diff mbox series

[PULL,29/45] hw/arm: Add GPIO and SD to BCM2838 periph

Message ID 20240227133314.1721857-30-peter.maydell@linaro.org
State Not Applicable
Headers show
Series [PULL,01/45] hw/arm/sbsa-ref: Simplify init since PCIe is always enabled | expand

Commit Message

Peter Maydell Feb. 27, 2024, 1:32 p.m. UTC
From: Sergey Kambalin <serg.oker@gmail.com>

Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240226000259.2752893-10-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/bcm2838_peripherals.h |   8 ++
 hw/arm/bcm2838_peripherals.c         | 143 +++++++++++++++++++++++++++
 2 files changed, 151 insertions(+)
diff mbox series

Patch

diff --git a/include/hw/arm/bcm2838_peripherals.h b/include/hw/arm/bcm2838_peripherals.h
index d07831753ab..86b0d96944e 100644
--- a/include/hw/arm/bcm2838_peripherals.h
+++ b/include/hw/arm/bcm2838_peripherals.h
@@ -10,6 +10,8 @@ 
 #define BCM2838_PERIPHERALS_H
 
 #include "hw/arm/bcm2835_peripherals.h"
+#include "hw/sd/sdhci.h"
+#include "hw/gpio/bcm2838_gpio.h"
 
 /* SPI */
 #define GIC_SPI_INTERRUPT_MBOX         33
@@ -45,6 +47,9 @@ 
 #define GPU_INTERRUPT_DMA14     28
 #define GPU_INTERRUPT_DMA15     31
 
+#define BCM2838_MPHI_OFFSET     0xb200
+#define BCM2838_MPHI_SIZE       0x200
+
 #define TYPE_BCM2838_PERIPHERALS "bcm2838-peripherals"
 OBJECT_DECLARE_TYPE(BCM2838PeripheralState, BCM2838PeripheralClass,
                     BCM2838_PERIPHERALS)
@@ -58,6 +63,9 @@  struct BCM2838PeripheralState {
     MemoryRegion peri_low_mr_alias;
     MemoryRegion mphi_mr_alias;
 
+    SDHCIState emmc2;
+    BCM2838GpioState gpio;
+
     OrIRQState mmc_irq_orgate;
     OrIRQState dma_7_8_irq_orgate;
     OrIRQState dma_9_10_irq_orgate;
diff --git a/hw/arm/bcm2838_peripherals.c b/hw/arm/bcm2838_peripherals.c
index 06110c724f8..55ae56733f4 100644
--- a/hw/arm/bcm2838_peripherals.c
+++ b/hw/arm/bcm2838_peripherals.c
@@ -15,22 +15,56 @@ 
 /* Lower peripheral base address on the VC (GPU) system bus */
 #define BCM2838_VC_PERI_LOW_BASE 0x7c000000
 
+/* Capabilities for SD controller: no DMA, high-speed, default clocks etc. */
+#define BCM2835_SDHC_CAPAREG 0x52134b4
+
 static void bcm2838_peripherals_init(Object *obj)
 {
     BCM2838PeripheralState *s = BCM2838_PERIPHERALS(obj);
     BCM2838PeripheralClass *bc = BCM2838_PERIPHERALS_GET_CLASS(obj);
+    BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(obj);
 
     /* Lower memory region for peripheral devices (exported to the Soc) */
     memory_region_init(&s->peri_low_mr, obj, "bcm2838-peripherals",
                        bc->peri_low_size);
     sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->peri_low_mr);
 
+    /* Extended Mass Media Controller 2 */
+    object_initialize_child(obj, "emmc2", &s->emmc2, TYPE_SYSBUS_SDHCI);
+
+    /* GPIO */
+    object_initialize_child(obj, "gpio", &s->gpio, TYPE_BCM2838_GPIO);
+
+    object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhci",
+                                   OBJECT(&s_base->sdhci.sdbus));
+    object_property_add_const_link(OBJECT(&s->gpio), "sdbus-sdhost",
+                                   OBJECT(&s_base->sdhost.sdbus));
+
+    object_initialize_child(obj, "mmc_irq_orgate", &s->mmc_irq_orgate,
+                            TYPE_OR_IRQ);
+    object_property_set_int(OBJECT(&s->mmc_irq_orgate), "num-lines", 2,
+                            &error_abort);
+
+    object_initialize_child(obj, "dma_7_8_irq_orgate", &s->dma_7_8_irq_orgate,
+                            TYPE_OR_IRQ);
+    object_property_set_int(OBJECT(&s->dma_7_8_irq_orgate), "num-lines", 2,
+                            &error_abort);
+
+    object_initialize_child(obj, "dma_9_10_irq_orgate", &s->dma_9_10_irq_orgate,
+                            TYPE_OR_IRQ);
+    object_property_set_int(OBJECT(&s->dma_9_10_irq_orgate), "num-lines", 2,
+                            &error_abort);
 }
 
 static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
 {
+    DeviceState *mmc_irq_orgate;
+    DeviceState *dma_7_8_irq_orgate;
+    DeviceState *dma_9_10_irq_orgate;
+    MemoryRegion *mphi_mr;
     BCM2838PeripheralState *s = BCM2838_PERIPHERALS(dev);
     BCMSocPeripheralBaseState *s_base = BCM_SOC_PERIPHERALS_BASE(dev);
+    int n;
 
     bcm_soc_peripherals_common_realize(dev, errp);
 
@@ -42,6 +76,115 @@  static void bcm2838_peripherals_realize(DeviceState *dev, Error **errp)
                                         BCM2838_VC_PERI_LOW_BASE,
                                         &s->peri_low_mr_alias, 1);
 
+    /* Extended Mass Media Controller 2 */
+    object_property_set_uint(OBJECT(&s->emmc2), "sd-spec-version", 3,
+                             &error_abort);
+    object_property_set_uint(OBJECT(&s->emmc2), "capareg",
+                             BCM2835_SDHC_CAPAREG, &error_abort);
+    object_property_set_bool(OBJECT(&s->emmc2), "pending-insert-quirk", true,
+                             &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc2), errp)) {
+        return;
+    }
+
+    memory_region_add_subregion(&s_base->peri_mr, EMMC2_OFFSET,
+                                sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->emmc2),
+                                0));
+
+    /* According to DTS, EMMC and EMMC2 share one irq */
+    if (!qdev_realize(DEVICE(&s->mmc_irq_orgate), NULL, errp)) {
+        return;
+    }
+
+    mmc_irq_orgate = DEVICE(&s->mmc_irq_orgate);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc2), 0,
+                       qdev_get_gpio_in(mmc_irq_orgate, 0));
+
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->sdhci), 0,
+                       qdev_get_gpio_in(mmc_irq_orgate, 1));
+
+   /* Connect EMMC and EMMC2 to the interrupt controller */
+    qdev_connect_gpio_out(mmc_irq_orgate, 0,
+                          qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+                                                 BCM2835_IC_GPU_IRQ,
+                                                 INTERRUPT_ARASANSDIO));
+
+    /* Connect DMA 0-6 to the interrupt controller */
+    for (n = 0; n < 7; n++) {
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), n,
+                           qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+                                                  BCM2835_IC_GPU_IRQ,
+                                                  GPU_INTERRUPT_DMA0 + n));
+    }
+
+   /* According to DTS, DMA 7 and 8 share one irq */
+    if (!qdev_realize(DEVICE(&s->dma_7_8_irq_orgate), NULL, errp)) {
+        return;
+    }
+    dma_7_8_irq_orgate = DEVICE(&s->dma_7_8_irq_orgate);
+
+    /* Connect DMA 7-8 to the interrupt controller */
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 7,
+                       qdev_get_gpio_in(dma_7_8_irq_orgate, 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 8,
+                       qdev_get_gpio_in(dma_7_8_irq_orgate, 1));
+
+    qdev_connect_gpio_out(dma_7_8_irq_orgate, 0,
+                          qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+                                                 BCM2835_IC_GPU_IRQ,
+                                                 GPU_INTERRUPT_DMA7_8));
+
+     /* According to DTS, DMA 9 and 10 share one irq */
+    if (!qdev_realize(DEVICE(&s->dma_9_10_irq_orgate), NULL, errp)) {
+        return;
+    }
+    dma_9_10_irq_orgate = DEVICE(&s->dma_9_10_irq_orgate);
+
+   /* Connect DMA 9-10 to the interrupt controller */
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 9,
+                       qdev_get_gpio_in(dma_9_10_irq_orgate, 0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 10,
+                       qdev_get_gpio_in(dma_9_10_irq_orgate, 1));
+
+    qdev_connect_gpio_out(dma_9_10_irq_orgate, 0,
+                          qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+                                                 BCM2835_IC_GPU_IRQ,
+                                                 GPU_INTERRUPT_DMA9_10));
+
+    /* Connect DMA 11-14 to the interrupt controller */
+    for (n = 11; n < 15; n++) {
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), n,
+                           qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+                                                  BCM2835_IC_GPU_IRQ,
+                                                  GPU_INTERRUPT_DMA11 + n
+                                                  - 11));
+    }
+
+    /*
+     * Connect DMA 15 to the interrupt controller, it is physically removed
+     * from other DMA channels and exclusively used by the GPU
+     */
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s_base->dma), 15,
+                        qdev_get_gpio_in_named(DEVICE(&s_base->ic),
+                                               BCM2835_IC_GPU_IRQ,
+                                               GPU_INTERRUPT_DMA15));
+
+    /* Map MPHI to BCM2838 memory map */
+    mphi_mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s_base->mphi), 0);
+    memory_region_init_alias(&s->mphi_mr_alias, OBJECT(s), "mphi", mphi_mr, 0,
+                             BCM2838_MPHI_SIZE);
+    memory_region_add_subregion(&s_base->peri_mr, BCM2838_MPHI_OFFSET,
+                                &s->mphi_mr_alias);
+
+    /* GPIO */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
+        return;
+    }
+    memory_region_add_subregion(
+        &s_base->peri_mr, GPIO_OFFSET,
+        sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0));
+
+    object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->gpio), "sd-bus");
 }
 
 static void bcm2838_peripherals_class_init(ObjectClass *oc, void *data)