diff mbox series

arm64: dts: exynos: gs101: define all PERIC USI nodes

Message ID 20240307135912.163996-1-tudor.ambarus@linaro.org
State New
Headers show
Series arm64: dts: exynos: gs101: define all PERIC USI nodes | expand

Commit Message

Tudor Ambarus March 7, 2024, 1:59 p.m. UTC 
Universal Serial Interface (USI) supports three types of serial
interface such as UART, SPI and I2C. Each protocol works independently.
USI can be configured to work as one of these protocols. Define all the
USI nodes from the PERIC blocks (USI0-14), in all their possible
configurations. These blocks have the TX/RX FIFO depth of 64 bytes.

Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
Please note that:
- google,gs101-spi compatible was queued through the SPI tree:
  https://lore.kernel.org/linux-arm-kernel/170742731537.2266792.3851016361229293846.b4-ty@kernel.org/
- SPI dma properties were marked as not requiered. Queued through the
  SPI tree:
  https://lore.kernel.org/linux-spi/170967132774.228925.1759895846287455970.b4-ty@kernel.org/

 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 782 +++++++++++++++++++
 1 file changed, 782 insertions(+)

Comments

Krzysztof Kozlowski March 8, 2024, 4:45 p.m. UTC | #1 
On 07/03/2024 14:59, Tudor Ambarus wrote:
> Universal Serial Interface (USI) supports three types of serial
> interface such as UART, SPI and I2C. Each protocol works independently.
> USI can be configured to work as one of these protocols. Define all the
> USI nodes from the PERIC blocks (USI0-14), in all their possible
> configurations. These blocks have the TX/RX FIFO depth of 64 bytes.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> ---
> Please note that:
> - google,gs101-spi compatible was queued through the SPI tree:
>   https://lore.kernel.org/linux-arm-kernel/170742731537.2266792.3851016361229293846.b4-ty@kernel.org/
> - SPI dma properties were marked as not requiered. Queued through the
>   SPI tree:
>   https://lore.kernel.org/linux-spi/170967132774.228925.1759895846287455970.b4-ty@kernel.org/
> 
>  arch/arm64/boot/dts/exynos/google/gs101.dtsi | 782 +++++++++++++++++++
>  1 file changed, 782 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> index ee65ed9d2cfc..d7ecfbc7e440 100644
> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -373,6 +373,398 @@ pinctrl_peric0: pinctrl@10840000 {
>  			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
>  		};
>  
> +		usi1: usi@109000c0 {
> +			compatible = "google,gs101-usi",
> +				     "samsung,exynos850-usi";

This should fit within 81 characters, which is pretty close to 80, so if
there is going to be any resend/new version, please join the lines.

> +			reg = <0x109000c0 0x20>;
> +			ranges;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
> +				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
> +			clock-names = "pclk", "ipclk";
> +			samsung,sysreg = <&sysreg_peric0 0x1000>;
> +			status = "disabled";
> +
> +			hsi2c_1: i2c@10900000 {
> +				compatible = "google,gs101-hsi2c",
> +					     "samsung,exynosautov9-hsi2c";
> +				reg = <0x10900000 0xc0>;
> +				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;

I wonder why we use four cells in GIC...

> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&hsi2c1_bus>;

Please reverse two lines, first pinctrl-0 then pinctrl-names. I know we
did not follow this convention till now, but at least new code can be
correct. Also clocks should be before pinctrl, so we keep some sort of
alphabetical order.

It is anyway too late in the cycle for me to pick it up, so no need to
hurry with resend.

Best regards,
Krzysztof
Peter Griffin March 11, 2024, 10:47 a.m. UTC | #2 
Hi Krzysztof & Tudor,

On Fri, 8 Mar 2024 at 16:45, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 07/03/2024 14:59, Tudor Ambarus wrote:
> > Universal Serial Interface (USI) supports three types of serial
> > interface such as UART, SPI and I2C. Each protocol works independently.
> > USI can be configured to work as one of these protocols. Define all the
> > USI nodes from the PERIC blocks (USI0-14), in all their possible
> > configurations. These blocks have the TX/RX FIFO depth of 64 bytes.
> >
> > Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>

With Krzystof's comments addressed:

Reviewed-by: Peter Griffin <peter.griffin@linaro.org>

> > ---
> > Please note that:
> > - google,gs101-spi compatible was queued through the SPI tree:
> >   https://lore.kernel.org/linux-arm-kernel/170742731537.2266792.3851016361229293846.b4-ty@kernel.org/
> > - SPI dma properties were marked as not requiered. Queued through the
> >   SPI tree:
> >   https://lore.kernel.org/linux-spi/170967132774.228925.1759895846287455970.b4-ty@kernel.org/
> >
> >  arch/arm64/boot/dts/exynos/google/gs101.dtsi | 782 +++++++++++++++++++
> >  1 file changed, 782 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > index ee65ed9d2cfc..d7ecfbc7e440 100644
> > --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> > @@ -373,6 +373,398 @@ pinctrl_peric0: pinctrl@10840000 {
> >                       interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
> >               };
> >
> > +             usi1: usi@109000c0 {
> > +                     compatible = "google,gs101-usi",
> > +                                  "samsung,exynos850-usi";
>
> This should fit within 81 characters, which is pretty close to 80, so if
> there is going to be any resend/new version, please join the lines.
>
> > +                     reg = <0x109000c0 0x20>;
> > +                     ranges;
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +                     clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
> > +                              <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
> > +                     clock-names = "pclk", "ipclk";
> > +                     samsung,sysreg = <&sysreg_peric0 0x1000>;
> > +                     status = "disabled";
> > +
> > +                     hsi2c_1: i2c@10900000 {
> > +                             compatible = "google,gs101-hsi2c",
> > +                                          "samsung,exynosautov9-hsi2c";
> > +                             reg = <0x10900000 0xc0>;
> > +                             interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
>
> I wonder why we use four cells in GIC...

Due to the ppi-partitions defined in the gic for the pmu-(0-2) devices.

regards,

Peter.



>
> > +                             #address-cells = <1>;
> > +                             #size-cells = <0>;
> > +                             pinctrl-names = "default";
> > +                             pinctrl-0 = <&hsi2c1_bus>;
>
> Please reverse two lines, first pinctrl-0 then pinctrl-names. I know we
> did not follow this convention till now, but at least new code can be
> correct. Also clocks should be before pinctrl, so we keep some sort of
> alphabetical order.
>
> It is anyway too late in the cycle for me to pick it up, so no need to
> hurry with resend.
>
> Best regards,
> Krzysztof
>
Tudor Ambarus March 22, 2024, 1:39 p.m. UTC | #3 
Hi, Krzysztof!

On 3/8/24 16:45, Krzysztof Kozlowski wrote:
> On 07/03/2024 14:59, Tudor Ambarus wrote:
>> Universal Serial Interface (USI) supports three types of serial
>> interface such as UART, SPI and I2C. Each protocol works independently.
>> USI can be configured to work as one of these protocols. Define all the
>> USI nodes from the PERIC blocks (USI0-14), in all their possible
>> configurations. These blocks have the TX/RX FIFO depth of 64 bytes.
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>> ---
>> Please note that:
>> - google,gs101-spi compatible was queued through the SPI tree:
>>   https://lore.kernel.org/linux-arm-kernel/170742731537.2266792.3851016361229293846.b4-ty@kernel.org/
>> - SPI dma properties were marked as not requiered. Queued through the
>>   SPI tree:
>>   https://lore.kernel.org/linux-spi/170967132774.228925.1759895846287455970.b4-ty@kernel.org/
>>
>>  arch/arm64/boot/dts/exynos/google/gs101.dtsi | 782 +++++++++++++++++++
>>  1 file changed, 782 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
>> index ee65ed9d2cfc..d7ecfbc7e440 100644
>> --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
>> @@ -373,6 +373,398 @@ pinctrl_peric0: pinctrl@10840000 {

cut

>> +
>> +			hsi2c_1: i2c@10900000 {
>> +				compatible = "google,gs101-hsi2c",
>> +					     "samsung,exynosautov9-hsi2c";
>> +				reg = <0x10900000 0xc0>;
>> +				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
> 
> I wonder why we use four cells in GIC...
> 
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;

I'd like to respin this patch. Any preference on coding style for
#address-cells and #size-cells? I guess they shall be above ranges
property if present.

>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&hsi2c1_bus>;
> 
> Please reverse two lines, first pinctrl-0 then pinctrl-names. I know we

Ok.

> did not follow this convention till now, but at least new code can be
> correct. Also clocks should be before pinctrl, so we keep some sort of
> alphabetical order.

Ok.

I guess the order shall be:

1. compatible
2. reg
3. #address-cells (if applicable)
   #size-cells (if applicable)
4. ranges (if applicable)
5. Standard/common properties ordered alphabetically (ex. clocks,
   interrupts, pinctrl)
6. vendor-specific properties
7. status (if applicable)

Please let me know if you have other preference. Thanks!
ta
Krzysztof Kozlowski March 25, 2024, 8:22 a.m. UTC | #4 
On 22/03/2024 14:39, Tudor Ambarus wrote:
>>
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
> 
> I'd like to respin this patch. Any preference on coding style for
> #address-cells and #size-cells? I guess they shall be above ranges
> property if present.

No, ranges should be just after reg, because it encodes often the same
or similar information (see also DTS Coding Style). I don't have
guideline, can be anywhere before vendor properties.

> 
>>> +				pinctrl-names = "default";
>>> +				pinctrl-0 = <&hsi2c1_bus>;
>>
>> Please reverse two lines, first pinctrl-0 then pinctrl-names. I know we
> 
> Ok.
> 
>> did not follow this convention till now, but at least new code can be
>> correct. Also clocks should be before pinctrl, so we keep some sort of
>> alphabetical order.
> 
> Ok.
> 
> I guess the order shall be:
> 
> 1. compatible
> 2. reg

3. ranges

> 3. #address-cells (if applicable)
>    #size-cells (if applicable)

> 5. Standard/common properties ordered alphabetically (ex. clocks,
>    interrupts, pinctrl)
> 6. vendor-specific properties
> 7. status (if applicable)
> 

Rest looks fine, thanks.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index ee65ed9d2cfc..d7ecfbc7e440 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -373,6 +373,398 @@  pinctrl_peric0: pinctrl@10840000 {
 			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi1: usi@109000c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1000>;
+			status = "disabled";
+
+			hsi2c_1: i2c@10900000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c1_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_1: serial@10900000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_1: spi@10900000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10900000 0x30>;
+				interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@109100c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1004>;
+			status = "disabled";
+
+			hsi2c_2: i2c@10910000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c2_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_2: serial@10910000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10910000 0xc0>;
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@10910000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10910000 0x30>;
+				interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@109200c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1008>;
+			status = "disabled";
+
+			hsi2c_3: i2c@10920000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c3_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_3: serial@10920000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart3_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@10920000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10920000 0x30>;
+				interrupts = <GIC_SPI 637 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi4: usi@109300c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x100c>;
+			status = "disabled";
+
+			hsi2c_4: i2c@10930000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c4_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_4: serial@10930000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10930000 0xc0>;
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart4_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10930000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10930000 0x30>;
+				interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi4_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@109400c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1010>;
+			status = "disabled";
+
+			hsi2c_5: i2c@10940000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c5_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_5: serial@10940000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart5_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@10940000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10940000 0x30>;
+				interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi5_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@109500c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1014>;
+			status = "disabled";
+
+			hsi2c_6: i2c@10950000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c6_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_6: serial@10950000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10950000 0xc0>;
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart6_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10950000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10950000 0x30>;
+				interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi6_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi7: usi@109600c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1018>;
+			status = "disabled";
+
+			hsi2c_7: i2c@10960000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c7_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_7: serial@10960000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart7_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10960000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10960000 0x30>;
+				interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi7_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		usi8: usi@109700c0 {
 			compatible = "google,gs101-usi",
 				     "samsung,exynos850-usi";
@@ -400,6 +792,33 @@  hsi2c_8: i2c@10970000 {
 				clock-names = "hsi2c", "hsi2c_pclk";
 				status = "disabled";
 			};
+
+			serial_8: serial@10970000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10970000 0xc0>;
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart8_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10970000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10970000 0x30>;
+				interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi8_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usi_uart: usi@10a000c0 {
@@ -431,6 +850,62 @@  serial_0: serial@10a00000 {
 			};
 		};
 
+		usi14: usi@10a200c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10a200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric0 0x1028>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10a20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10a20000 0xc0>;
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_14: serial@10a20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10a20000 0xc0>;
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart14_bus_single>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_14: spi@10a20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10a20000 0x30>;
+				interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi14_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		cmu_peric1: clock-controller@10c00000 {
 			compatible = "google,gs101-cmu-peric1";
 			reg = <0x10c00000 0x4000>;
@@ -453,6 +928,230 @@  pinctrl_peric1: pinctrl@10c40000 {
 			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		usi0: usi@10d100c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@10d10000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d10000 0xc0>;
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_usi0: serial@10d10000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d10000 0xc0>;
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus_single>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10d10000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d10000 0x30>;
+				interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@10d200c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1004>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10d20000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d20000 0xc0>;
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_9: serial@10d20000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d20000 0xc0>;
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart9_bus_single>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10d20000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d20000 0x30>;
+				interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi9_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@10d300c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1008>;
+			status = "disabled";
+
+			hsi2c_10: i2c@10d30000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d30000 0xc0>;
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_10: serial@10d30000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d30000 0xc0>;
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart10_bus_single>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10d30000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d30000 0x30>;
+				interrupts = <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi10_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@10d400c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x100c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@10d40000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d40000 0xc0>;
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_11: serial@10d40000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d40000 0xc0>;
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart11_bus_single>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@10d40000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d40000 0x30>;
+				interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi11_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		usi12: usi@10d500c0 {
 			compatible = "google,gs101-usi",
 				     "samsung,exynos850-usi";
@@ -480,6 +1179,89 @@  hsi2c_12: i2c@10d50000 {
 				clock-names = "hsi2c", "hsi2c_pclk";
 				status = "disabled";
 			};
+
+			serial_12: serial@10d50000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d50000 0xc0>;
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart12_bus_single>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_12: spi@10d50000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d50000 0x30>;
+				interrupts = <GIC_SPI 655 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi12_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi13: usi@10d600c0 {
+			compatible = "google,gs101-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x10d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&sysreg_peric1 0x1014>;
+			status = "disabled";
+
+			hsi2c_13: i2c@10d60000 {
+				compatible = "google,gs101-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10d60000 0xc0>;
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_13: serial@10d60000 {
+				compatible = "google,gs101-uart";
+				reg = <0x10d60000 0xc0>;
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart13_bus_single>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_13: spi@10d60000 {
+				compatible = "google,gs101-spi";
+				reg = <0x10d60000 0x30>;
+				interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi13_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6>;
+				clock-names = "spi", "spi_busclk0";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		pinctrl_hsi1: pinctrl@11840000 {