diff mbox series

[v4,12/12] wifi: ath12k: support get_survey mac op for single wiphy

Message ID 20240312135557.1778379-13-quic_ramess@quicinc.com
State Superseded
Headers show
Series wifi: ath12k: Add single wiphy support | expand

Commit Message

Rameshkumar Sundaram March 12, 2024, 1:55 p.m. UTC
From: Sriram R <quic_srirrama@quicinc.com>

The radio for which the survey info needs to be collected
depends on the channel idx which could be based on the band.
Use the idx to identify the appropriate sband since multiple
bands could be combined for single wiphy case.

Also use the channel idx and sband to identify the corresponding
radio on which the survey results needs to be populated.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

Comments

Rameshkumar Sundaram March 19, 2024, 4:22 p.m. UTC | #1
On 3/13/2024 4:55 AM, Jeff Johnson wrote:
> On 3/12/2024 6:55 AM, Rameshkumar Sundaram wrote:
>> From: Sriram R <quic_srirrama@quicinc.com>
>>
>> The radio for which the survey info needs to be collected
>> depends on the channel idx which could be based on the band.
>> Use the idx to identify the appropriate sband since multiple
>> bands could be combined for single wiphy case.
>>
>> Also use the channel idx and sband to identify the corresponding
>> radio on which the survey results needs to be populated.
>>
>> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
>> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
>>
>> Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
>> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
>> ---
>>   drivers/net/wireless/ath/ath12k/mac.c | 25 ++++++++++++++++---------
>>   1 file changed, 16 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
>> index 6123d7db2edc..a31003f8325d 100644
>> --- a/drivers/net/wireless/ath/ath12k/mac.c
>> +++ b/drivers/net/wireless/ath/ath12k/mac.c
>> @@ -7821,7 +7821,6 @@ ath12k_mac_update_bss_chan_survey(struct ath12k *ar,
>>   static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
>>   				    struct survey_info *survey)
>>   {
>> -	struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
>>   	struct ath12k *ar;
>>   	struct ieee80211_supported_band *sband;
>>   	struct survey_info *ar_survey;
>> @@ -7830,12 +7829,6 @@ static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
>>   	if (idx >= ATH12K_NUM_CHANS)
>>   		return -ENOENT;
>>   
>> -	ar = ath12k_ah_to_ar(ah, 0);
>> -
>> -	ar_survey = &ar->survey[idx];
>> -
>> -	mutex_lock(&ar->conf_mutex);
>> -
>>   	sband = hw->wiphy->bands[NL80211_BAND_2GHZ];
>>   	if (sband && idx >= sband->n_channels) {
>>   		idx -= sband->n_channels;
>> @@ -7850,6 +7843,21 @@ static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
>>   		goto exit;
>>   	}
>>   
>> +	ar = ath12k_mac_get_ar_by_chan(hw, &sband->channels[idx]);
>> +	if (!ar) {
>> +		if (sband->channels[idx].flags & IEEE80211_CHAN_DISABLED) {
>> +			ret = 0;
>> +			memset(survey, 0, sizeof(*survey));
>> +			goto exit;
>> +		}
>> +		ret = -ENOENT;
>> +		goto exit;
>> +	}
>> +
>> +	ar_survey = &ar->survey[idx];
>> +
>> +	mutex_lock(&ar->conf_mutex);
>> +
>>   	ath12k_mac_update_bss_chan_survey(ar, &sband->channels[idx]);
>>   
>>   	spin_lock_bh(&ar->data_lock);
>> @@ -7861,9 +7869,8 @@ static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
>>   	if (ar->rx_channel == survey->channel)
>>   		survey->filled |= SURVEY_INFO_IN_USE;
>>   
>> -exit:
>>   	mutex_unlock(&ar->conf_mutex);
>> -
>> +exit:
> 
> goto should normally only be used when there is centralized cleanup.
> since now there is no cleanup required, all of the goto exit calls should just
> directly return the appropriate error
> 
Sure, this sneaked through while rebasing, thanks for pointing out. Will 
fix it in next version.
>>   	return ret;
>>   }
>>   
>
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 6123d7db2edc..a31003f8325d 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -7821,7 +7821,6 @@  ath12k_mac_update_bss_chan_survey(struct ath12k *ar,
 static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
 				    struct survey_info *survey)
 {
-	struct ath12k_hw *ah = ath12k_hw_to_ah(hw);
 	struct ath12k *ar;
 	struct ieee80211_supported_band *sband;
 	struct survey_info *ar_survey;
@@ -7830,12 +7829,6 @@  static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
 	if (idx >= ATH12K_NUM_CHANS)
 		return -ENOENT;
 
-	ar = ath12k_ah_to_ar(ah, 0);
-
-	ar_survey = &ar->survey[idx];
-
-	mutex_lock(&ar->conf_mutex);
-
 	sband = hw->wiphy->bands[NL80211_BAND_2GHZ];
 	if (sband && idx >= sband->n_channels) {
 		idx -= sband->n_channels;
@@ -7850,6 +7843,21 @@  static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
 		goto exit;
 	}
 
+	ar = ath12k_mac_get_ar_by_chan(hw, &sband->channels[idx]);
+	if (!ar) {
+		if (sband->channels[idx].flags & IEEE80211_CHAN_DISABLED) {
+			ret = 0;
+			memset(survey, 0, sizeof(*survey));
+			goto exit;
+		}
+		ret = -ENOENT;
+		goto exit;
+	}
+
+	ar_survey = &ar->survey[idx];
+
+	mutex_lock(&ar->conf_mutex);
+
 	ath12k_mac_update_bss_chan_survey(ar, &sband->channels[idx]);
 
 	spin_lock_bh(&ar->data_lock);
@@ -7861,9 +7869,8 @@  static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
 	if (ar->rx_channel == survey->channel)
 		survey->filled |= SURVEY_INFO_IN_USE;
 
-exit:
 	mutex_unlock(&ar->conf_mutex);
-
+exit:
 	return ret;
 }