@@ -17,10 +17,16 @@ CONFIG_LOG_MAX_LEVEL=9
CONFIG_LOG_DEFAULT_LEVEL=4
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_BUS=2
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
+# CONFIG_CMD_BIND is not set
CONFIG_CMD_CLK=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_UFS=y
CONFIG_CMD_USB=y
CONFIG_CMD_CAT=y
@@ -32,20 +38,39 @@ CONFIG_CLK=y
CONFIG_CLK_QCOM_QCS404=y
CONFIG_CLK_QCOM_SDM845=y
CONFIG_MSM_GPIO=y
CONFIG_QCOM_PMIC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_QUP=y
+CONFIG_I2C_MUX=y
CONFIG_DM_KEYBOARD=y
CONFIG_BUTTON_KEYBOARD=y
+CONFIG_IOMMU=y
+CONFIG_QCOM_HYP_SMMU=y
+CONFIG_MISC=y
+CONFIG_NVMEM=y
+CONFIG_I2C_EEPROM=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_MSM=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_QCOM=y
+CONFIG_RGMII=y
CONFIG_PHY=y
+CONFIG_PHY_QCOM_QUSB2=y
+CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_QCOM_QCS404=y
CONFIG_PINCTRL_QCOM_SDM845=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_QCOM=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
CONFIG_SCSI=y
CONFIG_MSM_SERIAL=y
CONFIG_MSM_GENI_SERIAL=y
CONFIG_SPMI_MSM=y
@@ -54,8 +79,12 @@ CONFIG_SYSINFO_SMBIOS=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
CONFIG_UFS=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_FONT_8X16 is not set
CONFIG_VIDEO_FONT_16X32=y
@@ -64,27 +93,4 @@ CONFIG_NO_FB_CLEAR=y
CONFIG_VIDEO_SIMPLE=y
CONFIG_HEXDUMP=y
# CONFIG_GENERATE_SMBIOS_TABLE is not set
CONFIG_LMB_MAX_REGIONS=64
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PING=y
-CONFIG_DM_ETH=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_DM_MDIO=y
-CONFIG_DWC_ETH_QOS=y
-CONFIG_DWC_ETH_QOS_QCOM=y
-CONFIG_RGMII=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_MISC=y
-CONFIG_NVMEM=y
-CONFIG_DM_I2C=y
-CONFIG_I2C_SUPPORT=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_EEPROM=y
-CONFIG_SYS_I2C=y
-CONFIG_SYS_I2C_QUP=y
-CONFIG_SYS_I2C_EEPROM_BUS=2
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
Enable support for the DWC3 USB controller and required dependencies for Qualcomm boards, specifically the DB845c: * IOMMU / SMMU * USB high-speed PHYs * Mass storage and ACM gadgets Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- configs/qcom_defconfig | 52 ++++++++++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 23 deletions(-)