diff mbox series

arm64: dts: qcom: ipq8074: Add QUP UART6 node

Message ID 20240229205426.232205-1-frut3k7@gmail.com
State New
Headers show
Series arm64: dts: qcom: ipq8074: Add QUP UART6 node | expand

Commit Message

Paweł Owoc Feb. 29, 2024, 8:54 p.m. UTC 
Add node to support the QUP UART6 controller inside of IPQ8074.
Used by some routers to communicate with a Bluetooth controller.

Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

Comments

Bjorn Andersson March 19, 2024, 2:48 a.m. UTC | #1 
On Thu, 29 Feb 2024 21:54:16 +0100, Paweł Owoc wrote:
> Add node to support the QUP UART6 controller inside of IPQ8074.
> Used by some routers to communicate with a Bluetooth controller.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: ipq8074: Add QUP UART6 node
      commit: 08429b4ef46080c79534c4eee427ee2e6012877c

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 26441447c866..9c259257adb0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -321,6 +321,13 @@  serial_4_pins: serial4-state {
 				bias-disable;
 			};
 
+			serial_5_pins: serial5-state {
+				pins = "gpio9", "gpio16";
+				function = "blsp5_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
 			i2c_0_pins: i2c-0-state {
 				pins = "gpio42", "gpio43";
 				function = "blsp1_i2c";
@@ -469,6 +476,18 @@  blsp1_uart5: serial@78b3000 {
 			status = "disabled";
 		};
 
+		blsp1_uart6: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b4000 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-0 = <&serial_5_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;