| Message ID | 20240103095704.135651-5-arend.vanspriel@broadcom.com |
|---|---|
| State | New |
| Headers | show |
| Series | wifi: brcmfmac: per-vendor changes and SAE offload support | expand |
On Wed, Jan 3, 2024 at 4:57 AM Arend van Spriel <arend.vanspriel@broadcom.com> wrote: > > From: Hector Martin <marcan@marcan.st> > > Using the WSEC command instead of sae_password seems to be the supported > mechanism on newer firmware, and also how the brcmdhd driver does it. > > According to user reports [1], the sae_password codepath doesn't actually > work on machines with Cypress chips anyway, so no harm in removing it. > > This makes WPA3 work with iwd, or with wpa_supplicant pending a support > patchset [2]. > > [1] https://rachelbythebay.com/w/2023/11/06/wpa3/ > [2] http://lists.infradead.org/pipermail/hostap/2023-July/041653.html > > Signed-off-by: Hector Martin <marcan@marcan.st> > Reviewed-by: Neal Gompa <neal@gompa.dev> > [arend.vanspriel@broadcom.com: use multi-vendor framework] > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> > --- > .../broadcom/brcm80211/brcmfmac/cfg80211.c | 56 ++++++++----------- > .../broadcom/brcm80211/brcmfmac/cfg80211.h | 2 + > .../broadcom/brcm80211/brcmfmac/cyw/core.c | 28 ++++++++++ > .../broadcom/brcm80211/brcmfmac/fwil.c | 1 + > .../broadcom/brcm80211/brcmfmac/fwil_types.h | 2 +- > .../broadcom/brcm80211/brcmfmac/fwvid.h | 13 +++++ > .../broadcom/brcm80211/brcmfmac/wcc/core.c | 9 +++ > 7 files changed, 76 insertions(+), 35 deletions(-) > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c > index 4df3d53bf5d3..03e5d4f986ca 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c > @@ -32,6 +32,7 @@ > #include "vendor.h" > #include "bus.h" > #include "common.h" > +#include "fwvid.h" > > #define BRCMF_SCAN_IE_LEN_MAX 2048 > > @@ -1687,52 +1688,39 @@ static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e) > return reason; > } > > -static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) > +int brcmf_set_wsec(struct brcmf_if *ifp, const u8 *key, u16 key_len, u16 flags) > { > struct brcmf_pub *drvr = ifp->drvr; > struct brcmf_wsec_pmk_le pmk; > int err; > > + if (key_len > sizeof(pmk.key)) { > + bphy_err(drvr, "key must be less than %zu bytes\n", > + sizeof(pmk.key)); > + return -EINVAL; > + } > + > memset(&pmk, 0, sizeof(pmk)); > > - /* pass pmk directly */ > - pmk.key_len = cpu_to_le16(pmk_len); > - pmk.flags = cpu_to_le16(0); > - memcpy(pmk.key, pmk_data, pmk_len); > + /* pass key material directly */ > + pmk.key_len = cpu_to_le16(key_len); > + pmk.flags = cpu_to_le16(flags); > + memcpy(pmk.key, key, key_len); > > - /* store psk in firmware */ > + /* store key material in firmware */ > err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK, > &pmk, sizeof(pmk)); > if (err < 0) > bphy_err(drvr, "failed to change PSK in firmware (len=%u)\n", > - pmk_len); > + key_len); > > return err; > } > +BRCMF_EXPORT_SYMBOL_GPL(brcmf_set_wsec); > > -static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data, > - u16 pwd_len) > +static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) > { > - struct brcmf_pub *drvr = ifp->drvr; > - struct brcmf_wsec_sae_pwd_le sae_pwd; > - int err; > - > - if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) { > - bphy_err(drvr, "sae_password must be less than %d\n", > - BRCMF_WSEC_MAX_SAE_PASSWORD_LEN); > - return -EINVAL; > - } > - > - sae_pwd.key_len = cpu_to_le16(pwd_len); > - memcpy(sae_pwd.key, pwd_data, pwd_len); > - > - err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd, > - sizeof(sae_pwd)); > - if (err < 0) > - bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n", > - pwd_len); > - > - return err; > + return brcmf_set_wsec(ifp, pmk_data, pmk_len, 0); > } > > static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason, > @@ -2503,8 +2491,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, > bphy_err(drvr, "failed to clean up user-space RSNE\n"); > goto done; > } > - err = brcmf_set_sae_password(ifp, sme->crypto.sae_pwd, > - sme->crypto.sae_pwd_len); > + err = brcmf_fwvid_set_sae_password(ifp, &sme->crypto); > if (!err && sme->crypto.psk) > err = brcmf_set_pmk(ifp, sme->crypto.psk, > BRCMF_WSEC_MAX_PSK_LEN); > @@ -5252,8 +5239,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, > if (crypto->sae_pwd) { > brcmf_dbg(INFO, "using SAE offload\n"); > profile->use_fwauth |= BIT(BRCMF_PROFILE_FWAUTH_SAE); > - err = brcmf_set_sae_password(ifp, crypto->sae_pwd, > - crypto->sae_pwd_len); > + err = brcmf_fwvid_set_sae_password(ifp, crypto); > if (err < 0) > goto exit; > } > @@ -5360,10 +5346,12 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, > msleep(400); > > if (profile->use_fwauth != BIT(BRCMF_PROFILE_FWAUTH_NONE)) { > + struct cfg80211_crypto_settings crypto = {}; > + > if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_PSK)) > brcmf_set_pmk(ifp, NULL, 0); > if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_SAE)) > - brcmf_set_sae_password(ifp, NULL, 0); > + brcmf_fwvid_set_sae_password(ifp, &crypto); > profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE); > } > > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h > index 0e1fa3f0dea2..dc3a6a537507 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h > @@ -468,4 +468,6 @@ void brcmf_set_mpc(struct brcmf_if *ndev, int mpc); > void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg); > void brcmf_cfg80211_free_netdev(struct net_device *ndev); > > +int brcmf_set_wsec(struct brcmf_if *ifp, const u8 *key, u16 key_len, u16 flags); > + > #endif /* BRCMFMAC_CFG80211_H */ > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c > index b75652ba9359..24670497f1a4 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c > @@ -7,6 +7,7 @@ > #include <core.h> > #include <bus.h> > #include <fwvid.h> > +#include <fwil.h> > > #include "vops.h" > > @@ -21,7 +22,34 @@ static void brcmf_cyw_detach(struct brcmf_pub *drvr) > pr_err("%s: executing\n", __func__); > } > > +static int brcmf_cyw_set_sae_pwd(struct brcmf_if *ifp, > + struct cfg80211_crypto_settings *crypto) > +{ > + struct brcmf_pub *drvr = ifp->drvr; > + struct brcmf_wsec_sae_pwd_le sae_pwd; > + u16 pwd_len = crypto->sae_pwd_len; > + int err; > + > + if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) { > + bphy_err(drvr, "sae_password must be less than %d\n", > + BRCMF_WSEC_MAX_SAE_PASSWORD_LEN); > + return -EINVAL; > + } > + > + sae_pwd.key_len = cpu_to_le16(pwd_len); > + memcpy(sae_pwd.key, crypto->sae_pwd, pwd_len); > + > + err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd, > + sizeof(sae_pwd)); > + if (err < 0) > + bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n", > + pwd_len); > + > + return err; > +} > + > const struct brcmf_fwvid_ops brcmf_cyw_ops = { > .attach = brcmf_cyw_attach, > .detach = brcmf_cyw_detach, > + .set_sae_password = brcmf_cyw_set_sae_pwd, > }; > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c > index 2aec7d2abd52..bc1c6b5a6e31 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c > @@ -211,6 +211,7 @@ brcmf_fil_iovar_data_set(struct brcmf_if *ifp, const char *name, const void *dat > mutex_unlock(&drvr->proto_block); > return err; > } > +BRCMF_EXPORT_SYMBOL_GPL(brcmf_fil_iovar_data_set); > > s32 > brcmf_fil_iovar_data_get(struct brcmf_if *ifp, const char *name, void *data, > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h > index 9d248ba1c0b2..e74a23e11830 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h > @@ -584,7 +584,7 @@ struct brcmf_wsec_key_le { > struct brcmf_wsec_pmk_le { > __le16 key_len; > __le16 flags; > - u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1]; > + u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN]; > }; > > /** > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h > index 17fbdbb76f51..d9fc76b46db9 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h > @@ -6,6 +6,7 @@ > #define FWVID_H_ > > #include "firmware.h" > +#include "cfg80211.h" > > struct brcmf_pub; > struct brcmf_if; > @@ -14,6 +15,7 @@ struct brcmf_fwvid_ops { > int (*attach)(struct brcmf_pub *drvr); > void (*detach)(struct brcmf_pub *drvr); > void (*feat_attach)(struct brcmf_if *ifp); > + int (*set_sae_password)(struct brcmf_if *ifp, struct cfg80211_crypto_settings *crypto); > }; > > /* exported functions */ > @@ -56,4 +58,15 @@ static inline void brcmf_fwvid_feat_attach(struct brcmf_if *ifp) > vops->feat_attach(ifp); > } > > +static inline int brcmf_fwvid_set_sae_password(struct brcmf_if *ifp, > + struct cfg80211_crypto_settings *crypto) > +{ > + const struct brcmf_fwvid_ops *vops = ifp->drvr->vops; > + > + if (!vops || !vops->set_sae_password) > + return -EOPNOTSUPP; > + > + return vops->set_sae_password(ifp, crypto); > +} > + > #endif /* FWVID_H_ */ > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c > index 5573a47766ad..2d8f80bd7382 100644 > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c > @@ -7,6 +7,7 @@ > #include <core.h> > #include <bus.h> > #include <fwvid.h> > +#include <fwil.h> > > #include "vops.h" > > @@ -21,7 +22,15 @@ static void brcmf_wcc_detach(struct brcmf_pub *drvr) > pr_debug("%s: executing\n", __func__); > } > > +static int brcmf_wcc_set_sae_pwd(struct brcmf_if *ifp, > + struct cfg80211_crypto_settings *crypto) > +{ > + return brcmf_set_wsec(ifp, crypto->sae_pwd, crypto->sae_pwd_len, > + BRCMF_WSEC_PASSPHRASE); > +} > + > const struct brcmf_fwvid_ops brcmf_wcc_ops = { > .attach = brcmf_wcc_attach, > .detach = brcmf_wcc_detach, > + .set_sae_password = brcmf_wcc_set_sae_pwd, > }; > -- > 2.32.0 > Though my R-b tag is there already from the previous version, this patch still looks good to me to land. Thanks for adapting it for the multi-vendor framework. :) -- 真実はいつも一つ！/ Always, there's only one truth!
Arend van Spriel <arend.vanspriel@broadcom.com> wrote: > From: Hector Martin <marcan@marcan.st> > > Using the WSEC command instead of sae_password seems to be the supported > mechanism on newer firmware, and also how the brcmdhd driver does it. > > According to user reports [1], the sae_password codepath doesn't actually > work on machines with Cypress chips anyway, so no harm in removing it. > > This makes WPA3 work with iwd, or with wpa_supplicant pending a support > patchset [2]. > > [1] https://rachelbythebay.com/w/2023/11/06/wpa3/ > [2] http://lists.infradead.org/pipermail/hostap/2023-July/041653.html > > Signed-off-by: Hector Martin <marcan@marcan.st> > Reviewed-by: Neal Gompa <neal@gompa.dev> > [arend.vanspriel@broadcom.com: use multi-vendor framework] > Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Should we also update the commit message to match the code? We are not removing the Cypress codepath anymore, right? I can do the update, just let me know what to add. Preferably something I can just copy&paste.
On 1/18/2024 2:14 PM, Kalle Valo wrote: > Arend van Spriel <arend.vanspriel@broadcom.com> wrote: > >> From: Hector Martin <marcan@marcan.st> >> >> Using the WSEC command instead of sae_password seems to be the supported >> mechanism on newer firmware, and also how the brcmdhd driver does it. >> >> According to user reports [1], the sae_password codepath doesn't actually >> work on machines with Cypress chips anyway, so no harm in removing it. Replace above paragraph with: The existing firmware mechanism intended for (some) Cypress chips has been separated from the new firmware mechanism using the multi-vendor framework. Depending on the device it will select the appropriate firmware mechanism. Regards, Arend >> This makes WPA3 work with iwd, or with wpa_supplicant pending a support >> patchset [2]. >> >> [1] https://rachelbythebay.com/w/2023/11/06/wpa3/ >> [2] http://lists.infradead.org/pipermail/hostap/2023-July/041653.html >> >> Signed-off-by: Hector Martin <marcan@marcan.st> >> Reviewed-by: Neal Gompa <neal@gompa.dev> >> [arend.vanspriel@broadcom.com: use multi-vendor framework] >> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> > > Should we also update the commit message to match the code? We are not removing > the Cypress codepath anymore, right? > > I can do the update, just let me know what to add. Preferably something I can > just copy&paste. >
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 4df3d53bf5d3..03e5d4f986ca 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -32,6 +32,7 @@ #include "vendor.h" #include "bus.h" #include "common.h" +#include "fwvid.h" #define BRCMF_SCAN_IE_LEN_MAX 2048 @@ -1687,52 +1688,39 @@ static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e) return reason; } -static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) +int brcmf_set_wsec(struct brcmf_if *ifp, const u8 *key, u16 key_len, u16 flags) { struct brcmf_pub *drvr = ifp->drvr; struct brcmf_wsec_pmk_le pmk; int err; + if (key_len > sizeof(pmk.key)) { + bphy_err(drvr, "key must be less than %zu bytes\n", + sizeof(pmk.key)); + return -EINVAL; + } + memset(&pmk, 0, sizeof(pmk)); - /* pass pmk directly */ - pmk.key_len = cpu_to_le16(pmk_len); - pmk.flags = cpu_to_le16(0); - memcpy(pmk.key, pmk_data, pmk_len); + /* pass key material directly */ + pmk.key_len = cpu_to_le16(key_len); + pmk.flags = cpu_to_le16(flags); + memcpy(pmk.key, key, key_len); - /* store psk in firmware */ + /* store key material in firmware */ err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK, &pmk, sizeof(pmk)); if (err < 0) bphy_err(drvr, "failed to change PSK in firmware (len=%u)\n", - pmk_len); + key_len); return err; } +BRCMF_EXPORT_SYMBOL_GPL(brcmf_set_wsec); -static int brcmf_set_sae_password(struct brcmf_if *ifp, const u8 *pwd_data, - u16 pwd_len) +static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) { - struct brcmf_pub *drvr = ifp->drvr; - struct brcmf_wsec_sae_pwd_le sae_pwd; - int err; - - if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) { - bphy_err(drvr, "sae_password must be less than %d\n", - BRCMF_WSEC_MAX_SAE_PASSWORD_LEN); - return -EINVAL; - } - - sae_pwd.key_len = cpu_to_le16(pwd_len); - memcpy(sae_pwd.key, pwd_data, pwd_len); - - err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd, - sizeof(sae_pwd)); - if (err < 0) - bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n", - pwd_len); - - return err; + return brcmf_set_wsec(ifp, pmk_data, pmk_len, 0); } static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason, @@ -2503,8 +2491,7 @@ brcmf_cfg80211_connect(struct wiphy *wiphy, struct net_device *ndev, bphy_err(drvr, "failed to clean up user-space RSNE\n"); goto done; } - err = brcmf_set_sae_password(ifp, sme->crypto.sae_pwd, - sme->crypto.sae_pwd_len); + err = brcmf_fwvid_set_sae_password(ifp, &sme->crypto); if (!err && sme->crypto.psk) err = brcmf_set_pmk(ifp, sme->crypto.psk, BRCMF_WSEC_MAX_PSK_LEN); @@ -5252,8 +5239,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, if (crypto->sae_pwd) { brcmf_dbg(INFO, "using SAE offload\n"); profile->use_fwauth |= BIT(BRCMF_PROFILE_FWAUTH_SAE); - err = brcmf_set_sae_password(ifp, crypto->sae_pwd, - crypto->sae_pwd_len); + err = brcmf_fwvid_set_sae_password(ifp, crypto); if (err < 0) goto exit; } @@ -5360,10 +5346,12 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, msleep(400); if (profile->use_fwauth != BIT(BRCMF_PROFILE_FWAUTH_NONE)) { + struct cfg80211_crypto_settings crypto = {}; + if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_PSK)) brcmf_set_pmk(ifp, NULL, 0); if (profile->use_fwauth & BIT(BRCMF_PROFILE_FWAUTH_SAE)) - brcmf_set_sae_password(ifp, NULL, 0); + brcmf_fwvid_set_sae_password(ifp, &crypto); profile->use_fwauth = BIT(BRCMF_PROFILE_FWAUTH_NONE); } diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h index 0e1fa3f0dea2..dc3a6a537507 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h @@ -468,4 +468,6 @@ void brcmf_set_mpc(struct brcmf_if *ndev, int mpc); void brcmf_abort_scanning(struct brcmf_cfg80211_info *cfg); void brcmf_cfg80211_free_netdev(struct net_device *ndev); +int brcmf_set_wsec(struct brcmf_if *ifp, const u8 *key, u16 key_len, u16 flags); + #endif /* BRCMFMAC_CFG80211_H */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c index b75652ba9359..24670497f1a4 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c @@ -7,6 +7,7 @@ #include <core.h> #include <bus.h> #include <fwvid.h> +#include <fwil.h> #include "vops.h" @@ -21,7 +22,34 @@ static void brcmf_cyw_detach(struct brcmf_pub *drvr) pr_err("%s: executing\n", __func__); } +static int brcmf_cyw_set_sae_pwd(struct brcmf_if *ifp, + struct cfg80211_crypto_settings *crypto) +{ + struct brcmf_pub *drvr = ifp->drvr; + struct brcmf_wsec_sae_pwd_le sae_pwd; + u16 pwd_len = crypto->sae_pwd_len; + int err; + + if (pwd_len > BRCMF_WSEC_MAX_SAE_PASSWORD_LEN) { + bphy_err(drvr, "sae_password must be less than %d\n", + BRCMF_WSEC_MAX_SAE_PASSWORD_LEN); + return -EINVAL; + } + + sae_pwd.key_len = cpu_to_le16(pwd_len); + memcpy(sae_pwd.key, crypto->sae_pwd, pwd_len); + + err = brcmf_fil_iovar_data_set(ifp, "sae_password", &sae_pwd, + sizeof(sae_pwd)); + if (err < 0) + bphy_err(drvr, "failed to set SAE password in firmware (len=%u)\n", + pwd_len); + + return err; +} + const struct brcmf_fwvid_ops brcmf_cyw_ops = { .attach = brcmf_cyw_attach, .detach = brcmf_cyw_detach, + .set_sae_password = brcmf_cyw_set_sae_pwd, }; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c index 2aec7d2abd52..bc1c6b5a6e31 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil.c @@ -211,6 +211,7 @@ brcmf_fil_iovar_data_set(struct brcmf_if *ifp, const char *name, const void *dat mutex_unlock(&drvr->proto_block); return err; } +BRCMF_EXPORT_SYMBOL_GPL(brcmf_fil_iovar_data_set); s32 brcmf_fil_iovar_data_get(struct brcmf_if *ifp, const char *name, void *data, diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h index 9d248ba1c0b2..e74a23e11830 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h @@ -584,7 +584,7 @@ struct brcmf_wsec_key_le { struct brcmf_wsec_pmk_le { __le16 key_len; __le16 flags; - u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1]; + u8 key[BRCMF_WSEC_MAX_SAE_PASSWORD_LEN]; }; /** diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h index 17fbdbb76f51..d9fc76b46db9 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwvid.h @@ -6,6 +6,7 @@ #define FWVID_H_ #include "firmware.h" +#include "cfg80211.h" struct brcmf_pub; struct brcmf_if; @@ -14,6 +15,7 @@ struct brcmf_fwvid_ops { int (*attach)(struct brcmf_pub *drvr); void (*detach)(struct brcmf_pub *drvr); void (*feat_attach)(struct brcmf_if *ifp); + int (*set_sae_password)(struct brcmf_if *ifp, struct cfg80211_crypto_settings *crypto); }; /* exported functions */ @@ -56,4 +58,15 @@ static inline void brcmf_fwvid_feat_attach(struct brcmf_if *ifp) vops->feat_attach(ifp); } +static inline int brcmf_fwvid_set_sae_password(struct brcmf_if *ifp, + struct cfg80211_crypto_settings *crypto) +{ + const struct brcmf_fwvid_ops *vops = ifp->drvr->vops; + + if (!vops || !vops->set_sae_password) + return -EOPNOTSUPP; + + return vops->set_sae_password(ifp, crypto); +} + #endif /* FWVID_H_ */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c index 5573a47766ad..2d8f80bd7382 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/core.c @@ -7,6 +7,7 @@ #include <core.h> #include <bus.h> #include <fwvid.h> +#include <fwil.h> #include "vops.h" @@ -21,7 +22,15 @@ static void brcmf_wcc_detach(struct brcmf_pub *drvr) pr_debug("%s: executing\n", __func__); } +static int brcmf_wcc_set_sae_pwd(struct brcmf_if *ifp, + struct cfg80211_crypto_settings *crypto) +{ + return brcmf_set_wsec(ifp, crypto->sae_pwd, crypto->sae_pwd_len, + BRCMF_WSEC_PASSPHRASE); +} + const struct brcmf_fwvid_ops brcmf_wcc_ops = { .attach = brcmf_wcc_attach, .detach = brcmf_wcc_detach, + .set_sae_password = brcmf_wcc_set_sae_pwd, };