diff mbox series

[v2,6/7] mpi3mr: Update MPI Headers to revision 31

Message ID 20240307150825.7613-7-ranjan.kumar@broadcom.com
State Superseded
Headers show
Series mpi3mr: Few Enhancements and minor fixes | expand

Commit Message

Ranjan Kumar March 7, 2024, 3:08 p.m. UTC
Update MPI Headers to revision 31

Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
---
 drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h      |  3 +++
 drivers/scsi/mpi3mr/mpi/mpi30_image.h     | 20 +++++---------------
 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h       | 18 +++++++++++-------
 drivers/scsi/mpi3mr/mpi/mpi30_transport.h |  2 +-
 drivers/scsi/mpi3mr/mpi3mr_fw.c           |  8 ++++----
 5 files changed, 24 insertions(+), 27 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
index 35f81af40f51..6a19e17eb1a7 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_cnfg.h
@@ -309,6 +309,7 @@  struct mpi3_man6_gpio_entry {
 #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_GENERIC                     (0x00)
 #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_CABLE_MGMT                  (0x10)
 #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_SOURCE_ACTIVE_CABLE_OVERCURRENT    (0x20)
+#define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_ACK_REQUIRED                       (0x02)
 #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_MASK                       (0x01)
 #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_EDGE                       (0x00)
 #define MPI3_MAN6_GPIO_EXTINT_PARAM1_FLAGS_TRIGGER_LEVEL                      (0x01)
@@ -1315,6 +1316,8 @@  struct mpi3_driver_page0 {
 	__le32                             reserved18;
 };
 #define MPI3_DRIVER0_PAGEVERSION               (0x00)
+#define MPI3_DRIVER0_BSDOPTS_DEVICEEXPOSURE_DISABLE	    (0x00000020)
+#define MPI3_DRIVER0_BSDOPTS_WRITECACHE_DISABLE		    (0x00000010)
 #define MPI3_DRIVER0_BSDOPTS_HEADLESS_MODE_ENABLE           (0x00000008)
 #define MPI3_DRIVER0_BSDOPTS_DIS_HII_CONFIG_UTIL            (0x00000004)
 #define MPI3_DRIVER0_BSDOPTS_REGISTRATION_MASK              (0x00000003)
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
index 47035b811902..7df242190135 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_image.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
@@ -198,16 +198,17 @@  struct mpi3_supported_devices_data {
 	struct mpi3_supported_device   supported_device[MPI3_SUPPORTED_DEVICE_MAX];
 };
 
-#ifndef MPI3_ENCRYPTED_HASH_MAX
-#define MPI3_ENCRYPTED_HASH_MAX                      (1)
+#ifndef MPI3_PUBLIC_KEY_MAX
+#define MPI3_PUBLIC_KEY_MAX                      (1)
 #endif
 struct mpi3_encrypted_hash_entry {
 	u8                         hash_image_type;
 	u8                         hash_algorithm;
 	u8                         encryption_algorithm;
 	u8                         reserved03;
-	__le32                     reserved04;
-	__le32                     encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
+	__le16                     public_key_size;
+	__le16                     signature_size;
+	__le32                     public_key[MPI3_PUBLIC_KEY_MAX];
 };
 
 #define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE      (0x03)
@@ -228,17 +229,6 @@  struct mpi3_encrypted_hash_entry {
 #define MPI3_ENCRYPTION_ALGORITHM_RSA2048            (0x04)
 #define MPI3_ENCRYPTION_ALGORITHM_RSA4096            (0x05)
 #define MPI3_ENCRYPTION_ALGORITHM_RSA3072            (0x06)
-#ifndef MPI3_PUBLIC_KEY_MAX
-#define MPI3_PUBLIC_KEY_MAX                          (1)
-#endif
-struct mpi3_encrypted_key_with_hash_entry {
-	u8                         hash_image_type;
-	u8                         hash_algorithm;
-	u8                         encryption_algorithm;
-	u8                         reserved03;
-	__le32                     reserved04;
-	__le32                     public_key[MPI3_PUBLIC_KEY_MAX];
-};
 
 #ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX
 #define MPI3_ENCRYPTED_HASH_ENTRY_MAX               (1)
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
index 85b91583bacf..028784949873 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
@@ -101,6 +101,8 @@  struct mpi3_ioc_facts_data {
 	__le16                     max_io_throttle_group;
 	__le16                     io_throttle_low;
 	__le16                     io_throttle_high;
+	__le32			   diag_fdl_size;
+	__le32			   diag_tty_size;
 };
 #define MPI3_IOCFACTS_CAPABILITY_NON_SUPERVISOR_MASK          (0x80000000)
 #define MPI3_IOCFACTS_CAPABILITY_SUPERVISOR_IOC               (0x00000000)
@@ -108,13 +110,13 @@  struct mpi3_ioc_facts_data {
 #define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_MASK            (0x00000600)
 #define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_FIXED_THRESHOLD (0x00000000)
 #define MPI3_IOCFACTS_CAPABILITY_INT_COALESCE_OUTSTANDING_IO  (0x00000200)
-#define MPI3_IOCFACTS_CAPABILITY_COMPLETE_RESET_CAPABLE       (0x00000100)
-#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_ENABLED       (0x00000080)
-#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_FW_ENABLED          (0x00000040)
-#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_DRIVER_ENABLED      (0x00000020)
-#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD_ENABLED     (0x00000010)
-#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE                 (0x00000008)
-#define MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED            (0x00000002)
+#define MPI3_IOCFACTS_CAPABILITY_COMPLETE_RESET_SUPPORTED     (0x00000100)
+#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_TRACE_SUPPORTED     (0x00000080)
+#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_FW_SUPPORTED        (0x00000040)
+#define MPI3_IOCFACTS_CAPABILITY_SEG_DIAG_DRIVER_SUPPORTED    (0x00000020)
+#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD_SUPPORTED   (0x00000010)
+#define MPI3_IOCFACTS_CAPABILITY_RAID_SUPPORTED               (0x00000008)
+#define MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED          (0x00000002)
 #define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_SUPPORTED      (0x00000001)
 #define MPI3_IOCFACTS_PID_TYPE_MASK                           (0xf000)
 #define MPI3_IOCFACTS_PID_TYPE_SHIFT                          (12)
@@ -159,6 +161,8 @@  struct mpi3_ioc_facts_data {
 #define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR              (0x00000002)
 #define MPI3_IOCFACTS_IO_THROTTLE_DATA_LENGTH_NOT_REQUIRED    (0x0000)
 #define MPI3_IOCFACTS_MAX_IO_THROTTLE_GROUP_NOT_REQUIRED      (0x0000)
+#define MPI3_IOCFACTS_DIAGFDLSIZE_NOT_SUPPORTED		      (0x00000000)
+#define MPI3_IOCFACTS_DIAGTTYSIZE_NOT_SUPPORTED               (0x00000000)
 struct mpi3_mgmt_passthrough_request {
 	__le16                 host_tag;
 	u8                     ioc_use_only02;
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
index 1e0a3dcaf723..fdc3d1968e43 100644
--- a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
@@ -18,7 +18,7 @@  union mpi3_version_union {
 
 #define MPI3_VERSION_MAJOR                                              (3)
 #define MPI3_VERSION_MINOR                                              (0)
-#define MPI3_VERSION_UNIT                                               (28)
+#define MPI3_VERSION_UNIT                                               (31)
 #define MPI3_VERSION_DEV                                                (0)
 #define MPI3_DEVHANDLE_INVALID                                          (0xffff)
 struct mpi3_sysif_oper_queue_indexes {
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 07accf01be0f..0f102ba49759 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1280,7 +1280,7 @@  mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc)
 			    mrioc->shost->max_sectors * 512, mrioc->facts.max_data_length);
 
 	if ((mrioc->sas_transport_enabled) && (mrioc->facts.ioc_capabilities &
-	    MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED))
+	    MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED))
 		ioc_err(mrioc,
 		    "critical error: multipath capability is enabled at the\n"
 		    "\tcontroller while sas transport support is enabled at the\n"
@@ -3677,8 +3677,8 @@  static const struct {
 	u32 capability;
 	char *name;
 } mpi3mr_capabilities[] = {
-	{ MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE, "RAID" },
-	{ MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED, "MultiPath" },
+	{ MPI3_IOCFACTS_CAPABILITY_RAID_SUPPORTED, "RAID" },
+	{ MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED, "MultiPath" },
 };
 
 /**
@@ -3960,7 +3960,7 @@  int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
 		    MPI3MR_HOST_IOS_KDUMP);
 
 	if (!(mrioc->facts.ioc_capabilities &
-	    MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED)) {
+	    MPI3_IOCFACTS_CAPABILITY_MULTIPATH_SUPPORTED)) {
 		mrioc->sas_transport_enabled = 1;
 		mrioc->scsi_device_channel = 1;
 		mrioc->shost->max_channel = 1;