diff mbox series

[v1] slimbus: qcom-ngd-ctrl: Add timeout for wait operation

Message ID 20240304134228.16627-1-quic_vdadhani@quicinc.com
State New
Headers show
Series [v1] slimbus: qcom-ngd-ctrl: Add timeout for wait operation | expand

Commit Message

Viken Dadhaniya March 4, 2024, 1:42 p.m. UTC 
In current driver qcom_slim_ngd_up_worker() indefinitely
waiting for ctrl->qmi_up completion object. This is
resulting in workqueue lockup on Kthread.

Added wait_for_completion_interruptible_timeout to
allow the thread to wait for specific timeout period and
bail out instead waiting infinitely.

Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index efeba8275a66..c27076d8b7db 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -83,6 +83,7 @@ 
 
 #define QCOM_SLIM_NGD_AUTOSUSPEND	MSEC_PER_SEC
 #define SLIM_RX_MSGQ_TIMEOUT_VAL	0x10000
+#define SLIM_QMI_TIMEOUT_MS		1000
 
 #define SLIM_LA_MGR	0xFF
 #define SLIM_ROOT_FREQ	24576000
@@ -1451,7 +1452,11 @@  static void qcom_slim_ngd_up_worker(struct work_struct *work)
 	ctrl = container_of(work, struct qcom_slim_ngd_ctrl, ngd_up_work);
 
 	/* Make sure qmi service is up before continuing */
-	wait_for_completion_interruptible(&ctrl->qmi_up);
+	if (!wait_for_completion_interruptible_timeout(&ctrl->qmi_up,
+						       msecs_to_jiffies(SLIM_QMI_TIMEOUT_MS))) {
+		dev_err(ctrl->dev, "QMI wait timeout\n");
+		return;
+	}
 
 	mutex_lock(&ctrl->ssr_lock);
 	qcom_slim_ngd_enable(ctrl, true);