HostBridgeHandle,
- IN UINT64 Attri,
- IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture
- )
-{
- EFI_STATUS Status;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- PCI_RESOURCE_TYPE Index;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (Protocol);
-
- //
- // The host to PCI bridge. The host memory addresses are direct mapped to PCI
- // addresses, so there's no need to translate them. IO addresses need
- // translation however.
- //
- PrivateData->MemBase = ResAperture->MemBase;
- PrivateData->IoBase = ResAperture->IoBase;
- PrivateData->IoTranslation = ResAperture->IoTranslation;
-
- //
- // The host bridge only supports 32bit addressing for memory
- // and standard IA32 16bit io
- //
- PrivateData->MemLimit = ResAperture->MemLimit;
- PrivateData->IoLimit = ResAperture->IoLimit;
-
- //
- // Bus Aperture for this Root Bridge (Possible Range)
- //
- PrivateData->BusBase = ResAperture->BusBase;
- PrivateData->BusLimit = ResAperture->BusLimit;
-
- //
- // Specific for this chipset
- //
- for (Index = TypeIo; Index < TypeMax; Index++) {
- PrivateData->ResAllocNode[Index].Type = Index;
- PrivateData->ResAllocNode[Index].Base = 0;
- PrivateData->ResAllocNode[Index].Length = 0;
- PrivateData->ResAllocNode[Index].Status = ResNone;
- }
-
- PrivateData->RootBridgeAttrib = Attri;
-
- PrivateData->Supports = EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | \
- EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | \
- EFI_PCI_ATTRIBUTE_VGA_MEMORY | \
- EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16;
- PrivateData->Attributes = PrivateData->Supports;
-
- Protocol->ParentHandle = HostBridgeHandle;
-
- Protocol->PollMem = RootBridgeIoPollMem;
- Protocol->PollIo = RootBridgeIoPollIo;
-
- Protocol->Mem.Read = RootBridgeIoMemRead;
- Protocol->Mem.Write = RootBridgeIoMemWrite;
-
- Protocol->Io.Read = RootBridgeIoIoRead;
- Protocol->Io.Write = RootBridgeIoIoWrite;
-
- Protocol->CopyMem = RootBridgeIoCopyMem;
-
- Protocol->Pci.Read = RootBridgeIoPciRead;
- Protocol->Pci.Write = RootBridgeIoPciWrite;
-
- Protocol->Map = RootBridgeIoMap;
- Protocol->Unmap = RootBridgeIoUnmap;
-
- Protocol->AllocateBuffer = RootBridgeIoAllocateBuffer;
- Protocol->FreeBuffer = RootBridgeIoFreeBuffer;
-
- Protocol->Flush = RootBridgeIoFlush;
-
- Protocol->GetAttributes = RootBridgeIoGetAttributes;
- Protocol->SetAttributes = RootBridgeIoSetAttributes;
-
- Protocol->Configuration = RootBridgeIoConfiguration;
-
- Protocol->SegmentNumber = 0;
-
- Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **)&mMetronome);
- ASSERT_EFI_ERROR (Status);
-
- return EFI_SUCCESS;
-}
-
-/**
- Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO.
-
- The I/O operations are carried out exactly as requested. The caller is responsible
- for satisfying any alignment and I/O width restrictions that a PI System on a
- platform might require. For example on some platforms, width requests of
- EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will
- be handled by the driver.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] OperationType I/O operation type: IO/MMIO/PCI.
- @param[in] Width Signifies the width of the I/O or Memory operation.
- @param[in] Address The base address of the I/O operation.
- @param[in] Count The number of I/O operations to perform. The number of
- bytes moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results.
- For write operations, the source buffer from which to write data.
-
- @retval EFI_SUCCESS The parameters for this request pass the checks.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.
- @retval EFI_UNSUPPORTED The address range specified by Address, Width,
- and Count is not valid for this PI system.
-
-**/
-EFI_STATUS
-RootBridgeIoCheckParameter (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN OPERATION_TYPE OperationType,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr;
- UINT32 Stride;
- UINT64 Base;
- UINT64 Limit;
-
- //
- // Check to see if Buffer is NULL
- //
- if (Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check to see if Width is in the valid range
- //
- if ((UINT32)Width >= EfiPciWidthMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // For FIFO type, the target address won't increase during the access,
- // so treat Count as 1
- //
- if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) {
- Count = 1;
- }
-
- //
- // Check to see if Width is in the valid range for I/O Port operations
- //
- Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
- if ((OperationType != MemOperation) && (Width == EfiPciWidthUint64)) {
- ASSERT (FALSE);
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Check to see if Address is aligned
- //
- Stride = mInStride[Width];
- if ((Address & (UINT64)(Stride - 1)) != 0) {
- return EFI_UNSUPPORTED;
- }
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
-
- //
- // Check to see if any address associated with this transfer exceeds the maximum
- // allowed address. The maximum address implied by the parameters passed in is
- // Address + Size * Count. If the following condition is met, then the transfer
- // is not supported.
- //
- // Address + Size * Count > Limit + 1
- //
- // Since Limit can be the maximum integer value supported by the CPU and Count
- // can also be the maximum integer value supported by the CPU, this range
- // check must be adjusted to avoid all oveflow conditions.
- //
- if (OperationType == IoOperation) {
- Base = PrivateData->IoBase;
- Limit = PrivateData->IoLimit;
- } else if (OperationType == MemOperation) {
- Base = PrivateData->MemBase;
- Limit = PrivateData->MemLimit;
- } else {
- PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address;
- if (PciRbAddr->Bus < PrivateData->BusBase || PciRbAddr->Bus > PrivateData->BusLimit) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (PciRbAddr->Device > MAX_PCI_DEVICE_NUMBER || PciRbAddr->Function > MAX_PCI_FUNCTION_NUMBER) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (PciRbAddr->ExtendedRegister != 0) {
- Address = PciRbAddr->ExtendedRegister;
- } else {
- Address = PciRbAddr->Register;
- }
- Base = 0;
- Limit = MAX_PCI_REG_ADDRESS;
- }
-
- if (Limit < Address) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (Address < Base) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Base <= Address <= Limit
- //
- if (Address == 0 && Limit == MAX_UINT64) {
- //
- // 2^64 bytes are valid to transfer. With Stride == 1, that's simply
- // impossible to reach in Count; with Stride in {2, 4, 8}, we can divide
- // both 2^64 and Stride with 2.
- //
- if (Stride > 1 && Count > DivU64x32 (BIT63, Stride / 2)) {
- return EFI_UNSUPPORTED;
- }
- } else {
- //
- // (Limit - Address) does not wrap, and it is smaller than MAX_UINT64.
- //
- if (Count > DivU64x32 (Limit - Address + 1, Stride)) {
- return EFI_UNSUPPORTED;
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Internal help function for read and write memory space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Write Switch value for Read or Write.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-RootBridgeIoMemRW (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN BOOLEAN Write,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN OUT VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINT8 InStride;
- UINT8 OutStride;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
-
- Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, Count, Buffer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (Write) {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- MmioWrite8 ((UINTN)Address, *Uint8Buffer);
- break;
- case EfiPciWidthUint16:
- MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
- break;
- case EfiPciWidthUint32:
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- break;
- case EfiPciWidthUint64:
- MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer));
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- } else {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- *Uint8Buffer = MmioRead8 ((UINTN)Address);
- break;
- case EfiPciWidthUint16:
- *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
- break;
- case EfiPciWidthUint32:
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- break;
- case EfiPciWidthUint64:
- *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address);
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Internal help function for read and write IO space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Write Switch value for Read or Write.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-RootBridgeIoIoRW (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN BOOLEAN Write,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN OUT VOID *Buffer
- )
-{
- EFI_STATUS Status;
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- UINT8 InStride;
- UINT8 OutStride;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
-
- Status = RootBridgeIoCheckParameter (This, IoOperation, Width, Address, Count, Buffer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
- //
- // The addition below is performed in UINT64 modular arithmetic, in
- // accordance with the definition of PcdPciIoTranslation in
- // "ArmPlatformPkg.dec". Meaning, the addition below may in fact *decrease*
- // Address, implementing a negative offset translation.
- //
- Address += PrivateData->IoTranslation;
-
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
-
- for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) {
- if (Write) {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- MmioWrite8 ((UINTN)Address, *Uint8Buffer);
- break;
- case EfiPciWidthUint16:
- MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer));
- break;
- case EfiPciWidthUint32:
- MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer));
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- } else {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- *Uint8Buffer = MmioRead8 ((UINTN)Address);
- break;
- case EfiPciWidthUint16:
- *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address);
- break;
- case EfiPciWidthUint32:
- *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address);
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Internal help function for read and write PCI configuration space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Write Switch value for Read or Write.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] UserAddress The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-RootBridgeIoPciRW (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN BOOLEAN Write,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN OUT VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINT8 InStride;
- UINT8 OutStride;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth;
- UINT8 *Uint8Buffer;
- EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr;
- UINTN PcieRegAddr;
-
- Status = RootBridgeIoCheckParameter (This, PciOperation, Width, Address, Count, Buffer);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address;
-
- PcieRegAddr = (UINTN) PCI_LIB_ADDRESS (
- PciRbAddr->Bus,
- PciRbAddr->Device,
- PciRbAddr->Function,
- (PciRbAddr->ExtendedRegister != 0) ? \
- PciRbAddr->ExtendedRegister :
- PciRbAddr->Register
- );
-
- InStride = mInStride[Width];
- OutStride = mOutStride[Width];
- OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03);
- for (Uint8Buffer = Buffer; Count > 0; PcieRegAddr += InStride, Uint8Buffer += OutStride, Count--) {
- if (Write) {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- PciWrite8 (PcieRegAddr, *Uint8Buffer);
- break;
- case EfiPciWidthUint16:
- PciWrite16 (PcieRegAddr, *((UINT16 *)Uint8Buffer));
- break;
- case EfiPciWidthUint32:
- PciWrite32 (PcieRegAddr, *((UINT32 *)Uint8Buffer));
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- } else {
- switch (OperationWidth) {
- case EfiPciWidthUint8:
- *Uint8Buffer = PciRead8 (PcieRegAddr);
- break;
- case EfiPciWidthUint16:
- *((UINT16 *)Uint8Buffer) = PciRead16 (PcieRegAddr);
- break;
- case EfiPciWidthUint32:
- *((UINT32 *)Uint8Buffer) = PciRead32 (PcieRegAddr);
- break;
- default:
- //
- // The RootBridgeIoCheckParameter call above will ensure that this
- // path is not taken.
- //
- ASSERT (FALSE);
- break;
- }
- }
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Polls an address in memory mapped I/O space until an exit condition is met, or
- a timeout occurs.
-
- This function provides a standard way to poll a PCI memory location. A PCI memory read
- operation is performed at the PCI memory address specified by Address for the width specified
- by Width. The result of this PCI memory read operation is stored in Result. This PCI memory
- read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result &
- Mask) is equal to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the memory operations. The caller is
- responsible for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the memory address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- )
-{
- EFI_STATUS Status;
- UINT64 NumberOfTicks;
- UINT32 Remainder;
-
- if (Result == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((UINT32)Width > EfiPciWidthUint64) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // No matter what, always do a single poll.
- //
- Status = This->Mem.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- if (Delay == 0) {
- return EFI_SUCCESS;
-
- } else {
-
- //
- // Determine the proper # of metronome ticks to wait for polling the
- // location. The nuber of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
- // The "+1" to account for the possibility of the first tick being short
- // because we started in the middle of a tick.
- //
- // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome
- // protocol definition is updated.
- //
- NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, &Remainder);
- if (Remainder != 0) {
- NumberOfTicks += 1;
- }
- NumberOfTicks += 1;
-
- while (NumberOfTicks != 0) {
-
- mMetronome->WaitForTick (mMetronome, 1);
-
- Status = This->Mem.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- NumberOfTicks -= 1;
- }
- }
- return EFI_TIMEOUT;
-}
-
-/**
- Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is
- satisfied or after a defined duration.
-
- This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is
- performed at the PCI I/O address specified by Address for the width specified by Width.
- The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is
- repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal
- to Value.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the I/O operations.
- @param[in] Address The base address of the I/O operations. The caller is responsible
- for aligning Address if required.
- @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask
- are ignored. The bits in the bytes below Width which are zero in
- Mask are ignored when polling the I/O address.
- @param[in] Value The comparison value used for the polling exit criteria.
- @param[in] Delay The number of 100 ns units to poll. Note that timer available may
- be of poorer granularity.
- @param[out] Result Pointer to the last value read from the memory location.
-
- @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria.
- @retval EFI_INVALID_PARAMETER Width is invalid.
- @retval EFI_INVALID_PARAMETER Result is NULL.
- @retval EFI_TIMEOUT Delay expired before a match occurred.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPollIo (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINT64 Mask,
- IN UINT64 Value,
- IN UINT64 Delay,
- OUT UINT64 *Result
- )
-{
- EFI_STATUS Status;
- UINT64 NumberOfTicks;
- UINT32 Remainder;
-
- //
- // No matter what, always do a single poll.
- //
-
- if (Result == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if ((UINT32)Width > EfiPciWidthUint64) {
- return EFI_INVALID_PARAMETER;
- }
-
- Status = This->Io.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- if (Delay == 0) {
- return EFI_SUCCESS;
-
- } else {
-
- //
- // Determine the proper # of metronome ticks to wait for polling the
- // location. The number of ticks is Roundup (Delay / mMetronome->TickPeriod)+1
- // The "+1" to account for the possibility of the first tick being short
- // because we started in the middle of a tick.
- //
- NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, &Remainder);
- if (Remainder != 0) {
- NumberOfTicks += 1;
- }
- NumberOfTicks += 1;
-
- while (NumberOfTicks != 0) {
-
- mMetronome->WaitForTick (mMetronome, 1);
-
- Status = This->Io.Read (This, Width, Address, 1, Result);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- if ((*Result & Mask) == Value) {
- return EFI_SUCCESS;
- }
-
- NumberOfTicks -= 1;
- }
- }
- return EFI_TIMEOUT;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- return RootBridgeIoMemRW (This, FALSE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space.
-
- The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller
- registers in the PCI root bridge memory space.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI Root Bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operation.
- @param[in] Address The base address of the memory operation. The caller is
- responsible for aligning the Address if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMemWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- return RootBridgeIoMemRW (This, TRUE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- return RootBridgeIoIoRW (This, FALSE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The base address of the I/O operation. The caller is responsible for
- aligning the Address if required.
- @param[in] Count The number of I/O operations to perform. Bytes moved is Width
- size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoIoWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- return RootBridgeIoIoRW (This, TRUE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI
- root bridge memory space.
-
- The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory
- space to another region of PCI root bridge memory space. This is especially useful for video scroll
- operation on a memory mapped video buffer.
- The memory operations are carried out exactly as requested. The caller is responsible for satisfying
- any alignment and memory width restrictions that a PCI root bridge on a platform might require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] DestAddress The destination address of the memory operation. The caller is
- responsible for aligning the DestAddress if required.
- @param[in] SrcAddress The source address of the memory operation. The caller is
- responsible for aligning the SrcAddress if required.
- @param[in] Count The number of memory operations to perform. Bytes moved is
- Width size * Count, starting at DestAddress and SrcAddress.
-
- @retval EFI_SUCCESS The data was copied from one memory region to another memory region.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoCopyMem (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 DestAddress,
- IN UINT64 SrcAddress,
- IN UINTN Count
- )
-{
- EFI_STATUS Status;
- BOOLEAN Direction;
- UINTN Stride;
- UINTN Index;
- UINT64 Result;
-
- if ((UINT32)Width > EfiPciWidthUint64) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (DestAddress == SrcAddress) {
- return EFI_SUCCESS;
- }
-
- Stride = (UINTN)(1 << Width);
-
- Direction = TRUE;
- if ((DestAddress > SrcAddress) && (DestAddress < (SrcAddress + Count * Stride))) {
- Direction = FALSE;
- SrcAddress = SrcAddress + (Count-1) * Stride;
- DestAddress = DestAddress + (Count-1) * Stride;
- }
-
- for (Index = 0;Index < Count;Index++) {
- Status = RootBridgeIoMemRead (
- This,
- Width,
- SrcAddress,
- 1,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- Status = RootBridgeIoMemWrite (
- This,
- Width,
- DestAddress,
- 1,
- &Result
- );
- if (EFI_ERROR (Status)) {
- return Status;
- }
- if (Direction) {
- SrcAddress += Stride;
- DestAddress += Stride;
- } else {
- SrcAddress -= Stride;
- DestAddress -= Stride;
- }
- }
- return EFI_SUCCESS;
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[out] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciRead (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- OUT VOID *Buffer
- )
-{
- return RootBridgeIoPciRW (This, FALSE, Width, Address, Count, Buffer);
-}
-
-/**
- Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space.
-
- The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration
- registers for a PCI controller.
- The PCI Configuration operations are carried out exactly as requested. The caller is responsible for
- any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might
- require.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Width Signifies the width of the memory operations.
- @param[in] Address The address within the PCI configuration space for the PCI controller.
- @param[in] Count The number of PCI configuration operations to perform. Bytes
- moved is Width size * Count, starting at Address.
- @param[in] Buffer For read operations, the destination buffer to store the results. For
- write operations, the source buffer to write data from.
-
- @retval EFI_SUCCESS The data was read from or written to the PCI root bridge.
- @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge.
- @retval EFI_INVALID_PARAMETER Buffer is NULL.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoPciWrite (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width,
- IN UINT64 Address,
- IN UINTN Count,
- IN VOID *Buffer
- )
-{
- return RootBridgeIoPciRW (This, TRUE, Width, Address, Count, Buffer);
-}
-
-/**
- Provides the PCI controller-specific addresses required to access system memory from a
- DMA bus master.
-
- The Map() function provides the PCI controller specific addresses needed to access system
- memory. This function is used to map system memory for PCI bus master DMA accesses.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Operation Indicates if the bus master is going to read or write to system memory.
- @param[in] HostAddress The system memory address to map to the PCI controller.
- @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped.
- @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use
- to access the system memory's HostAddress.
- @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete.
-
- @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
- @retval EFI_INVALID_PARAMETER Operation is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL.
- @retval EFI_INVALID_PARAMETER DeviceAddress is NULL.
- @retval EFI_INVALID_PARAMETER Mapping is NULL.
- @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
- @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoMap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation,
- IN VOID *HostAddress,
- IN OUT UINTN *NumberOfBytes,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- )
-{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS PhysicalAddress;
- MAP_INFO *MapInfo;
-
- if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || Mapping == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Initialize the return values to their defaults
- //
- *Mapping = NULL;
-
- //
- // Make sure that Operation is valid
- //
- if ((UINT32)Operation >= EfiPciOperationMaximum) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Most PCAT like chipsets can not handle performing DMA above 4GB.
- // If any part of the DMA transfer being mapped is above 4GB, then
- // map the DMA transfer to a buffer below 4GB.
- //
- PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress;
- if ((PhysicalAddress + *NumberOfBytes) > 0x100000000ULL) {
-
- //
- // Common Buffer operations can not be remapped. If the common buffer
- // if above 4GB, then it is not possible to generate a mapping, so return
- // an error.
- //
- if (Operation == EfiPciOperationBusMasterCommonBuffer || Operation == EfiPciOperationBusMasterCommonBuffer64) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Allocate a MAP_INFO structure to remember the mapping when Unmap() is
- // called later.
- //
- Status = gBS->AllocatePool (
- EfiBootServicesData,
- sizeof(MAP_INFO),
- (VOID **)&MapInfo
- );
- if (EFI_ERROR (Status)) {
- *NumberOfBytes = 0;
- return Status;
- }
-
- //
- // Return a pointer to the MAP_INFO structure in Mapping
- //
- *Mapping = MapInfo;
-
- //
- // Initialize the MAP_INFO structure
- //
- MapInfo->Operation = Operation;
- MapInfo->NumberOfBytes = *NumberOfBytes;
- MapInfo->NumberOfPages = EFI_SIZE_TO_PAGES(*NumberOfBytes);
- MapInfo->HostAddress = PhysicalAddress;
- MapInfo->MappedHostAddress = 0x00000000ffffffff;
-
- //
- // Allocate a buffer below 4GB to map the transfer to.
- //
- Status = gBS->AllocatePages (
- AllocateMaxAddress,
- EfiBootServicesData,
- MapInfo->NumberOfPages,
- &MapInfo->MappedHostAddress
- );
- if (EFI_ERROR (Status)) {
- gBS->FreePool (MapInfo);
- *NumberOfBytes = 0;
- return Status;
- }
-
- //
- // If this is a read operation from the Bus Master's point of view,
- // then copy the contents of the real buffer into the mapped buffer
- // so the Bus Master can read the contents of the real buffer.
- //
- if (Operation == EfiPciOperationBusMasterRead || Operation == EfiPciOperationBusMasterRead64) {
- CopyMem (
- (VOID *)(UINTN)MapInfo->MappedHostAddress,
- (VOID *)(UINTN)MapInfo->HostAddress,
- MapInfo->NumberOfBytes
- );
- }
-
- //
- // The DeviceAddress is the address of the maped buffer below 4GB
- //
- *DeviceAddress = MapInfo->MappedHostAddress;
- } else {
- //
- // The transfer is below 4GB, so the DeviceAddress is simply the HostAddress
- //
- *DeviceAddress = PhysicalAddress;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Completes the Map() operation and releases any corresponding resources.
-
- The Unmap() function completes the Map() operation and releases any corresponding resources.
- If the operation was an EfiPciOperationBusMasterWrite or
- EfiPciOperationBusMasterWrite64, the data is committed to the target system memory.
- Any resources used for the mapping are freed.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Mapping The mapping value returned from Map().
-
- @retval EFI_SUCCESS The range was unmapped.
- @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
- @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoUnmap (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN VOID *Mapping
- )
-{
- MAP_INFO *MapInfo;
-
- //
- // See if the Map() operation associated with this Unmap() required a mapping buffer.
- // If a mapping buffer was not required, then this function simply returns EFI_SUCCESS.
- //
- if (Mapping != NULL) {
- //
- // Get the MAP_INFO structure from Mapping
- //
- MapInfo = (MAP_INFO *)Mapping;
-
- //
- // If this is a write operation from the Bus Master's point of view,
- // then copy the contents of the mapped buffer into the real buffer
- // so the processor can read the contents of the real buffer.
- //
- if (MapInfo->Operation == EfiPciOperationBusMasterWrite || MapInfo->Operation == EfiPciOperationBusMasterWrite64) {
- CopyMem (
- (VOID *)(UINTN)MapInfo->HostAddress,
- (VOID *)(UINTN)MapInfo->MappedHostAddress,
- MapInfo->NumberOfBytes
- );
- }
-
- //
- // Free the mapped buffer and the MAP_INFO structure.
- //
- gBS->FreePages (MapInfo->MappedHostAddress, MapInfo->NumberOfPages);
- gBS->FreePool (Mapping);
- }
- return EFI_SUCCESS;
-}
-
-/**
- Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or
- EfiPciOperationBusMasterCommonBuffer64 mapping.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Type This parameter is not used and must be ignored.
- @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData.
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the allocated range.
- @param Attributes The requested bit mask of attributes for the allocated range. Only
- the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED,
- and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function.
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_INVALID_PARAMETER MemoryType is invalid.
- @retval EFI_INVALID_PARAMETER HostAddress is NULL.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoAllocateBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN EFI_ALLOCATE_TYPE Type,
- IN EFI_MEMORY_TYPE MemoryType,
- IN UINTN Pages,
- OUT VOID **HostAddress,
- IN UINT64 Attributes
- )
-{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS PhysicalAddress;
-
- //
- // Validate Attributes
- //
- if ((Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) != 0) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Check for invalid inputs
- //
- if (HostAddress == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // The only valid memory types are EfiBootServicesData and EfiRuntimeServicesData
- //
- if (MemoryType != EfiBootServicesData && MemoryType != EfiRuntimeServicesData) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Limit allocations to memory below 4GB
- //
- PhysicalAddress = (EFI_PHYSICAL_ADDRESS)(0xffffffff);
-
- Status = gBS->AllocatePages (AllocateMaxAddress, MemoryType, Pages, &PhysicalAddress);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- *HostAddress = (VOID *)(UINTN)PhysicalAddress;
-
- return EFI_SUCCESS;
-}
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- The FreeBuffer() function frees memory that was allocated with AllocateBuffer().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
-
- @retval EFI_SUCCESS The requested memory pages were freed.
- @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
- was not allocated with AllocateBuffer().
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFreeBuffer (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINTN Pages,
- OUT VOID *HostAddress
- )
-{
- return gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress, Pages);
-}
-
-/**
- Flushes all PCI posted write transactions from a PCI host bridge to system memory.
-
- The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system
- memory. Posted write transactions are generated by PCI bus masters when they perform write
- transactions to target addresses in system memory.
- This function does not flush posted write transactions from any PCI bridges. A PCI controller
- specific action must be taken to guarantee that the posted write transactions have been flushed from
- the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with
- a PCI read transaction from the PCI controller prior to calling Flush().
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
-
- @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host
- bridge to system memory.
- @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI
- host bridge due to a hardware error.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoFlush (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This
- )
-{
- //
- // not supported yet
- //
- return EFI_SUCCESS;
-}
-
-/**
- Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the
- attributes that a PCI root bridge is currently using.
-
- The GetAttributes() function returns the mask of attributes that this PCI root bridge supports
- and the mask of attributes that the PCI root bridge is currently using.
-
- @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param Supported A pointer to the mask of attributes that this PCI root bridge
- supports setting with SetAttributes().
- @param Attributes A pointer to the mask of attributes that this PCI root bridge is
- currently using.
-
- @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root
- bridge supports is returned in Supports. If Attributes is
- not NULL, then the attributes that the PCI root bridge is currently
- using is returned in Attributes.
- @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoGetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT UINT64 *Supported,
- OUT UINT64 *Attributes
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Attributes == NULL && Supported == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Set the return value for Supported and Attributes
- //
- if (Supported != NULL) {
- *Supported = PrivateData->Supports;
- }
-
- if (Attributes != NULL) {
- *Attributes = PrivateData->Attributes;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Sets attributes for a resource range on a PCI root bridge.
-
- The SetAttributes() function sets the attributes specified in Attributes for the PCI root
- bridge on the resource range specified by ResourceBase and ResourceLength. Since the
- granularity of setting these attributes may vary from resource type to resource type, and from
- platform to platform, the actual resource range and the one passed in by the caller may differ. As a
- result, this function may set the attributes specified by Attributes on a larger resource range
- than the caller requested. The actual range is returned in ResourceBase and
- ResourceLength. The caller is responsible for verifying that the actual range for which the
- attributes were set is acceptable.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[in] Attributes The mask of attributes to set. If the attribute bit
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, or
- MEMORY_DISABLE is set, then the resource range is specified by
- ResourceBase and ResourceLength. If
- MEMORY_WRITE_COMBINE, MEMORY_CACHED, and
- MEMORY_DISABLE are not set, then ResourceBase and
- ResourceLength are ignored, and may be NULL.
- @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified
- by the attributes specified by Attributes.
- @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the
- attributes specified by Attributes.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoSetAttributes (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- IN UINT64 Attributes,
- IN OUT UINT64 *ResourceBase,
- IN OUT UINT64 *ResourceLength
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This);
-
- if (Attributes != 0) {
- if ((Attributes & (~(PrivateData->Supports))) != 0) {
- return EFI_UNSUPPORTED;
- }
- }
-
- //
- // This is a generic driver for a PC-AT class system. It does not have any
- // chipset specific knowlegde, so none of the attributes can be set or
- // cleared. Any attempt to set attribute that are already set will succeed,
- // and any attempt to set an attribute that is not supported will fail.
- //
- if (Attributes & (~PrivateData->Attributes)) {
- return EFI_UNSUPPORTED;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0
- resource descriptors.
-
- There are only two resource descriptor types from the ACPI Specification that may be used to
- describe the current resources allocated to a PCI root bridge. These are the QWORD Address
- Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The
- QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic
- or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD
- Address Space Descriptors followed by an End Tag.
-
- @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.
- @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the
- current configuration of this PCI root bridge. The storage for the
- ACPI 2.0 resource descriptors is allocated by this function. The
- caller must treat the return buffer as read-only data, and the buffer
- must not be freed by the caller.
-
- @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources.
- @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved.
- @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL
-
-**/
-EFI_STATUS
-EFIAPI
-RootBridgeIoConfiguration (
- IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This,
- OUT VOID **Resources
- )
-{
- PCI_ROOT_BRIDGE_INSTANCE *PrivateData;
- UINTN Index;
-
- PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This);
-
- for (Index = 0; Index < TypeMax; Index++) {
- if (PrivateData->ResAllocNode[Index].Status == ResAllocated) {
- Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base;
- Configuration.SpaceDesp[Index].AddrRangeMax = PrivateData->ResAllocNode[Index].Base + PrivateData->ResAllocNode[Index].Length - 1;
- Configuration.SpaceDesp[Index].AddrLen = PrivateData->ResAllocNode[Index].Length;
- }
- }
-
- *Resources = &Configuration;
- return EFI_SUCCESS;
-}
-