new file mode 100644
@@ -0,0 +1,189 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Introduction of mseal
+=====================
+
+:Author: Jeff Xu <jeffxu@chromium.org>
+
+Modern CPUs support memory permissions such as RW and NX bits. The memory
+permission feature improves security stance on memory corruption bugs, i.e.
+the attacker can’t just write to arbitrary memory and point the code to it,
+the memory has to be marked with X bit, or else an exception will happen.
+
+Memory sealing additionally protects the mapping itself against
+modifications. This is useful to mitigate memory corruption issues where a
+corrupted pointer is passed to a memory management system. For example,
+such an attacker primitive can break control-flow integrity guarantees
+since read-only memory that is supposed to be trusted can become writable
+or .text pages can get remapped. Memory sealing can automatically be
+applied by the runtime loader to seal .text and .rodata pages and
+applications can additionally seal security critical data at runtime.
+
+A similar feature already exists in the XNU kernel with the
+VM_FLAGS_PERMANENT flag [1] and on OpenBSD with the mimmutable syscall [2].
+
+User API
+========
+Two system calls are involved in virtual memory sealing, ``mseal()`` and ``mmap()``.
+
+``mseal()``
+-----------
+
+The ``mseal()`` is an architecture independent syscall, and with following
+signature:
+
+``int mseal(void addr, size_t len, unsigned long types, unsigned long flags)``
+
+**addr/len**: virtual memory address range.
+
+The address range set by ``addr``/``len`` must meet:
+ - start (addr) must be in a valid VMA.
+ - end (addr + len) must be in a valid VMA.
+ - no gap (unallocated memory) between start and end.
+ - start (addr) must be page aligned.
+
+The ``len`` will be paged aligned implicitly by kernel.
+
+**types**: bit mask to specify the sealing types, they are:
+
+- The ``MM_SEAL_BASE``: Prevent VMA from:
+
+ Unmapping, moving to another location, and shrinking the size,
+ via munmap() and mremap(), can leave an empty space, therefore
+ can be replaced with a VMA with a new set of attributes.
+
+ Move or expand a different vma into the current location,
+ via mremap().
+
+ Modifying sealed VMA via mmap(MAP_FIXED).
+
+ Size expansion, via mremap(), does not appear to pose any
+ specific risks to sealed VMAs. It is included anyway because
+ the use case is unclear. In any case, users can rely on
+ merging to expand a sealed VMA.
+
+ We consider the MM_SEAL_BASE feature, on which other sealing
+ features will depend. For instance, it probably does not make sense
+ to seal PROT_PKEY without sealing the BASE, and the kernel will
+ implicitly add SEAL_BASE for SEAL_PROT_PKEY. (If the application
+ wants to relax this in future, we could use the “flags” field in
+ mseal() to overwrite this the behavior.)
+
+- The ``MM_SEAL_PROT_PKEY``:
+
+ Seal PROT and PKEY of the address range, in other words,
+ mprotect() and pkey_mprotect() will be denied if the memory is
+ sealed with MM_SEAL_PROT_PKEY.
+
+- The ``MM_SEAL_DISCARD_RO_ANON``:
+
+ Certain types of madvise() operations are destructive [3], such
+ as MADV_DONTNEED, which can effectively alter region contents by
+ discarding pages, especially when memory is anonymous. This blocks
+ such operations for anonymous memory which is not writable to the
+ user.
+
+- The ``MM_SEAL_SEAL``
+ Denies adding a new seal.
+
+**flags**: reserved for future use.
+
+**return values**:
+
+- ``0``:
+ - Success.
+
+- ``-EINVAL``:
+ - Invalid seal type.
+ - Invalid input flags.
+ - Start address is not page aligned.
+ - Address range (``addr`` + ``len``) overflow.
+
+- ``-ENOMEM``:
+ - ``addr`` is not a valid address (not allocated).
+ - End address (``addr`` + ``len``) is not a valid address.
+ - A gap (unallocated memory) between start and end.
+
+- ``-EACCES``:
+ - ``MM_SEAL_SEAL`` is set, adding a new seal is not allowed.
+ - Address range is not sealable, e.g. ``MAP_SEALABLE`` is not
+ set during ``mmap()``.
+
+**Note**:
+
+- User can call mseal(2) multiple times to add new seal types.
+- Adding an already added seal type is a no-action (no error).
+- unseal() or removing a seal type is not supported.
+- In case of error return, one can expect the memory range is unchanged.
+
+``mmap()``
+----------
+``void *mmap(void* addr, size_t length, int prot, int flags, int fd,
+off_t offset);``
+
+We made two changes (``prot`` and ``flags``) to ``mmap()`` related to
+memory sealing.
+
+**prot**:
+
+- ``PROT_SEAL_SEAL``
+- ``PROT_SEAL_BASE``
+- ``PROT_SEAL_PROT_PKEY``
+- ``PROT_SEAL_DISCARD_RO_ANON``
+
+Allow ``mmap()`` to set the sealing type when creating a mapping. This is
+useful for optimization because it avoids having to make two system
+calls: one for ``mmap()`` and one for ``mseal()``.
+
+It's worth noting that even though the sealing type is set via the
+``prot`` field in ``mmap()``, we don't require it to be set in the ``prot``
+field in later ``mprotect()`` call. This is unlike the ``PROT_READ``,
+``PROT_WRITE``, ``PROT_EXEC`` bits, e.g. if ``PROT_WRITE`` is not set in
+``mprotect()``, it means that the region is not writable.
+
+**flags**
+The ``MAP_SEALABLE`` flag is added to the ``flags`` field of ``mmap()``.
+When present, it marks the map as sealable. A map created
+without ``MAP_SEALABLE`` will not support sealing; In other words,
+``mseal()`` will fail for such a map.
+
+Applications that don't care about sealing will expect their
+behavior unchanged. For those that need sealing support, opt-in
+by adding ``MAP_SEALABLE`` when creating the map.
+
+Use Case:
+=========
+- glibc:
+ The dymamic linker, during loading ELF executables, can apply sealing to
+ to non-writeable memory segments.
+
+- Chrome browser: protect some security sensitive data-structures.
+
+Additional notes:
+=================
+As Jann Horn pointed out in [3], there are still a few ways to write
+to RO memory, which is, in a way, by design. Those are not covered by
+``mseal()``. If applications want to block such cases, sandboxer
+(such as seccomp, LSM, etc) might be considered.
+
+Those cases are:
+
+- Write to read-only memory through ``/proc/self/mem`` interface.
+
+- Write to read-only memory through ``ptrace`` (such as ``PTRACE_POKETEXT``).
+
+- ``userfaultfd()``.
+
+The idea that inspired this patch comes from Stephen Röttger’s work in V8
+CFI [4].Chrome browser in ChromeOS will be the first user of this API.
+
+Reference:
+==========
+[1] https://github.com/apple-oss-distributions/xnu/blob/1031c584a5e37aff177559b9f69dbd3c8c3fd30a/osfmk/mach/vm_statistics.h#L274
+
+[2] https://man.openbsd.org/mimmutable.2
+
+[3] https://lore.kernel.org/lkml/CAG48ez3ShUYey+ZAFsU2i1RpQn0a5eOs2hzQ426FkcgnfUGLvA@mail.gmail.com
+
+[4] https://docs.google.com/document/d/1O2jwK4dxI3nRcOJuPYkonhTkNQfbmwdvxQMyXgeaRHo/edit#heading=h.bvaojj9fu6hc