| Message ID | 20240210-topic-1v-v1-7-fda0db38e29b@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Xperia 1 V support | expand |
On 04/04/2024 21:41, Konrad Dybcio wrote: > > > On 2/12/24 18:26, Neil Armstrong wrote: >> On 12/02/2024 14:10, Konrad Dybcio wrote: >>> Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part >>> of the SoMC SM8550 Yodo platform. >>> > > [...] > >>> +/* TODO: Only one SID of PMR735D seems accessible? */ >> >> >> What's reported by the cpuinfo pmic array ? > > PMK8550 2.1 > PM8550 2.0 > PM8550VS 2.0 > PM8550VS 2.0 > PM8550VS 2.0 > PM8550VE 2.0 > PM8550VS 2.0 > PM8550B 2.0 > PMR735D 2.0 > PM8010 1.1 > PM8010 1.1 > > Not sure if there's only one or the other one is secure? > >> >> <snip> >> >> With the pcie thing fixed: >> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> > > It's gonna be fine with the recent aux clock additions. If you > have no further comments, I'll happily ask for this to be merged ;) Sure LGTM > > Konrad
W dniu 2024-02-12 14:10, Konrad Dybcio napisał(a): > Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part > of the SoMC SM8550 Yodo platform. > > This commit brings support for: > * Remoteprocs (sans modem for now) > * Flash LED (the notification LED is gone :((((() > * SD Card > * USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a > replug > with an cable flip sometimes..) > * Most regulators > * Part of I2C-connected peripherals (notably no touch due to a > driver bug) > * PCIe0 (PCIe1 is unused) > > Do note display via simplefb is not supported, as the display is > blanked > upon exiting XBL. > I also noticed such behaviour on my S24 Ultra. I was pointed out by Xilin Wu that on SM8450 or newer, the display will be turned off by the bootloader if the node '/reserved-memory/splash_region' does not exist in the device tree. Adding it in the device tree for my phone made the bootloader leave the display on. Maybe it's the same case here? https://git.codelinaro.org/clo/la/abl/tianocore/edk2/-/blob/LA.VENDOR.1.0.r2-09400-WAIPIO.QSSI14.0/QcomModulePkg/Library/BootLib/UpdateDeviceTree.c?ref_type=tags#L220 > To create a working boot image, you need to run: > cat arch/arm64/boot/Image.gz > arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\ > yodo-pdx234.dtb > .Image.gz-dtb > > mkbootimg \ > --kernel .Image.gz-dtb \ > --ramdisk some_initrd.img \ > --pagesize 4096 \ > --base 0x0 \ > --kernel_offset 0x8000 \ > --ramdisk_offset 0x1000000 \ > --tags_offset 0x100 \ > --cmdline "SOME_CMDLINE" \ > --dtb_offset 0x1f00000 \ > --header_version 2 \ > -o boot.img-sony-xperia-pdx234 > > Then, you need to flash it on the device and get rid of all the > vendor_boot/dtbo mess: > > // You have to either pull vbmeta{"","_system"} from > // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build > process > fastboot --disable-verity --disable-verification flash vbmeta > vbmeta.img > fastboot --disable-verity --disable-verification flash vbmeta_system \ > vbmeta_system.img > > fastboot flash boot boot.img-sony-xperia-pdx234 > fastboot erase vendor_boot > fastboot erase recovery > fastboot flash dtbo emptydtbo.img > fastboot erase init_boot // ? I don't remember if it's necessary, sorry > fastboot continue > > Where emptydtbo.img is a tiny file that consists of 2 bytes (all > zeroes), doing > a "fastboot erase" won't cut it, the bootloader will go crazy and > things will > fall apart when it tries to overlay random bytes from an empty > partition onto a > perfectly good appended DTB. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 779 > +++++++++++++++++++++ > 2 files changed, 780 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/Makefile > b/arch/arm64/boot/dts/qcom/Makefile > index f7c5662213e4..9bbea531660d 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_QCOM) += > sm8450-sony-xperia-nagara-pdx224.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb > dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb > diff --git > a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts > b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts > new file mode 100644 > index 000000000000..85e0d3d66e16 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts > @@ -0,0 +1,779 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/firmware/qcom,scm.h> > +#include <dt-bindings/leds/common.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include <dt-bindings/sound/cs35l45.h> > +#include "sm8550.dtsi" > +#include "pm8010.dtsi" > +#include "pm8550.dtsi" > +#include "pm8550b.dtsi" > +#define PMK8550VE_SID 5 > +#include "pm8550ve.dtsi" > +#include "pm8550vs.dtsi" > +#include "pmk8550.dtsi" > +/* TODO: Only one SID of PMR735D seems accessible? */ > + > +/delete-node/ &hwfence_shbuf; > +/delete-node/ &mpss_mem; > +/delete-node/ &rmtfs_mem; > +/ { > + model = "Sony Xperia 1 V"; > + compatible = "sony,pdx234", "qcom,sm8550"; > + chassis-type = "handset"; > + > + aliases { > + i2c0 = &i2c0; > + i2c4 = &i2c4; > + i2c10 = &i2c10; > + i2c11 = &i2c11; > + i2c16 = &i2c_hub_2; > + serial0 = &uart7; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + label = "gpio-keys"; > + > + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; > + pinctrl-names = "default"; > + > + key-camera-focus { > + label = "Camera Focus"; > + linux,code = <KEY_CAMERA_FOCUS>; > + gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + > + key-camera-snapshot { > + label = "Camera Snapshot"; > + gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_CAMERA>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + > + key-volume-down { > + label = "Volume Down"; > + linux,code = <KEY_VOLUMEDOWN>; > + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + pmic-glink { > + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; > + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_hs_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_ss_in: endpoint { > + remote-endpoint = <&usb_dp_qmpphy_out>; > + }; > + }; > + }; > + }; > + }; > + > + reserved-memory { > + mpss_mem: mpss-region@89800000 { > + reg = <0x0 0x89800000 0x0 0x10800000>; > + no-map; > + }; > + > + splash@b8000000 { > + reg = <0x0 0xb8000000 0x0 0x2b00000>; > + no-map; > + }; > + > + hwfence_shbuf: hwfence-shbuf-region@e6440000 { > + reg = <0x0 0xe6440000 0x0 0x2dd000>; > + no-map; > + }; > + > + rmtfs_mem: memory@f8b00000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0x0 0xf8b00000 0x0 0x280000>; > + no-map; > + > + qcom,client-id = <1>; > + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; > + }; > + > + ramoops@ffd00000 { > + compatible = "ramoops"; > + reg = <0x0 0xffd00000 0x0 0xc0000>; > + console-size = <0x40000>; > + record-size = <0x1000>; > + pmsg-size = <0x40000>; > + ecc-size = <16>; > + }; > + > + rdtag-store-region@ffdc0000 { > + reg = <0x0 0xffdc0000 0x0 0x40000>; > + no-map; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8550-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + pm8550_bob1: bob1 { > + regulator-name = "pm8550_bob1"; > + regulator-min-microvolt = <3416000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver > constraints */ > + > + pm8550_l1: ldo1 { > + regulator-name = "pm8550_l1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l2: ldo2 { > + regulator-name = "pm8550_l2"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L4 exists in cmd-db, but the board seems to crash on access */ > + > + pm8550_l5: ldo5 { > + regulator-name = "pm8550_l5"; > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l6: ldo6 { > + regulator-name = "pm8550_l6"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l7: ldo7 { > + regulator-name = "pm8550_l7"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l8: ldo8 { > + regulator-name = "pm8550_l8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l9: ldo9 { > + regulator-name = "pm8550_l9"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l10: ldo10 { > + regulator-name = "pm8550_l10"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l11: ldo11 { > + regulator-name = "pm8550_l11"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l12: ldo12 { > + regulator-name = "pm8550_l12"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l13: ldo13 { > + regulator-name = "pm8550_l13"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l14: ldo14 { > + regulator-name = "pm8550_l14"; > + regulator-min-microvolt = <3304000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l15: ldo15 { > + regulator-name = "pm8550_l15"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l16: ldo16 { > + regulator-name = "pm8550_l16"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550_l17: ldo17 { > + regulator-name = "pm8550_l17"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + pm8550vs_0_l1: ldo1 { > + regulator-name = "pm8550vs_0_l1"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_0_l3: ldo3 { > + regulator-name = "pm8550vs_0_l3"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + pm8550vs_1_l1: ldo1 { > + regulator-name = "pm8550vs_1_l1"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L3 exists in cmd-db, but the board seems to crash on access */ > + }; > + > + regulators-3 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + pm8550vs_2_s4: smps4 { > + regulator-name = "pm8550vs_2_s4"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_2_s5: smps5 { > + regulator-name = "pm8550vs_2_s5"; > + regulator-min-microvolt = <1010000>; > + regulator-max-microvolt = <1120000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_2_l1: ldo1 { > + regulator-name = "pm8550vs_2_l1"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_2_l2: ldo2 { > + regulator-name = "pm8550vs_2_l2"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <968000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_2_l3: ldo3 { > + regulator-name = "pm8550vs_2_l3"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-4 { > + compatible = "qcom,pm8550ve-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + pm8550ve_s4: smps4 { > + regulator-name = "pm8550ve_s4"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <700000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550ve_l1: ldo1 { > + regulator-name = "pm8550ve_l1"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550ve_l2: ldo2 { > + regulator-name = "pm8550ve_l2"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550ve_l3: ldo3 { > + regulator-name = "pm8550ve_l3"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-5 { > + compatible = "qcom,pm8550vs-rpmh-regulators"; > + qcom,pmic-id = "g"; > + > + pm8550vs_3_s1: smps1 { > + regulator-name = "pm8550vs_3_s1"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_s2: smps2 { > + regulator-name = "pm8550vs_3_s2"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1036000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_s3: smps3 { > + regulator-name = "pm8550vs_3_s3"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_s4: smps4 { > + regulator-name = "pm8550vs_3_s4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1352000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_s5: smps5 { > + regulator-name = "pm8550vs_3_s5"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1004000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_s6: smps6 { > + regulator-name = "pm8550vs_3_s6"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_l1: ldo1 { > + regulator-name = "pm8550vs_3_l1"; > + regulator-min-microvolt = <1144000>; > + regulator-max-microvolt = <1256000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_l2: ldo2 { > + regulator-name = "pm8550vs_3_l2"; > + regulator-min-microvolt = <1104000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8550vs_3_l3: ldo3 { > + regulator-name = "pm8550vs_3_l3"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */ > +}; > + > +&gpi_dma1 { > + status = "okay"; > +}; > + > +&gpi_dma2 { > + status = "okay"; > +}; > + > +&i2c_hub_2 { > + clock-frequency = <400000>; > + status = "okay"; > + > + pmic@75 { > + compatible = "dlg,slg51000"; > + reg = <0x75>; > + dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>; > + > + pinctrl-0 = <&cam_pwr_a_cs>; > + pinctrl-names = "default"; > + > + regulators { > + slg51000_a_ldo1: ldo1 { > + regulator-name = "slg51000_a_ldo1"; > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + slg51000_a_ldo2: ldo2 { > + regulator-name = "slg51000_a_ldo2"; > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + slg51000_a_ldo3: ldo3 { > + regulator-name = "slg51000_a_ldo3"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3750000>; > + }; > + > + slg51000_a_ldo4: ldo4 { > + regulator-name = "slg51000_a_ldo4"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3750000>; > + }; > + > + slg51000_a_ldo5: ldo5 { > + regulator-name = "slg51000_a_ldo5"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + slg51000_a_ldo6: ldo6 { > + regulator-name = "slg51000_a_ldo6"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + slg51000_a_ldo7: ldo7 { > + regulator-name = "slg51000_a_ldo7"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3750000>; > + }; > + }; > + }; > +}; > + > +&i2c_master_hub_0 { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <1000000>; > + status = "okay"; > + > + /* NXP NFC @ 28 */ > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + > + /* LX Semi SW82907 touchscreen @ 28 */ > +}; > + > +&i2c10 { > + clock-frequency = <1000000>; > + status = "okay"; > + > + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ > +}; > + > +&i2c11 { > + clock-frequency = <1000000>; > + status = "okay"; > + > + cs35l41_l: speaker-amp@30 { > + compatible = "cirrus,cs35l45"; > + reg = <0x30>; > + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; > + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | > CS35L45_ASP_TX_HIZ_DISABLED)>; > + #sound-dai-cells = <1>; > + > + cirrus,gpio-ctrl2 { > + gpio-ctrl = <0x2>; > + }; > + }; > + > + cs35l41_r: speaker-amp@31 { > + compatible = "cirrus,cs35l45"; > + reg = <0x31>; > + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; > + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | > CS35L45_ASP_TX_HIZ_DISABLED)>; > + #sound-dai-cells = <1>; > + > + cirrus,gpio-ctrl2 { > + gpio-ctrl = <0x2>; > + }; > + }; > +}; > + > +&pcie0 { > + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; > + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; > + > + pinctrl-0 = <&pcie0_default_state>; > + pinctrl-names = "default"; > + > + status = "okay"; > +}; > + > +&pcie0_phy { > + vdda-phy-supply = <&pm8550vs_2_l1>; > + vdda-pll-supply = <&pm8550vs_2_l3>; > + > + status = "okay"; > +}; > + > +&pm8550_flash { > + status = "okay"; > + > + led-0 { > + function = LED_FUNCTION_FLASH; > + color = <LED_COLOR_ID_WHITE>; > + led-sources = <1>, <4>; > + led-max-microamp = <500000>; > + flash-max-microamp = <1000000>; > + flash-max-timeout-us = <1280000>; > + function-enumerator = <0>; > + }; > + > + led-1 { > + function = LED_FUNCTION_FLASH; > + color = <LED_COLOR_ID_YELLOW>; > + led-sources = <2>, <3>; > + led-max-microamp = <500000>; > + flash-max-microamp = <1000000>; > + flash-max-timeout-us = <1280000>; > + function-enumerator = <1>; > + }; > +}; > + > +&pm8550_gpios { > + vol_down_n: volume-down-n-state { > + pins = "gpio6"; > + function = "normal"; > + power-source = <1>; > + bias-pull-up; > + input-enable; > + }; > + > + sdc2_card_det_n: sd-card-det-n-state { > + pins = "gpio12"; > + function = "normal"; > + power-source = <1>; > + bias-pull-down; > + output-disable; > + input-enable; > + }; > +}; > + > +&pm8550b_gpios { > + snapshot_n: snapshot-n-state { > + pins = "gpio7"; > + function = "normal"; > + power-source = <1>; > + bias-pull-up; > + input-enable; > + }; > + > + focus_n: focus-n-state { > + pins = "gpio8"; > + function = "normal"; > + power-source = <1>; > + bias-pull-up; > + input-enable; > + }; > +}; > + > +&pm8550vs_g_gpios { > + cam_pwr_a_cs: cam-pwr-a-cs-state { > + pins = "gpio4"; > + function = "normal"; > + power-source = <0x01>; > + drive-push-pull; > + output-low; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; > + }; > +}; > + > +&pm8550b_eusb2_repeater { > + qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>; > + qcom,tune-usb2-amplitude = /bits/ 8 <0xf>; > + qcom,tune-usb2-preem = /bits/ 8 <0x7>; > + vdd18-supply = <&pm8550_l15>; > + vdd3-supply = <&pm8550_l5>; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = <KEY_VOLUMEUP>; > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn", > + "qcom/sm8550/Sony/yodo/adsp_dtb.mbn"; > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn", > + "qcom/sm8550/Sony/yodo/cdsp_dtb.mbn"; > + status = "okay"; > +}; > + > +&sdhc_2 { > + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; > + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; > + pinctrl-names = "default", "sleep"; > + vmmc-supply = <&pm8550_l9>; > + vqmmc-supply = <&pm8550_l8>; > + no-sdio; > + no-mmc; > + status = "okay"; > +}; > + > +&sleep_clk { > + clock-frequency = <32000>; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <32 8>; > +}; > + > +&uart7 { > + status = "okay"; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "otg"; > + usb-role-switch; > +}; > + > +&usb_1_dwc3_hs { > + remote-endpoint = <&pmic_glink_hs_in>; > +}; > + > +&usb_1_dwc3_ss { > + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; > +}; > + > +&usb_1_hsphy { > + vdd-supply = <&pm8550vs_2_l1>; > + vdda12-supply = <&pm8550vs_2_l3>; > + phys = <&pm8550b_eusb2_repeater>; > + > + status = "okay"; > +}; > + > +&usb_dp_qmpphy { > + vdda-phy-supply = <&pm8550vs_2_l3>; > + vdda-pll-supply = <&pm8550ve_l3>; > + orientation-switch; > + > + status = "okay"; > +}; > + > +&usb_dp_qmpphy_out { > + remote-endpoint = <&pmic_glink_ss_in>; > +}; > + > +&usb_dp_qmpphy_usb_ss_in { > + remote-endpoint = <&usb_1_dwc3_ss>; > +}; > + > +&xo_board { > + clock-frequency = <76800000>; > +};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f7c5662213e4..9bbea531660d 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -237,6 +237,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-sony-xperia-yodo-pdx234.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts new file mode 100644 index 000000000000..85e0d3d66e16 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/cs35l45.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 5 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +/* TODO: Only one SID of PMR735D seems accessible? */ + +/delete-node/ &hwfence_shbuf; +/delete-node/ &mpss_mem; +/delete-node/ &rmtfs_mem; +/ { + model = "Sony Xperia 1 V"; + compatible = "sony,pdx234", "qcom,sm8550"; + chassis-type = "handset"; + + aliases { + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c16 = &i2c_hub_2; + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + pinctrl-names = "default"; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8550b_gpios 8 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8550b_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; + }; + + reserved-memory { + mpss_mem: mpss-region@89800000 { + reg = <0x0 0x89800000 0x0 0x10800000>; + no-map; + }; + + splash@b8000000 { + reg = <0x0 0xb8000000 0x0 0x2b00000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf-region@e6440000 { + reg = <0x0 0xe6440000 0x0 0x2dd000>; + no-map; + }; + + rmtfs_mem: memory@f8b00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf8b00000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + + ramoops@ffd00000 { + compatible = "ramoops"; + reg = <0x0 0xffd00000 0x0 0xc0000>; + console-size = <0x40000>; + record-size = <0x1000>; + pmsg-size = <0x40000>; + ecc-size = <16>; + }; + + rdtag-store-region@ffdc0000 { + reg = <0x0 0xffdc0000 0x0 0x40000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + pm8550_bob1: bob1 { + regulator-name = "pm8550_bob1"; + regulator-min-microvolt = <3416000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* TODO: bob2 @ 2.704-3.008V doesn't fall into the vreg driver constraints */ + + pm8550_l1: ldo1 { + regulator-name = "pm8550_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l2: ldo2 { + regulator-name = "pm8550_l2"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 exists in cmd-db, but the board seems to crash on access */ + + pm8550_l5: ldo5 { + regulator-name = "pm8550_l5"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l6: ldo6 { + regulator-name = "pm8550_l6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l7: ldo7 { + regulator-name = "pm8550_l7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l8: ldo8 { + regulator-name = "pm8550_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l9: ldo9 { + regulator-name = "pm8550_l9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l10: ldo10 { + regulator-name = "pm8550_l10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l11: ldo11 { + regulator-name = "pm8550_l11"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l12: ldo12 { + regulator-name = "pm8550_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l13: ldo13 { + regulator-name = "pm8550_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l14: ldo14 { + regulator-name = "pm8550_l14"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l15: ldo15 { + regulator-name = "pm8550_l15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l16: ldo16 { + regulator-name = "pm8550_l16"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550_l17: ldo17 { + regulator-name = "pm8550_l17"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + pm8550vs_0_l1: ldo1 { + regulator-name = "pm8550vs_0_l1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_0_l3: ldo3 { + regulator-name = "pm8550vs_0_l3"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + pm8550vs_1_l1: ldo1 { + regulator-name = "pm8550vs_1_l1"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 exists in cmd-db, but the board seems to crash on access */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + pm8550vs_2_s4: smps4 { + regulator-name = "pm8550vs_2_s4"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_s5: smps5 { + regulator-name = "pm8550vs_2_s5"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_l1: ldo1 { + regulator-name = "pm8550vs_2_l1"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_l2: ldo2 { + regulator-name = "pm8550vs_2_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_2_l3: ldo3 { + regulator-name = "pm8550vs_2_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + pm8550ve_s4: smps4 { + regulator-name = "pm8550ve_s4"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550ve_l1: ldo1 { + regulator-name = "pm8550ve_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550ve_l2: ldo2 { + regulator-name = "pm8550ve_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550ve_l3: ldo3 { + regulator-name = "pm8550ve_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + pm8550vs_3_s1: smps1 { + regulator-name = "pm8550vs_3_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s2: smps2 { + regulator-name = "pm8550vs_3_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s3: smps3 { + regulator-name = "pm8550vs_3_s3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s4: smps4 { + regulator-name = "pm8550vs_3_s4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s5: smps5 { + regulator-name = "pm8550vs_3_s5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_s6: smps6 { + regulator-name = "pm8550vs_3_s6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_l1: ldo1 { + regulator-name = "pm8550vs_3_l1"; + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_l2: ldo2 { + regulator-name = "pm8550vs_3_l2"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8550vs_3_l3: ldo3 { + regulator-name = "pm8550vs_3_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* TODO: Unknown PMIC @ k, l, PM8010 @ m, n */ +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&i2c_hub_2 { + clock-frequency = <400000>; + status = "okay"; + + pmic@75 { + compatible = "dlg,slg51000"; + reg = <0x75>; + dlg,cs-gpios = <&pm8550vs_g_gpios 4 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&cam_pwr_a_cs>; + pinctrl-names = "default"; + + regulators { + slg51000_a_ldo1: ldo1 { + regulator-name = "slg51000_a_ldo1"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo2: ldo2 { + regulator-name = "slg51000_a_ldo2"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + slg51000_a_ldo3: ldo3 { + regulator-name = "slg51000_a_ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo4: ldo4 { + regulator-name = "slg51000_a_ldo4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + + slg51000_a_ldo5: ldo5 { + regulator-name = "slg51000_a_ldo5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo6: ldo6 { + regulator-name = "slg51000_a_ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1200000>; + }; + + slg51000_a_ldo7: ldo7 { + regulator-name = "slg51000_a_ldo7"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + }; + }; + }; +}; + +&i2c_master_hub_0 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <1000000>; + status = "okay"; + + /* NXP NFC @ 28 */ +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* LX Semi SW82907 touchscreen @ 28 */ +}; + +&i2c10 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&i2c11 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@30 { + compatible = "cirrus,cs35l45"; + reg = <0x30>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; + #sound-dai-cells = <1>; + + cirrus,gpio-ctrl2 { + gpio-ctrl = <0x2>; + }; + }; + + cs35l41_r: speaker-amp@31 { + compatible = "cirrus,cs35l45"; + reg = <0x31>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED | CS35L45_ASP_TX_HIZ_DISABLED)>; + #sound-dai-cells = <1>; + + cirrus,gpio-ctrl2 { + gpio-ctrl = <0x2>; + }; + }; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8550vs_2_l1>; + vdda-pll-supply = <&pm8550vs_2_l3>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <1000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + vol_down_n: volume-down-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio12"; + function = "normal"; + power-source = <1>; + bias-pull-down; + output-disable; + input-enable; + }; +}; + +&pm8550b_gpios { + snapshot_n: snapshot-n-state { + pins = "gpio7"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio8"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm8550vs_g_gpios { + cam_pwr_a_cs: cam-pwr-a-cs-state { + pins = "gpio4"; + function = "normal"; + power-source = <0x01>; + drive-push-pull; + output-low; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; +}; + +&pm8550b_eusb2_repeater { + qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>; + qcom,tune-usb2-amplitude = /bits/ 8 <0xf>; + qcom,tune-usb2-preem = /bits/ 8 <0x7>; + vdd18-supply = <&pm8550_l15>; + vdd3-supply = <&pm8550_l5>; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/Sony/yodo/adsp.mbn", + "qcom/sm8550/Sony/yodo/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/Sony/yodo/cdsp.mbn", + "qcom/sm8550/Sony/yodo/cdsp_dtb.mbn"; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&pm8550_l9>; + vqmmc-supply = <&pm8550_l8>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&pm8550vs_2_l1>; + vdda12-supply = <&pm8550vs_2_l3>; + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&pm8550vs_2_l3>; + vdda-pll-supply = <&pm8550ve_l3>; + orientation-switch; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + +&xo_board { + clock-frequency = <76800000>; +};
Add support for Sony Xperia 1 V, a.k.a PDX234. This device is a part of the SoMC SM8550 Yodo platform. This commit brings support for: * Remoteprocs (sans modem for now) * Flash LED (the notification LED is gone :((((() * SD Card * USB (*including SuperSpeed*) + PMIC_GLINK (it's funky, requires a replug with an cable flip sometimes..) * Most regulators * Part of I2C-connected peripherals (notably no touch due to a driver bug) * PCIe0 (PCIe1 is unused) Do note display via simplefb is not supported, as the display is blanked upon exiting XBL. To create a working boot image, you need to run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8550-sony-xperia-\ yodo-pdx234.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 2 \ -o boot.img-sony-xperia-pdx234 Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess: // You have to either pull vbmeta{"","_system"} from // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img fastboot --disable-verity --disable-verification flash vbmeta_system \ vbmeta_system.img fastboot flash boot boot.img-sony-xperia-pdx234 fastboot erase vendor_boot fastboot erase recovery fastboot flash dtbo emptydtbo.img fastboot erase init_boot // ? I don't remember if it's necessary, sorry fastboot continue Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/sm8550-sony-xperia-yodo-pdx234.dts | 779 +++++++++++++++++++++ 2 files changed, 780 insertions(+)