diff mbox series

[3/4] arm64: dts: qcom: sm8550-qrd: add correct analogue microphones

Message ID 20240124164505.293202-3-krzysztof.kozlowski@linaro.org
State Accepted
Commit e2f1a18747b1bcb48900290d8f4de13e2ee55cbb
Headers show
Series [1/4] arm64: dts: qcom: sm8550-qrd: correct WCD9385 TX port mapping | expand

Commit Message

Krzysztof Kozlowski Jan. 24, 2024, 4:45 p.m. UTC 
Add proper audio routes for onboard analogue microphones AMIC[1345] -
MIC biases and route from TX macro codec to WCD9385 audio codec.

This finally brings AMIC1, AMIC3, AMIC4 and AMIC5 onboard microphones to
work.  AMIC2 (headphones) should be fine well, however it didn't work
during tests, probably because of incomplete USB switch.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 76e9ca954093..79ec673f9f7c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -123,14 +123,21 @@  sound {
 				"SpkrRight IN", "WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
+				"AMIC1", "MIC BIAS1",
 				"AMIC2", "MIC BIAS2",
+				"AMIC3", "MIC BIAS3",
+				"AMIC4", "MIC BIAS3",
+				"AMIC5", "MIC BIAS4",
 				"VA DMIC0", "MIC BIAS1",
 				"VA DMIC1", "MIC BIAS1",
 				"VA DMIC2", "MIC BIAS3",
 				"TX DMIC0", "MIC BIAS1",
 				"TX DMIC1", "MIC BIAS2",
 				"TX DMIC2", "MIC BIAS3",
-				"TX SWR_ADC1", "ADC2_OUTPUT";
+				"TX SWR_INPUT0", "ADC1_OUTPUT",
+				"TX SWR_INPUT1", "ADC2_OUTPUT",
+				"TX SWR_INPUT0", "ADC3_OUTPUT",
+				"TX SWR_INPUT1", "ADC4_OUTPUT";
 
 		wcd-playback-dai-link {
 			link-name = "WCD Playback";