@@ -30,6 +30,7 @@
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-mc.h>
#include <media/v4l2-subdev.h>
@@ -742,6 +743,18 @@ static void mipi_csis_stop_stream(struct mipi_csis_device *csis)
mipi_csis_system_enable(csis, false);
}
+static void mipi_csis_queue_event_sof(struct mipi_csis_device *csis)
+{
+ struct v4l2_event event = {
+ .type = V4L2_EVENT_FRAME_SYNC,
+ };
+
+ u32 frame = mipi_csis_read(csis, MIPI_CSIS_FRAME_COUNTER_CH(0));
+
+ event.u.frame_sync.frame_sequence = frame;
+ v4l2_event_queue(csis->sd.devnode, &event);
+}
+
static irqreturn_t mipi_csis_irq_handler(int irq, void *dev_id)
{
struct mipi_csis_device *csis = dev_id;
@@ -765,6 +778,10 @@ static irqreturn_t mipi_csis_irq_handler(int irq, void *dev_id)
event->counter++;
}
}
+
+ if (status & MIPI_CSIS_INT_SRC_FRAME_START)
+ mipi_csis_queue_event_sof(csis);
+
spin_unlock_irqrestore(&csis->slock, flags);
mipi_csis_write(csis, MIPI_CSIS_INT_SRC, status);
@@ -1154,8 +1171,23 @@ static int mipi_csis_log_status(struct v4l2_subdev *sd)
return 0;
}
+static int mipi_csis_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
+ struct v4l2_event_subscription *sub)
+{
+ if (sub->type != V4L2_EVENT_FRAME_SYNC)
+ return -EINVAL;
+
+ /* V4L2_EVENT_FRAME_SYNC doesn't require an id, so zero should be set */
+ if (sub->id != 0)
+ return -EINVAL;
+
+ return v4l2_event_subscribe(fh, sub, 0, NULL);
+}
+
static const struct v4l2_subdev_core_ops mipi_csis_core_ops = {
.log_status = mipi_csis_log_status,
+ .subscribe_event = mipi_csis_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
};
static const struct v4l2_subdev_video_ops mipi_csis_video_ops = {
@@ -1358,7 +1390,7 @@ static int mipi_csis_subdev_init(struct mipi_csis_device *csis)
snprintf(sd->name, sizeof(sd->name), "csis-%s",
dev_name(csis->dev));
- sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
sd->ctrl_handler = NULL;
sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
The Samsung CSIS Mipi receiver provides a start-of-frame interrupt and a framecount register. As the CSI receiver is the hardware unit that lies closest to the sensor, the frame counter is the best we can get on these devices. In case of the ISI available on the i.MX8 M Plus it is also the only native start-of-frame signal available. This patch exposes the sof interrupt and the framecount as V4L2_EVENT_FRAME_SYNC event on the subdevice. It was tested on a Debix-Som-A with a 6.8-rc4 kernel. Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com> --- drivers/media/platform/nxp/imx-mipi-csis.c | 34 +++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-)