new file mode 100644
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMFM2000 Dual Microwave Down Converter
+
+maintainers:
+ - Kim Seer Paller <kimseer.paller@analog.com>
+
+description:
+ Dual microwave down converter module with input RF and LO frequency ranges
+ from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz.
+ It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down
+ conversion path.
+
+properties:
+ compatible:
+ enum:
+ - adi,admfm2000
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^channel@[0-1]$":
+ type: object
+ description: Represents a channel of the device.
+
+ additionalProperties: false
+
+ properties:
+ reg:
+ description:
+ The channel number.
+ minimum: 0
+ maximum: 1
+
+ adi,mixer-mode:
+ description:
+ Enable mixer mode for the channel. It downconverts RF between 5 GHz
+ and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel
+ is in direct IF mode which bypasses the mixer and downconverts RF
+ between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz.
+ type: boolean
+
+ switch-gpios:
+ description: |
+ GPIOs to select the RF path for the channel. The same state of CTRL-A
+ and CTRL-B GPIOs is not permitted.
+ CTRL-A CTRL-B CH1 Status CH2 Status
+ 1 0 Direct IF mode Mixer mode
+ 0 1 Mixer mode Direct IF mode
+
+ items:
+ - description: CTRL-A GPIO
+ - description: CTRL-B GPIO
+
+ attenuation-gpios:
+ description: |
+ Choice of attenuation:
+ DSA-V4 DSA-V3 DSA-V2 DSA-V1 DSA-V0
+ 1 1 1 1 1 0 dB
+ 1 1 1 1 0 -1 dB
+ 1 1 1 0 1 -2 dB
+ 1 1 0 1 1 -4 dB
+ 1 0 1 1 1 -8 dB
+ 0 1 1 1 1 -16 dB
+ 0 0 0 0 0 -31 dB
+
+ items:
+ - description: DSA-V0 GPIO
+ - description: DSA-V1 GPIO
+ - description: DSA-V2 GPIO
+ - description: DSA-V3 GPIO
+ - description: DSA-V4 GPIO
+
+ required:
+ - reg
+ - switch-gpios
+ - attenuation-gpios
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ converter {
+ compatible = "adi,admfm2000";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>,
+ <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+ attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>,
+ <&gpio 22 GPIO_ACTIVE_LOW>,
+ <&gpio 23 GPIO_ACTIVE_LOW>,
+ <&gpio 24 GPIO_ACTIVE_LOW>,
+ <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ adi,mixer-mode;
+ switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>,
+ <&gpio 4 GPIO_ACTIVE_HIGH>;
+
+ attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+ <&gpio 5 GPIO_ACTIVE_LOW>,
+ <&gpio 6 GPIO_ACTIVE_LOW>,
+ <&gpio 16 GPIO_ACTIVE_LOW>,
+ <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+...
@@ -1267,6 +1267,13 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
F: drivers/hwmon/adm1177.c
+ANALOG DEVICES INC ADMFM2000 DRIVER
+M: Kim Seer Paller <kimseer.paller@analog.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
+
ANALOG DEVICES INC ADMV1013 DRIVER
M: Antoniu Miclaus <antoniu.miclaus@analog.com>
L: linux-iio@vger.kernel.org
Dual microwave down converter module with input RF and LO frequency ranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down conversion path. Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> --- V7 -> V8: Added adequate description for mixer mode property. Modified description for switch gpio property. V6 -> V7: Changed RF path mode property to boolean. V5 -> V6: Moved array of switch and attenuation GPIOs to the channel node. Changed pin coords with friendly names. Removed Reviewed-by tag. V4 -> V5: Added Reviewed-by tag. V3 -> V4: Updated the description of the properties with multiple entries and defined the order. V2 -> V3: Adjusted indentation to resolve wrong indentation warning. Changed node name to converter. Updated the descriptions to clarify the properties. V1 -> V2: Removed '|' after description. Specified the pins connected to the GPIOs. Added additionalProperties: false. Changed node name to gpio. Aligned < syntax with the previous syntax in the examples. .../bindings/iio/frequency/adi,admfm2000.yaml | 127 ++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 134 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml base-commit: 7ed2632ec7d72e926b9e8bcc9ad1bb0cd37274bf