diff mbox series

[v9,02/16] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV

Message ID 20240119171122.3057511-3-Frank.Li@nxp.com
State Accepted
Commit 4e37c2f48712d5874619685819e1cf7307f60840
Headers show
Series PCI: imx6: Clean up and add imx95 pci support | expand

Commit Message

Frank Li Jan. 19, 2024, 5:11 p.m. UTC
Since some i.MX platforms make use of the separate PHY driver, use
IMX6_PCIE_FLAG_HAS_PHYDRV flag to identify them and get the reference to
PHY from DT. This simplifies the code.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v8 to v9:
    - change commit message according Manivannan's suggestion
    - Add Manivannan's review tag
    Change from v7 to v8:
    - renmae IMX6_PCIE_FLAG_HAS_PHY to IMX6_PCIE_FLAG_HAS_PHYDRV
    Change from v6 to v7:
    - none
    Change from v4 to v5:
    - none, Keep IMX6_PCIE_FLAG_HAS_PHY to indicate dts mismatch when platform
    require phy suppport.
    
    Change from v1 to v3:
    - none

 drivers/pci/controller/dwc/pci-imx6.c | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 0997dd7d901a4..a33ec006660c8 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -60,6 +60,9 @@  enum imx6_pcie_variants {
 #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
 #define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE	BIT(1)
 #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND		BIT(2)
+#define IMX6_PCIE_FLAG_HAS_PHYDRV			BIT(3)
+
+#define imx6_check_flag(pci, val)     (pci->drvdata->flags & val)
 
 #define IMX6_PCIE_MAX_CLKS       6
 
@@ -1277,6 +1280,13 @@  static int imx6_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHYDRV)) {
+		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+		if (IS_ERR(imx6_pcie->phy))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+					     "failed to get pcie phy\n");
+	}
+
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX7D:
 		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
@@ -1306,11 +1316,6 @@  static int imx6_pcie_probe(struct platform_device *pdev)
 			return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
 					     "failed to get pcie apps reset control\n");
 
-		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
-		if (IS_ERR(imx6_pcie->phy))
-			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
-					     "failed to get pcie phy\n");
-
 		break;
 	default:
 		break;
@@ -1454,14 +1459,17 @@  static const struct imx6_pcie_drvdata drvdata[] = {
 	},
 	[IMX8MM] = {
 		.variant = IMX8MM,
-		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+			 IMX6_PCIE_FLAG_HAS_PHYDRV |
+			 IMX6_PCIE_FLAG_HAS_APP_RESET,
 		.gpr = "fsl,imx8mm-iomuxc-gpr",
 		.clk_names = imx8mm_clks,
 		.clks_cnt = ARRAY_SIZE(imx8mm_clks),
 	},
 	[IMX8MP] = {
 		.variant = IMX8MP,
-		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+			 IMX6_PCIE_FLAG_HAS_PHYDRV,
 		.gpr = "fsl,imx8mp-iomuxc-gpr",
 		.clk_names = imx8mm_clks,
 		.clks_cnt = ARRAY_SIZE(imx8mm_clks),
@@ -1475,6 +1483,7 @@  static const struct imx6_pcie_drvdata drvdata[] = {
 	},
 	[IMX8MM_EP] = {
 		.variant = IMX8MM_EP,
+		.flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
 		.mode = DW_PCIE_EP_TYPE,
 		.gpr = "fsl,imx8mm-iomuxc-gpr",
 		.clk_names = imx8mm_clks,
@@ -1482,6 +1491,7 @@  static const struct imx6_pcie_drvdata drvdata[] = {
 	},
 	[IMX8MP_EP] = {
 		.variant = IMX8MP_EP,
+		.flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
 		.mode = DW_PCIE_EP_TYPE,
 		.gpr = "fsl,imx8mp-iomuxc-gpr",
 		.clk_names = imx8mm_clks,