diff mbox series

[v2,02/16] serial: sc16is7xx: add check for unsupported SPI modes during probe

Message ID 20231221231823.2327894-3-hugo@hugovil.com
State New
Headers show
Series serial: sc16is7xx: fixes, cleanups and improvements | expand

Commit Message

Hugo Villeneuve Dec. 21, 2023, 11:18 p.m. UTC 
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

The original comment is confusing because it implies that variants other
than the SC16IS762 supports other SPI modes beside SPI_MODE_0.

Extract from datasheet:
    The SC16IS762 differs from the SC16IS752 in that it supports SPI clock
    speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the
    SC16IS752... In all other aspects, the SC16IS762 is functionally and
    electrically the same as the SC16IS752.

The same is also true of the SC16IS760 variant versus the SC16IS740 and
SC16IS750 variants.

For all variants, only SPI mode 0 is supported.

Change comment and abort probing if the specified SPI mode is not
SPI_MODE_0.

Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/tty/serial/sc16is7xx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 17b90f971f96..798fa115b28a 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1733,7 +1733,10 @@  static int sc16is7xx_spi_probe(struct spi_device *spi)
 
 	/* Setup SPI bus */
 	spi->bits_per_word	= 8;
-	/* only supports mode 0 on SC16IS762 */
+	/* For all variants, only mode 0 is supported */
+	if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
+		return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n");
+
 	spi->mode		= spi->mode ? : SPI_MODE_0;
 	spi->max_speed_hz	= spi->max_speed_hz ? : 15000000;
 	ret = spi_setup(spi);