| Message ID | 20231206221556.15348-4-paul@crapouillou.net |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: samsung: exynos4210-i9100 updates | expand |
On 06/12/2023 23:15, Paul Cercueil wrote: > Add a Device Tree node for the ST Microelectronics "K3D" accelerometer > chip found in the Galaxy S2. > > Signed-off-by: Paul Cercueil <paul@crapouillou.net> > --- > arch/arm/boot/dts/samsung/exynos4210-i9100.dts | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts > index f03b03dbe9f2..7e57fe033e2b 100644 > --- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts > +++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts > @@ -421,6 +421,23 @@ touchscreen@4a { > }; > }; > > +&i2c_1 { Fixed placement, so nodes are ordered. If it was not the case in your DTS, it means you worked on some old tree, which should be avoided. Please work on mainline. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts index f03b03dbe9f2..7e57fe033e2b 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts @@ -421,6 +421,23 @@ touchscreen@4a { }; }; +&i2c_1 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + lis3dh: accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; + &i2c_5 { status = "okay";
Add a Device Tree node for the ST Microelectronics "K3D" accelerometer chip found in the Galaxy S2. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/arm/boot/dts/samsung/exynos4210-i9100.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)