[10/15] hisi_sas: fix HBA SAS addr endianness for v2 hw

Message ID 1473176185-217808-11-git-send-email-john.garry@huawei.com
State New
Headers show

Commit Message

John Garry Sept. 6, 2016, 3:36 p.m.
The endianness for the SAS address in the TX_ID_DWORD
registers is set incorrectly.
We see errors like this in the boot log:
[    7.583284] sas: target proto 0x0 at 50000d1108e7923f:0x1f not handled

This is due to the host SAS addr not matching the PHY SAS
addr in the expander host-attached phy discovery responses.

To fix, we byte swap the SAS addr from BE to LE (which is
the endianness of the SAS controller).

Signed-off-by: John Garry <john.garry@huawei.com>

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>

---
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch hide | download patch | download mbox

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index ae44443..ce84211 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -562,13 +562,13 @@  static void config_id_frame_v2_hw(struct hisi_hba *hisi_hba, int phy_no)
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
 			__swab32(identify_buffer[0]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
-			identify_buffer[2]);
+			__swab32(identify_buffer[1]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
-			identify_buffer[1]);
+			__swab32(identify_buffer[2]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
-			identify_buffer[4]);
+			__swab32(identify_buffer[3]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
-			identify_buffer[3]);
+			__swab32(identify_buffer[4]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
 			__swab32(identify_buffer[5]));
 }