diff mbox series

arm64: dts: qcom: sm8650: fix usb interrupts properties

Message ID 20240314-topic-sm8650-upstream-usb-dt-irq-fix-v1-1-ea8ab2051869@linaro.org
State New
Headers show
Series arm64: dts: qcom: sm8650: fix usb interrupts properties | expand

Commit Message

Neil Armstrong March 14, 2024, 8:53 a.m. UTC 
Update the usb interrupts properties to fix the following
bindings check errors:
usb@a6f8800: interrupt-names:0: 'pwr_event' was expected
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:1: 'hs_phy_irq' was expected
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:2: 'dp_hs_phy_irq' was expected
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names:3: 'dm_hs_phy_irq' was expected
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
usb@a6f8800: interrupt-names: ['hs_phy_irq', 'ss_phy_irq', 'dm_hs_phy_irq', 'dp_hs_phy_irq'] is too short
        from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#

Cc: Krishna Kurapati <quic_kriskura@quicinc.com>
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8650.dtsi | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)


---
base-commit: 9bb9b28d0568991b1d63e66fe75afa5f97ad1156
change-id: 20240314-topic-sm8650-upstream-usb-dt-irq-fix-d6bb2fed3fa9

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index ba72d8f38420..985ef46a04e1 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3584,14 +3584,16 @@  usb_1: usb@a6f8800 {
 			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
 					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,