diff mbox series

[PULL,37/41] target/arm: Mark up VNCR offsets (offsets >= 0x200, except GIC)

Message ID 20240111110505.1563291-38-peter.maydell@linaro.org
State Accepted
Commit f5bd261a61b8d30bb6ead9dce2125576d3bdc626
Headers show
Series [PULL,01/41] hw/arm: add cache controller for Freescale i.MX6 | expand

Commit Message

Peter Maydell Jan. 11, 2024, 11:05 a.m. UTC 
Mark up the cpreginfo structs to indicate offsets for system
registers from VNCR_EL2, as defined in table D8-66 in rule R_CSRPQ in
the Arm ARM.  This covers all the remaining offsets at 0x200 and
above, except for the GIC ICH_* registers.

(Note that because we don't implement FEAT_SPE, FEAT_TRF,
FEAT_MPAM, FEAT_BRBE or FEAT_AMUv1p1 we don't implement any
of the registers that use offsets at 0x800 and above.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
---
 target/arm/helper.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/target/arm/helper.c b/target/arm/helper.c
index aa66f5169ab..4550ff7ffde 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -4287,6 +4287,7 @@  static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = {
       .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_FAR_EL1,
+      .nv2_redirect_offset = 0x220 | NV2_REDIR_NV1,
       .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]),
       .resetvalue = 0, },
 };
@@ -4302,6 +4303,7 @@  static const ARMCPRegInfo vmsa_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_TTBR0_EL1,
+      .nv2_redirect_offset = 0x200 | NV2_REDIR_NV1,
       .writefn = vmsa_ttbr_write, .resetvalue = 0, .raw_writefn = raw_write,
       .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
                              offsetof(CPUARMState, cp15.ttbr0_ns) } },
@@ -4309,6 +4311,7 @@  static const ARMCPRegInfo vmsa_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1,
       .access = PL1_RW, .accessfn = access_tvm_trvm,
       .fgt = FGT_TTBR1_EL1,
+      .nv2_redirect_offset = 0x210 | NV2_REDIR_NV1,
       .writefn = vmsa_ttbr_write, .resetvalue = 0, .raw_writefn = raw_write,
       .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
                              offsetof(CPUARMState, cp15.ttbr1_ns) } },
@@ -5741,6 +5744,7 @@  static const ARMCPRegInfo v8_cp_reginfo[] = {
       .type = ARM_CP_ALIAS,
       .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 1,
       .access = PL1_RW, .accessfn = access_nv1,
+      .nv2_redirect_offset = 0x230 | NV2_REDIR_NV1,
       .fieldoffset = offsetof(CPUARMState, elr_el[1]) },
     { .name = "SPSR_EL1", .state = ARM_CP_STATE_AA64,
       .type = ARM_CP_ALIAS,
@@ -5760,6 +5764,7 @@  static const ARMCPRegInfo v8_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, sp_el[0]) },
     { .name = "SP_EL1", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 1, .opc2 = 0,
+      .nv2_redirect_offset = 0x240,
       .access = PL2_RW, .type = ARM_CP_ALIAS | ARM_CP_EL3_NO_EL2_KEEP,
       .fieldoffset = offsetof(CPUARMState, sp_el[1]) },
     { .name = "SPSel", .state = ARM_CP_STATE_AA64,
@@ -6882,9 +6887,11 @@  static const ARMCPRegInfo minimal_ras_reginfo[] = {
       .type = ARM_CP_CONST, .resetvalue = 0 },
     { .name = "VDISR_EL2", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 1, .opc2 = 1,
+      .nv2_redirect_offset = 0x500,
       .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vdisr_el2) },
     { .name = "VSESR_EL2", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 3,
+      .nv2_redirect_offset = 0x508,
       .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.vsesr_el2) },
 };
 
@@ -9548,6 +9555,7 @@  void register_cp_regs_for_features(ARMCPU *cpu)
               .access = PL1_RW, .writefn = vbar_write,
               .accessfn = access_nv1,
               .fgt = FGT_VBAR_EL1,
+              .nv2_redirect_offset = 0x250 | NV2_REDIR_NV1,
               .bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s),
                                      offsetof(CPUARMState, cp15.vbar_ns) },
               .resetvalue = 0 },