@@ -4952,6 +4952,12 @@ R: Sami Kyöstilä <skyostil@chromium.org>
S: Maintained
F: drivers/platform/chrome/cros_hps_i2c.c
+CHROMEOS EC WATCHDOG
+M: Lukasz Majczak <lma@chromium.org>
+L: chrome-platform@lists.linux.dev
+S: Maintained
+F: drivers/watchdog/cros_ec_wdt.c
+
CHRONTEL CH7322 CEC DRIVER
M: Joe Tessler <jrt@google.com>
L: linux-media@vger.kernel.org
@@ -91,6 +91,10 @@ static const struct mfd_cell cros_usbpd_notify_cells[] = {
{ .name = "cros-usbpd-notify", },
};
+static const struct mfd_cell cros_ec_wdt_cells[] = {
+ { .name = "cros-ec-wdt-drv", }
+};
+
static const struct cros_feature_to_cells cros_subdevices[] = {
{
.id = EC_FEATURE_CEC,
@@ -107,6 +111,11 @@ static const struct cros_feature_to_cells cros_subdevices[] = {
.mfd_cells = cros_usbpd_charger_cells,
.num_cells = ARRAY_SIZE(cros_usbpd_charger_cells),
},
+ {
+ .id = EC_FEATURE_HANG_DETECT,
+ .mfd_cells = cros_ec_wdt_cells,
+ .num_cells = ARRAY_SIZE(cros_ec_wdt_cells),
+ },
};
static const struct mfd_cell cros_ec_platform_cells[] = {
@@ -2251,4 +2251,19 @@ config KEEMBAY_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called keembay_wdt.
+#
+# ChromeOS EC-based Watchdog
+#
+
+config CROS_EC_WATCHDOG
+ tristate "ChromeOS EC-based watchdog driver"
+ select WATCHDOG_CORE
+ depends on CROS_EC
+ help
+ This is the watchdog driver for ChromeOS devices equipped with EC.
+ The EC watchdog - when enabled - expects to be kicked within a given
+ time (default set to 30 seconds) otherwise it will simple reboot
+ the AP. Priori to that it can also send an event (configurable timeout)
+ about upcoming reboot.
+
endif # WATCHDOG
@@ -234,3 +234,6 @@ obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o
+
+# Cros EC watchdog
+obj-$(CONFIG_CROS_EC_WATCHDOG) += cros_ec_wdt.o
new file mode 100644
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#define CROS_EC_WATCHDOG_DEFAULT_TIME 30 /* seconds */
+
+#define DEV_NAME "cros-ec-wdt-dev"
+#define DRV_NAME "cros-ec-wdt-drv"
+
+static int cros_ec_wdt_ping(struct watchdog_device *wdd);
+static int cros_ec_wdt_start(struct watchdog_device *wdd);
+static int cros_ec_wdt_stop(struct watchdog_device *wdd);
+static int cros_ec_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t);
+
+struct cros_ec_wdt_data {
+ bool start_on_resume;
+ bool keepalive_on;
+ struct cros_ec_device *cros_ec;
+ struct watchdog_device *wdd;
+};
+static struct cros_ec_wdt_data wd_data;
+
+static const struct watchdog_info cros_ec_wdt_ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .firmware_version = 0,
+ .identity = DRV_NAME,
+};
+
+static const struct watchdog_ops cros_ec_wdt_ops = {
+ .owner = THIS_MODULE,
+ .ping = cros_ec_wdt_ping,
+ .start = cros_ec_wdt_start,
+ .stop = cros_ec_wdt_stop,
+ .set_timeout = cros_ec_wdt_set_timeout,
+};
+
+static struct watchdog_device cros_ec_wdd = {
+ .info = &cros_ec_wdt_ident,
+ .ops = &cros_ec_wdt_ops,
+ .timeout = CROS_EC_WATCHDOG_DEFAULT_TIME,
+ .bootstatus = EC_HANG_DETECT_AP_BOOT_NORMAL
+};
+
+static int cros_ec_wdt_send_hang_detect(struct cros_ec_wdt_data *wd_data,
+ uint16_t command,
+ uint16_t reboot_timeout_sec,
+ uint32_t *status)
+{
+ int ret;
+
+ struct {
+ struct cros_ec_command msg;
+ union {
+ struct ec_params_hang_detect req;
+ struct ec_response_hang_detect resp;
+ };
+ } __packed buf = {
+ .msg = {
+ .version = 0,
+ .command = EC_CMD_HANG_DETECT,
+ .insize = (command == EC_HANG_DETECT_CMD_GET_STATUS) ?
+ sizeof(struct ec_response_hang_detect) :
+ 0,
+ .outsize = sizeof(struct ec_params_hang_detect),
+ },
+ .req = {
+ .command = command,
+ .reboot_timeout_sec = reboot_timeout_sec,
+ }
+ };
+
+ ret = cros_ec_cmd_xfer_status(wd_data->cros_ec, &buf.msg);
+ if (ret < 0) {
+ dev_warn(wd_data->wdd->parent,
+ "cros_ec_cmd_xfer_status failed(%d) command (%04x) reboot_timeout_sec(%ds)",
+ ret, command, reboot_timeout_sec);
+ return ret;
+ }
+
+ if (status && (command == EC_HANG_DETECT_CMD_GET_STATUS)) {
+ *status = buf.resp.status;
+ dev_info(wd_data->wdd->parent, "EC Watchdog boot status (%d)",
+ buf.resp.status);
+ }
+
+ return 0;
+}
+
+static int cros_ec_wdt_ping(struct watchdog_device *wdd)
+{
+ struct cros_ec_wdt_data *wd_data = watchdog_get_drvdata(wdd);
+ int ret;
+
+ ret = cros_ec_wdt_send_hang_detect(wd_data, EC_HANG_DETECT_CMD_RELOAD,
+ 0, NULL);
+ if (ret < 0)
+ dev_err(wdd->parent, "%s failed (%d)", __func__, ret);
+ else
+ wd_data->keepalive_on = true;
+
+ return ret;
+}
+
+static int cros_ec_wdt_start(struct watchdog_device *wdd)
+{
+ struct cros_ec_wdt_data *wd_data = watchdog_get_drvdata(wdd);
+ int ret = 0;
+
+ /* Prepare watchdog on EC side */
+ ret = cros_ec_wdt_send_hang_detect(wd_data,
+ EC_HANG_DETECT_CMD_SET_TIMEOUT,
+ wdd->timeout,
+ NULL);
+ if (ret < 0)
+ dev_err(wdd->parent, "%s failed (%d)", __func__, ret);
+
+ return ret;
+}
+
+static int cros_ec_wdt_stop(struct watchdog_device *wdd)
+{
+ struct cros_ec_wdt_data *wd_data = watchdog_get_drvdata(wdd);
+ int ret = 0;
+
+ if (wd_data->keepalive_on) {
+ wd_data->keepalive_on = false;
+ ret = cros_ec_wdt_send_hang_detect(wd_data, EC_HANG_DETECT_CMD_CANCEL,
+ 0, NULL);
+ if (ret < 0)
+ dev_err(wdd->parent, "%s failed (%d)", __func__, ret);
+ }
+
+ return ret;
+}
+
+static int cros_ec_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
+{
+ struct cros_ec_wdt_data *wd_data = watchdog_get_drvdata(wdd);
+ int ret;
+
+ if (t < EC_HANG_DETECT_MIN_TIMEOUT) {
+ dev_err(wdd->parent,
+ "%s failed, requested timeout is lower than min(%d < %d)",
+ __func__, t, EC_HANG_DETECT_MIN_TIMEOUT);
+ return -EINVAL;
+ }
+
+ ret = cros_ec_wdt_send_hang_detect(wd_data,
+ EC_HANG_DETECT_CMD_SET_TIMEOUT,
+ t, NULL);
+ if (ret < 0)
+ dev_err(wdd->parent, "%s failed (%d)", __func__, ret);
+ else
+ wdd->timeout = t;
+
+ return ret;
+}
+
+static int cros_ec_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ /* We need to get a reference to cros_ec_devices
+ * (provides communication layer) which is a parent of
+ * the cros-ec-dev (our parent)
+ */
+ struct cros_ec_device *cros_ec = dev_get_drvdata(dev->parent->parent);
+ int ret = 0;
+ uint32_t bootstatus;
+
+ if (!cros_ec) {
+ ret = -ENODEV;
+ dev_err_probe(dev, ret, "There is no coresponding EC device!");
+ return ret;
+ }
+
+ cros_ec_wdd.parent = &pdev->dev;
+ wd_data.cros_ec = cros_ec;
+ wd_data.wdd = &cros_ec_wdd;
+ wd_data.start_on_resume = false;
+ wd_data.keepalive_on = false;
+ wd_data.wdd->timeout = CROS_EC_WATCHDOG_DEFAULT_TIME;
+
+ watchdog_stop_on_reboot(&cros_ec_wdd);
+ watchdog_stop_on_unregister(&cros_ec_wdd);
+ watchdog_set_drvdata(&cros_ec_wdd, &wd_data);
+ platform_set_drvdata(pdev, &wd_data);
+
+ /* Get current AP boot status */
+ ret = cros_ec_wdt_send_hang_detect(&wd_data, EC_HANG_DETECT_CMD_GET_STATUS, 0,
+ &bootstatus);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "Couldn't get AP boot status from EC");
+ return ret;
+ }
+
+ /*
+ * If bootstatus is not EC_HANG_DETECT_AP_BOOT_NORMAL
+ * it mens EC has rebooted the AP due to watchdog timeout.
+ * Lets translate it to watchdog core status code.
+ */
+ if (bootstatus != EC_HANG_DETECT_AP_BOOT_NORMAL)
+ wd_data.wdd->bootstatus = WDIOF_CARDRESET;
+
+ ret = watchdog_register_device(&cros_ec_wdd);
+ if (ret < 0)
+ dev_err_probe(dev, ret, "Couldn't get AP boot status from EC");
+
+ return ret;
+}
+
+static int cros_ec_wdt_remove(struct platform_device *pdev)
+{
+ struct cros_ec_wdt_data *wd_data = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(wd_data->wdd);
+
+ return 0;
+}
+
+static void cros_ec_wdt_shutdown(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cros_ec_wdt_data *wd_data = platform_get_drvdata(pdev);
+ int ret;
+
+ /*
+ * Clean only bootstatus flag.
+ * EC wdt is are already stopped by watchdog framework.
+ */
+ ret = cros_ec_wdt_send_hang_detect(wd_data,
+ EC_HANG_DETECT_CMD_CLEAR_STATUS, 0, NULL);
+ if (ret < 0)
+ dev_err(dev, "%s failed (%d)", __func__, ret);
+
+ watchdog_unregister_device(wd_data->wdd);
+}
+
+static int __maybe_unused cros_ec_wdt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct device *dev = &pdev->dev;
+ struct cros_ec_wdt_data *wd_data = platform_get_drvdata(pdev);
+ int ret;
+
+ if (watchdog_active(wd_data->wdd)) {
+ ret = cros_ec_wdt_send_hang_detect(wd_data,
+ EC_HANG_DETECT_CMD_CANCEL, 0, NULL);
+ if (ret < 0)
+ dev_err(dev, "%s failed (%d)", __func__, ret);
+ wd_data->start_on_resume = true;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused cros_ec_wdt_resume(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cros_ec_wdt_data *wd_data = platform_get_drvdata(pdev);
+ int ret;
+
+ /* start_on_resume is only set if watchdog was active
+ * when device was going to sleep
+ */
+ if (wd_data->start_on_resume) {
+ /* On resume we just need to setup a EC watchdog the same way as
+ * in cros_ec_wdt_start(). When userspace resumes from suspend
+ * the watchdog app should just start petting the watchdog again.
+ */
+ ret = cros_ec_wdt_start(wd_data->wdd);
+ if (ret < 0)
+ dev_err(dev, "%s failed (%d)", __func__, ret);
+
+ wd_data->start_on_resume = false;
+ }
+
+ return 0;
+}
+
+static struct platform_driver cros_ec_wdt_driver = {
+ .probe = cros_ec_wdt_probe,
+ .remove = cros_ec_wdt_remove,
+ .shutdown = cros_ec_wdt_shutdown,
+ .suspend = pm_ptr(cros_ec_wdt_suspend),
+ .resume = pm_ptr(cros_ec_wdt_resume),
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+module_platform_driver(cros_ec_wdt_driver);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("Cros EC Watchdog Device Driver");
+MODULE_LICENSE("GPL");
@@ -3961,60 +3961,50 @@ struct ec_response_i2c_passthru {
} __ec_align1;
/*****************************************************************************/
-/* Power button hang detect */
-
+/* AP hang detect */
#define EC_CMD_HANG_DETECT 0x009F
-/* Reasons to start hang detection timer */
-/* Power button pressed */
-#define EC_HANG_START_ON_POWER_PRESS BIT(0)
-
-/* Lid closed */
-#define EC_HANG_START_ON_LID_CLOSE BIT(1)
-
- /* Lid opened */
-#define EC_HANG_START_ON_LID_OPEN BIT(2)
-
-/* Start of AP S3->S0 transition (booting or resuming from suspend) */
-#define EC_HANG_START_ON_RESUME BIT(3)
-
-/* Reasons to cancel hang detection */
+#define EC_HANG_DETECT_MIN_TIMEOUT 5
-/* Power button released */
-#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8)
+/* EC hang detect commands */
+enum ec_hang_detect_cmds {
+ /* Reload AP hang detect timer. */
+ EC_HANG_DETECT_CMD_RELOAD = 0x0,
-/* Any host command from AP received */
-#define EC_HANG_STOP_ON_HOST_COMMAND BIT(9)
+ /* Stop AP hang detect timer. */
+ EC_HANG_DETECT_CMD_CANCEL = 0x1,
-/* Stop on end of AP S0->S3 transition (suspending or shutting down) */
-#define EC_HANG_STOP_ON_SUSPEND BIT(10)
+ /* Configure watchdog with given reboot timeout and
+ * cancel currently running AP hand detect timer.
+ */
+ EC_HANG_DETECT_CMD_SET_TIMEOUT = 0x2,
-/*
- * If this flag is set, all the other fields are ignored, and the hang detect
- * timer is started. This provides the AP a way to start the hang timer
- * without reconfiguring any of the other hang detect settings. Note that
- * you must previously have configured the timeouts.
- */
-#define EC_HANG_START_NOW BIT(30)
+ /* Get last hang status - whether the AP boot was clear or not */
+ EC_HANG_DETECT_CMD_GET_STATUS = 0x3,
-/*
- * If this flag is set, all the other fields are ignored (including
- * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer
- * without reconfiguring any of the other hang detect settings.
- */
-#define EC_HANG_STOP_NOW BIT(31)
+ /* Clear last hang status. Called when AP is rebooting/shutting down
+ * gracefully.
+ */
+ EC_HANG_DETECT_CMD_CLEAR_STATUS = 0x4
+};
struct ec_params_hang_detect {
- /* Flags; see EC_HANG_* */
- uint32_t flags;
-
- /* Timeout in msec before generating host event, if enabled */
- uint16_t host_event_timeout_msec;
-
- /* Timeout in msec before generating warm reboot, if enabled */
- uint16_t warm_reboot_timeout_msec;
-} __ec_align4;
+ uint16_t command; /* enum ec_hang_detect_cmds */
+ /* Timeout in seconds before generating reboot */
+ uint16_t reboot_timeout_sec;
+} __ec_align2;
+/* Status codes that describe whether AP has boot normally or the hang has been
+ * detected and EC has reset AP
+ */
+enum ec_hang_detect_status {
+ EC_HANG_DETECT_AP_BOOT_NORMAL = 0x0,
+ EC_HANG_DETECT_AP_BOOT_EC_WDT = 0x1,
+ EC_HANG_DETECT_AP_BOOT_COUNT,
+};
+struct ec_response_hang_detect {
+ uint8_t status; /* enum ec_hang_detect_status */
+} __ec_align1;
/*****************************************************************************/
/* Commands for battery charging */
This adds EC-based watchdog support for ChromeOS based devices equipped with embedded controller (EC). Signed-off-by: Lukasz Majczak <lma@chromium.org> --- MAINTAINERS | 6 + drivers/mfd/cros_ec_dev.c | 9 + drivers/watchdog/Kconfig | 15 + drivers/watchdog/Makefile | 3 + drivers/watchdog/cros_ec_wdt.c | 303 ++++++++++++++++++ .../linux/platform_data/cros_ec_commands.h | 78 ++--- 6 files changed, 370 insertions(+), 44 deletions(-) create mode 100644 drivers/watchdog/cros_ec_wdt.c