| Message ID | 20240313102713.1727458-1-frut3k7@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: ipq8074: Remove unused gpio from QPIC pins | expand |
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index e5b89753aa5c..8bed34174460 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -349,7 +349,7 @@ qpic_pins: qpic-state { "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", - "gpio15", "gpio16", "gpio17"; + "gpio15", "gpio17"; function = "qpic"; drive-strength = <8>; bias-disable;
gpio16 will only be used for LCD support, as its NAND/LCDC data[8] so its bit 9 of the parallel QPIC interface, and ONFI NAND is only 8 or 16-bit with only 8-bit one being supported in our case so that pin is unused. It should be dropped from the default NAND pinctrl configuration as its unused and only needed for LCD. Signed-off-by: Paweł Owoc <frut3k7@gmail.com> --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)