diff mbox series

[v2,26/28] spi: s3c64xx: add iowrite{8,16}_32_rep accessors

Message ID 20240125145007.748295-27-tudor.ambarus@linaro.org
State New
Headers show
Series spi: s3c64xx: winter cleanup and gs101 support | expand

Commit Message

Tudor Ambarus Jan. 25, 2024, 2:50 p.m. UTC
There are SoCs that allow just 32 bit register accesses otherwise they
throw a SError interrupt if accessing the bus with 8 or 16 bits widths.
Such an SoC is the google gs101. Allow such SoCs to use the
iowrite{8,16}_32_rep accessors.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
 drivers/spi/spi-s3c64xx.c | 46 +++++++++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fa70c6aab7c2..35a2d5554dfd 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -139,6 +139,7 @@  struct s3c64xx_spi_dma_data {
  *	prescaler unit.
  * @clk_ioclk: True if clock is present on this device
  * @has_loopback: True if loopback mode can be supported
+ * @use_32bit_io: True if the SoC allows just 32-bit register accesses.
  *
  * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but
  * differ in some aspects such as the size of the fifo and spi bus clock
@@ -156,6 +157,7 @@  struct s3c64xx_spi_port_config {
 	bool	clk_from_cmu;
 	bool	clk_ioclk;
 	bool	has_loopback;
+	bool	use_32bit_io;
 };
 
 /**
@@ -412,6 +414,35 @@  static bool s3c64xx_spi_can_dma(struct spi_controller *host,
 	return false;
 }
 
+static void s3c64xx_iowrite_rep(const struct s3c64xx_spi_driver_data *sdd,
+				struct spi_transfer *xfer)
+{
+	void __iomem *regs = sdd->regs;
+
+	switch (sdd->cur_bpw) {
+	case 32:
+		iowrite32_rep(regs + S3C64XX_SPI_TX_DATA,
+			      xfer->tx_buf, xfer->len / 4);
+		break;
+	case 16:
+		if (sdd->port_conf->use_32bit_io)
+			iowrite16_32_rep(regs + S3C64XX_SPI_TX_DATA,
+					 xfer->tx_buf, xfer->len / 2);
+		else
+			iowrite16_rep(regs + S3C64XX_SPI_TX_DATA,
+				      xfer->tx_buf, xfer->len / 2);
+		break;
+	default:
+		if (sdd->port_conf->use_32bit_io)
+			iowrite8_32_rep(regs + S3C64XX_SPI_TX_DATA,
+					xfer->tx_buf, xfer->len);
+		else
+			iowrite8_rep(regs + S3C64XX_SPI_TX_DATA,
+				     xfer->tx_buf, xfer->len);
+		break;
+	}
+}
+
 static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 				    struct spi_transfer *xfer, int dma_mode)
 {
@@ -445,20 +476,7 @@  static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd,
 			modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
 			ret = s3c64xx_prepare_dma(&sdd->tx_dma, &xfer->tx_sg);
 		} else {
-			switch (sdd->cur_bpw) {
-			case 32:
-				iowrite32_rep(regs + S3C64XX_SPI_TX_DATA,
-					xfer->tx_buf, xfer->len / 4);
-				break;
-			case 16:
-				iowrite16_rep(regs + S3C64XX_SPI_TX_DATA,
-					xfer->tx_buf, xfer->len / 2);
-				break;
-			default:
-				iowrite8_rep(regs + S3C64XX_SPI_TX_DATA,
-					xfer->tx_buf, xfer->len);
-				break;
-			}
+			s3c64xx_iowrite_rep(sdd, xfer);
 		}
 	}