diff mbox series

rteval: Remove XML-RPC server

Message ID 20240320082049.11977-1-tglozar@redhat.com
State New
Headers show
Series rteval: Remove XML-RPC server | expand

Commit Message

Tomas Glozar March 20, 2024, 8:20 a.m. UTC
From: Tomas Glozar <tglozar@redhat.com>

Remove code for rteval XML-RPC server and client as well as associated
modules (rtevalMailer). The code was disabled in 2d547eb6 ("rteval:
Disable options for remote xmlrpc server").

Also remove all references to the functionality in documentation except
for author credits.

Signed-off-by: Tomas Glozar <tglozar@redhat.com>
---
 .gitignore                             |    5 -
 Makefile                               |   15 +-
 doc/rteval.8                           |    6 -
 doc/rteval.txt                         |   18 +-
 rteval-cmd                             |    6 -
 rteval/__init__.py                     |   25 -
 rteval/rtevalConfig.py                 |    1 -
 rteval/rtevalMailer.py                 |   51 --
 rteval/rtevalXMLRPC.py                 |   97 ---
 rteval/rtevalclient.py                 |   60 --
 server/COPYING                         |  339 --------
 server/INSTALL                         |  302 -------
 server/Logger.py                       |   19 -
 server/Makefile.am                     |   38 -
 server/README.xmlrpc                   |  201 -----
 server/apache-rteval-wsgi.conf.tpl     |   22 -
 server/apache-rteval.conf.tpl          |   18 -
 server/configure.ac                    |  130 ---
 server/database.py                     |  238 ------
 server/gen_config.sh                   |   14 -
 server/parser/Makefile.am              |   30 -
 server/parser/README.parser            |  204 -----
 server/parser/argparser.c              |  140 ---
 server/parser/argparser.h              |   21 -
 server/parser/configparser.c           |  171 ----
 server/parser/configparser.h           |   25 -
 server/parser/eurephia_nullsafe.c      |   54 --
 server/parser/eurephia_nullsafe.h      |  103 ---
 server/parser/eurephia_values.c        |  301 -------
 server/parser/eurephia_values.h        |   48 --
 server/parser/eurephia_values_struct.h |   38 -
 server/parser/eurephia_xml.c           |  147 ----
 server/parser/eurephia_xml.h           |   43 -
 server/parser/log.c                    |  228 -----
 server/parser/log.h                    |   43 -
 server/parser/parsethread.c            |  370 --------
 server/parser/parsethread.h            |   38 -
 server/parser/pgsql.c                  | 1093 ------------------------
 server/parser/pgsql.h                  |   58 --
 server/parser/rteval-parserd.c         |  533 ------------
 server/parser/rteval-parserd.init      |  126 ---
 server/parser/rteval-parserd.sysconfig |   23 -
 server/parser/sha1.c                   |  615 -------------
 server/parser/sha1.h                   |   66 --
 server/parser/statuses.h               |   33 -
 server/parser/threadinfo.h             |   38 -
 server/parser/xmlparser.c              |  620 --------------
 server/parser/xmlparser.h              |   75 --
 server/parser/xmlparser.xsl            |  607 -------------
 server/remove_rtevalrun                |   65 --
 server/rteval-parser.spec              |  133 ---
 server/rteval_testserver.py            |  107 ---
 server/rteval_xmlrpc.py                |   71 --
 server/rteval_xmlrpc.wsgi              |   94 --
 server/rtevaldb.py                     |   57 --
 server/sql/delta-1.0_1.1.sql           |   15 -
 server/sql/delta-1.1_1.2.sql           |    9 -
 server/sql/delta-1.2_1.3.sql           |    6 -
 server/sql/delta-1.3_1.4.sql           |    6 -
 server/sql/delta-1.4_1.5.sql           |   31 -
 server/sql/rteval-1.0.sql              |  189 ----
 server/sql/rteval-1.1.sql              |  203 -----
 server/sql/rteval-1.2.sql              |  207 -----
 server/sql/rteval-1.3.sql              |  208 -----
 server/sql/rteval-1.4.sql              |  209 -----
 server/sql/rteval-1.5.sql              |  235 -----
 server/testclient.py                   |   37 -
 server/testclient_sendreportfile       |   36 -
 server/unittest.py                     |   91 --
 server/xmlrpc_API1.py                  |  100 ---
 unit-tests/unittest.py                 |    1 -
 71 files changed, 2 insertions(+), 9604 deletions(-)
 delete mode 100644 rteval/rtevalMailer.py
 delete mode 100644 rteval/rtevalXMLRPC.py
 delete mode 100644 rteval/rtevalclient.py
 delete mode 100644 server/COPYING
 delete mode 100644 server/INSTALL
 delete mode 100644 server/Logger.py
 delete mode 100644 server/Makefile.am
 delete mode 100644 server/README.xmlrpc
 delete mode 100644 server/apache-rteval-wsgi.conf.tpl
 delete mode 100644 server/apache-rteval.conf.tpl
 delete mode 100644 server/configure.ac
 delete mode 100644 server/database.py
 delete mode 100755 server/gen_config.sh
 delete mode 100644 server/parser/Makefile.am
 delete mode 100644 server/parser/README.parser
 delete mode 100644 server/parser/argparser.c
 delete mode 100644 server/parser/argparser.h
 delete mode 100644 server/parser/configparser.c
 delete mode 100644 server/parser/configparser.h
 delete mode 100644 server/parser/eurephia_nullsafe.c
 delete mode 100644 server/parser/eurephia_nullsafe.h
 delete mode 100644 server/parser/eurephia_values.c
 delete mode 100644 server/parser/eurephia_values.h
 delete mode 100644 server/parser/eurephia_values_struct.h
 delete mode 100644 server/parser/eurephia_xml.c
 delete mode 100644 server/parser/eurephia_xml.h
 delete mode 100644 server/parser/log.c
 delete mode 100644 server/parser/log.h
 delete mode 100644 server/parser/parsethread.c
 delete mode 100644 server/parser/parsethread.h
 delete mode 100644 server/parser/pgsql.c
 delete mode 100644 server/parser/pgsql.h
 delete mode 100644 server/parser/rteval-parserd.c
 delete mode 100755 server/parser/rteval-parserd.init
 delete mode 100644 server/parser/rteval-parserd.sysconfig
 delete mode 100644 server/parser/sha1.c
 delete mode 100644 server/parser/sha1.h
 delete mode 100644 server/parser/statuses.h
 delete mode 100644 server/parser/threadinfo.h
 delete mode 100644 server/parser/xmlparser.c
 delete mode 100644 server/parser/xmlparser.h
 delete mode 100644 server/parser/xmlparser.xsl
 delete mode 100755 server/remove_rtevalrun
 delete mode 100644 server/rteval-parser.spec
 delete mode 100644 server/rteval_testserver.py
 delete mode 100644 server/rteval_xmlrpc.py
 delete mode 100644 server/rteval_xmlrpc.wsgi
 delete mode 100644 server/rtevaldb.py
 delete mode 100644 server/sql/delta-1.0_1.1.sql
 delete mode 100644 server/sql/delta-1.1_1.2.sql
 delete mode 100644 server/sql/delta-1.2_1.3.sql
 delete mode 100644 server/sql/delta-1.3_1.4.sql
 delete mode 100644 server/sql/delta-1.4_1.5.sql
 delete mode 100644 server/sql/rteval-1.0.sql
 delete mode 100644 server/sql/rteval-1.1.sql
 delete mode 100644 server/sql/rteval-1.2.sql
 delete mode 100644 server/sql/rteval-1.3.sql
 delete mode 100644 server/sql/rteval-1.4.sql
 delete mode 100644 server/sql/rteval-1.5.sql
 delete mode 100644 server/testclient.py
 delete mode 100755 server/testclient_sendreportfile
 delete mode 100644 server/unittest.py
 delete mode 100644 server/xmlrpc_API1.py

Comments

John Kacur March 28, 2024, 4:15 p.m. UTC | #1
On Wed, 20 Mar 2024, tglozar@redhat.com wrote:

> From: Tomas Glozar <tglozar@redhat.com>
> 
> Remove code for rteval XML-RPC server and client as well as associated
> modules (rtevalMailer). The code was disabled in 2d547eb6 ("rteval:
> Disable options for remote xmlrpc server").
> 
> Also remove all references to the functionality in documentation except
> for author credits.
> 
> Signed-off-by: Tomas Glozar <tglozar@redhat.com>
> ---
>  .gitignore                             |    5 -
>  Makefile                               |   15 +-
>  doc/rteval.8                           |    6 -
>  doc/rteval.txt                         |   18 +-
>  rteval-cmd                             |    6 -
>  rteval/__init__.py                     |   25 -
>  rteval/rtevalConfig.py                 |    1 -
>  rteval/rtevalMailer.py                 |   51 --
>  rteval/rtevalXMLRPC.py                 |   97 ---
>  rteval/rtevalclient.py                 |   60 --
>  server/COPYING                         |  339 --------
>  server/INSTALL                         |  302 -------
>  server/Logger.py                       |   19 -
>  server/Makefile.am                     |   38 -
>  server/README.xmlrpc                   |  201 -----
>  server/apache-rteval-wsgi.conf.tpl     |   22 -
>  server/apache-rteval.conf.tpl          |   18 -
>  server/configure.ac                    |  130 ---
>  server/database.py                     |  238 ------
>  server/gen_config.sh                   |   14 -
>  server/parser/Makefile.am              |   30 -
>  server/parser/README.parser            |  204 -----
>  server/parser/argparser.c              |  140 ---
>  server/parser/argparser.h              |   21 -
>  server/parser/configparser.c           |  171 ----
>  server/parser/configparser.h           |   25 -
>  server/parser/eurephia_nullsafe.c      |   54 --
>  server/parser/eurephia_nullsafe.h      |  103 ---
>  server/parser/eurephia_values.c        |  301 -------
>  server/parser/eurephia_values.h        |   48 --
>  server/parser/eurephia_values_struct.h |   38 -
>  server/parser/eurephia_xml.c           |  147 ----
>  server/parser/eurephia_xml.h           |   43 -
>  server/parser/log.c                    |  228 -----
>  server/parser/log.h                    |   43 -
>  server/parser/parsethread.c            |  370 --------
>  server/parser/parsethread.h            |   38 -
>  server/parser/pgsql.c                  | 1093 ------------------------
>  server/parser/pgsql.h                  |   58 --
>  server/parser/rteval-parserd.c         |  533 ------------
>  server/parser/rteval-parserd.init      |  126 ---
>  server/parser/rteval-parserd.sysconfig |   23 -
>  server/parser/sha1.c                   |  615 -------------
>  server/parser/sha1.h                   |   66 --
>  server/parser/statuses.h               |   33 -
>  server/parser/threadinfo.h             |   38 -
>  server/parser/xmlparser.c              |  620 --------------
>  server/parser/xmlparser.h              |   75 --
>  server/parser/xmlparser.xsl            |  607 -------------
>  server/remove_rtevalrun                |   65 --
>  server/rteval-parser.spec              |  133 ---
>  server/rteval_testserver.py            |  107 ---
>  server/rteval_xmlrpc.py                |   71 --
>  server/rteval_xmlrpc.wsgi              |   94 --
>  server/rtevaldb.py                     |   57 --
>  server/sql/delta-1.0_1.1.sql           |   15 -
>  server/sql/delta-1.1_1.2.sql           |    9 -
>  server/sql/delta-1.2_1.3.sql           |    6 -
>  server/sql/delta-1.3_1.4.sql           |    6 -
>  server/sql/delta-1.4_1.5.sql           |   31 -
>  server/sql/rteval-1.0.sql              |  189 ----
>  server/sql/rteval-1.1.sql              |  203 -----
>  server/sql/rteval-1.2.sql              |  207 -----
>  server/sql/rteval-1.3.sql              |  208 -----
>  server/sql/rteval-1.4.sql              |  209 -----
>  server/sql/rteval-1.5.sql              |  235 -----
>  server/testclient.py                   |   37 -
>  server/testclient_sendreportfile       |   36 -
>  server/unittest.py                     |   91 --
>  server/xmlrpc_API1.py                  |  100 ---
>  unit-tests/unittest.py                 |    1 -
>  71 files changed, 2 insertions(+), 9604 deletions(-)
>  delete mode 100644 rteval/rtevalMailer.py
>  delete mode 100644 rteval/rtevalXMLRPC.py
>  delete mode 100644 rteval/rtevalclient.py
>  delete mode 100644 server/COPYING
>  delete mode 100644 server/INSTALL
>  delete mode 100644 server/Logger.py
>  delete mode 100644 server/Makefile.am
>  delete mode 100644 server/README.xmlrpc
>  delete mode 100644 server/apache-rteval-wsgi.conf.tpl
>  delete mode 100644 server/apache-rteval.conf.tpl
>  delete mode 100644 server/configure.ac
>  delete mode 100644 server/database.py
>  delete mode 100755 server/gen_config.sh
>  delete mode 100644 server/parser/Makefile.am
>  delete mode 100644 server/parser/README.parser
>  delete mode 100644 server/parser/argparser.c
>  delete mode 100644 server/parser/argparser.h
>  delete mode 100644 server/parser/configparser.c
>  delete mode 100644 server/parser/configparser.h
>  delete mode 100644 server/parser/eurephia_nullsafe.c
>  delete mode 100644 server/parser/eurephia_nullsafe.h
>  delete mode 100644 server/parser/eurephia_values.c
>  delete mode 100644 server/parser/eurephia_values.h
>  delete mode 100644 server/parser/eurephia_values_struct.h
>  delete mode 100644 server/parser/eurephia_xml.c
>  delete mode 100644 server/parser/eurephia_xml.h
>  delete mode 100644 server/parser/log.c
>  delete mode 100644 server/parser/log.h
>  delete mode 100644 server/parser/parsethread.c
>  delete mode 100644 server/parser/parsethread.h
>  delete mode 100644 server/parser/pgsql.c
>  delete mode 100644 server/parser/pgsql.h
>  delete mode 100644 server/parser/rteval-parserd.c
>  delete mode 100755 server/parser/rteval-parserd.init
>  delete mode 100644 server/parser/rteval-parserd.sysconfig
>  delete mode 100644 server/parser/sha1.c
>  delete mode 100644 server/parser/sha1.h
>  delete mode 100644 server/parser/statuses.h
>  delete mode 100644 server/parser/threadinfo.h
>  delete mode 100644 server/parser/xmlparser.c
>  delete mode 100644 server/parser/xmlparser.h
>  delete mode 100644 server/parser/xmlparser.xsl
>  delete mode 100755 server/remove_rtevalrun
>  delete mode 100644 server/rteval-parser.spec
>  delete mode 100644 server/rteval_testserver.py
>  delete mode 100644 server/rteval_xmlrpc.py
>  delete mode 100644 server/rteval_xmlrpc.wsgi
>  delete mode 100644 server/rtevaldb.py
>  delete mode 100644 server/sql/delta-1.0_1.1.sql
>  delete mode 100644 server/sql/delta-1.1_1.2.sql
>  delete mode 100644 server/sql/delta-1.2_1.3.sql
>  delete mode 100644 server/sql/delta-1.3_1.4.sql
>  delete mode 100644 server/sql/delta-1.4_1.5.sql
>  delete mode 100644 server/sql/rteval-1.0.sql
>  delete mode 100644 server/sql/rteval-1.1.sql
>  delete mode 100644 server/sql/rteval-1.2.sql
>  delete mode 100644 server/sql/rteval-1.3.sql
>  delete mode 100644 server/sql/rteval-1.4.sql
>  delete mode 100644 server/sql/rteval-1.5.sql
>  delete mode 100644 server/testclient.py
>  delete mode 100755 server/testclient_sendreportfile
>  delete mode 100644 server/unittest.py
>  delete mode 100644 server/xmlrpc_API1.py
> 
> diff --git a/.gitignore b/.gitignore
> index 4043947..a6e9401 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -27,9 +27,4 @@ MANIFEST
>  .deps
>  stamp-h1
>  autom4te.cache/
> -server/Makefile
> -server/config.log
> -server/config.status
> -server/parser/Makefile
> -server/parser/config.h
>  rteval-[0-9]*
> diff --git a/Makefile b/Makefile
> index b8bed64..d9a6b9f 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -9,10 +9,6 @@ PACKAGE :=	rteval
>  VERSION :=      $(shell $(PYTHON) -c "from rteval import RTEVAL_VERSION; print(RTEVAL_VERSION)")
>  D	:=	10
>  
> -# XML-RPC related files
> -XMLRPCVER := 1.6
> -XMLRPCDIR := server
> -
>  DESTDIR	:=
>  PREFIX  :=      /usr
>  DATADIR	:=	$(DESTDIR)/$(PREFIX)/share
> @@ -35,11 +31,9 @@ sysreport:
>  	$(PYTHON) rteval-cmd -D -v --workdir=$(HERE)/run --loaddir=$(HERE)/loadsource --duration=$(D) -i $(HERE)/rteval --sysreport
>  
>  clean:
> -	[ -f $(XMLRPCDIR)/Makefile ] && make -C $(XMLRPCDIR) clean || echo -n
> -	rm -f *~ rteval/*~ rteval/*.py[co] *.tar.bz2 *.tar.gz doc/*~ server/rteval-xmlrpc-*.tar.gz
> +	rm -f *~ rteval/*~ rteval/*.py[co] *.tar.bz2 *.tar.gz doc/*~
>  
>  realclean: clean
> -	[ -f $(XMLRPCDIR)/Makefile ] && make -C $(XMLRPCDIR) maintainer-clean || echo -n
>  	rm -rf run
>  
>  install: install_loads install_rteval
> @@ -67,13 +61,6 @@ rteval-$(VERSION).tar.bz2:
>  	mv dist/rteval-$(VERSION).tar.bz2 .
>  	rmdir dist
>  
> -rteval-xmlrpc-$(XMLRPCVER).tar.gz :
> -	cd $(XMLRPCDIR) ;             \
> -	autoreconf --install ;           \
> -	./configure --prefix=$(PREFIX) ; \
> -	make distcheck
> -	cp $(XMLRPCDIR)/rteval-xmlrpc-$(XMLRPCVER).tar.gz $(HERE)/
> -
>  help:
>  	@echo ""
>  	@echo "rteval Makefile targets:"
> diff --git a/doc/rteval.8 b/doc/rteval.8
> index a8129f1..578de37 100644
> --- a/doc/rteval.8
> +++ b/doc/rteval.8
> @@ -84,12 +84,6 @@ information on the running system.
>  .B \-D, \-\-debug
>  Turn on debugging prints during run
>  .TP
> -.B \-X HOST, \-\-xmprpc-submit=HOST
> -Have rteval send report data to HOST following the run, using XML-RPC
> -.TP
> -.B \-P, \-\-xmlrpc-no-abort
> -Do not abort if XML-RPC server do not respond to ping  request
> -.TP
>  .B \-Z, \-\-summarize
>  Have rteval summarize an existing report. This will not cause loads or
>  meausurement utilities to be run.
> diff --git a/doc/rteval.txt b/doc/rteval.txt
> index 569168e..95d501b 100644
> --- a/doc/rteval.txt
> +++ b/doc/rteval.txt
> @@ -33,8 +33,7 @@ boost the system load.
>  Rteval runs for a specified length of time (typically 12 hours). When
>  an rteval run is completed, a statisical analysis of the results is
>  done, an XML file is generated, containing system state, raw result
> -data and statistical analysis results and optionally the XML is sent
> -by XML-RPC to a database for reporting.
> +data and statistical analysis results.
>  
>  The Load Applications
>  ---------------------
> @@ -228,18 +227,3 @@ A --numa option was added to the cyclictest program to use the libnuma
>  library to bind threads to local memory nodes and allocate memory on
>  the closest memory node, so to minimize the time required to access
>  memory. 
> -
> -Further Development
> --------------------
> -
> -Once we started getting rteval run information it was natural that we
> -would want to store it in a database for further analysis (especially
> -watching for performance regressions). David Sommerseth created a set
> -of tables for a PostgreSQL database and then added an option to rteval
> -to ship the results back to a database server using XML-RPC. This
> -option is currently used internally at Red Hat do ship rteval run data
> -back to our internal DB server. There are no plans to open this data
> -up to the public, but the XML-RPC code is there if someone else wants
> -to use the facility. (No, there are no backdoors in the code that ship
> -run data back to Red Hat; it's Python code, look and see!). 
> -
> diff --git a/rteval-cmd b/rteval-cmd
> index a5e8746..b242aa4 100755
> --- a/rteval-cmd
> +++ b/rteval-cmd
> @@ -122,12 +122,6 @@ def parse_options(cfg, parser, cmdargs):
>      parser.add_argument("-D", '--debug', dest='rteval___debugging',
>                        action='store_true', default=rtevcfg.debugging,
>                        help=f'turn on debug prints (default: {rtevcfg.debugging})')
> -    #parser.add_option("-X", '--xmlrpc-submit', dest='rteval___xmlrpc',
> -    #                  action='store', default=rtevcfg.xmlrpc, metavar='HOST',
> -    #                  help='Hostname to XML-RPC server to submit reports')
> -    #parser.add_option("-P", "--xmlrpc-no-abort", dest="rteval___xmlrpc_noabort",
> -    #                  action='store_true', default=False,
> -    #                  help="Do not abort if XML-RPC server do not respond to ping request");
>      parser.add_argument("-Z", '--summarize', dest='rteval___summarize',
>                        action='store_true', default=False,
>                        help='summarize an already existing XML report')
> diff --git a/rteval/__init__.py b/rteval/__init__.py
> index ca018f6..b5db3b3 100644
> --- a/rteval/__init__.py
> +++ b/rteval/__init__.py
> @@ -22,10 +22,8 @@ import sysconfig
>  from rteval.modules.loads import LoadModules
>  from rteval.modules.measurement import MeasurementModules, MeasurementProfile
>  from rteval.rtevalReport import rtevalReport
> -from rteval.rtevalXMLRPC import rtevalXMLRPC
>  from rteval.Log import Log
>  from rteval import rtevalConfig
> -from rteval import rtevalMailer
>  from rteval import version
>  
>  RTEVAL_VERSION = version.RTEVAL_VERSION
> @@ -70,12 +68,6 @@ class RtEval(rtevalReport):
>          from .sysinfo import SystemInfo
>          self._sysinfo = SystemInfo(self.__rtevcfg, logger=self.__logger)
>  
> -        # prepare a mailer, if that's configured
> -        if self.__cfg.HasSection('smtp'):
> -            self.__mailer = rtevalMailer.rtevalMailer(self.__cfg.GetSection('smtp'))
> -        else:
> -            self.__mailer = None
> -
>          if not os.path.exists(self.__rtevcfg.xslt_report):
>              raise RuntimeError(f"can't find XSL template ({self.__rtevcfg.xslt_report})!")
>  
> @@ -91,19 +83,6 @@ class RtEval(rtevalReport):
>          rtevalReport.__init__(self, self.__version,
>                                self.__rtevcfg.installdir, self.__rtevcfg.annotate)
>  
> -        # If --xmlrpc-submit is given, check that we can access the server
> -        if self.__rtevcfg.xmlrpc:
> -            self.__xmlrpc = rtevalXMLRPC(self.__rtevcfg.xmlrpc, self.__logger, self.__mailer)
> -            if not self.__xmlrpc.Ping():
> -                if not self.__rtevcfg.xmlrpc_noabort:
> -                    print(f"ERROR: Could not reach XML-RPC server '{self.__rtevcfg.xmlrpc}'.  Aborting.")
> -                    sys.exit(2)
> -                else:
> -                    print("WARNING: Could not ping the XML-RPC server.  Will continue anyway.")
> -        else:
> -            self.__xmlrpc = None
> -
> -
>      @staticmethod
>      def __show_remaining_time(remaining):
>          secs = int(remaining)
> @@ -271,10 +250,6 @@ class RtEval(rtevalReport):
>          if self.__rtevcfg.sysreport:
>              self._sysinfo.run_sysreport(self.__reportdir)
>  
> -        # if --xmlrpc-submit | -X was given, send our report to the given host
> -        if self.__xmlrpc:
> -            rtevalres = self.__xmlrpc.SendReport(self.GetXMLreport())
> -
>          if earlystop:
>              rtevalres = 1
>          self._sysinfo.copy_dmesg(self.__reportdir)
> diff --git a/rteval/rtevalConfig.py b/rteval/rtevalConfig.py
> index 030d420..2c0436a 100644
> --- a/rteval/rtevalConfig.py
> +++ b/rteval/rtevalConfig.py
> @@ -73,7 +73,6 @@ default_config = {
>          'workdir'    : os.getcwd(),
>          'installdir' : installdir,
>          'srcdir'     : default_config_search(['loadsource']),
> -        'xmlrpc'     : None,
>          'xslt_report': default_config_search(['rteval_text.xsl'], os.path.isfile),
>          'xslt_histogram': default_config_search(['rteval_histogram_raw.xsl'], os.path.isfile),
>          'report_interval': '600',
> diff --git a/rteval/rtevalMailer.py b/rteval/rtevalMailer.py
> deleted file mode 100644
> index ef3b571..0000000
> --- a/rteval/rtevalMailer.py
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   rtevalmailer.py - module for sending e-mails
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import smtplib
> -import email
> -
> -
> -class rtevalMailer(object):
> -    "rteval mailer - sends messages via an SMTP server to designated e-mail addresses"
> -
> -    def __init__(self, cfg):
> -        # this configuration object needs to have the following attributes set:
> -        # * smtp_server
> -        # * from_address
> -        # * to_address
> -        #
> -        errmsg = ""
> -        if 'smtp_server' not in cfg:
> -            errmsg = "\n** Missing smtp_server in config"
> -        if 'from_address' not in cfg:
> -            errmsg += "\n** Missing from_address in config"
> -        if 'to_address' not in cfg:
> -            errmsg += "\n** Missing to_address in config"
> -
> -        if not errmsg == "":
> -            raise LookupError(errmsg)
> -
> -        self.config = cfg
> -
> -
> -    def __prepare_msg(self, subj, body):
> -        msg = email.MIMEText.MIMEText(body)
> -        msg['subject'] = subj;
> -        msg['From'] = "rteval mailer <" + self.config.from_address+">"
> -        msg['To'] = self.config.to_address
> -        return msg
> -
> -
> -    def SendMessage(self, subject, body):
> -        "Sends an e-mail to the configured mail server and recipient"
> -
> -        msg = self.__prepare_msg(subject, body)
> -        srv = smtplib.SMTP()
> -        srv.connect(self.config.smtp_server)
> -        srv.sendmail(self.config.from_address, self.config.to_address, str(msg))
> -        srv.close()
> -
> diff --git a/rteval/rtevalXMLRPC.py b/rteval/rtevalXMLRPC.py
> deleted file mode 100644
> index 6b31653..0000000
> --- a/rteval/rtevalXMLRPC.py
> +++ /dev/null
> @@ -1,97 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -# rtevalXMLRPC.py - main rteval XML-RPC class
> -#
> -#   Copyright 2009 - 2013   Clark Williams <williams@redhat.com>
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import socket
> -import time
> -import xmlrpc.client
> -from .rtevalclient import rtevalclient
> -from .Log import Log
> -
> -class rtevalXMLRPC:
> -    def __init__(self, host, logger, mailer=None):
> -        self.__host = host
> -        self.__url = f"http://{self.__host}/rteval/API1/"
> -        self.__logger = logger
> -        self.__mailer = mailer
> -        self.__client = rtevalclient.rtevalclient(self.__url)
> -
> -
> -    def Ping(self):
> -        res = None
> -        self.__logger.log(Log.DEBUG, f"Checking if XML-RPC server '{self.__host}' is reachable")
> -        attempt = 0
> -        ping_success = False
> -        warning_sent = False
> -        while attempt < 6:
> -            try:
> -                res = self.__client.Hello()
> -                attempt = 10
> -                ping_success = True
> -            except xmlrpc.client.ProtocolError:
> -                # Server do not support Hello(), but is reachable
> -                self.__logger.log(Log.INFO, f"Got XML-RPC connection with {self.__host} but it did not support Hello()")
> -                res = None
> -            except socket.error as err:
> -                self.__logger.log(Log.INFO, f"Could not establish XML-RPC contact with {self.__host}\n{str(err)}")
> -
> -                # Do attempts handling
> -                attempt += 1
> -                if attempt > 5:
> -                    break # To avoid sleeping before we abort
> -
> -                if (self.__mailer is not None) and (not warning_sent):
> -                    self.__mailer.SendMessage("[RTEVAL:WARNING] Failed to ping XML-RPC server", f"Server {self.__host} did not respond.")
> -                    warning_sent = True
> -
> -                print(f"Failed pinging XML-RPC server.  Doing another attempt({attempt}) ")
> -                time.sleep(attempt) #*15) # Incremental sleep - sleep attempts*15 seconds
> -                ping_success = False
> -
> -        if res:
> -            self.__logger.log(Log.INFO, f'Verified XML-RPC connection with {res["server"]} (XML-RPC API version: {res["APIversion"]})')
> -            self.__logger.log(Log.DEBUG, f"Recieved greeting: {res['greeting']}")
> -        return ping_success
> -
> -
> -    def SendReport(self, xmlreport):
> -        "Sends the report to a given XML-RPC host.  Returns 0 on success or 2 on submission failure."
> -
> -        attempt = 0
> -        exitcode = 2   # Presume failure
> -        warning_sent = False
> -        while attempt < 6:
> -            try:
> -                print(f"Submitting report to {self.__url}")
> -                rterid = self.__client.SendReport(xmlreport)
> -                print(f"Report registered with submission id {rterid}")
> -                attempt = 10
> -                exitcode = 0 # Success
> -            except socket.error:
> -                attempt += 1
> -                if attempt > 5:
> -                    break # To avoid sleeping before we abort
> -
> -                if (self.__mailer is not None) and (not warning_sent):
> -                    self.__mailer.SendMessage("[RTEVAL:WARNING] Failed to submit report to XML-RPC server", f"Server {self.__host} did not respond.  Not giving up yet.")
> -                    warning_sent = True
> -
> -                print(f"Failed sending report. Making another attempt({attempt}) ")
> -                time.sleep(attempt) #*5*60) # Incremental sleep - sleep attempts*5 minutes
> -
> -            except Exception as err:
> -                raise err
> -
> -
> -        if self.__mailer is not None:
> -            # Send final result messages
> -            if exitcode == 2:
> -                self.__mailer.SendMessage("[RTEVAL:FAILURE] Failed to submit report to XML-RPC server", f"Server {self.__host} did not respond at all after {attempt - 1} attempts.")
> -            elif (exitcode == 0) and warning_sent:
> -                self.__mailer.SendMessage("[RTEVAL:SUCCESS] XML-RPC server available again",
> -                                          f"Succeeded to submit the report to {self.__host}")
> -
> -        return exitcode
> diff --git a/rteval/rtevalclient.py b/rteval/rtevalclient.py
> deleted file mode 100644
> index 8f48129..0000000
> --- a/rteval/rtevalclient.py
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   rtevalclient.py
> -#   XML-RPC client for sending data to a central rteval result server
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import xmlrpc.client
> -import libxml2
> -import io
> -import bz2
> -import base64
> -import platform
> -
> -class rtevalclient:
> -    """
> -    rtevalclient is a library for sending rteval reports to an rteval server via XML-RPC.
> -    """
> -    def __init__(self, url="http://rtserver.farm.hsv.redhat.com/rteval/API1/", hostn = None):
> -        self.srv = xmlrpc.client.ServerProxy(url)
> -        if hostn is None:
> -            self.hostname = platform.node()
> -        else:
> -            self.hostname = hostn
> -
> -    def Hello(self):
> -        return self.srv.Hello(self.hostname)
> -
> -    def DatabaseStatus(self):
> -        return self.srv.DatabaseStatus()
> -
> -    def SendReport(self, xmldoc):
> -        if xmldoc.type != 'document_xml':
> -            raise Exception("Input is not XML document")
> -
> -        fbuf = io.StringIO()
> -        xmlbuf = libxml2.createOutputBuffer(fbuf, 'UTF-8')
> -        doclen = xmldoc.saveFileTo(xmlbuf, 'UTF-8')
> -
> -        compr = bz2.BZ2Compressor(9)
> -        cmpr = compr.compress(fbuf.getvalue())
> -        data = base64.b64encode(cmpr + compr.flush())
> -        ret = self.srv.SendReport(self.hostname, data)
> -        print(f"rtevalclient::SendReport() - Sent {len(data)} bytes (XML document length: {doclen} bytes, compression ratio: {(1-(float(len(data)) / float(doclen)))*100}:.2f)")
> -        return ret
> -
> -    def SendDataAsFile(self, fname, data, decompr = False):
> -        compr = bz2.BZ2Compressor(9)
> -        cmprdata = compr.compress(data)
> -        b64data = base64.b64encode(cmprdata + compr.flush())
> -        return self.srv.StoreRawFile(self.hostname, fname, b64data, decompr)
> -
> -
> -    def SendFile(self, fname, decompr = False):
> -        f = open(fname, "r")
> -        srvname = self.SendDataAsFile(fname, f.read(), decompr)
> -        f.close()
> -        return srvname
> -
> diff --git a/server/COPYING b/server/COPYING
> deleted file mode 100644
> index d159169..0000000
> --- a/server/COPYING
> +++ /dev/null
> @@ -1,339 +0,0 @@
> -                    GNU GENERAL PUBLIC LICENSE
> -                       Version 2, June 1991
> -
> - Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
> - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
> - Everyone is permitted to copy and distribute verbatim copies
> - of this license document, but changing it is not allowed.
> -
> -                            Preamble
> -
> -  The licenses for most software are designed to take away your
> -freedom to share and change it.  By contrast, the GNU General Public
> -License is intended to guarantee your freedom to share and change free
> -software--to make sure the software is free for all its users.  This
> -General Public License applies to most of the Free Software
> -Foundation's software and to any other program whose authors commit to
> -using it.  (Some other Free Software Foundation software is covered by
> -the GNU Lesser General Public License instead.)  You can apply it to
> -your programs, too.
> -
> -  When we speak of free software, we are referring to freedom, not
> -price.  Our General Public Licenses are designed to make sure that you
> -have the freedom to distribute copies of free software (and charge for
> -this service if you wish), that you receive source code or can get it
> -if you want it, that you can change the software or use pieces of it
> -in new free programs; and that you know you can do these things.
> -
> -  To protect your rights, we need to make restrictions that forbid
> -anyone to deny you these rights or to ask you to surrender the rights.
> -These restrictions translate to certain responsibilities for you if you
> -distribute copies of the software, or if you modify it.
> -
> -  For example, if you distribute copies of such a program, whether
> -gratis or for a fee, you must give the recipients all the rights that
> -you have.  You must make sure that they, too, receive or can get the
> -source code.  And you must show them these terms so they know their
> -rights.
> -
> -  We protect your rights with two steps: (1) copyright the software, and
> -(2) offer you this license which gives you legal permission to copy,
> -distribute and/or modify the software.
> -
> -  Also, for each author's protection and ours, we want to make certain
> -that everyone understands that there is no warranty for this free
> -software.  If the software is modified by someone else and passed on, we
> -want its recipients to know that what they have is not the original, so
> -that any problems introduced by others will not reflect on the original
> -authors' reputations.
> -
> -  Finally, any free program is threatened constantly by software
> -patents.  We wish to avoid the danger that redistributors of a free
> -program will individually obtain patent licenses, in effect making the
> -program proprietary.  To prevent this, we have made it clear that any
> -patent must be licensed for everyone's free use or not licensed at all.
> -
> -  The precise terms and conditions for copying, distribution and
> -modification follow.
> -
> -                    GNU GENERAL PUBLIC LICENSE
> -   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
> -
> -  0. This License applies to any program or other work which contains
> -a notice placed by the copyright holder saying it may be distributed
> -under the terms of this General Public License.  The "Program", below,
> -refers to any such program or work, and a "work based on the Program"
> -means either the Program or any derivative work under copyright law:
> -that is to say, a work containing the Program or a portion of it,
> -either verbatim or with modifications and/or translated into another
> -language.  (Hereinafter, translation is included without limitation in
> -the term "modification".)  Each licensee is addressed as "you".
> -
> -Activities other than copying, distribution and modification are not
> -covered by this License; they are outside its scope.  The act of
> -running the Program is not restricted, and the output from the Program
> -is covered only if its contents constitute a work based on the
> -Program (independent of having been made by running the Program).
> -Whether that is true depends on what the Program does.
> -
> -  1. You may copy and distribute verbatim copies of the Program's
> -source code as you receive it, in any medium, provided that you
> -conspicuously and appropriately publish on each copy an appropriate
> -copyright notice and disclaimer of warranty; keep intact all the
> -notices that refer to this License and to the absence of any warranty;
> -and give any other recipients of the Program a copy of this License
> -along with the Program.
> -
> -You may charge a fee for the physical act of transferring a copy, and
> -you may at your option offer warranty protection in exchange for a fee.
> -
> -  2. You may modify your copy or copies of the Program or any portion
> -of it, thus forming a work based on the Program, and copy and
> -distribute such modifications or work under the terms of Section 1
> -above, provided that you also meet all of these conditions:
> -
> -    a) You must cause the modified files to carry prominent notices
> -    stating that you changed the files and the date of any change.
> -
> -    b) You must cause any work that you distribute or publish, that in
> -    whole or in part contains or is derived from the Program or any
> -    part thereof, to be licensed as a whole at no charge to all third
> -    parties under the terms of this License.
> -
> -    c) If the modified program normally reads commands interactively
> -    when run, you must cause it, when started running for such
> -    interactive use in the most ordinary way, to print or display an
> -    announcement including an appropriate copyright notice and a
> -    notice that there is no warranty (or else, saying that you provide
> -    a warranty) and that users may redistribute the program under
> -    these conditions, and telling the user how to view a copy of this
> -    License.  (Exception: if the Program itself is interactive but
> -    does not normally print such an announcement, your work based on
> -    the Program is not required to print an announcement.)
> -
> -These requirements apply to the modified work as a whole.  If
> -identifiable sections of that work are not derived from the Program,
> -and can be reasonably considered independent and separate works in
> -themselves, then this License, and its terms, do not apply to those
> -sections when you distribute them as separate works.  But when you
> -distribute the same sections as part of a whole which is a work based
> -on the Program, the distribution of the whole must be on the terms of
> -this License, whose permissions for other licensees extend to the
> -entire whole, and thus to each and every part regardless of who wrote it.
> -
> -Thus, it is not the intent of this section to claim rights or contest
> -your rights to work written entirely by you; rather, the intent is to
> -exercise the right to control the distribution of derivative or
> -collective works based on the Program.
> -
> -In addition, mere aggregation of another work not based on the Program
> -with the Program (or with a work based on the Program) on a volume of
> -a storage or distribution medium does not bring the other work under
> -the scope of this License.
> -
> -  3. You may copy and distribute the Program (or a work based on it,
> -under Section 2) in object code or executable form under the terms of
> -Sections 1 and 2 above provided that you also do one of the following:
> -
> -    a) Accompany it with the complete corresponding machine-readable
> -    source code, which must be distributed under the terms of Sections
> -    1 and 2 above on a medium customarily used for software interchange; or,
> -
> -    b) Accompany it with a written offer, valid for at least three
> -    years, to give any third party, for a charge no more than your
> -    cost of physically performing source distribution, a complete
> -    machine-readable copy of the corresponding source code, to be
> -    distributed under the terms of Sections 1 and 2 above on a medium
> -    customarily used for software interchange; or,
> -
> -    c) Accompany it with the information you received as to the offer
> -    to distribute corresponding source code.  (This alternative is
> -    allowed only for noncommercial distribution and only if you
> -    received the program in object code or executable form with such
> -    an offer, in accord with Subsection b above.)
> -
> -The source code for a work means the preferred form of the work for
> -making modifications to it.  For an executable work, complete source
> -code means all the source code for all modules it contains, plus any
> -associated interface definition files, plus the scripts used to
> -control compilation and installation of the executable.  However, as a
> -special exception, the source code distributed need not include
> -anything that is normally distributed (in either source or binary
> -form) with the major components (compiler, kernel, and so on) of the
> -operating system on which the executable runs, unless that component
> -itself accompanies the executable.
> -
> -If distribution of executable or object code is made by offering
> -access to copy from a designated place, then offering equivalent
> -access to copy the source code from the same place counts as
> -distribution of the source code, even though third parties are not
> -compelled to copy the source along with the object code.
> -
> -  4. You may not copy, modify, sublicense, or distribute the Program
> -except as expressly provided under this License.  Any attempt
> -otherwise to copy, modify, sublicense or distribute the Program is
> -void, and will automatically terminate your rights under this License.
> -However, parties who have received copies, or rights, from you under
> -this License will not have their licenses terminated so long as such
> -parties remain in full compliance.
> -
> -  5. You are not required to accept this License, since you have not
> -signed it.  However, nothing else grants you permission to modify or
> -distribute the Program or its derivative works.  These actions are
> -prohibited by law if you do not accept this License.  Therefore, by
> -modifying or distributing the Program (or any work based on the
> -Program), you indicate your acceptance of this License to do so, and
> -all its terms and conditions for copying, distributing or modifying
> -the Program or works based on it.
> -
> -  6. Each time you redistribute the Program (or any work based on the
> -Program), the recipient automatically receives a license from the
> -original licensor to copy, distribute or modify the Program subject to
> -these terms and conditions.  You may not impose any further
> -restrictions on the recipients' exercise of the rights granted herein.
> -You are not responsible for enforcing compliance by third parties to
> -this License.
> -
> -  7. If, as a consequence of a court judgment or allegation of patent
> -infringement or for any other reason (not limited to patent issues),
> -conditions are imposed on you (whether by court order, agreement or
> -otherwise) that contradict the conditions of this License, they do not
> -excuse you from the conditions of this License.  If you cannot
> -distribute so as to satisfy simultaneously your obligations under this
> -License and any other pertinent obligations, then as a consequence you
> -may not distribute the Program at all.  For example, if a patent
> -license would not permit royalty-free redistribution of the Program by
> -all those who receive copies directly or indirectly through you, then
> -the only way you could satisfy both it and this License would be to
> -refrain entirely from distribution of the Program.
> -
> -If any portion of this section is held invalid or unenforceable under
> -any particular circumstance, the balance of the section is intended to
> -apply and the section as a whole is intended to apply in other
> -circumstances.
> -
> -It is not the purpose of this section to induce you to infringe any
> -patents or other property right claims or to contest validity of any
> -such claims; this section has the sole purpose of protecting the
> -integrity of the free software distribution system, which is
> -implemented by public license practices.  Many people have made
> -generous contributions to the wide range of software distributed
> -through that system in reliance on consistent application of that
> -system; it is up to the author/donor to decide if he or she is willing
> -to distribute software through any other system and a licensee cannot
> -impose that choice.
> -
> -This section is intended to make thoroughly clear what is believed to
> -be a consequence of the rest of this License.
> -
> -  8. If the distribution and/or use of the Program is restricted in
> -certain countries either by patents or by copyrighted interfaces, the
> -original copyright holder who places the Program under this License
> -may add an explicit geographical distribution limitation excluding
> -those countries, so that distribution is permitted only in or among
> -countries not thus excluded.  In such case, this License incorporates
> -the limitation as if written in the body of this License.
> -
> -  9. The Free Software Foundation may publish revised and/or new versions
> -of the General Public License from time to time.  Such new versions will
> -be similar in spirit to the present version, but may differ in detail to
> -address new problems or concerns.
> -
> -Each version is given a distinguishing version number.  If the Program
> -specifies a version number of this License which applies to it and "any
> -later version", you have the option of following the terms and conditions
> -either of that version or of any later version published by the Free
> -Software Foundation.  If the Program does not specify a version number of
> -this License, you may choose any version ever published by the Free Software
> -Foundation.
> -
> -  10. If you wish to incorporate parts of the Program into other free
> -programs whose distribution conditions are different, write to the author
> -to ask for permission.  For software which is copyrighted by the Free
> -Software Foundation, write to the Free Software Foundation; we sometimes
> -make exceptions for this.  Our decision will be guided by the two goals
> -of preserving the free status of all derivatives of our free software and
> -of promoting the sharing and reuse of software generally.
> -
> -                            NO WARRANTY
> -
> -  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
> -FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
> -OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
> -PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
> -OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
> -MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
> -TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
> -PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
> -REPAIR OR CORRECTION.
> -
> -  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
> -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
> -REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
> -INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
> -OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
> -TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
> -YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
> -PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
> -POSSIBILITY OF SUCH DAMAGES.
> -
> -                     END OF TERMS AND CONDITIONS
> -
> -            How to Apply These Terms to Your New Programs
> -
> -  If you develop a new program, and you want it to be of the greatest
> -possible use to the public, the best way to achieve this is to make it
> -free software which everyone can redistribute and change under these terms.
> -
> -  To do so, attach the following notices to the program.  It is safest
> -to attach them to the start of each source file to most effectively
> -convey the exclusion of warranty; and each file should have at least
> -the "copyright" line and a pointer to where the full notice is found.
> -
> -    <one line to give the program's name and a brief idea of what it does.>
> -    Copyright (C) <year>  <name of author>
> -
> -    This program is free software; you can redistribute it and/or modify
> -    it under the terms of the GNU General Public License as published by
> -    the Free Software Foundation; either version 2 of the License, or
> -    (at your option) any later version.
> -
> -    This program is distributed in the hope that it will be useful,
> -    but WITHOUT ANY WARRANTY; without even the implied warranty of
> -    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -    GNU General Public License for more details.
> -
> -    You should have received a copy of the GNU General Public License along
> -    with this program; if not, write to the Free Software Foundation, Inc.,
> -    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> -
> -Also add information on how to contact you by electronic and paper mail.
> -
> -If the program is interactive, make it output a short notice like this
> -when it starts in an interactive mode:
> -
> -    Gnomovision version 69, Copyright (C) year name of author
> -    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
> -    This is free software, and you are welcome to redistribute it
> -    under certain conditions; type `show c' for details.
> -
> -The hypothetical commands `show w' and `show c' should show the appropriate
> -parts of the General Public License.  Of course, the commands you use may
> -be called something other than `show w' and `show c'; they could even be
> -mouse-clicks or menu items--whatever suits your program.
> -
> -You should also get your employer (if you work as a programmer) or your
> -school, if any, to sign a "copyright disclaimer" for the program, if
> -necessary.  Here is a sample; alter the names:
> -
> -  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
> -  `Gnomovision' (which makes passes at compilers) written by James Hacker.
> -
> -  <signature of Ty Coon>, 1 April 1989
> -  Ty Coon, President of Vice
> -
> -This General Public License does not permit incorporating your program into
> -proprietary programs.  If your program is a subroutine library, you may
> -consider it more useful to permit linking proprietary applications with the
> -library.  If this is what you want to do, use the GNU Lesser General
> -Public License instead of this License.
> diff --git a/server/INSTALL b/server/INSTALL
> deleted file mode 100644
> index 2550dab..0000000
> --- a/server/INSTALL
> +++ /dev/null
> @@ -1,302 +0,0 @@
> -Installation Instructions
> -*************************
> -
> -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
> -2006, 2007, 2008, 2009 Free Software Foundation, Inc.
> -
> -   This file is free documentation; the Free Software Foundation gives
> -unlimited permission to copy, distribute and modify it.
> -
> -Basic Installation
> -==================
> -
> -   Briefly, the shell commands `./configure; make; make install' should
> -configure, build, and install this package.  The following
> -more-detailed instructions are generic; see the `README' file for
> -instructions specific to this package.
> -
> -   The `configure' shell script attempts to guess correct values for
> -various system-dependent variables used during compilation.  It uses
> -those values to create a `Makefile' in each directory of the package.
> -It may also create one or more `.h' files containing system-dependent
> -definitions.  Finally, it creates a shell script `config.status' that
> -you can run in the future to recreate the current configuration, and a
> -file `config.log' containing compiler output (useful mainly for
> -debugging `configure').
> -
> -   It can also use an optional file (typically called `config.cache'
> -and enabled with `--cache-file=config.cache' or simply `-C') that saves
> -the results of its tests to speed up reconfiguring.  Caching is
> -disabled by default to prevent problems with accidental use of stale
> -cache files.
> -
> -   If you need to do unusual things to compile the package, please try
> -to figure out how `configure' could check whether to do them, and mail
> -diffs or instructions to the address given in the `README' so they can
> -be considered for the next release.  If you are using the cache, and at
> -some point `config.cache' contains results you don't want to keep, you
> -may remove or edit it.
> -
> -   The file `configure.ac' (or `configure.in') is used to create
> -`configure' by a program called `autoconf'.  You need `configure.ac' if
> -you want to change it or regenerate `configure' using a newer version
> -of `autoconf'.
> -
> -The simplest way to compile this package is:
> -
> -  1. `cd' to the directory containing the package's source code and type
> -     `./configure' to configure the package for your system.
> -
> -     Running `configure' might take a while.  While running, it prints
> -     some messages telling which features it is checking for.
> -
> -  2. Type `make' to compile the package.
> -
> -  3. Optionally, type `make check' to run any self-tests that come with
> -     the package.
> -
> -  4. Type `make install' to install the programs and any data files and
> -     documentation.
> -
> -  5. You can remove the program binaries and object files from the
> -     source code directory by typing `make clean'.  To also remove the
> -     files that `configure' created (so you can compile the package for
> -     a different kind of computer), type `make distclean'.  There is
> -     also a `make maintainer-clean' target, but that is intended mainly
> -     for the package's developers.  If you use it, you may have to get
> -     all sorts of other programs in order to regenerate files that came
> -     with the distribution.
> -
> -  6. Often, you can also type `make uninstall' to remove the installed
> -     files again.
> -
> -Compilers and Options
> -=====================
> -
> -   Some systems require unusual options for compilation or linking that
> -the `configure' script does not know about.  Run `./configure --help'
> -for details on some of the pertinent environment variables.
> -
> -   You can give `configure' initial values for configuration parameters
> -by setting variables in the command line or in the environment.  Here
> -is an example:
> -
> -     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
> -
> -   *Note Defining Variables::, for more details.
> -
> -Compiling For Multiple Architectures
> -====================================
> -
> -   You can compile the package for more than one kind of computer at the
> -same time, by placing the object files for each architecture in their
> -own directory.  To do this, you can use GNU `make'.  `cd' to the
> -directory where you want the object files and executables to go and run
> -the `configure' script.  `configure' automatically checks for the
> -source code in the directory that `configure' is in and in `..'.
> -
> -   With a non-GNU `make', it is safer to compile the package for one
> -architecture at a time in the source code directory.  After you have
> -installed the package for one architecture, use `make distclean' before
> -reconfiguring for another architecture.
> -
> -   On MacOS X 10.5 and later systems, you can create libraries and
> -executables that work on multiple system types--known as "fat" or
> -"universal" binaries--by specifying multiple `-arch' options to the
> -compiler but only a single `-arch' option to the preprocessor.  Like
> -this:
> -
> -     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
> -                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
> -                 CPP="gcc -E" CXXCPP="g++ -E"
> -
> -   This is not guaranteed to produce working output in all cases, you
> -may have to build one architecture at a time and combine the results
> -using the `lipo' tool if you have problems.
> -
> -Installation Names
> -==================
> -
> -   By default, `make install' installs the package's commands under
> -`/usr/local/bin', include files under `/usr/local/include', etc.  You
> -can specify an installation prefix other than `/usr/local' by giving
> -`configure' the option `--prefix=PREFIX'.
> -
> -   You can specify separate installation prefixes for
> -architecture-specific files and architecture-independent files.  If you
> -pass the option `--exec-prefix=PREFIX' to `configure', the package uses
> -PREFIX as the prefix for installing programs and libraries.
> -Documentation and other data files still use the regular prefix.
> -
> -   In addition, if you use an unusual directory layout you can give
> -options like `--bindir=DIR' to specify different values for particular
> -kinds of files.  Run `configure --help' for a list of the directories
> -you can set and what kinds of files go in them.
> -
> -   If the package supports it, you can cause programs to be installed
> -with an extra prefix or suffix on their names by giving `configure' the
> -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
> -
> -Optional Features
> -=================
> -
> -   Some packages pay attention to `--enable-FEATURE' options to
> -`configure', where FEATURE indicates an optional part of the package.
> -They may also pay attention to `--with-PACKAGE' options, where PACKAGE
> -is something like `gnu-as' or `x' (for the X Window System).  The
> -`README' should mention any `--enable-' and `--with-' options that the
> -package recognizes.
> -
> -   For packages that use the X Window System, `configure' can usually
> -find the X include and library files automatically, but if it doesn't,
> -you can use the `configure' options `--x-includes=DIR' and
> -`--x-libraries=DIR' to specify their locations.
> -
> -Particular systems
> -==================
> -
> -   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
> -CC is not installed, it is recommended to use the following options in
> -order to use an ANSI C compiler:
> -
> -     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
> -
> -and if that doesn't work, install pre-built binaries of GCC for HP-UX.
> -
> -   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
> -parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
> -a workaround.  If GNU CC is not installed, it is therefore recommended
> -to try
> -
> -     ./configure CC="cc"
> -
> -and if that doesn't work, try
> -
> -     ./configure CC="cc -nodtk"
> -
> -   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
> -directory contains several dysfunctional programs; working variants of
> -these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
> -in your `PATH', put it _after_ `/usr/bin'.
> -
> -   On Haiku, software installed for all users goes in `/boot/common',
> -not `/usr/local'.  It is recommended to use the following options:
> -
> -     ./configure --prefix=/boot/common
> -
> -Specifying the System Type
> -==========================
> -
> -   There may be some features `configure' cannot figure out
> -automatically, but needs to determine by the type of machine the package
> -will run on.  Usually, assuming the package is built to be run on the
> -_same_ architectures, `configure' can figure that out, but if it prints
> -a message saying it cannot guess the machine type, give it the
> -`--build=TYPE' option.  TYPE can either be a short name for the system
> -type, such as `sun4', or a canonical name which has the form:
> -
> -     CPU-COMPANY-SYSTEM
> -
> -where SYSTEM can have one of these forms:
> -
> -     OS
> -     KERNEL-OS
> -
> -   See the file `config.sub' for the possible values of each field.  If
> -`config.sub' isn't included in this package, then this package doesn't
> -need to know the machine type.
> -
> -   If you are _building_ compiler tools for cross-compiling, you should
> -use the option `--target=TYPE' to select the type of system they will
> -produce code for.
> -
> -   If you want to _use_ a cross compiler, that generates code for a
> -platform different from the build platform, you should specify the
> -"host" platform (i.e., that on which the generated programs will
> -eventually be run) with `--host=TYPE'.
> -
> -Sharing Defaults
> -================
> -
> -   If you want to set default values for `configure' scripts to share,
> -you can create a site shell script called `config.site' that gives
> -default values for variables like `CC', `cache_file', and `prefix'.
> -`configure' looks for `PREFIX/share/config.site' if it exists, then
> -`PREFIX/etc/config.site' if it exists.  Or, you can set the
> -`CONFIG_SITE' environment variable to the location of the site script.
> -A warning: not all `configure' scripts look for a site script.
> -
> -Defining Variables
> -==================
> -
> -   Variables not defined in a site shell script can be set in the
> -environment passed to `configure'.  However, some packages may run
> -configure again during the build, and the customized values of these
> -variables may be lost.  In order to avoid this problem, you should set
> -them in the `configure' command line, using `VAR=value'.  For example:
> -
> -     ./configure CC=/usr/local2/bin/gcc
> -
> -causes the specified `gcc' to be used as the C compiler (unless it is
> -overridden in the site shell script).
> -
> -Unfortunately, this technique does not work for `CONFIG_SHELL' due to
> -an Autoconf bug.  Until the bug is fixed you can use this workaround:
> -
> -     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
> -
> -`configure' Invocation
> -======================
> -
> -   `configure' recognizes the following options to control how it
> -operates.
> -
> -`--help'
> -`-h'
> -     Print a summary of all of the options to `configure', and exit.
> -
> -`--help=short'
> -`--help=recursive'
> -     Print a summary of the options unique to this package's
> -     `configure', and exit.  The `short' variant lists options used
> -     only in the top level, while the `recursive' variant lists options
> -     also present in any nested packages.
> -
> -`--version'
> -`-V'
> -     Print the version of Autoconf used to generate the `configure'
> -     script, and exit.
> -
> -`--cache-file=FILE'
> -     Enable the cache: use and save the results of the tests in FILE,
> -     traditionally `config.cache'.  FILE defaults to `/dev/null' to
> -     disable caching.
> -
> -`--config-cache'
> -`-C'
> -     Alias for `--cache-file=config.cache'.
> -
> -`--quiet'
> -`--silent'
> -`-q'
> -     Do not print messages saying which checks are being made.  To
> -     suppress all normal output, redirect it to `/dev/null' (any error
> -     messages will still be shown).
> -
> -`--srcdir=DIR'
> -     Look for the package's source code in directory DIR.  Usually
> -     `configure' can determine that directory automatically.
> -
> -`--prefix=DIR'
> -     Use DIR as the installation prefix.  *Note Installation Names::
> -     for more details, including other options available for fine-tuning
> -     the installation locations.
> -
> -`--no-create'
> -`-n'
> -     Run the configure checks, but stop before creating any output
> -     files.
> -
> -`configure' also accepts some other, not widely useful, options.  Run
> -`configure --help' for more details.
> -
> diff --git a/server/Logger.py b/server/Logger.py
> deleted file mode 100644
> index e10ad25..0000000
> --- a/server/Logger.py
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -import sys
> -from datetime import datetime
> -
> -class Logger():
> -    def __init__(self, logfile, prefix):
> -        self.log = sys.stdout
> -        self.logopen = True
> -        self.prefix = prefix
> -
> -    def Log(self, grp, msg):
> -        if self.logopen == True:
> -            tstmp = datetime.today().strftime("%Y-%m-%d %H:%M:%S")
> -            self.log.write("%s [%s::%s]: %s\n" % (tstmp, self.prefix, grp, msg))
> -            self.log.flush()
> -
> -    def LogFD(self):
> -        return self.log.fileno()
> -
> diff --git a/server/Makefile.am b/server/Makefile.am
> deleted file mode 100644
> index fa53684..0000000
> --- a/server/Makefile.am
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#   Makefile.am - autotools configuration file
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -SUBDIRS = parser
> -dist_doc_DATA = parser/README.parser 	\
> -	sql/delta-1.0_1.1.sql 		\
> -	sql/delta-1.1_1.2.sql 		\
> -	sql/delta-1.2_1.3.sql 		\
> -	sql/delta-1.3_1.4.sql 		\
> -	sql/rteval-$(SQLSCHEMAVER).sql
> -
> -apache-rteval.conf:
> -if ENAB_MODPYTHON
> -	[ -n $(XMLRPCROOT) ] && $(srcdir)/gen_config.sh apache-rteval.conf $(XMLRPCROOT)/API1
> -else
> -	[ -n $(XMLRPCROOT) ] && $(srcdir)/gen_config.sh apache-rteval-wsgi.conf $(XMLRPCROOT)/API1
> -endif
> -
> -clean-local:
> -	-rm -f apache-rteval.conf *~
> -
> -dist-hook:
> -	cp $(srcdir)/gen_config.sh $(srcdir)/apache-rteval.conf.tpl $(srcdir)/apache-rteval-wsgi.conf.tpl $(distdir)/
> -	-rm -f $(distdir)/apache-rteval.conf
> -
> -if ENAB_XMLRPC
> -    xmlrpcdir = $(XMLRPCROOT)/API1
> -    BUILT_SOURCES = apache-rteval.conf
> -    dist_doc_DATA += README.xmlrpc apache-rteval.conf
> -    dist_xmlrpc_DATA = xmlrpc_API1.py rtevaldb.py database.py
> -if ENAB_MODPYTHON
> -    dist_xmlrpc_DATA += rteval_xmlrpc.py
> -else
> -    dist_xmlrpc_DATA += rteval_xmlrpc.wsgi
> -endif
> -endif
> diff --git a/server/README.xmlrpc b/server/README.xmlrpc
> deleted file mode 100644
> index 20bade2..0000000
> --- a/server/README.xmlrpc
> +++ /dev/null
> @@ -1,201 +0,0 @@
> -**
> -** Setting up a rteval XML-RPC server
> -**
> -
> -The XML-RPC server has the purpose of collecting information from
> -several rteval clients.  All the data in the summary.xml produced by the
> -rteval script is sent over to the XML-RPC server and registered in a
> -submission queue.  The XML-RPC server will then send back a submission
> -ID to the client.
> -
> -A parser daemon needs to run as well.  This daemon is connected to the
> -same database as the XML-RPC service and it will wait for new reports in
> -the submission queue to be parsed.  Look into the README.parser file
> -for more information on setting up the rteval_parserd process.
> -
> -Each parsed report will get a unique system ID which then can be used to
> -track how each system changes behaviour on different kernels.
> -
> -
> -**
> -** Requirements
> -**
> -   - Apache web server
> -   - mod_python-3.3.x OR mod_wsgi-3.2 or newer.
> -   - PostgreSQL v8.3 or later
> -   - rteval 1.12 or later
> -
> -
> -**
> -** Apache preparations
> -**
> -
> -The default path used for the rteval client is
> -
> -    http://{server hostname}/rteval/API1/
> -
> -If you have a HTTP setup which will follow this scheme, you do not
> -need to change any URLs at all.
> -
> -When installing the rteval-xmlrpc-1.4 RPM on a Fedora/RHEL based box,
> -Apache will be automatically configured.  But the Apache web server
> -will need to be restarted when you have setup the database.
> -
> -     # server httpd restart
> -
> -For manual installations, see the instructions under "Building and
> -installing from source" further down in this file.
> -
> -
> -**
> -** Database preparations
> -**
> -
> -** Setting up a new database
> -All reports are saved in a database.  If you have not used the
> -rteval-xmlrpc interface before, you need to create the needed database
> -user and database, execute the following command line:
> -
> -   # psql < /usr/share/doc/rteval-xmlrpc-1.5/rteval-1.4.sql
> -
> -This script will first create a database user called 'rtevxmlrpc' and
> -'rtevparser', assign default password before creating the database called
> -'rteval'.  The database will be populated with the needed tables and the
> -'rtevxmlrpc' and 'rtevparser' users will get the needed privileges to do
> -their job.
> -
> -Remember to also update the pg_hba.conf file in the PostgreSQL data
> -directory.  You need to allow the xmlrpc user access from the web
> -server.
> -
> -pg_hba.conf entry example:
> ------------------------------------------------------------------
> -# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
> -hostssl rteval	    rtevxmlrpc	127.0.0.1/32	      md5
> -hostssl rteval	    rtevparser	127.0.0.1/32	      md5
> ------------------------------------------------------------------
> -
> -The XML-RPC database connector will always try to connect via SSL.  To
> -modify the default password, connect to the database with psql and
> -issue this SQL command:
> -
> -   rteval=# ALTER USER rtevxmlrpc WITH ENCRYPTED PASSWORD '<newpassword>';
> -   rteval=# ALTER USER rtevparser WITH ENCRYPTED PASSWORD '<newpassword>';
> -
> -Or you can use the "safe mode" via the psql command:
> -
> -   rteval=# \password rtevxmlrpc
> -   Enter new password:
> -   Enter it again:
> -   rteval=# \password rtevparser
> -   Enter new password:
> -   Enter it again:
> -
> -
> -** Update an already existing database
> -If you already have an rteval database setup, you can run the delta
> -scripts to only do the pure database schema changes.
> -
> -To find out which schema version you using, do the following:
> -
> -   psql rteval -c "SELECT value FROM rteval_info WHERE key='sql_schema_ver'"
> -   value
> -   -------
> -     1.1
> -   (1 row)
> -
> -This indicates that the database is at the schema version 1.1.  If you do not
> -have the rteval_info table, you are for sure on schema version 1.0.
> -
> -* Update from SQL schema version 1.0 to 1.1
> -   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.0_1.1.sql
> -
> -* Update from SQL schema version 1.1 to 1.2
> -   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.1_1.2.sql
> -
> -* Update from SQL schema version 1.2 to 1.3
> -   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.2_1.3.sql
> -
> -* Update from SQL schema version 1.3 to 1.4
> -   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.3_1.4.sql
> -
> -You need to upgrade to the latest SQL schema available, and you must upgrade
> -sequentially through all the version in between your version and the latest.
> -
> -
> -**
> -** Building an installing from source
> -**
> -
> -The rteval-xmlrpc uses autotools to configure and build the
> -rteval-xmlrpc server and parser.
> -
> -   ./configure [--with-xmlrpc-webroot=<full path>]
> -
> -If the --with-xmlrpc-webroot is not provided, the mod_python files
> -needed for the XML-RPC server will not be installed, and only the
> -report parser will be built and installed.
> -
> -The path to the --with-xmlrpc-webroot must be a directory which the
> -Apache web server can access and serve files from (htdocs dir).  On
> -Fedora/RHEL this path should be:
> -
> -     ./configure --with-xmlrpc-webroot=/var/www/html/rteval
> -
> -With this done, you can now do the traditional 'make' and 'make
> -install'.  The default install prefix is /usr/local, unless you
> -changed it with --prefix=<path>.  You will then find the
> -rteval_parserd installed under /usr/local/bin/rteval_parserd and
> -README files, the SQL scripts and an Apache config file will be found
> -under /usr/local/share/doc/rteval-parser-1.5/
> -
> -The Apache configuration file can be copied into the configuration
> -directory Apache uses for its modules.  On RHEL/Fedora based
> -distributions, the apache-rteval.conf can be copied into
> -/etc/httpd/conf.d/
> -
> -For more information about the report parser (rteval-parserd), please
> -have a look at the README.parser file.
> -
> -
> -**
> -**  Configuration
> -**
> -
> -If you are not using any of the default values for
> -the database configuration, you need to create or modify the
> -/etc/rteval.conf file.  The XML-RPC service will read the
> -[xmlrpc_server] section in this file.
> -
> -This is the default values, if the xmlrpc_server section is not found
> -or parameters is not set.
> -
> -     # Paths
> -     datadir:     /var/lib/rteval
> -
> -     # Database parameters
> -     db_server:   localhost
> -     db_port:     5432
> -     database:    rteval
> -     db_username: xmlrpc
> -     db_password: rtevaldb
> -
> -The directory the datadir parameter points at must be writable to the
> -apache process.  Here copies of the received summary.xml files will be
> -saved before the rteval-parserd process parses the reports.
> -
> -
> -**
> -** Testing the setup
> -**
> -
> -For a quick test, dig up a summary.xml file from an earlier rteval run and
> -try sending it to the XML-RPC server by using the testclient_sendreportfile
> -script:
> -
> -     ./testclient_sendreportfile --report=summary.xml \
> -                                 --xmlrpc-submit=localhost
> -
> -See --help for more info on this utility.  Usually the log files of Apache and
> -PostgreSQL provides pretty good information if something goes wrong.
> -
> diff --git a/server/apache-rteval-wsgi.conf.tpl b/server/apache-rteval-wsgi.conf.tpl
> deleted file mode 100644
> index c6cf00f..0000000
> --- a/server/apache-rteval-wsgi.conf.tpl
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -# File: apache-rteval.conf
> -#
> -# Apache config entry to enable the rteval XML-RPC server
> -#
> -#   Copyright 2011 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -WSGISocketPrefix /var/run/wsgi
> -WSGIDaemonProcess rtevalxmlrpc processes=3 threads=15 python-path={_INSTALLDIR_}
> -WSGIScriptAlias /rteval/API1 {_INSTALLDIR_}/rteval_xmlrpc.wsgi
> -
> -<Directory "{_INSTALLDIR_}">
> -    Options Indexes FollowSymLinks
> -    AllowOverride None
> -    Order allow,deny
> -    Allow from all
> -
> -    WSGIProcessGroup rtevalxmlrpc
> -    WSGICallableObject rtevalXMLRPC_handler
> -</Directory>
> -
> diff --git a/server/apache-rteval.conf.tpl b/server/apache-rteval.conf.tpl
> deleted file mode 100644
> index f52754c..0000000
> --- a/server/apache-rteval.conf.tpl
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -# File: apache-rteval.conf
> -#
> -# Apache config entry to enable the rteval XML-RPC server
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -<Directory "{_INSTALLDIR_}">
> -    Options Indexes FollowSymLinks
> -    AllowOverride None
> -    Order allow,deny
> -    Allow from all
> -
> -    SetHandler python-program
> -    PythonHandler rteval_xmlrpc
> -    PythonDebug On
> -</Directory>
> -
> diff --git a/server/configure.ac b/server/configure.ac
> deleted file mode 100644
> index 504efbf..0000000
> --- a/server/configure.ac
> +++ /dev/null
> @@ -1,130 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#   configure.ac - autotools configuration file
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -#
> -#
> -#   To create the ./configure script you need to run 'autoreconf --install'
> -#
> -
> -AC_INIT([rteval-xmlrpc], [1.6], [davids@redhat.com])
> -SQLSCHEMAVER=1.5
> -AC_SUBST(SQLSCHEMAVER)
> -
> -AM_INIT_AUTOMAKE([-Wall -Werror foreign])
> -AC_PROG_CC
> -
> -AC_ARG_WITH([xmlrpc-webroot],
> -	[AS_HELP_STRING([--with-xmlrpc-webroot],
> -			[Location where to install the XML-RPC mod_python files])],
> -	[XMLRPCROOT="$withval"]
> -)
> -AC_SUBST(XMLRPCROOT)
> -AM_CONDITIONAL([ENAB_XMLRPC], [test ! -z $XMLRPCROOT])
> -
> -AC_ARG_ENABLE([mod-python],
> -        [AS_HELP_STRING([--with-mod-python],
> -                        [Enable the older mod_python support instead of mod_wsgi])],
> -        [MODPYTHON="$enableval"]
> -)
> -AC_SUBST(MODPYTHON)
> -AM_CONDITIONAL([ENAB_MODPYTHON], [test ! -z $MODPYTHON])
> -
> -# Simple macro to abort on missing functions in libraries
> -AC_DEFUN([AX_msgMISSINGFUNC], AC_MSG_ERROR([Could not find function in library.  Aborting]))
> -
> -# Save original CPPFLAGS
> -save_CPPFLAGS="$CPPFLAGS"
> -
> -# Check for libxml2
> -AC_CHECK_PROGS([XML2CFG], [xml2-config], [:])
> -if test "$XML2CFG" = :; then
> -   AC_MSG_ERROR([This package needs xml2-config from libxml2])
> -else
> -   AC_SUBST([LIBXML2_INC], [$(xml2-config --cflags)])
> -   CPPFLAGS="$CPPFLAGS $LIBXML2_INC"
> -fi
> -AC_CHECK_HEADERS([libxml/tree.h])
> -AC_CHECK_HEADERS([libxml/xmlsave.h])
> -AC_CHECK_HEADERS([libxml/xmlstring.h])
> -AC_CHECK_HEADERS([libxml/parser.h])
> -AC_CHECK_LIB([xml2],[xmlInitParser], [], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlCleanupParser], [DUMMY=], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlStrcmp], [DUMMY=], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlFreeDoc], [DUMMY=], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlSaveToBuffer], [DUMMY=], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlSaveTree], [DUMMY=], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlSaveClose], [DUMMY=], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlBufferFree], [DUMMY=], AX_msgMISSINGFUNC)
> -AC_CHECK_LIB([xml2],[xmlParseFile], [DUMMY=], AX_msgMISSINGFUNC)
> -
> -# Check for libxslt
> -AC_CHECK_PROGS([XSLTCFG], [xslt-config], [:])
> -if test "$XSLTCFG" = :; then
> -   AC_MSG_ERROR([This package needs xslt-config from libxslt])
> -else
> -   AC_SUBST([LIBXSLT_INC], [$(xslt-config --cflags)])
> -   CPPFLAGS="$CPPFLAGS $LIBXSLT_INC"
> -   LDFLAGS="$LDFLAGS -lexslt"
> -fi
> -AC_CHECK_HEADERS([libxslt/xsltInternals.h])
> -AC_CHECK_HEADERS([libxslt/transform.h])
> -AC_CHECK_HEADERS([libxslt/xsltutils.h])
> -AC_CHECK_LIB([xslt], [xsltInit], [], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([xslt], [xsltCleanupGlobals], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([xslt], [xsltParseStylesheetFile], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([xslt], [xsltApplyStylesheet], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([xslt], [xsltFreeStylesheet], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([exslt], [exsltRegisterAll], [DUMMY=], AX_msgMISSINGFUNC())
> -
> -# Check for libpq
> -AC_CHECK_PROGS([PGSQLCFG], [pg_config], [:])
> -if test "$PGSQLCFG" = :; then
> -   AC_MSG_ERROR([This package needs pg_config from PostgreSQL])
> -else
> -   AC_SUBST([LIBPQ_INC], [-I$(pg_config --includedir)])
> -   CPPFLAGS="$CPPFLAGS $LIBPQ_INC"
> -fi
> -AC_CHECK_HEADERS([libpq-fe.h])
> -AC_CHECK_LIB([pq], [PQsetdbLogin], [], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQstatus], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQexec], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQreset], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQfinish], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQprepare], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQexecPrepared], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQresultStatus], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQclear], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQconsumeInput], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQnotifies], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pq], [PQntuples], [DUMMY=], AX_msgMISSINGFUNC())
> -
> -# Restore the original CPPFLAGS
> -CPPFLAGS="$save_CPPFLAGS"
> -
> -# Check for POSIX features
> -AC_CHECK_HEADERS([mq.h])
> -AC_CHECK_LIB([rt], [mq_open], [], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([rt], [mq_close], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([rt], [mq_unlink], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([rt], [mq_send], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([rt], [mq_receive], [DUMMY=], AX_msgMISSINGFUNC())
> -
> -AC_CHECK_HEADERS([pthread.h])
> -AC_CHECK_LIB([pthread], [pthread_attr_init], [], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pthread], [pthread_attr_setdetachstate], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pthread], [pthread_attr_destroy], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pthread], [pthread_create], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pthread], [pthread_join], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pthread], [pthread_mutex_lock], [DUMMY=], AX_msgMISSINGFUNC())
> -AC_CHECK_LIB([pthread], [pthread_mutex_unlock], [DUMMY=], AX_msgMISSINGFUNC())
> -
> -# Back to needed autotools stuff
> -AC_CONFIG_SRCDIR([parser/rteval-parserd.c])
> -AC_CONFIG_HEADERS([parser/config.h])
> -AC_CONFIG_FILES([Makefile parser/Makefile])
> -AC_SUBST([AM_CXXFLAGS], [$CFLAGS])
> -AC_SUBST([AM_LDFLAGS], [$LDFLAGS])
> -
> -AC_OUTPUT
> diff --git a/server/database.py b/server/database.py
> deleted file mode 100644
> index 684f5ab..0000000
> --- a/server/database.py
> +++ /dev/null
> @@ -1,238 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   database.py
> -#   Library for processing results from XMLSQLparser and
> -#   query a PostgreSQL database based on the input data
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import psycopg2
> -import types
> -
> -class Database(object):
> -    def __init__(self, host=None, port=None, user=None, password=None, database=None,
> -                 noaction=False, debug=False):
> -        self.noaction = noaction
> -        self.debug = debug
> -
> -        dsnd = {}
> -        if host is not None:
> -            dsnd['host'] = host
> -            dsnd['sslmode'] = 'require'
> -        if port is not None:
> -            dsnd['port'] = str(port)
> -            dsnd['sslmode'] = 'require'
> -        if user is not None:
> -            dsnd['user'] = user
> -        if password is not None:
> -            dsnd['password'] = password
> -        if database is not None:
> -            dsnd['dbname'] = database
> -
> -        dsn = " ".join(["%s='%s'" %(k,v) for (k,v) in list(dsnd.items())])
> -        self.conn = not self.noaction and psycopg2.connect(dsn) or None
> -
> -
> -    def INSERT(self, sqlvars):
> -        #
> -        # Validate input data
> -        #
> -        if type(sqlvars) is not dict:
> -            raise AttributeError('Input parameter is not a Python dict')
> -
> -        try:
> -            sqlvars['table']
> -            sqlvars['fields']
> -            sqlvars['records']
> -        except KeyError as err:
> -            raise KeyError("Input dictionary do not contain a required element: %s").with_traceback(str(err))
> -
> -        if type(sqlvars['fields']) is not list:
> -            raise AttributeError("The 'fields' element is not a list of fields")
> -
> -        if type(sqlvars['records']) is not list:
> -            raise AttributeError("The 'records' element is not a list of fields")
> -
> -        if len(sqlvars['records']) == 0:
> -            return True
> -
> -        try:
> -            sqlvars['returning']
> -        except:
> -            sqlvars['returning'] = None
> -
> -        #
> -        # Build SQL template
> -        #
> -        sqlstub = "INSERT INTO %s (%s) VALUES (%s)" % (
> -            sqlvars['table'],
> -            ",".join(sqlvars['fields']),
> -            ",".join(["%%(%s)s" % f for f in sqlvars['fields']])
> -            )
> -
> -        # Get a database cursor
> -        curs = not self.noaction and self.conn.cursor() or None
> -
> -        #
> -        # Loop through all records and insert them into the database
> -        #
> -        results = []
> -        for rec in sqlvars['records']:
> -            if type(rec) is not list:
> -                raise AttributeError("The field values inside the 'records' list must be in a list")
> -
> -            # Create a dictionary, which will be used for the SQL operation
> -            values = {}
> -            for i in range(0, len(sqlvars['fields'])):
> -                values[sqlvars['fields'][i]] = rec[i]
> -
> -            if self.debug:
> -                print("SQL QUERY: ==> %s" % (sqlstub % values))
> -
> -            # Do the INSERT query
> -            if not self.noaction:
> -                curs.execute(sqlstub, values)
> -
> -            # If a return value for the INSERT is defined, catch that one
> -            if not self.noaction and sqlvars['returning']:
> -                # The psycopg2 do not handle INSERT INTO ... RETURNING column queries, so we can only use
> -                # this on tables with oid and do the look up that way
> -                vls = {"table": sqlvars['table'], 'colname': sqlvars['returning'], 'oid': str(curs.lastrowid)}
> -                curs.execute("SELECT %(colname)s FROM %(table)s WHERE oid='%(oid)s'" % vls)
> -                results.append(curs.fetchone()[0])
> -            else:
> -                results.append(True)
> -
> -        if not self.noaction:
> -            curs.close()
> -        return results
> -
> -
> -    def DELETE(self, table, where):
> -        try:
> -            sql = "DELETE FROM %s WHERE %s" % (
> -                table,
> -                " AND ".join(["%s = %%(%s)s" % (k,k) for (k,v) in list(where.items())])
> -                )
> -
> -            if self.debug:
> -                print("SQL QUERY ==> %s" % (sql % where))
> -
> -            if not self.noaction:
> -                curs = self.conn.cursor()
> -                curs.execute(sql, where)
> -                delrows = curs.rowcount
> -                curs.close()
> -                return delrows
> -            else:
> -                return 0
> -        except Exception as err:
> -            raise Exception("** SQL ERROR ** %s\n** SQL ERROR ** Message: %s" % ((sql % where), str(err)))
> -
> -    def SELECT(self, table, fields, joins=None, where=None):
> -        curs = not self.noaction and self.conn.cursor() or None
> -
> -        # Query
> -        try:
> -            sql = "SELECT %s FROM %s %s %s" % (
> -                ",".join(fields),
> -                table,
> -                joins and "%s" % joins or "",
> -                where and "WHERE %s" % " AND ".join(["%s = %%(%s)s" % (k,k) for (k,v) in list(where.items())] or "")
> -                )
> -            if self.debug:
> -                print("SQL QUERY: ==> %s" % (sql % where))
> -            if not self.noaction:
> -                curs.execute(sql, where)
> -            else:
> -                # If no action is setup (mainly for debugging), return empty result set
> -                return {"table": table, "fields": [], "records": []}
> -        except Exception as err:
> -            raise Exception("** SQL ERROR *** %s\n** SQL ERROR ** Message: %s" % (where and (sql % where) or sql, str(err)))
> -
> -        # Extract field names
> -        fields = []
> -        for fn in curs.description:
> -            fields.append(fn[0])
> -
> -        # Extract records
> -        records = []
> -        for dbrec in curs.fetchall():
> -            values = []
> -            for val in dbrec:
> -                values.append(val)
> -            records.append(values)
> -
> -        curs.close()
> -        if self.debug:
> -            print("database::SELECT() result ** Fields: %s\nRecords: %s" % (fields, records))
> -        return {"table": table, "fields": fields, "records": records}
> -
> -    def COMMIT(self):
> -        # Commit the work
> -        if not self.noaction:
> -            self.conn.commit()
> -
> -    def ROLLBACK(self):
> -        # Abort / rollback the current work
> -        if not self.noaction:
> -            self.conn.rollback()
> -
> -
> -    def GetValue(self, dbres, recidx, field):
> -        "Helper function to easy extract a field from a record set"
> -
> -        # Check that input data good
> -        if type(dbres) is not dict:
> -            raise AttributeError('Database result parameter is not a Python dict')
> -
> -        try:
> -            dbres['table']
> -            dbres['fields']
> -            dbres['records']
> -        except KeyError as err:
> -            raise KeyError("Database result parameter do not contain a required element: %s").with_traceback(str(err))
> -
> -        if type(dbres['fields']) is not list:
> -            raise AttributeError("The 'fields' element is not a list of fields")
> -
> -        if type(dbres['records']) is not list:
> -            raise AttributeError("The 'records' element is not a list of fields")
> -
> -        # Return None when we're going out of boundaries
> -        if recidx >= len(dbres['records']):
> -            return None
> -
> -        if type(field) == bytes:
> -            # Find the field index of the field name in the records set
> -            try:
> -                fidx = dbres['fields'].index(field)
> -            except ValueError:
> -                raise Exception("Field '%s' is not found in the database result" % field)
> -        elif type(field) == int:
> -            # If the field value is integer, assume it is the numeric field id
> -            if field >= len(dbres['fields']):
> -                raise Exception("Field id '%i' is too high.  No field available" % field)
> -            fidx = field
> -
> -        # Return the value
> -        return dbres['records'][recidx][fidx]
> -
> -
> -    def NumTuples(self, dbres):
> -        # Check that input data good
> -        if type(dbres) is not dict:
> -            raise AttributeError('Database result parameter is not a Python dict')
> -
> -        try:
> -            dbres['table']
> -            dbres['fields']
> -            dbres['records']
> -        except KeyError as err:
> -            raise KeyError("Database result parameter do not contain a required element: %s").with_traceback(str(err))
> -
> -        if type(dbres['records']) is not list:
> -            raise AttributeError("The 'records' element is not a list of fields")
> -
> -        return len(dbres['records'])
> diff --git a/server/gen_config.sh b/server/gen_config.sh
> deleted file mode 100755
> index 335176f..0000000
> --- a/server/gen_config.sh
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -#/bin/sh
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -
> -APACHECONF="$1"
> -INSTALLDIR="$2"
> -
> -echo "Creating Apache config file: apache-rteval.conf"
> -escinstpath="$(echo ${INSTALLDIR} | sed -e 's/\//\\\\\//g')"
> -expr=$(echo "s/{_INSTALLDIR_}/${escinstpath}/")
> -eval "sed -e ${expr} ${APACHECONF}.tpl" > apache-rteval.conf
> -echo "Copy the apache apache-rteval.conf into your Apache configuration"
> -echo "directory and restart your web server"
> -echo
> -
> diff --git a/server/parser/Makefile.am b/server/parser/Makefile.am
> deleted file mode 100644
> index 02b3326..0000000
> --- a/server/parser/Makefile.am
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#   Makefile.am - autotools configuration file
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -# Generic include files, found by ./configure
> -AM_CPPFLAGS = $(LIBXML2_INC) $(LIBXSLT_INC) $(LIBPQ_INC) -std=gnu89
> -
> -# What is required to build rteval_parserd
> -bin_PROGRAMS = rteval-parserd
> -rteval_parserd_SOURCES = argparser.c argparser.h 			 \
> -	configparser.c configparser.h 					 \
> -	eurephia_nullsafe.c eurephia_nullsafe.h eurephia_values_struct.h \
> -	eurephia_values.c eurephia_values.h 				 \
> -	eurephia_xml.c eurephia_xml.h 					 \
> -	log.c log.h  							 \
> -	parsethread.c parsethread.h threadinfo.h			 \
> -	pgsql.c pgsql.h 						 \
> -	sha1.c sha1.h							 \
> -	xmlparser.c xmlparser.h	             				 \
> -	rteval-parserd.c statuses.h
> -
> -# Don't build, only install
> -xsltdir=$(datadir)/rteval
> -dist_xslt_DATA = xmlparser.xsl
> -
> -# Copy init script and config file example to the docs dir
> -initscriptdir=$(docdir)/initscripts
> -dist_initscript_DATA = rteval-parserd.init rteval-parserd.sysconfig
> diff --git a/server/parser/README.parser b/server/parser/README.parser
> deleted file mode 100644
> index 2618552..0000000
> --- a/server/parser/README.parser
> +++ /dev/null
> @@ -1,204 +0,0 @@
> -**
> -**  rteval-parsed - the rteval XML report parser
> -**
> -
> -The purpose of the daemon is to off load the web server from the heavy duty
> -work of parsing and processing the rteval XML reports.  The XML-RPC server
> -will receive the reports and put the files in a queue directory on the
> -file system and register the the submission in the database.  This will notify
> -the rteval-parsed that a new report has been received and it will start
> -processing that file independently of the web/XML-RPC server.
> -
> -
> -** Installing the software
> -
> -  !! Please install also the rteval-xmlrpc package and read the !!
> -  !! README.xmlrpc file also for setting up and preparing the   !!
> -  !! database which the rteval-parserd program will be using.   !!
> -  !! This file will also contain information regardingupgrading !!
> -  !! the database.                                              !!
> -
> -When installing this application from a binary package, like RPM
> -files on Fedora/RHEL based boxes, you should have the rteval-parserd
> -in your $PATH.  Otherwise, when installing from sources, the configure
> -script defines the default paths.
> -
> -
> -** Configure rteval-parsed
> -
> -When starting the rteval-parserd via the init.d script (or via the 'service'
> -command on RHEL/Fedora distributions) it will use the values configured in
> -/etc/sysconfig/rteval-parserd.
> -
> -The available parameters are:
> -
> -    - NUM_THREADS
> -      When this is not defined, the default behaviour is to use the number
> -      of available CPU cores.  The init.d script will detect this
> -      automatically.
> -
> -    - LOG
> -      This defines how logging will be done.  See the rteval-parserd
> -      arguments description further down in the document for more
> -      information.
> -
> -    - LOGLEVEL
> -      Defines how verbose the logging will be.  See the rteval-parserd
> -      arguments description further down in the document for more
> -      information.
> -
> -    - CONFIGFILE
> -      The default configuration file rteval-parserd will try to read is
> -      /etc/rteval.conf.  See the next paragraph for more information about
> -      this file.  This argument let you override the default config file.
> -
> -    - PIDFILE
> -      Defines where the init.d script will put the PID file for the
> -      rteval-parserd process.  The default is /var/run/rteval-parserd.pid
> -
> -This daemon uses the same configuration file as the rest of the rteval program
> -suite, /etc/rteval.conf.  It will parse the section named 'xmlrpc_parser'.
> -
> -The default values are:
> -
> -  - xsltpath: /usr/share/rteval
> -    Defines where it can find the xmlparser.xsl XSLT template
> -
> -  - db_server: localhost
> -    Which database server to connect to
> -
> -  - db_port: 5432
> -    Which port to use for the database connection
> -
> -  - database: rteval
> -    Which database to make use of.
> -
> -  - db_username: rtevparser
> -    Which user name to use for the connection
> -
> -  - db_password: rtevaldb_parser
> -    Which password to use for the authentication
> -
> -  - reportdir: /var/lib/rteval/report
> -    Where to save the parsed reports
> -
> -  - threads: 4
> -    Number of worker threads.  This defines how many reports you will
> -    process in parallel.  The recommended number here is the number
> -    of available CPU cores, as having a higher thread number often
> -    punishes the performance.  The default value is 4 when rteval-parserd
> -    is started directly.  When started via the init.d script, the default
> -    is to start one thread per CPU core.
> -
> -  - max_report_size: 2097152
> -    Maximum file size of reports which the parser will process.  The
> -    default value is 2MB.  The value must be given in bytes.  Remember
> -    that this value is per thread, and that XML and XSLT processing can
> -    be quite memory hungry.  If this value is set too high or you have too
> -    many worker threads, your system might become unresponsive for a while
> -    and the parser might be killed by the kernel (OOM).
> -
> -  - measurement_tables: cyclic_statistics, cyclic_histogram, hwlatdetect_summary, hwlatdetect_samples
> -    Declares which measurement results will be parsed and stored in the
> -    database.  These names are referring to table definitions in the
> -    xmlparser.xsl XSLT template.  The definitions in this template tells
> -    rteval-parsed which data to extract from the rteval summary.xml report
> -    and where and how to store it in the database.
> -
> -
> -** rteval-parserd arguments
> -
> -  -d | --daemon                    Run as a daemon
> -  -l | --log        <log dest>     Where to put log data
> -  -L | --log-level  <verbosity>    What to log
> -  -f | --config     <config file>  Which configuration file to use
> -  -t | --threads    <num. threads> How many worker threads to start (def: 4)
> -  -h | --help                      This help screen
> -
> -- Configuration file
> -By default the program will look for /etc/rteval.conf.  This can be
> -overridden by using --config <config file>.
> -
> -- Logging
> -When the program is started as a daemon, it will log to syslog by default.
> -The default log level is 'info'.  When not started as a daemon, all logging
> -will go to stderr by default.
> -
> -The --log argument takes either 'destination' or a file name.  Unknown
> -destinations are treated as filenames.  Valid 'destinations' are:
> -
> -    stderr:             - Log to stderr
> -    stdout:             - Log to stdout
> -    syslog:[facility]   - Log to syslog
> -    <file name>         - Log to given file
> -
> -For syslog the default facility is 'daemon', but can be overridden by using
> -one of the following facility values:
> -    daemon, user and local0 to local7
> -
> -Log verbosity is set by the --log-level.  The valid values here are:
> -
> -    emerg, emergency    - Only log errors which causes the program to stop
> -    alert               - Incidents which needs immediate attention
> -    crit, critical      - Unexpected incidents which is not urgent
> -    err, error          - Parsing errors.  Issues with input data
> -    warn, warning       - Incidents which may influence performance
> -    notice              - Less important warnings
> -    info                - General run information
> -    debug               - Detailed run information, incl. thread operation
> -
> -- Threads
> -By default, the daemon will use five threads.  One for the main threads which
> -processes the submission queue and notifies the working threads.  The four
> -other threads are worker threads, which will process the received reports.
> -
> -Each of the worker threads will have its own connection to the database.  This
> -connection will be connected to the database as long as the daemon is running.
> -It is therefore important that you do not have more worker threads than
> -available database connections.
> -
> -
> -** POSIX Message Queue
> -
> -The daemon makes use of POSIX MQ for distributing work to the worker threads.
> -Each thread lives independently and polls the queue regularly for more work.
> -As the POSIX MQ has a pretty safe mechanism of not duplicating messages in the
> -implementation, no other locking facility is needed.
> -
> -On Linux, the default value for maximum messages in the queue are set to 10.
> -If you receive a lot of reports and the threads do not process the queue
> -quickly enough, it will fill up pretty quickly.  If the queue is filled up,
> -the main thread which populates the message queue will politely go to sleep
> -for one minute before attempting to send new messages.  To avoid this, consider
> -to increase the queue size by modifying /proc/sys/fs/mqueue/msg_max.
> -
> -When the daemon initialises itself, it will read this file to make sure it
> -uses the queue to the maximum, but not beyond that.
> -
> -
> -** PostgreSQL features
> -
> -The daemon depends on the PostgreSQL database.  It is written with an
> -abstraction layer so it should, in theory, be possible to easily adopt it to
> -different database implementation.
> -
> -In the current implementation, it makes use of PostgreSQL's LISTEN, NOTIFY and
> -UNLISTEN features.  A trigger is enabled on the submission queue table, which
> -sends a NOTIFY whenever a record is inserted into the table.  The rteval-parser
> -daemon listens for these notifications, and will immediately poll the table
> -upon such a notification.
> -
> -Whenever a notification is received, it will always parse all unprocessed
> -reports.  In addition it will also only listen for notifications when there
> -are no unprocessed reports.
> -
> -The core PostgreSQL implementation is only done in pgsql.[ch], which provides an
> -abstract API layer for the rest of the parser daemon.
> -
> -
> -** Submission queue status codes
> -
> -In the rteval database's submissionqueue table there is a status field.  The
> -daemon will only consider records with status == 0 for processing.  It do not
> -consider any other fields.  For a better understanding of the different status
> -codes, look into the file statuses.h.
> diff --git a/server/parser/argparser.c b/server/parser/argparser.c
> deleted file mode 100644
> index 70d6961..0000000
> --- a/server/parser/argparser.c
> +++ /dev/null
> @@ -1,140 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   argparser.c
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Thu Oct 22 13:58:46 2009
> - *
> - * @brief  Generic argument parser
> - *
> - */
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <getopt.h>
> -#include <eurephia_values.h>
> -#include <eurephia_nullsafe.h>
> -
> -
> -/**
> - * Print a help screen to stdout
> - */
> -void usage() {
> -	printf("rteval-parserd:  Parses new reports recieved via XML-RPC\n"
> -	       "\n"
> -	       "This program will wait for changes to the rteval 'submissionqueue' table.\n"
> -	       "When a new report is registered here, it will send this report to one of\n"
> -	       "the worker threads which will insert the parsed result into the database.\n"
> -	       "\n"
> -	       "** Program arguments:\n"
> -	       "  -d | --daemon                    Run as a daemon\n"
> -	       "  -l | --log        <log dest>     Where to put log data\n"
> -	       "  -L | --log-level  <verbosity>    What to log\n"
> -	       "  -f | --config     <config file>  Which configuration file to use\n"
> -	       "  -t | --threads    <num. threads> How many worker threads to start (def: 4)\n"
> -	       "  -h | --help                      This help screen\n"
> -	       "\n"
> -	       "** Configuration file\n"
> -	       "By default the program will look for /etc/rteval.conf.  This can be\n"
> -	       "overriden by using --config <config file>.\n"
> -	       "\n"
> -	       "** Logging\n"
> -	       "When the program is started as a daemon, it will log to syslog by default.\n"
> -	       "The default log level is 'info'.  When not started as a daemon, all logging\n"
> -	       "will go to stderr by default.\n"
> -	       "\n"
> -	       "The --log argument takes either 'destination' or a file name.  Unknown\n"
> -	       "destinations are treated as filenames.  Valid 'destinations' are:\n"
> -	       "\n"
> -	       "    stderr:             - Log to stderr\n"
> -	       "    stdout:             - Log to stdout\n"
> -	       "    syslog:[facility]   - Log to syslog\n"
> -	       "    <file name>         - Log to given file\n"
> -	       "\n"
> -	       "For syslog the default facility is 'daemon', but can be overriden by using\n"
> -	       "one of the following facility values:\n"
> -	       "    daemon, user and local0 to local7\n"
> -	       "\n"
> -	       "Log verbosity is set by the --log-level.  The valid values here are:\n"
> -	       "\n"
> -	       "    emerg, emergency    - Only log errors which causes the program to stop\n"
> -	       "    alert               - Incidents which needs immediate attention\n"
> -	       "    crit, critical      - Unexpected incidents which is not urgent\n"
> -	       "    err, error          - Parsing errors.  Issues with input data\n"
> -	       "    warn, warning       - Incidents which may influence performance\n"
> -	       "    notice              - Less important warnings\n"
> -	       "    info                - General run information\n"
> -	       "    debug               - Detailed run information, incl. thread operations\n"
> -	       "\n"
> -	       );
> -}
> -
> -
> -/**
> - * Parses program arguments and puts the recognised arguments into an eurephiaVALUES struct.
> - *
> - * @param argc   argument counter
> - * @param argv   argument string table
> - *
> - * @return Returns a pointer to an eurephiaVALUES struct.  On failure, the program halts.
> - */
> -eurephiaVALUES *parse_arguments(int argc, char **argv) {
> -	eurephiaVALUES *args = NULL;
> -	int optidx, c;
> -	static struct option long_opts[] = {
> -		{"log", 1, 0, 'l'},
> -		{"log-level", 1, 0, 'L'},
> -		{"config", 1, 0, 'f'},
> -		{"threads", 1, 0, 't'},
> -		{"daemon", 0, 0, 'd'},
> -		{"help", 0, 0, 'h'},
> -		{0, 0, 0, 0}
> -	};
> -
> -	args = eCreate_value_space(NULL, 21);
> -	eAdd_value(args, "daemon", "0");
> -	eAdd_value(args, "configfile", "/etc/rteval.conf");
> -	eAdd_value(args, "threads", "4");
> -
> -	while( 1 ) {
> -		optidx = 0;
> -		c = getopt_long(argc, argv, "l:L:f:t:dh", long_opts, &optidx);
> -		if( c == -1 ) {
> -			break;
> -		}
> -
> -		switch( c ) {
> -		case 'l':
> -			eUpdate_value(args, "log", optarg, 1);
> -			break;
> -		case 'L':
> -			eUpdate_value(args, "loglevel", optarg, 1);
> -			break;
> -		case 'f':
> -			eUpdate_value(args, "configfile", optarg, 0);
> -			break;
> -		case 't':
> -			eUpdate_value(args, "threads", optarg, 0);
> -			break;
> -		case 'd':
> -			eUpdate_value(args, "daemon", "1", 0);
> -			break;
> -		case 'h':
> -			usage();
> -			exit(0);
> -		}
> -	}
> -
> -	// If logging is not configured, and it is not run as a daemon
> -	// -> log to stderr:
> -	if( (eGet_value(args, "log") == NULL)
> -	    && (atoi_nullsafe(eGet_value(args, "daemon")) == 0) ) {
> -		eAdd_value(args, "log", "stderr:");
> -	}
> -
> -	return args;
> -}
> diff --git a/server/parser/argparser.h b/server/parser/argparser.h
> deleted file mode 100644
> index 5325505..0000000
> --- a/server/parser/argparser.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   argparser.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Thu Oct 22 13:58:46 2009
> - *
> - * @brief  Generic argument parser
> - *
> - */
> -
> -#ifndef _RTEVAL_ARGPARSER_h
> -#define _RTEVAL_ARGPARSER_h
> -
> -eurephiaVALUES *parse_arguments(int argc, char **argv);
> -
> -#endif
> diff --git a/server/parser/configparser.c b/server/parser/configparser.c
> deleted file mode 100644
> index 4eaf318..0000000
> --- a/server/parser/configparser.c
> +++ /dev/null
> @@ -1,171 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*  configparser.c - Read and parse config files
> - *
> - *  This code is based on the fragments from the eurephia project.
> - *
> - *  GPLv2 Copyright (C) 2009
> - *  David Sommerseth <davids@redhat.com>
> - *
> - */
> -
> -/**
> - * @file   configparser.c
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   2009-10-01
> - *
> - * @brief  Config file parser
> - *
> - */
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <sys/stat.h>
> -#include <assert.h>
> -
> -#include <eurephia_nullsafe.h>
> -#include <eurephia_values.h>
> -#include <configparser.h>
> -#include <log.h>
> -
> -/**
> - * Parse one single configuration line into a eurephiaVALUES key/value pair.  It will also ignore
> - * comment lines, and also remove the comments on the line of the configuration line so that only
> - * the key/value information is extracted.
> - *
> - * @param line Input configuration line
> - *
> - * @return eurephiaVALUES pointer containing the parsed result.  On error or if no valid config
> - * line was found, NULL is returned.
> - */
> -static inline eurephiaVALUES *parse_config_line(LogContext *log, const char *line) {
> -        char *cp = NULL, *key = NULL, *val = NULL, *ptr = NULL;;
> -        eurephiaVALUES *ret = NULL;
> -
> -        if( *line == '#' ) {
> -                return NULL;
> -        }
> -
> -        cp = strdup(line);
> -        key = cp;
> -        val = strpbrk(cp, "=:");
> -        if( val == NULL ) {
> -                free_nullsafe(cp);
> -                return NULL;
> -        }
> -        *val = '\0'; val++;
> -
> -        // Discard comments at the end of a line
> -        if( (ptr = strpbrk(val, "#")) != NULL ) {
> -                *ptr = '\0';
> -        }
> -
> -        // Left trim
> -        while( ((*key == 0x20) || (*key == 0x0A) || (*key == 0x0D)) ) {
> -                key++;
> -        }
> -        while( ((*val == 0x20) || (*val == 0x0A) || (*val == 0x0D)) ) {
> -                val++;
> -        }
> -
> -        // Right trim
> -        ptr = key + strlen_nullsafe(key) - 1;
> -        while( ((*ptr == 0x20) || (*ptr == 0x0A) || (*ptr == 0x0D)) && (ptr > key) ) {
> -                ptr--;
> -        }
> -        ptr++;
> -        *ptr = '\0';
> -
> -        ptr = val + strlen_nullsafe(val) - 1;
> -        while( ((*ptr == 0x20) || (*ptr == 0x0A) || (*ptr == 0x0D)) && (ptr > val) ) {
> -                ptr--;
> -        }
> -        ptr++;
> -        *ptr = '\0';
> -
> -        // Put key/value into a eurephiaVALUES struct and return it
> -        ret = eCreate_value_space(log, 20);
> -        ret->key = strdup(key);
> -        ret->val = strdup(val);
> -
> -        free_nullsafe(cp);
> -        return ret;
> -}
> -
> -
> -static inline eurephiaVALUES *default_cfg_values(LogContext *log, eurephiaVALUES *prgargs) {
> -	eurephiaVALUES *cfg = NULL, *ptr = NULL;
> -
> -	cfg = eCreate_value_space(log, 20);
> -	eAdd_value(cfg, "datadir", "/var/lib/rteval");
> -	eAdd_value(cfg, "xsltpath", "/usr/share/rteval");
> -	eAdd_value(cfg, "db_server", "localhost");
> -	eAdd_value(cfg, "db_port", "5432");
> -	eAdd_value(cfg, "database", "rteval");
> -	eAdd_value(cfg, "db_username", "rtevparser");
> -	eAdd_value(cfg, "db_password", "rtevaldb_parser");
> -	eAdd_value(cfg, "reportdir", "/var/lib/rteval/reports");
> -	eAdd_value(cfg, "max_report_size", "2097152"); // 2MB
> -	eAdd_value(cfg, "measurement_tables", "cyclic_statistics, cyclic_histogram, hwlatdetect_summary, hwlatdetect_samples");
> -
> -	// Copy over the arguments to the config, update existing settings
> -	for( ptr = prgargs; ptr; ptr = ptr->next ) {
> -		eUpdate_value(cfg, ptr->key, ptr->val, 1);
> -	}
> -
> -	return cfg;
> -}
> -
> -/**
> - * Parses a section of a config file and puts it into an eurephiaVALUES key/value stack
> - *
> - * @param log     Initialised log context
> - * @param prgargs Parsed command line arguments (see parse_arguments())
> - * @param section Section to read from the config file
> - *
> - * @return Returns a pointer to an eurephiaVALUES stack containing the configuration on success,
> - *         otherwise NULL.
> - */
> -eurephiaVALUES *read_config(LogContext *log, eurephiaVALUES *prgargs, const char *section) {
> -        FILE *fp = NULL;
> -        char  *buf = NULL, *sectmatch = NULL, *cfgname = NULL;
> -	int sectfound = 0;
> -        eurephiaVALUES *cfg = NULL;
> -        struct stat fi;
> -
> -	cfgname = eGet_value(prgargs, "configfile");
> -        if( stat(cfgname, &fi) == -1 ) {
> -		writelog(log, LOG_EMERG, "Could not open the config file: %s", cfgname);
> -                return NULL;
> -        }
> -
> -        if( (fp = fopen(cfgname, "r")) == NULL ) {
> -                writelog(log, LOG_EMERG, "Could not open the config file: %s", cfgname);
> -                return NULL;
> -        }
> -
> -        buf = (char *) malloc_nullsafe(log, fi.st_size+2);
> -	sectmatch = (char *) malloc_nullsafe(log, strlen_nullsafe(section)+4);
> -	sprintf(sectmatch, "[%s]", section);
> -
> -        cfg = default_cfg_values(log, prgargs);
> -	writelog(log, LOG_DEBUG, "Reading config file: %s", cfgname);
> -        while( fgets(buf, fi.st_size, fp) != NULL ) {
> -		if( strncmp(buf, "[", 1) == 0 ) {
> -			sectfound = (!sectfound && (strncmp(buf, sectmatch, strlen(sectmatch)) == 0));
> -			continue;
> -		}
> -
> -		if( sectfound ) {
> -			eurephiaVALUES *prm = parse_config_line(log, buf);
> -			if( prm != NULL ) {
> -				cfg = eUpdate_valuestruct(cfg, prm, 1);
> -			}
> -		}
> -        };
> -        free_nullsafe(buf);
> -	free_nullsafe(sectmatch);
> -        fclose(fp); fp = NULL;
> -
> -        return cfg;
> -}
> diff --git a/server/parser/configparser.h b/server/parser/configparser.h
> deleted file mode 100644
> index 033ae26..0000000
> --- a/server/parser/configparser.h
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*  configparser.h - Read and parse config files
> - *
> - *  This code is based on the fragments from the eurephia project.
> - *
> - *  GPLv2 Copyright (C) 2009
> - *  David Sommerseth <davids@redhat.com>
> - *
> - */
> -
> -/**
> - * @file   configparser.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   2009-10-01
> - *
> - * @brief  Config file parser
> - *
> - */
> -
> -#ifndef _CONFIGPARSER_H
> -#define _CONFIGPARSER_H
> -
> -eurephiaVALUES *read_config(LogContext *log, eurephiaVALUES *prgargs, const char *section);
> -
> -#endif
> diff --git a/server/parser/eurephia_nullsafe.c b/server/parser/eurephia_nullsafe.c
> deleted file mode 100644
> index 5abda69..0000000
> --- a/server/parser/eurephia_nullsafe.c
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/* eurephia_nullsafe.c
> - *
> - *  standard C string functions, which is made NULL safe by checking
> - *  if input value is NULL before performing the action.
> - *
> - *  This version is modified to work outside the eurephia project.
> - *
> - *  GPLv2 only - Copyright (C) 2009
> - *               David Sommerseth <dazo@users.sourceforge.net>
> - *
> - */
> -
> -/**
> - * @file   eurephia_nullsafe.c
> - * @author David Sommerseth <dazo@users.sourceforge.net>
> - * @date   2009-09-07
> - *
> - * @brief standard C string functions, which is made NULL safe by checking
> - *        if input value is NULL before performing the action.
> - *
> - */
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -
> -#include <log.h>
> -
> -#if __GNUC__ >= 3
> -#define __malloc__ __attribute__((malloc))
> -#else /* If not GCC 3 or newer, disable optimisations */
> -#define __malloc__
> -#endif
> -
> -/**
> - * This replaces the use of malloc() and memset().  This function uses calloc
> - * internally, which results in the memory region being zero'd by the kernel
> - * on memory allocation.
> - *
> - * @param log   Log context
> - * @param sz    size of the memory region being allocated
> - *
> - * @return Returns a void pointer to the memory region on success, otherwise NULL
> - */
> -__malloc__ void *malloc_nullsafe(LogContext *log, size_t sz) {
> -        void *buf = NULL;
> -
> -        buf = calloc(1, sz);    /* Using calloc, also gives a zero'd memory region */
> -        if( !buf ) {
> -		writelog(log, LOG_EMERG, "Could not allocate memory region for %ld bytes", sz);
> -		exit(9);
> -        }
> -        return buf;
> -}
> diff --git a/server/parser/eurephia_nullsafe.h b/server/parser/eurephia_nullsafe.h
> deleted file mode 100644
> index 00e6188..0000000
> --- a/server/parser/eurephia_nullsafe.h
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/* eurephia_nullsafe.h
> - *
> - *  standard C string functions, which is made NULL safe by checking
> - *  if input value is NULL before performing the action.
> - *
> - *  This version is modified to work outside the eurephia project.
> - *
> - *  GPLv2 only - Copyright (C) 2008, 2009
> - *               David Sommerseth <dazo@users.sourceforge.net>
> - *
> - */
> -
> -/**
> - * @file   eurephia_nullsafe.h
> - * @author David Sommerseth <dazo@users.sourceforge.net>
> - * @date   2008-08-06
> - *
> - * @brief standard C string functions, which is made NULL safe by checking
> - *        if input value is NULL before performing the action.
> - *
> - */
> -
> -#ifndef   	EUREPHIA_NULLSAFE_H_
> -#define    	EUREPHIA_NULLSAFE_H_
> -
> -#include <log.h>
> -
> -/**
> - * atoi() wrapper.  Converts any string into a integer
> - *
> - * @param str Input string
> - *
> - * @return Returns integer
> - */
> -#define atoi_nullsafe(str) (str != NULL ? atoi(str) : 0)
> -
> -
> -/**
> - * strdup() wrapper.  Duplicates the input string.
> - *
> - * @param str Input string to be duplicated
> - *
> - * @return Returns a pointer to the duplicate (char *) on success, NULL otherwise.
> - * If input was NULL, NULL is returned.
> - */
> -#define strdup_nullsafe(str) (str != NULL ? strdup(str) : NULL)
> -
> -
> -/**
> - * Wrapper macro, which appends a string to a destination string without exceeding the size
> - * of the destination buffer.
> - *
> - * @param dest Pointer to the destination buffer
> - * @param src  Pointer to the value being concatenated to the destination string.
> - * @param size Size of the destination buffer
> - */
> -#define append_str(dest, src, size) strncat(dest, src, (size - strlen_nullsafe(dest)))
> -
> -
> -/**
> - * strlen() wrapper.  Returns the length of a string
> - *
> - * @param str Input string
> - *
> - * @return Returns int with length of string.  If input is NULL, it returns 0.
> - */
> -#define strlen_nullsafe(str) (str != NULL ? strlen(str) : 0)
> -
> -
> -void *malloc_nullsafe(LogContext *, size_t);
> -
> -/**
> - * Null safe free().  It will not attempt to free a pointer which is NULL.
> - *
> - * @param ptr Pointer to the memory region being freed.
> - *
> - */
> -#define free_nullsafe(ptr) if( ptr ) { free(ptr); ptr = NULL; }
> -
> -
> -/**
> - * Function which will return a default string value if no input data was provided.
> - *
> - * @param str     Input string
> - * @param defstr  Default string
> - *
> - * @return Returns the pointer to the input string if the string length > 0.  Otherwise it
> - * will return a pointer to the default string.
> - */
> -#define defaultValue(str, defstr) (strlen_nullsafe(str) == 0 ? defstr : str)
> -
> -
> -/**
> - * Function which will return a default integer value if no input data was provided.
> - *
> - * @param ival   input integer value
> - * @param defval default integer value
> - *
> - * @return Returns the ival value if it is > 0, otherwise defval value is returned.
> - */
> -#define defaultIntValue(ival, defval) (ival == 0 ? defval : ival)
> -#endif 	    /* !EUREPHIA_NULLSAFE_H_ */
> diff --git a/server/parser/eurephia_values.c b/server/parser/eurephia_values.c
> deleted file mode 100644
> index 8f3645a..0000000
> --- a/server/parser/eurephia_values.c
> +++ /dev/null
> @@ -1,301 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/* eurephia_values.c  --  Generic interface for processing key->value pairs
> - *
> - * This version is modified to work outside the eurephia project.
> - *
> - *  GPLv2 only - Copyright (C) 2008
> - *               David Sommerseth <dazo@users.sourceforge.net>
> - *
> - */
> -
> -/**
> - * @file   eurephia_values.c
> - * @author David Sommerseth <dazo@users.sourceforge.net>
> - * @date   2008-08-06
> - *
> - * @brief  Generic interface for handling key->value pairs
> - *
> - */
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <assert.h>
> -
> -#include <eurephia_nullsafe.h>
> -#include <eurephia_values_struct.h>
> -
> -
> -
> -/**
> - * Function for freeing up an eurephiaVALUES stack.  This function is normally not called
> - * directly, but usually via the eFree_values(...) macro.
> - *
> - * @param vls  Pointer to a eurephiaVALUES stack to be freed.
> - */
> -void eFree_values_func(eurephiaVALUES *vls) {
> -	eurephiaVALUES *ptr = NULL, *ptr_next = NULL;
> -
> -	ptr = vls;
> -	while( ptr ) {
> -		free_nullsafe(ptr->key);
> -		free_nullsafe(ptr->val);
> -
> -		ptr_next = ptr->next;
> -		free_nullsafe(ptr);
> -		ptr = ptr_next;
> -	}
> -}
> -
> -
> -/**
> - * Retrieve an eurephiaVALUES element for a given value key
> - *
> - * @param vls  Pointer to the eurephiaVALUES stack where to search for the element
> - * @param key  String containing the key name of the value requested.
> - *
> - * @return Returns an eurephiaVALUES element on success, otherwise NULL.
> - */
> -eurephiaVALUES *eGet_valuestruct(eurephiaVALUES *vls, const char *key)
> -{
> -        eurephiaVALUES *ptr = NULL;
> -
> -        if( (vls == NULL) || (key == NULL) ) {
> -                return NULL;
> -        }
> -
> -        ptr = vls;
> -        while( ptr != NULL ) {
> -                if( (ptr->key != NULL) && (strcmp(key, ptr->key) == 0) ) {
> -                        return ptr;
> -                }
> -                ptr = ptr->next;
> -        }
> -        return NULL;
> -}
> -
> -
> -/**
> - * Retrieves the value of a given key from an eurephiaVALUES stack.
> - *
> - * @param vls  Pointer to an eurephiaVALUES stack where to search for the value
> - * @param key  String containing the key name of the value requested
> - *
> - * @return Returns a string (char *) with the requested value if found, otherwise NULL.
> - */
> -char *eGet_value(eurephiaVALUES *vls, const char *key)
> -{
> -        eurephiaVALUES *ptr = NULL;
> -
> -        ptr = eGet_valuestruct(vls, key);
> -        return (ptr != NULL ? ptr->val : NULL);
> -}
> -
> -
> -/**
> - * Creates a new eurephiaVALUES stack
> - *
> - * @param log   Log context
> - * @param evgid  int value, giving the stack an ID number.  Useful when looking through log files later on.
> - *
> - * @return Returns an empty eurephiaVALUES struct on success, otherwise NULL.
> - */
> -eurephiaVALUES *eCreate_value_space(LogContext *log, int evgid)
> -{
> -        eurephiaVALUES *ptr = NULL;
> -
> -        ptr = (eurephiaVALUES *) malloc_nullsafe(log, sizeof(eurephiaVALUES) + 2);
> -	ptr->log = log;
> -        ptr->evgid = evgid;
> -        return ptr;
> -}
> -
> -
> -/**
> - * Adds a new eurephiaVALUES stack to another eurephiaVALUES stack.  If the evgid value differs, it will
> - * be overwritten with the value of the destination stack.
> - *
> - * @param vls    Destination eurephiaVALUES stack
> - * @param newval Source eurephiaVALUES stack
> - */
> -void eAdd_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval) {
> -        eurephiaVALUES *ptr = NULL;
> -        int vid = 0;
> -
> -        assert(vls != NULL);
> -
> -        if( (vls->key == NULL) && (vls->val == NULL) && (vls->next == NULL) && (vls->evid == 0)) {
> -                // Update header record if it is empty, by copying newval record.  Free newval afterwards
> -                vls->key  = strdup(newval->key);
> -                vls->val  = strdup(newval->val);
> -                vls->evid = 0;
> -                vls->next = NULL;
> -                eFree_values_func(newval);
> -        } else {
> -                // Add values to the value chain, loop to the end and append it
> -                ptr = vls;
> -                while( ptr->next != NULL ) {
> -                        ptr = ptr->next;
> -                        vid = (vid > ptr->evid ? vid : ptr->evid);
> -                }
> -                newval->evid = vid+1;     // Increase the value counter
> -                newval->evgid = ptr->evgid;
> -                ptr->next = newval;
> -        }
> -}
> -
> -
> -/**
> - * Adds a new key/value pair to an eurephiaVALUES stack
> - *
> - * @param vls  Destination eurephiaVALUES stack
> - * @param key  Key name for the value being stored
> - * @param val  Value to be stored
> - */
> -void eAdd_value(eurephiaVALUES *vls, const char *key, const char *val)
> -{
> -        eurephiaVALUES *ptr = NULL;
> -
> -        assert(vls != NULL);
> -
> -        // Allocate buffer and save values
> -        ptr = eCreate_value_space(vls->log, vls->evid);
> -        if( ptr == NULL ) {
> -		writelog(vls->log, LOG_EMERG, "Failed to add value to the value chain");
> -		exit(9);
> -        }
> -        ptr->key = strdup_nullsafe(key);
> -        ptr->val = strdup_nullsafe(val);
> -        ptr->evgid = vls->evgid;
> -
> -        // Add value struct to the chain
> -        eAdd_valuestruct(vls, ptr);
> -}
> -
> -
> -/**
> - * Updates the value of a key in a values stack
> - *
> - * @param vls      eurephiaVALUES key/value stack to update
> - * @param key      String with key name to update
> - * @param newval   String with the new value
> - * @param addunkn  Add unknown keys.  If set to 1, if the key is not found it will add a new key
> - */
> -void eUpdate_value(eurephiaVALUES *vls, const char *key, const char *newval, const int addunkn) {
> -	eurephiaVALUES *ptr = NULL;
> -
> -	assert( (vls != NULL) && (key != NULL) );
> -
> -	ptr = eGet_valuestruct(vls, key);
> -	if( ptr ) {
> -		free_nullsafe(ptr->val);
> -		ptr->val = strdup_nullsafe(newval);
> -	} else if( addunkn == 1 ) {
> -		eAdd_value(vls, key, newval);
> -	}
> -}
> -
> -
> -/**
> - * Updates a value struct element based on another value struct element contents (key/value)
> - *
> - * @param vls      eurephiaVALUES key/value stack to update
> - * @param newval   eurephiaVALUES element with the new value
> - * @param addunkn  Add unknown keys.  If set to 1, if the key is not found it will add a new key
> - *
> - * @return Returns a pointer to the first element in the chain.  If the element being updated
> - *         was the first element in the old chain, the first element will be a new element with a
> - *         new address.
> - */
> -eurephiaVALUES *eUpdate_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval, const int addunkn) {
> -	eurephiaVALUES *ptr = NULL, *prevptr = NULL;
> -
> -	assert( (vls != NULL) && (newval != NULL) && (newval->key != NULL) );
> -
> -	prevptr = vls;
> -	for( ptr = vls; ptr != NULL; ptr = ptr->next ) {
> -                if( (ptr->key != NULL) && (strcmp(newval->key, ptr->key) == 0) ) {
> -			newval->evgid = ptr->evgid;
> -			newval->evid = ptr->evid;
> -			newval->next = ptr->next;
> -			ptr->next = NULL;
> -			if( ptr == vls ) {
> -				// If the element found is the first one, do special treatment
> -				eFree_values_func(ptr);
> -				return newval;
> -			} else {
> -				prevptr->next = newval;
> -				eFree_values_func(ptr);
> -				return vls;
> -			}
> -                }
> -		prevptr = ptr;
> -	}
> -
> -	if( addunkn == 1 ) {
> -		eAdd_valuestruct(vls, newval);
> -	}
> -	return vls;
> -}
> -
> -
> -/**
> - * Removes the key/value pair identified by evgid and evid from the given eurephiaVALUES chain
> - *
> - * @param vls    Pointer to an eurephiaVALUES chain with the data
> - * @param evgid  Group ID of the chain
> - * @param evid   Element ID of the chain element to be removed
> - *
> - * @return Returns a pointer to the chain.  The pointer is only changed if the first element in the
> - *         chain is deleted
> - */
> -eurephiaVALUES *eRemove_value(eurephiaVALUES *vls, unsigned int evgid, unsigned int evid) {
> -        eurephiaVALUES *ptr = NULL, *prev_ptr = NULL;
> -        int found = 0;
> -
> -        // Find the value element
> -        for( ptr = vls; ptr != NULL; ptr = ptr->next ) {
> -                if( (ptr->evgid == evgid) && (ptr->evid == evid) ) {
> -                        found = 1;
> -                        break;
> -                }
> -                prev_ptr = ptr;
> -        }
> -
> -        if( !found ) {
> -                return vls;
> -        }
> -
> -        if( ptr != vls ) {
> -                prev_ptr->next = ptr->next;
> -                ptr->next = NULL;
> -                eFree_values_func(ptr);
> -                return vls;
> -        } else {
> -                prev_ptr = ptr->next;
> -                ptr->next = NULL;
> -                eFree_values_func(ptr);
> -                return prev_ptr;
> -        }
> -}
> -
> -
> -/**
> - * Counts number of elements in an eurephiaVALUES chain.
> - *
> - * @param vls eurephiaVALUES pointer to be counted
> - *
> - * @return Returns number of elements found.
> - */
> -unsigned int eCount(eurephiaVALUES *vls) {
> -	eurephiaVALUES *ptr = NULL;
> -	unsigned int c = 0;
> -
> -	if( vls == NULL ) {
> -		return 0;
> -	}
> -	for(ptr = vls; ptr != NULL; ptr = ptr->next ) {
> -		c++;
> -	}
> -	return c;
> -}
> diff --git a/server/parser/eurephia_values.h b/server/parser/eurephia_values.h
> deleted file mode 100644
> index 0daba4a..0000000
> --- a/server/parser/eurephia_values.h
> +++ /dev/null
> @@ -1,48 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/* eurephia_values.h  --  Generic interface for processing key->value pairs
> - *
> - * This version is modified to work outside the eurephia project.
> - *
> - *  GPLv2 only - Copyright (C) 2008
> - *               David Sommerseth <dazo@users.sourceforge.net>
> - *
> - */
> -
> -/**
> - * @file   eurephia_values.h
> - * @author David Sommerseth <dazo@users.sourceforge.net>
> - * @date   2008-08-06
> - *
> - * @brief  Generic interface for handling key->value pairs
> - *
> - */
> -
> -#include <eurephia_values_struct.h>
> -
> -#ifndef         EUREPHIA_VALUES_H_
> -#define         EUREPHIA_VALUES_H_
> -
> -
> -eurephiaVALUES *eGet_valuestruct(eurephiaVALUES *vls, const char *key);
> -char *eGet_value(eurephiaVALUES *vls, const char *key);
> -
> -eurephiaVALUES *eCreate_value_space(LogContext *log, int evid);
> -
> -void eAdd_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval);
> -void eAdd_value(eurephiaVALUES *vls, const char *key, const char *val);
> -void eUpdate_value(eurephiaVALUES *vls, const char *key, const char *newval, const int addunkn);
> -eurephiaVALUES *eUpdate_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval, const int addunkn);
> -eurephiaVALUES *eRemove_value(eurephiaVALUES *vls, unsigned int evgid, unsigned int evid);
> -unsigned int eCount(eurephiaVALUES *vls);
> -
> -/**
> - * Front-end function for eFree_values_func().  Frees eurephiaVALUES pointer chain and
> - * sets the pointer to NULL.
> - *
> - * @param v eurephiaVALUES pointer which is being freed.
> - *
> - */
> -#define eFree_values(v) { eFree_values_func(v); v = NULL; }
> -void eFree_values_func(eurephiaVALUES *vls);
> -
> -#endif      /* !EUREPHIA_VALUES_H_ */
> diff --git a/server/parser/eurephia_values_struct.h b/server/parser/eurephia_values_struct.h
> deleted file mode 100644
> index 6ea530a..0000000
> --- a/server/parser/eurephia_values_struct.h
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/* eurephia_values.h  --  eurephiaVALUES struct typedef
> - *
> - *  GPLv2 only - Copyright (C) 2008
> - *               David Sommerseth <dazo@users.sourceforge.net>
> - *
> - */
> -
> -/**
> - * @file   eurephia_values_struct.h
> - * @author David Sommerseth <dazo@users.sourceforge.net>
> - * @date   2008-11-05
> - *
> - * @brief  Definition of the eurephiaVALUES struct
> - *
> - */
> -
> -#ifndef   	EUREPHIA_VALUES_STRUCT_H_
> -# define   	EUREPHIA_VALUES_STRUCT_H_
> -
> -#include <log.h>
> -
> -/**
> - * eurephiaVALUES is a pointer chain with key/value pairs.  If having several
> - * such pointer chains, they can be given different group IDs to separate them,
> - * which is especially useful during debugging.
> - *
> - */
> -typedef struct __eurephiaVALUES {
> -	LogContext *log;        /**< Pointer to an established log context, used for logging */
> -        unsigned int evgid;	/**< Group ID, all elements in the same chain should have the same value */
> -        unsigned int evid;	/**< Unique ID per element in a pointer chain */
> -        char *key;		/**< The key name of a value */
> -        char *val;		/**< The value itself */
> -        struct __eurephiaVALUES *next; /**< Pointer to the next element in the chain. NULL == end of chain */
> -} eurephiaVALUES;
> -
> -#endif 	    /* !EUREPHIA_VALUES_STRUCT_H_ */
> diff --git a/server/parser/eurephia_xml.c b/server/parser/eurephia_xml.c
> deleted file mode 100644
> index 0679956..0000000
> --- a/server/parser/eurephia_xml.c
> +++ /dev/null
> @@ -1,147 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/* eurephia_xml.c  --  Generic helper functions for XML parsing
> - *
> - * This version is modified to work outside the eurephia project.
> - *
> - *  GPLv2 only - Copyright (C) 2008, 2009
> - *               David Sommerseth <dazo@users.sourceforge.net>
> - *
> - */
> -
> -/**
> - * @file   eurephia_xml.c
> - * @author David Sommerseth <dazo@users.sourceforge.net>
> - * @date   2008-12-15
> - *
> - * @brief  Generic XML parser functions
> - *
> - *
> - */
> -
> -#include <stdarg.h>
> -#include <string.h>
> -#include <assert.h>
> -
> -#include <libxml/tree.h>
> -#include <libxml/xmlsave.h>
> -#include <libxml/xmlstring.h>
> -
> -#include <eurephia_nullsafe.h>
> -
> -
> -/**
> - * Retrieves a given XML node attribute/property
> - *
> - * @param attr xmlAttr pointer from an xmlNode pointer.
> - * @param key  The attribute name to search for
> - *
> - * @return The value of the found attribute.  If not found, NULL is returned.
> - */
> -char *xmlGetAttrValue(xmlAttr *attr, const char *key) {
> -        xmlAttr *aptr;
> -        xmlChar *x_key = NULL;
> -
> -        x_key = xmlCharStrdup(key);
> -        assert( x_key != NULL );
> -
> -        for( aptr = attr; aptr != NULL; aptr = aptr->next ) {
> -                if( xmlStrcmp(aptr->name, x_key) == 0 ) {
> -                        free_nullsafe(x_key);
> -                        return (char *)(aptr->children != NULL ? aptr->children->content : NULL);
> -                }
> -        }
> -        free_nullsafe(x_key);
> -        return NULL;
> -}
> -
> -
> -/**
> - * Loops through a xmlNode chain to look for a given tag.  The search is not recursive.
> - *
> - * @param node xmlNode pointer where to look
> - * @param key  the name of the XML tag to find
> - *
> - * @return xmlNode pointer to the found xmlNode.  NULL is returned if not found.
> - */
> -xmlNode *xmlFindNode(xmlNode *node, const char *key) {
> -        xmlNode *nptr = NULL;
> -        xmlChar *x_key = NULL;
> -
> -        if( (node == NULL) || (node->children == NULL) ) {
> -                return NULL;
> -        }
> -
> -        x_key = xmlCharStrdup(key);
> -        assert( x_key != NULL );
> -
> -        for( nptr = node->children; nptr != NULL; nptr = nptr->next ) {
> -                if( xmlStrcmp(nptr->name, x_key) == 0 ) {
> -                        free_nullsafe(x_key);
> -                        return nptr;
> -                }
> -        }
> -        free_nullsafe(x_key);
> -        return NULL;
> -}
> -
> -
> -/**
> - * Return the text content of a given xmlNode
> - *
> - * @param n xmlNode to extract the value from.
> - *
> - * @return returns a char pointer with the text contents of an xmlNode.
> - */
> -inline char *xmlExtractContent(xmlNode *n) {
> -        return (char *) (((n != NULL) && (n->children != NULL)) ? n->children->content : NULL);
> -}
> -
> -
> -/**
> - * Get the text contents of a given xmlNode
> - *
> - * @param node An xmlNode pointer where to look for the contents
> - * @param key  Name of the tag to retrieve the content of.
> - *
> - * @return Returns a string with the text content, if the node is found.  Otherwise, NULL is returned.
> - */
> -inline char *xmlGetNodeContent(xmlNode *node, const char *key) {
> -        return xmlExtractContent(xmlFindNode(node, key));
> -}
> -
> -
> -/**
> - * Serialises an xmlNode to a string
> - *
> - * @param log   Log context
> - * @param node Input XML node to be serialised
> - *
> - * @return Returns a pointer to a new buffer containing the serialised data.  This buffer must be freed
> - *         after usage
> - */
> -char *xmlNodeToString(LogContext *log, xmlNode *node) {
> -	xmlBuffer *buf = NULL;
> -	xmlSaveCtxt *serctx = NULL;
> -	char *ret = NULL;
> -
> -	if( node == NULL ) {
> -		writelog(log, LOG_ALERT, "xmlNodeToString: Input data is NULL");
> -		return NULL;
> -	}
> -
> -	buf = xmlBufferCreate();
> -	assert( buf != NULL );
> -
> -	serctx = xmlSaveToBuffer(buf, "UTF-8", XML_SAVE_NO_EMPTY|XML_SAVE_NO_DECL);
> -	assert( serctx != NULL );
> -
> -	if( xmlSaveTree(serctx, node) < 0 ) {
> -		writelog(log, LOG_ALERT, "xmlNodeToString: Failed to serialise xmlNode");
> -		return NULL;
> -	}
> -	xmlSaveClose(serctx);
> -
> -	ret = strdup_nullsafe((char *) xmlBufferContent(buf));
> -	xmlBufferFree(buf);
> -	return ret;
> -}
> diff --git a/server/parser/eurephia_xml.h b/server/parser/eurephia_xml.h
> deleted file mode 100644
> index 7bfffe8..0000000
> --- a/server/parser/eurephia_xml.h
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/* eurephia_xml.h  --  Generic helper functions for XML parsing
> - *
> - * This version is modified to work outside the eurephia project.
> - *
> - *  GPLv2 only - Copyright (C) 2008
> - *               David Sommerseth <dazo@users.sourceforge.net>
> - *
> - */
> -
> -/**
> - * @file   eurephia_xml.h
> - * @author David Sommerseth <dazo@users.sourceforge.net>
> - * @date   2008-12-15
> - *
> - * @brief  Generic XML parser functions
> - *
> - */
> -
> -
> -#ifndef   	EUREPHIA_XML_H_
> -#define   	EUREPHIA_XML_H_
> -
> -#include <stdarg.h>
> -
> -#include <libxml/tree.h>
> -
> -/**
> - * Simple iterator macro for iterating xmlNode pointers
> - *
> - * @param start  Pointer to an xmlNode where to start iterating
> - * @param itn    An xmlNode pointer which will be used for the iteration.
> - */
> -#define foreach_xmlnode(start, itn)  for( itn = start; itn != NULL; itn = itn->next )
> -
> -char *xmlGetAttrValue(xmlAttr *properties, const char *key);
> -xmlNode *xmlFindNode(xmlNode *node, const char *key);
> -
> -inline char *xmlExtractContent(xmlNode *n);
> -inline char *xmlGetNodeContent(xmlNode *node, const char *key);
> -char *xmlNodeToString(LogContext *log, xmlNode *node);
> -
> -#endif 	    /* !EUREPHIA_XML_H_ */
> diff --git a/server/parser/log.c b/server/parser/log.c
> deleted file mode 100644
> index 9a21326..0000000
> --- a/server/parser/log.c
> +++ /dev/null
> @@ -1,228 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   log.c
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Wed Oct 21 11:38:51 2009
> - *
> - * @brief  Generic log functions
> - *
> - */
> -
> -#include <stdio.h>
> -#include <string.h>
> -#include <stdlib.h>
> -#include <errno.h>
> -#include <assert.h>
> -#include <stdarg.h>
> -#include <pthread.h>
> -#include <syslog.h>
> -
> -#include <eurephia_nullsafe.h>
> -#include <log.h>
> -
> -/**
> - * Maps defined log level strings into syslog
> - * compatible LOG_* integer values
> - */
> -static struct {
> -	const char *priority_str;
> -	const int prio_level;
> -} syslog_prio_map[] = {
> -	{"emerg",     LOG_EMERG},
> -	{"emergency", LOG_EMERG},
> -	{"alert",     LOG_ALERT},
> -	{"crit",      LOG_CRIT},
> -	{"critical",  LOG_CRIT},
> -	{"err",       LOG_ERR},
> -	{"error",     LOG_ERR},
> -	{"warning",   LOG_WARNING},
> -	{"warn",      LOG_WARNING},
> -	{"notice",    LOG_NOTICE},
> -	{"info",      LOG_INFO},
> -	{"debug",     LOG_DEBUG},
> -	{NULL, 0}
> -};
> -
> -
> -/**
> - * Initialises a log context.  It parses the log destination and log level and
> - * prepares a context which can be used by writelog()
> - *
> - * @param logdest  String containing either syslog:[facility], stderr: or stdout:, or a file name.
> - * @param loglvl   Defines the log level.  Can be one of the values defined in syslog_prio_map.
> - *
> - * @return Returns a pointer to a log context on success, otherwise NULL.
> - */
> -LogContext *init_log(const char *logdest, const char *loglvl) {
> -	LogContext *logctx = NULL;
> -	int i;
> -
> -	logctx = (LogContext *) calloc(1, sizeof(LogContext)+2);
> -	assert( logctx != NULL);
> -
> -	logctx->logfp = NULL;
> -
> -	// Get the int value of the log level string
> -	logctx->verbosity = -1;
> -	if( loglvl ) {
> -		for( i = 0; syslog_prio_map[i].priority_str; i++ ) {
> -			if( strcasecmp(loglvl, syslog_prio_map[i].priority_str) == 0 ) {
> -				logctx->verbosity = syslog_prio_map[i].prio_level;
> -				break;
> -			}
> -		}
> -	}
> -
> -	// If log level is not set, set LOG_INFo as default
> -	if( logctx->verbosity == -1 ) {
> -		logctx->verbosity = LOG_INFO;
> -	}
> -
> -	if( logdest == NULL ) {
> -		logctx->logtype = ltSYSLOG;
> -		openlog("rteval-parserd", LOG_PID, LOG_DAEMON);
> -	} else {
> -		if( strncmp(logdest, "syslog:", 7) == 0 ) {
> -			const char *fac = logdest+7;
> -			int facid = LOG_DAEMON;
> -
> -			if( strcasecmp(fac, "local0") == 0 ) {
> -				facid = LOG_LOCAL0;
> -			} else if( strcasecmp(fac, "local1") == 0 ) {
> -				facid = LOG_LOCAL1;
> -			} else if( strcasecmp(fac, "local2") == 0 ) {
> -				facid = LOG_LOCAL2;
> -			} else if( strcasecmp(fac, "local3") == 0 ) {
> -				facid = LOG_LOCAL3;
> -			} else if( strcasecmp(fac, "local4") == 0 ) {
> -				facid = LOG_LOCAL4;
> -			} else if( strcasecmp(fac, "local5") == 0 ) {
> -				facid = LOG_LOCAL5;
> -			} else if( strcasecmp(fac, "local6") == 0 ) {
> -				facid = LOG_LOCAL6;
> -			} else if( strcasecmp(fac, "local7") == 0 ) {
> -				facid = LOG_LOCAL7;
> -			} else if( strcasecmp(fac, "user") == 0 ) {
> -				facid = LOG_USER;
> -			}
> -			logctx->logtype = ltSYSLOG;
> -			openlog("rteval-parserd", LOG_PID, facid);
> -		} else if( strcmp(logdest, "stderr:") == 0 ) {
> -			logctx->logtype = ltCONSOLE;
> -			logctx->logfp = stderr;
> -		} else if( strcmp(logdest, "stdout:") == 0 ) {
> -			logctx->logtype = ltCONSOLE;
> -			logctx->logfp = stdout;
> -		} else {
> -			logctx->logtype = ltFILE;
> -			logctx->logfp = fopen(logdest, "a");
> -			if( logctx->logfp == NULL ) {
> -				fprintf(stderr, "** ERROR **  Failed to open log file %s: %s\n",
> -					logdest, strerror(errno));
> -				free_nullsafe(logctx);
> -				return NULL;
> -			}
> -		}
> -	}
> -
> -	if( logctx->logtype != ltSYSLOG ) {
> -		static pthread_mutex_t mtx = PTHREAD_MUTEX_INITIALIZER;
> -		logctx->mtx_log = &mtx;
> -	}
> -	return logctx;
> -}
> -
> -
> -/**
> - * Tears down a log context.  Closes log files and releases memory used by the log context.
> - *
> - * @param lctx  Log context to close
> - */
> -void close_log(LogContext *lctx) {
> -	if( !lctx ) {
> -		return;
> -	}
> -
> -	switch( lctx->logtype ) {
> -	case ltFILE:
> -		fclose(lctx->logfp);
> -		break;
> -
> -	case ltSYSLOG:
> -		closelog();
> -		break;
> -
> -	case ltCONSOLE:
> -		break;
> -	}
> -	free_nullsafe(lctx);
> -}
> -
> -
> -/**
> - * Write data to the log.
> - *
> - * @param lctx    Log context, where the data will be logged
> - * @param loglvl  Log level.  See the priorities for syslog(3) for valid values.
> - * @param fmt     Data to be logged (stdarg)
> - */
> -void writelog(LogContext *lctx, unsigned int loglvl, const char *fmt, ... ) {
> -	if( !lctx || !fmt ) {
> -		return;
> -	}
> -
> -	if( lctx->verbosity >= loglvl ) {
> -		va_list ap;
> -
> -		va_start(ap, fmt);
> -		switch( lctx->logtype ) {
> -		case ltSYSLOG:
> -			vsyslog(loglvl, fmt, ap);
> -			break;
> -
> -		case ltCONSOLE:
> -		case ltFILE:
> -			pthread_mutex_lock(lctx->mtx_log);
> -			switch( loglvl ) {
> -			case LOG_EMERG:
> -				fprintf(lctx->logfp, "**  EMERG  ERROR  ** ");
> -				break;
> -			case LOG_ALERT:
> -				fprintf(lctx->logfp, "**  ALERT  ERROR  ** ");
> -				break;
> -			case LOG_CRIT:
> -				fprintf(lctx->logfp, "** CRITICAL ERROR ** ");
> -				break;
> -			case LOG_ERR:
> -				fprintf(lctx->logfp, "** ERROR ** ");
> -				break;
> -			case LOG_WARNING:
> -				fprintf(lctx->logfp, "*WARNING* ");
> -				break;
> -			case LOG_NOTICE:
> -				fprintf(lctx->logfp, "[NOTICE] ");
> -				break;
> -			case LOG_INFO:
> -				fprintf(lctx->logfp, "[INFO]   ");
> -				break;
> -			case LOG_DEBUG:
> -				fprintf(lctx->logfp, "[DEBUG]  ");
> -				break;
> -			}
> -			vfprintf(lctx->logfp, fmt, ap);
> -			fprintf(lctx->logfp, "\n");
> -			pthread_mutex_unlock(lctx->mtx_log);
> -
> -			if( lctx->logtype == ltFILE ) {
> -				fflush(lctx->logfp);
> -			}
> -			break;
> -		}
> -		va_end(ap);
> -	}
> -}
> diff --git a/server/parser/log.h b/server/parser/log.h
> deleted file mode 100644
> index deeb784..0000000
> --- a/server/parser/log.h
> +++ /dev/null
> @@ -1,43 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   log.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Wed Oct 21 11:38:51 2009
> - *
> - * @brief  Generic log functions
> - *
> - */
> -
> -#ifndef _RTEVAL_LOG_H
> -#define _RTEVAL_LOG_H
> -
> -#include <pthread.h>
> -#include <syslog.h>
> -
> -/**
> - * Supported log types
> - */
> -typedef enum { ltSYSLOG, ltFILE, ltCONSOLE } LogType;
> -
> -/**
> - * The log context structure.  Keeps needed information for
> - * a flawless logging experience :-P
> - */
> -typedef struct {
> -	LogType logtype;           /**<  What kind of log "device" will be used */
> -	FILE *logfp;               /**<  Only used if logging to stderr, stdout or a file */
> -	unsigned int verbosity;    /**<  Defines which log level the user wants to log */
> -	pthread_mutex_t *mtx_log;  /**<  Mutex to threads to write to a file based log in parallel */
> -} LogContext;
> -
> -
> -LogContext *init_log(const char *fname, const char *loglvl);
> -void close_log(LogContext *lctx);
> -void writelog(LogContext *lctx, unsigned int loglvl, const char *fmt, ... );
> -
> -#endif
> diff --git a/server/parser/parsethread.c b/server/parser/parsethread.c
> deleted file mode 100644
> index b327e2d..0000000
> --- a/server/parser/parsethread.c
> +++ /dev/null
> @@ -1,370 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   parsethread.c
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Thu Oct 15 11:52:10 2009
> - *
> - * @brief  Contains the "main" function which a parser threads runs
> - *
> - *
> - */
> -
> -#include <stdio.h>
> -#include <string.h>
> -#include <unistd.h>
> -#include <sys/types.h>
> -#include <sys/stat.h>
> -#include <signal.h>
> -#include <pthread.h>
> -#include <libgen.h>
> -#include <errno.h>
> -#include <assert.h>
> -
> -#include <eurephia_nullsafe.h>
> -#include <parsethread.h>
> -#include <pgsql.h>
> -#include <log.h>
> -#include <threadinfo.h>
> -#include <statuses.h>
> -
> -
> -/**
> - * Does the same job as 'mkdir -p', but it expects a complete filename as input, and it will
> - * extract the directory path from that filename
> - *
> - * @param fname  Full filename containing the directory the report will reside.
> - *
> - * @return Returns 1 on success, otherwise -1
> - */
> -static int make_report_dir(LogContext *log, const char *fname) {
> -	char *fname_cp = NULL, *dname = NULL, *chkdir = NULL;
> -	char *tok = NULL, *saveptr = NULL;
> -	int ret = 0;
> -	struct stat info;
> -
> -	if( !fname ) {
> -		return 0;
> -	}
> -
> -	fname_cp = strdup(fname);
> -	assert( fname_cp != NULL );
> -	dname = dirname(fname_cp);
> -	chkdir = malloc_nullsafe(log, strlen(dname)+8);
> -
> -	if( dname[0] == '/' ) {
> -		chkdir[0] = '/';
> -	}
> -
> -	// Traverse the directory path, and make sure the directory exists
> -	tok = strtok_r(dname, "/", &saveptr);
> -	while( tok ) {
> -		strcat(chkdir, tok);
> -		strcat(chkdir, "/");
> -
> -		errno = 0;
> -		// Check if directory exists
> -		if( (stat(chkdir, &info) < 0) ) {
> -			switch( errno ) {
> -			case ENOENT: // If the directory do not exist, create it
> -				if( mkdir(chkdir, 0755) < 0 ) {
> -					// If creating dir failed, report error
> -					writelog(log, LOG_ALERT,
> -						 "Could not create directory: %s (%s)",
> -						 chkdir, strerror(errno));
> -					ret = -1;
> -					goto exit;
> -				}
> -				break;
> -			default: // If other failure, report that and exit
> -				writelog(log, LOG_ALERT,
> -					 "Could not access directory: %s (%s)",
> -					 chkdir, strerror(errno));
> -				ret = -1;
> -				goto exit;
> -			}
> -		}
> -		// Goto next path element
> -		tok = strtok_r(NULL, "/", &saveptr);
> -	}
> -	ret = 1;
> - exit:
> -	free_nullsafe(fname_cp);
> -	free_nullsafe(chkdir);
> -
> -	return ret;
> -}
> -
> -
> -/**
> - * Builds up a proper full path of where to save the report.
> - *
> - * @param destdir   Destination directory for all reports
> - * @param fname     Report filename, containing hostname of the reporter
> - * @param rterid    rteval run ID
> - *
> - * @return Returns a pointer to a string with the new full path filename on success, otherwise NULL.
> - */
> -static char *get_destination_path(LogContext *log, const char *destdir,
> -				  parseJob_t *job, const int rterid)
> -{
> -        char *newfname = NULL;
> -        int retlen = 0;
> -
> -        if( !job || rterid < 0 ) {
> -                return NULL;
> -        }
> -
> -        retlen = strlen_nullsafe(job->clientid) + strlen(destdir) + 24;
> -        newfname = malloc_nullsafe(log, retlen+2);
> -
> -        snprintf(newfname, retlen, "%s/%s/report-%i.xml", destdir, job->clientid, rterid);
> -
> -        return newfname;
> -}
> -
> -
> -/**
> - * Checks if the file size of the given file is below the given max size value.
> - *
> - * @param thrdata  Pointer to a threadData_t structure with log context and max_report_size setting
> - * @param fname    Filename of the file to check
> - *
> - * @return Returns 1 if file is within the limit, otherwise 0.  On errors -1 is returned.
> - */
> -inline int check_filesize(threadData_t *thrdata, const char *fname) {
> -	struct stat info;
> -
> -	if( !fname ) {
> -		return 0;
> -	}
> -
> -	errno = 0;
> -	if( (stat(fname, &info) < 0) ) {
> -		writelog(thrdata->dbc->log, LOG_ERR, "Failed to check report file '%s': %s",
> -			 fname, strerror(errno));
> -		return -1;
> -	}
> -
> -	return (info.st_size <= thrdata->max_report_size);
> -}
> -
> -
> -/**
> - * The core parse function.  Parses an XML file and stores it in the database according to
> - * the xmlparser.xsl template.
> - *
> - * @param thrdata  Pointer to a threadData_t structure with database connection, log context, settings, etc
> - * @param job      Pointer to a parseJob_t structure containing the job information
> - *
> - * @return Return values:
> - * @code
> - *          STAT_SUCCESS  : Successfully registered report
> - *          STAT_FTOOBIG  : XML report file is too big
> - *          STAT_XMLFAIL  : Could not parse the XML report file
> - *          STAT_SYSREG   : Failed to register the system into the systems or systems_hostname tables
> - *          STAT_RTERIDREG: Failed to get a new rterid value
> - *          STAT_GENDB    : Failed to start an SQL transaction (BEGIN)
> - *          STAT_RTEVRUNS : Failed to register the rteval run into rtevalruns or rtevalruns_details
> - *          STAT_MEASURE  : Failed to register the measurement data into tables their corresponding tables
> - *          STAT_REPMOVE  : Failed to move the report file
> - * @endcode
> - */
> -inline int parse_report(threadData_t *thrdata, parseJob_t *job)
> -{
> -	int syskey = -1, rterid = -1;
> -	int rc = -1;
> -	xmlDoc *repxml = NULL;
> -	char *destfname;
> -
> -	// Check file size - and reject too big files
> -	if( check_filesize(thrdata, job->filename) == 0 ) {
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] (submid: %i) Report file '%s' is too big, rejected",
> -			 thrdata->id, job->submid, job->filename);
> -		return STAT_FTOOBIG;
> -	}
> -
> -
> -	repxml = xmlParseFile(job->filename);
> -	if( !repxml ) {
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] (submid: %i) Could not parse XML file: %s",
> -			 thrdata->id, job->submid, job->filename);
> -	        return STAT_XMLFAIL;
> -	}
> -
> -	pthread_mutex_lock(thrdata->mtx_sysreg);
> -	syskey = db_register_system(thrdata->dbc, thrdata->xslt, repxml);
> -	if( syskey < 0 ) {
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] Failed to register system (submid: %i, XML file: %s)",
> -			 thrdata->id, job->submid, job->filename);
> -		rc = STAT_SYSREG;
> -		pthread_mutex_unlock(thrdata->mtx_sysreg);
> -		goto exit;
> -
> -	}
> -
> -	rterid = db_get_new_rterid(thrdata->dbc);
> -	if( rterid < 0 ) {
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] Failed to register rteval run (submid: %i, XML file: %s)",
> -			 thrdata->id, job->submid, job->filename);
> -		rc = STAT_RTERIDREG;
> -		pthread_mutex_unlock(thrdata->mtx_sysreg);
> -		goto exit;
> -	}
> -	pthread_mutex_unlock(thrdata->mtx_sysreg);
> -
> -	if( db_begin(thrdata->dbc) < 1 ) {
> -		rc = STAT_GENDB;
> -		goto exit;
> -	}
> -
> -	// Create a new filename of where to save the report
> -	destfname = get_destination_path(thrdata->dbc->log, thrdata->destdir, job, rterid);
> -	if( !destfname ) {
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] Failed to generate local report filename for (submid: %i) %s",
> -			 thrdata->id, job->submid, job->filename);
> -		db_rollback(thrdata->dbc);
> -		rc = STAT_UNKNFAIL;
> -		goto exit;
> -	}
> -
> -	if( db_register_rtevalrun(thrdata->dbc, thrdata->xslt, repxml, job->submid,
> -				  syskey, rterid, destfname) < 0 ) {
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] Failed to register rteval run (submid: %i, XML file: %s)",
> -			 thrdata->id, job->submid, job->filename);
> -		db_rollback(thrdata->dbc);
> -		rc = STAT_RTEVRUNS;
> -		goto exit;
> -	}
> -
> -	if( db_register_measurements(thrdata->dbc, thrdata->xslt, repxml, rterid) != 1 ) {
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] Failed to register measurement data (submid: %i, XML file: %s)",
> -			 thrdata->id, job->submid, job->filename);
> -		db_rollback(thrdata->dbc);
> -		rc = STAT_MEASURE;
> -		goto exit;
> -	}
> -
> -	// When all database registrations are done, move the file to it's right place
> -	if( make_report_dir(thrdata->dbc->log, destfname) < 1 ) { // Make sure report directory exists
> -		db_rollback(thrdata->dbc);
> -		rc = STAT_REPMOVE;
> -		goto exit;
> -	}
> -
> -	if( rename(job->filename, destfname) < 0 ) { // Move the file
> -		writelog(thrdata->dbc->log, LOG_ERR,
> -			 "[Thread %i] (submid: %i) Failed to move report file from %s to %s (%s)",
> -			 thrdata->id, job->submid, job->filename, destfname, strerror(errno));
> -		db_rollback(thrdata->dbc);
> -		rc = STAT_REPMOVE;
> -		goto exit;
> -	}
> -	free_nullsafe(destfname);
> -
> -	rc = STAT_SUCCESS;
> -	db_commit(thrdata->dbc);
> -	writelog(thrdata->dbc->log, LOG_INFO,
> -		 "[Thread %i] Report parsed and stored (submid: %i, rterid: %i)",
> -		 thrdata->id, job->submid, rterid);
> - exit:
> -	xmlFreeDoc(repxml);
> -	return rc;
> -}
> -
> -
> -/**
> - * The parser thread.  This thread lives until a shutdown notification is received.  It pulls
> - * messages on a POSIX MQ based message queue containing submission ID and full path to an XML
> - * report to be parsed.
> - *
> - * @param thrargs Contains database connection, XSLT stylesheet, POSXI MQ descriptor, etc
> - *
> - * @return Returns 0 on successful operation, otherwise 1 on errors.
> - */
> -void *parsethread(void *thrargs) {
> -	threadData_t *args = (threadData_t *) thrargs;
> -	parseJob_t jobinfo;
> -	long exitcode = 0;
> -
> -	writelog(args->dbc->log, LOG_DEBUG, "[Thread %i] Starting", args->id);
> -	pthread_mutex_lock(args->mtx_thrcnt);
> -	(*(args->threadcount)) += 1;
> -	pthread_mutex_unlock(args->mtx_thrcnt);
> -
> -	// Polling loop
> -	while( *(args->shutdown) == 0 ) {
> -		int len = 0;
> -		unsigned int prio = 0;
> -
> -		// Check if the database connection is alive before pulling any messages
> -		if( db_ping(args->dbc) != 1 ) {
> -			writelog(args->dbc->log, LOG_EMERG,
> -				 "[Thread %i] Lost database conneciting: Shutting down thread.",
> -				 args->id);
> -
> -			if( *(args->threadcount) <= 1 ) {
> -				writelog(args->dbc->log, LOG_EMERG,
> -					 "No more worker threads available.  "
> -					 "Signaling for complete shutdown!");
> -				kill(getpid(), SIGUSR1);
> -			}
> -			exitcode = 1;
> -			goto exit;
> -		}
> -
> -		// Retrieve a parse job from the message queue
> -		memset(&jobinfo, 0, sizeof(parseJob_t));
> -		errno = 0;
> -		len = mq_receive(args->msgq, (char *)&jobinfo, sizeof(parseJob_t), &prio);
> -		if( (len < 0) && errno != EAGAIN ) {
> -			writelog(args->dbc->log, LOG_CRIT,
> -				 "Could not receive the message from queue: %s",
> -				 strerror(errno));
> -			pthread_exit((void *) 1);
> -		}
> -
> -		// Ignore whatever message if the shutdown flag is set.
> -		if( *(args->shutdown) != 0 ) {
> -			break;
> -		}
> -
> -		// If we have a message, then process the parse job
> -		if( (errno != EAGAIN) && (len > 0) ) {
> -			int res = 0;
> -
> -			writelog(args->dbc->log, LOG_INFO,
> -				 "[Thread %i] Job recieved, submid: %i - %s",
> -				 args->id, jobinfo.submid, jobinfo.filename);
> -
> -			// Mark the job as "in progress", if successful update, continue parsing it
> -			if( db_update_submissionqueue(args->dbc, jobinfo.submid, STAT_INPROG) ) {
> -				res = parse_report(args, &jobinfo);
> -				// Set the status for the submission
> -				db_update_submissionqueue(args->dbc, jobinfo.submid, res);
> -			} else {
> -				writelog(args->dbc->log, LOG_CRIT,
> -					 "Failed to mark submid %i as STAT_INPROG",
> -					 jobinfo.submid);
> -			}
> -		}
> -	}
> -	writelog(args->dbc->log, LOG_DEBUG, "[Thread %i] Shut down", args->id);
> - exit:
> -	pthread_mutex_lock(args->mtx_thrcnt);
> -	(*(args->threadcount)) -= 1;
> -	pthread_mutex_unlock(args->mtx_thrcnt);
> -
> -	pthread_exit((void *) exitcode);
> -}
> diff --git a/server/parser/parsethread.h b/server/parser/parsethread.h
> deleted file mode 100644
> index 90eb658..0000000
> --- a/server/parser/parsethread.h
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   parsethread.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Thu Oct 15 11:52:10 2009
> - *
> - * @brief  Contains the "main" function which a parser threads runs
> - *
> - */
> -
> -#ifndef _PARSETHREAD_H
> -#define _PARSETHREAD_H
> -
> -/**
> - * jbNONE means no job available,
> - * jbAVAIL indicates that parseJob_t contains a job
> -*/
> -typedef enum { jbNONE, jbAVAIL } jobStatus;
> -
> -/**
> - * This struct is used for sending a parse job to a worker thread via POSIX MQ
> - */
> -typedef struct {
> -        jobStatus status;                  /**< Info about if job information*/
> -        unsigned int submid;               /**< Work info: Numeric ID of the job being parsed */
> -        char clientid[256];                /**< Work info: Should contain senders hostname */
> -        char filename[4096];               /**< Work info: Full filename of the report to be parsed */
> -} parseJob_t;
> -
> -
> -void *parsethread(void *thrargs);
> -
> -#endif
> diff --git a/server/parser/pgsql.c b/server/parser/pgsql.c
> deleted file mode 100644
> index 5492d02..0000000
> --- a/server/parser/pgsql.c
> +++ /dev/null
> @@ -1,1093 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   pgsql.c
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Wed Oct 13 17:44:35 2009
> - *
> - * @brief  Database API for the PostgreSQL database.
> - *
> - *
> - */
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <pthread.h>
> -#include <assert.h>
> -#include <errno.h>
> -
> -#include <libpq-fe.h>
> -
> -#include <libxml/parser.h>
> -#include <libxml/xmlsave.h>
> -#include <libxslt/transform.h>
> -#include <libxslt/xsltutils.h>
> -
> -#include <eurephia_nullsafe.h>
> -#include <eurephia_xml.h>
> -#include <eurephia_values.h>
> -#include <configparser.h>
> -#include <xmlparser.h>
> -#include <pgsql.h>
> -#include <log.h>
> -#include <statuses.h>
> -
> -/** forward declaration, to be able to setup dbhelper_func pointers */
> -static char * pgsql_BuildArray(LogContext *log, xmlNode *sql_n);
> -
> -/** Helper functions the xmlparser might beed */
> -static dbhelper_func pgsql_helpers = {
> -        .dbh_FormatArray = &(pgsql_BuildArray)
> -};
> -
> -/**
> - * Connect to a database, based on the given configuration
> - *
> - * @param cfg eurephiaVALUES containing the configuration
> - * @param id  Database connection ID.  Used to identify which thread is doing what with the database
> - * @param log Log context, where all logging will go
> - *
> - * @return Returns a database connection context
> - */
> -dbconn *db_connect(eurephiaVALUES *cfg, unsigned int id, LogContext *log) {
> -	dbconn *ret = NULL;
> -        PGresult *dbr = NULL;
> -
> -	ret = (dbconn *) malloc_nullsafe(log, sizeof(dbconn)+2);
> -	ret->id = id;
> -	ret->log = log;
> -
> -	writelog(log, LOG_DEBUG, "[Connection %i] Connecting to database: server=%s:%s, "
> -		 "database=%s, user=%s", ret->id,
> -		 eGet_value(cfg, "db_server"), eGet_value(cfg, "db_port"),
> -		 eGet_value(cfg, "database"), eGet_value(cfg, "db_username"));
> -	ret->db = PQsetdbLogin(eGet_value(cfg, "db_server"),
> -			   eGet_value(cfg, "db_port"),
> -			   NULL, /* pgopt */
> -			   NULL, /* pgtty */
> -			   eGet_value(cfg, "database"),
> -			   eGet_value(cfg, "db_username"),
> -			   eGet_value(cfg, "db_password"));
> -
> -	if( !ret->db ) {
> -		writelog(log, LOG_EMERG,
> -			 "[Connection %i] Could not connect to the database (unknown reason)", ret->id);
> -		free_nullsafe(ret);
> -		return NULL;
> -	}
> -
> -	if( PQstatus(ret->db) != CONNECTION_OK ) {
> -		writelog(log, LOG_EMERG, "[Connection %i] Failed to connect to the database: %s",
> -			 ret->id, PQerrorMessage(ret->db));
> -		free_nullsafe(ret);
> -		return NULL;
> -	}
> -
> -	// Retrieve the SQL schema version
> -	dbr = PQexec(ret->db,
> -		     "SELECT FLOOR(value::NUMERIC(6,3))*100 " // Convert version string to integer
> -		     "       + to_char(substring(value, position('.' in value)+1)::INTEGER, '00')::INTEGER"
> -		     "  FROM rteval_info WHERE key = 'sql_schema_ver'");
> -	if( !dbr || (PQresultStatus(dbr) != PGRES_TUPLES_OK) || (PQntuples(dbr) != 1) ) {
> -		// Query failed, assuming SQL schema version 1.00 (100).
> -		// SQL schema versions before 1.1 (101) do not have the rteval_info table, thus
> -		// a failure is not completely unexpected.
> -		ret->sqlschemaver = 100;
> -	} else {
> -		ret->sqlschemaver = atoi_nullsafe(PQgetvalue(dbr, 0, 0));
> -		if( ret->sqlschemaver < 100 ) {
> -			ret->sqlschemaver = 100;  // The minimal version - version 1.00.
> -		}
> -	}
> -	if( dbr ) {
> -		PQclear(dbr);
> -	}
> -	init_xmlparser(&pgsql_helpers);
> -	return ret;
> -}
> -
> -
> -/**
> - * Pings the database connection to check if it is alive
> - *
> - * @param dbc  Database connection to ping
> - *
> - * @return Returns 1 if the connection is alive, otherwise 0
> - */
> -int db_ping(dbconn *dbc) {
> -	PGresult *res = NULL;
> -
> -	// Send ping
> -	res = PQexec(dbc->db, "");
> -	PQclear(res);
> -
> -	// Check status
> -	if( PQstatus(dbc->db) != CONNECTION_OK ) {
> -		PQreset(dbc->db);
> -		if( PQstatus(dbc->db) != CONNECTION_OK ) {
> -			writelog(dbc->log, LOG_EMERG,
> -				 "[Connection %i] Database error - Lost connection: %s",
> -				 dbc->id, PQerrorMessage(dbc->db));
> -			return 0;
> -		} else {
> -			writelog(dbc->log, LOG_CRIT,
> -				 "[Conncetion %i] Database connection restored", dbc->id);
> -		}
> -	}
> -	return 1;
> -}
> -
> -
> -/**
> - * Disconnect from the database
> - *
> - * @param dbc Pointer to the database handle to be disconnected.
> - */
> -void db_disconnect(dbconn *dbc) {
> -	if( dbc && dbc->db ) {
> -		writelog(dbc->log, LOG_DEBUG, "[Connection %i] Disconnecting from database", dbc->id);
> -		PQfinish(dbc->db);
> -		dbc->db = NULL;
> -		dbc->log = NULL;
> -	}
> -	free_nullsafe(dbc);
> -}
> -
> -
> -/**
> - * This function does INSERT SQL queries based on an XML document (sqldata) which contains
> - * all information about table, fields and records to be inserted.  For security and performance,
> - * this function uses prepared SQL statements.
> - *
> - * This function is PostgreSQL specific.
> - *
> - * @param dbc     Database handler to a PostgreSQL
> - * @param sqldoc  sqldata XML document containing the data to be inserted.
> - *
> - * The sqldata XML document must be formated like this:
> - * @code
> - * <sqldata table="{table name}" [key="{field name}">
> - *    <fields>
> - *       <field fid="{integer}">{field name}</field>
> - *       ...
> - *       ...
> - *       <field fid="{integer_n}">{field name 'n'}</field>
> - *    </fields>
> - *    <records>
> - *       <record>
> - *          <value fid="{integer} [type="{data type}"] [hash="{hash type}">{value for field 'fid'</value>
> - *          ...
> - *          ...
> - *          <value fid="{integer_n}">{value for field 'fid_n'</value>
> - *       </record>
> - *       ...
> - *       ...
> - *       ...
> - *    </records>
> - * </sqldata>
> - * @endcode
> - * The 'sqldata' root tag must contain a 'table' attribute.  This must contain the a name of a table
> - * in the database.  If the 'key' attribute is set, the function will return the that field value for
> - * each INSERT query, using INSERT ... RETURNING {field name}.  The sqldata root tag must then have
> - * two children, 'fields' and 'records'.
> - *
> - * The 'fields' tag need to contain 'field' children tags for each field to insert data for.  Each
> - * field in the fields tag must be assigned a unique integer.
> - *
> - * The 'records' tag need to contain 'record' children tags for each record to be inserted.  Each
> - * record tag needs to have 'value' tags for each field which is found in the 'fields' section.
> - *
> - * The 'value' tags must have a 'fid' attribute.  This is the link between the field name in the
> - * 'fields' section and the value to be inserted.
> - *
> - * The 'type' attribute may be used as well, but the only supported data type supported to this
> - * attribute is 'xmlblob'.  In this case, the contents of the 'value' tag must be more XML tags.
> - * These tags will then be serialised to a string which is inserted into the database.
> - *
> - * The 'hash' attribute of the 'value' tag can be set to 'sha1'.  This will make do a SHA1 hash
> - * calculation of the value and this hash value will be used for the insert.
> - *
> - * @return Returns an eurephiaVALUES list containing information about each record which was inserted.
> - *         If the 'key' attribute is not set in the 'sqldata' tag, the OID value of each record will be
> - *         saved.  If the table do not support OIDs, the value will be '0'.  Otherwise the contents of
> - *         the defined field name will be returned.  If one of the INSERT queries fails, it will abort
> - *         further processing and the function will return NULL.
> - */
> -eurephiaVALUES *pgsql_INSERT(dbconn *dbc, xmlDoc *sqldoc) {
> -	xmlNode *root_n = NULL, *fields_n = NULL, *recs_n = NULL, *ptr_n = NULL, *val_n = NULL;
> -	char **field_ar = NULL, *fields = NULL, **value_ar = NULL, *values = NULL, *table = NULL, 
> -		tmp[20], *sql = NULL, *key = NULL, oid[34];
> -
> -	unsigned int fieldcnt = 0, *field_idx, i = 0, schemaver = 0;
> -	PGresult *dbres = NULL;
> -	eurephiaVALUES *res = NULL;
> -
> -	assert( (dbc != NULL) && (sqldoc != NULL) );
> -
> -	root_n = xmlDocGetRootElement(sqldoc);
> -	if( !root_n || (xmlStrcmp(root_n->name, (xmlChar *) "sqldata") != 0) ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Input XML document is not a valid sqldata document", dbc->id);
> -		return NULL;
> -	}
> -
> -	table = xmlGetAttrValue(root_n->properties, "table");
> -	if( !table ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Input XML document is missing table reference", dbc->id);
> -		return NULL;
> -	}
> -
> -	schemaver = sqldataGetRequiredSchemaVer(dbc->log, root_n);
> -	if( schemaver < 100 ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Failed parsing required SQL schema version", dbc->id);
> -		return NULL;
> -	}
> -	if( schemaver > dbc->sqlschemaver ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Cannot process data for the '%s' table.  "
> -			 "The needed SQL schema version is %i, while the database is using version %i",
> -			 dbc->id, table, schemaver, dbc->sqlschemaver);
> -		return NULL;
> -	}
> -
> -	key = xmlGetAttrValue(root_n->properties, "key");
> -
> -	fields_n = xmlFindNode(root_n, "fields");
> -	recs_n = xmlFindNode(root_n, "records");
> -	if( !fields_n || !recs_n ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Input XML document is missing either <fields/> or <records/>",
> -			 dbc->id);
> -		return NULL;
> -	}
> -
> -	// Count number of fields
> -	foreach_xmlnode(fields_n->children, ptr_n) {
> -		if( ptr_n->type == XML_ELEMENT_NODE ) {
> -			fieldcnt++;
> -		}
> -	}
> -
> -	// Generate lists of all fields and a index mapping table
> -	field_idx = calloc(fieldcnt+1, sizeof(unsigned int));
> -	field_ar = calloc(fieldcnt+1, sizeof(char *));
> -	foreach_xmlnode(fields_n->children, ptr_n) {
> -		if( ptr_n->type != XML_ELEMENT_NODE ) {
> -			continue;
> -		}
> -
> -		field_idx[i] = atoi_nullsafe(xmlGetAttrValue(ptr_n->properties, "fid"));
> -		field_ar[i] = xmlExtractContent(ptr_n);
> -		i++;
> -	}
> -
> -	// Generate strings with field names and value place holders
> -	// for a prepared SQL statement
> -	fields = malloc_nullsafe(dbc->log, 3);
> -	values = malloc_nullsafe(dbc->log, 6*(fieldcnt+1));
> -	strcpy(fields, "(");
> -	strcpy(values, "(");
> -	int len = 3;
> -	for( i = 0; i < fieldcnt; i++ ) {
> -		// Prepare VALUES section
> -		snprintf(tmp, 6, "$%i", i+1);
> -		append_str(values, tmp, (6*fieldcnt));
> -
> -		// Prepare fields section
> -		len += strlen_nullsafe(field_ar[i])+2;
> -		fields = realloc(fields, len);
> -		strcat(fields, field_ar[i]);
> -
> -		if( i < (fieldcnt-1) ) {
> -			strcat(fields, ",");
> -			strcat(values, ",");
> -		}
> -	}
> -	strcat(fields, ")");
> -	strcat(values, ")");
> -
> -	// Build up the SQL query
> -	sql = malloc_nullsafe(dbc->log,
> -			      strlen_nullsafe(fields)
> -			      + strlen_nullsafe(values)
> -			      + strlen_nullsafe(table)
> -			      + strlen_nullsafe(key)
> -			      + 34 /* INSERT INTO  VALUES RETURNING*/
> -			      );
> -	sprintf(sql, "INSERT INTO %s %s VALUES %s", table, fields, values);
> -	if( key ) {
> -		strcat(sql, " RETURNING ");
> -		strcat(sql, key);
> -	}
> -
> -	// Create a prepared SQL query
> -#ifdef DEBUG_SQL
> -	writelog(dbc->log, LOG_DEBUG, "[Connection %i] Preparing SQL statement: %s", dbc->id, sql);
> -#endif
> -	dbres = PQprepare(dbc->db, "", sql, fieldcnt, NULL);
> -	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Failed to prepare SQL query: %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -		PQclear(dbres);
> -		goto exit;
> -	}
> -	PQclear(dbres);
> -
> -	// Loop through all records and generate SQL statements
> -	res = eCreate_value_space(dbc->log, 1);
> -	memset(&oid, 0, 34);
> -	foreach_xmlnode(recs_n->children, ptr_n) {
> -		if( ptr_n->type != XML_ELEMENT_NODE ) {
> -			continue;
> -		}
> -
> -		// Loop through all value nodes in each record node and get the values for each field
> -		value_ar = calloc(fieldcnt, sizeof(char *));
> -		i = 0;
> -		foreach_xmlnode(ptr_n->children, val_n) {
> -			char *fid_s = NULL;
> -			int fid = -1;
> -
> -			if( i > fieldcnt ) {
> -				break;
> -			}
> -
> -			if( val_n->type != XML_ELEMENT_NODE ) {
> -				continue;
> -			}
> -
> -			fid_s = xmlGetAttrValue(val_n->properties, "fid");
> -			fid = atoi_nullsafe(fid_s);
> -			if( (fid_s == NULL) || (fid < 0) ) {
> -				continue;
> -			}
> -			value_ar[field_idx[i]] = sqldataExtractContent(dbc->log, val_n);
> -			i++;
> -		}
> -
> -		// Insert the record into the database
> -		dbres = PQexecPrepared(dbc->db, "", fieldcnt,
> -				       (const char * const *)value_ar, NULL, NULL, 0);
> -		if( PQresultStatus(dbres) != (key ? PGRES_TUPLES_OK : PGRES_COMMAND_OK) ) {
> -			writelog(dbc->log, LOG_ALERT, "[Connection %i] Failed to do SQL INSERT query: %s",
> -				 dbc->id, PQresultErrorMessage(dbres));
> -			PQclear(dbres);
> -			eFree_values(res);
> -			res = NULL;
> -
> -			// Free up the memory we've used for this record
> -			for( i = 0; i < fieldcnt; i++ ) {
> -				free_nullsafe(value_ar[i]);
> -			}
> -			free_nullsafe(value_ar);
> -			goto exit;
> -		}
> -		if( key ) {
> -			// If the /sqldata/@key attribute was set, fetch the returning ID
> -			eAdd_value(res, key, PQgetvalue(dbres, 0, 0));
> -		} else {
> -			snprintf(oid, 33, "%ld%c", (unsigned long int) PQoidValue(dbres), 0);
> -			eAdd_value(res, "oid", oid);
> -		}
> -		PQclear(dbres);
> -
> -		// Free up the memory we've used for this record
> -		for( i = 0; i < fieldcnt; i++ ) {
> -			free_nullsafe(value_ar[i]);
> -		}
> -		free_nullsafe(value_ar);
> -	}
> -
> - exit:
> -	free_nullsafe(sql);
> -	free_nullsafe(fields);
> -	free_nullsafe(values);
> -	free_nullsafe(field_ar);
> -	free_nullsafe(field_idx);
> -	return res;
> -}
> -
> -/**
> - * @copydoc sqldataValueArray()
> - */
> -static char * pgsql_BuildArray(LogContext *log, xmlNode *sql_n) {
> -	char *ret = NULL, *ptr = NULL;
> -	xmlNode *node = NULL;
> -	size_t retlen = 0;
> -
> -	ret = malloc_nullsafe(log, 2);
> -	if( ret == NULL ) {
> -		writelog(log, LOG_ERR,
> -			 "Failed to allocate memory for a new PostgreSQL array");
> -		return NULL;
> -	}
> -	strncat(ret, "{", 1);
> -
> -	/* Iterate all ./value/value elements and build up a PostgreSQL specific array */
> -	foreach_xmlnode(sql_n->children, node) {
> -		if( (node->type != XML_ELEMENT_NODE)
> -		    || xmlStrcmp(node->name, (xmlChar *) "value") != 0 ) {
> -			// Skip uninteresting nodes
> -			continue;
> -		}
> -		ptr = sqldataValueHash(log, node);
> -		if( ptr ) {
> -			retlen += strlen(ptr) + 4;
> -			ret = realloc(ret, retlen);
> -			if( ret == NULL ) {
> -				writelog(log, LOG_ERR,
> -					 "Failed to allocate memory to expand "
> -					 "array to include '%s'", ptr);
> -				free_nullsafe(ret);
> -				free_nullsafe(ptr);
> -				return NULL;
> -			}
> -			/* Newer PostgreSQL servers expects numbers to be without quotes */
> -			if( isNumber(ptr) == 0 ) {
> -				/* Data is a string */
> -				strncat(ret, "'", 1);
> -				strncat(ret, ptr, strlen(ptr));
> -				strncat(ret, "',", 2);
> -			} else {
> -				/* Data is a number */
> -				strncat(ret, ptr, strlen(ptr));
> -				strncat(ret, ",", 1);
> -			}
> -			free_nullsafe(ptr);
> -		}
> -	}
> -	/* Replace the last comma with a close-array marker */
> -	ret[strlen(ret)-1] = '}';
> -	ret[strlen(ret)] = 0;
> -	return ret;
> -}
> -
> -
> -/**
> - * Start an SQL transaction (SQL BEGIN)
> - *
> - * @param dbc Database handler where to perform the SQL queries
> - *
> - * @return Returns 1 on success, otherwise -1 is returned
> - */
> -int db_begin(dbconn *dbc) {
> -	PGresult *dbres = NULL;
> -
> -	dbres = PQexec(dbc->db, "BEGIN");
> -	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Failed to do prepare a transaction (BEGIN): %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -		PQclear(dbres);
> -		return -1;
> -	}
> -	PQclear(dbres);
> -	return 1;
> -}
> -
> -
> -/**
> - * Commits an SQL transaction (SQL COMMIT)
> - *
> - * @param dbc Database handler where to perform the SQL queries
> - *
> - * @return Returns 1 on success, otherwise -1 is returned
> - */
> -int db_commit(dbconn *dbc) {
> -	PGresult *dbres = NULL;
> -
> -	dbres = PQexec(dbc->db, "COMMIT");
> -	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Failed to do commit a database transaction (COMMIT): %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -		PQclear(dbres);
> -		return -1;
> -	}
> -	PQclear(dbres);
> -	return 1;
> -}
> -
> -
> -/**
> - * Aborts an SQL transaction (SQL ROLLBACK/ABORT)
> - *
> - * @param dbc Database handler where to perform the SQL queries
> - *
> - * @return Returns 1 on success, otherwise -1 is returned
> - */
> -int db_rollback(dbconn *dbc) {
> -	PGresult *dbres = NULL;
> -
> -	dbres = PQexec(dbc->db, "ROLLBACK");
> -	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
> -		writelog(dbc->log, LOG_CRIT,
> -			 "[Connection %i] Failed to do abort/rollback a transaction (ROLLBACK): %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -		PQclear(dbres);
> -		return -1;
> -	}
> -	PQclear(dbres);
> -	return 1;
> -}
> -
> -
> -/**
> - * This function blocks until a notification is received from the database
> - *
> - * @param dbc        Database connection
> - * @param shutdown   Pointer to the shutdown flag.  Used to avoid reporting false errors.
> - * @param listenfor  Name to be used when calling LISTEN
> - *
> - * @return Returns 1 on successful waiting, otherwise -1
> - */
> -int db_wait_notification(dbconn *dbc, const int *shutdown, const char *listenfor) {
> -	int sock, ret = 0;
> -	PGresult *dbres = NULL;
> -	PGnotify *notify = NULL;
> -	fd_set input_mask;
> -	char *sql = NULL;
> -
> -	sql = malloc_nullsafe(dbc->log, strlen_nullsafe(listenfor) + 12);
> -	assert( sql != NULL );
> -
> -	// Initiate listening
> -	sprintf(sql, "LISTEN %s", listenfor);
> -	dbres = PQexec(dbc->db, sql);
> -	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
> -		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -		free_nullsafe(sql);
> -		PQclear(dbres);
> -		return -1;
> -	}
> -	PQclear(dbres);
> -
> -	// Start listening and waiting
> -	while( ret == 0 ) {
> -		sock = PQsocket(dbc->db);
> -		if (sock < 0) {
> -			// shouldn't happen
> -			ret = -1;
> -			break;
> -		}
> -
> -		// Wait for something to happen on the database socket
> -		FD_ZERO(&input_mask);
> -		FD_SET(sock, &input_mask);
> -		if (select(sock + 1, &input_mask, NULL, NULL, NULL) < 0) {
> -			// If the shutdown flag is set, select() will fail due to a signal.  Only
> -			// report errors if we're not shutting down, or else exit normally with
> -			// successful waiting.
> -			if( *shutdown == 0 ) {
> -				writelog(dbc->log, LOG_CRIT, "[Connection %i] select() failed: %s",
> -					 dbc->id, strerror(errno));
> -				ret = -1;
> -				goto exit;
> -			} else {
> -				ret = 1;
> -			}
> -			break;
> -		}
> -
> -		// Process the event
> -		PQconsumeInput(dbc->db);
> -
> -		// Check if connection still is valid
> -		if( PQstatus(dbc->db) != CONNECTION_OK ) {
> -			PQreset(dbc->db);
> -			if( PQstatus(dbc->db) != CONNECTION_OK ) {
> -				writelog(dbc->log, LOG_EMERG,
> -					 "[Connection %i] Database connection died: %s",
> -					 dbc->id, PQerrorMessage(dbc->db));
> -				ret = -1;
> -				goto exit;
> -			}
> -			writelog(dbc->log, LOG_CRIT,
> -				 "[Connection %i] Database connection restored", dbc->id);
> -		}
> -
> -		while ((notify = PQnotifies(dbc->db)) != NULL) {
> -			// If a notification was received, inform and exit with success.
> -			writelog(dbc->log, LOG_DEBUG,
> -				 "[Connection %i] Received notfication from pid %d",
> -				 dbc->id, notify->be_pid);
> -			PQfreemem(notify);
> -			ret = 1;
> -			break;
> -		}
> -	}
> -
> -	// Stop listening when we exit
> -	sprintf(sql, "UNLISTEN %s", listenfor);
> -	dbres = PQexec(dbc->db, sql);
> -	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
> -		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -		free_nullsafe(sql);
> -		ret = -1;
> -	}
> -	free_nullsafe(sql);
> -	PQclear(dbres);
> -
> - exit:
> -	return ret;
> -}
> -
> -
> -/**
> - * Retrive the first available submitted report
> - *
> - * @param dbc   Database connection
> - * @param mtx   pthread_mutex to avoid parallel access to the submission queue table, to avoid
> - *              the same job being retrieved multiple times.
> - *
> - * @return Returns a pointer to a parseJob_t struct, with the parse job info on success, otherwise NULL
> - */
> -parseJob_t *db_get_submissionqueue_job(dbconn *dbc, pthread_mutex_t *mtx) {
> -	parseJob_t *job = NULL;
> -	PGresult *res = NULL;
> -	char sql[4098];
> -
> -	job = (parseJob_t *) malloc_nullsafe(dbc->log, sizeof(parseJob_t));
> -
> -	// Get the first available submission
> -	memset(&sql, 0, 4098);
> -	snprintf(sql, 4096,
> -		 "SELECT submid, filename, clientid"
> -		 "  FROM submissionqueue"
> -		 " WHERE status = %i"
> -		 " ORDER BY submid"
> -		 " LIMIT 1",
> -		 STAT_NEW);
> -
> -	pthread_mutex_lock(mtx);
> -	res = PQexec(dbc->db, sql);
> -	if( PQresultStatus(res) != PGRES_TUPLES_OK ) {
> -		pthread_mutex_unlock(mtx);
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Failed to query submission queue (SELECT): %s",
> -			 dbc->id, PQresultErrorMessage(res));
> -		PQclear(res);
> -		free_nullsafe(job);
> -		return NULL;
> -	}
> -
> -	if( PQntuples(res) == 1 ) {
> -		job->status = jbAVAIL;
> -		job->submid = atoi_nullsafe(PQgetvalue(res, 0, 0));
> -		snprintf(job->filename, 4095, "%.4094s", PQgetvalue(res, 0, 1));
> -		snprintf(job->clientid,  255, "%.254s", PQgetvalue(res, 0, 2));
> -
> -		// Update the submission queue status
> -		if( db_update_submissionqueue(dbc, job->submid, STAT_ASSIGNED) < 1 ) {
> -			pthread_mutex_unlock(mtx);
> -			writelog(dbc->log, LOG_ALERT, "[Connection %i] Failed to update "
> -				 "submission queue statis to STAT_ASSIGNED", dbc->id);
> -			free_nullsafe(job);
> -			return NULL;
> -		}
> -	} else {
> -		job->status = jbNONE;
> -	}
> -	pthread_mutex_unlock(mtx);
> -	PQclear(res);
> -	return job;
> -}
> -
> -
> -/**
> - * Updates the submission queue table with the new status and the appropriate timestamps
> - *
> - * @param dbc     Database handler to the rteval database
> - * @param submid  Submission ID to update
> - * @param status  The new status
> - *
> - * @return Returns 1 on success, 0 on invalid status ID and -1 on database errors.
> - */
> -int db_update_submissionqueue(dbconn *dbc, unsigned int submid, int status) {
> -	PGresult *res = NULL;
> -	char sql[4098];
> -
> -	memset(&sql, 0, 4098);
> -	switch( status ) {
> -	case STAT_ASSIGNED:
> -	case STAT_RTERIDREG:
> -	case STAT_REPMOVE:
> -	case STAT_XMLFAIL:
> -	case STAT_FTOOBIG:
> -		snprintf(sql, 4096,
> -			 "UPDATE submissionqueue SET status = %i"
> -			 " WHERE submid = %i", status, submid);
> -		break;
> -
> -	case STAT_INPROG:
> -		snprintf(sql, 4096,
> -			 "UPDATE submissionqueue SET status = %i, parsestart = NOW()"
> -			 " WHERE submid = %i", status, submid);
> -		break;
> -
> -	case STAT_SUCCESS:
> -	case STAT_UNKNFAIL:
> -	case STAT_SYSREG:
> -	case STAT_GENDB:
> -	case STAT_RTEVRUNS:
> -	case STAT_MEASURE:
> -		snprintf(sql, 4096,
> -			 "UPDATE submissionqueue SET status = %i, parseend = NOW() WHERE submid = %i",
> -			 status, submid);
> -		break;
> -
> -	default:
> -	case STAT_NEW:
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Invalid status (%i) attempted to set on submid %i",
> -			 dbc->id, status, submid);
> -		return 0;
> -	}
> -
> -	res = PQexec(dbc->db, sql);
> -	if( !res ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Unkown error when updating submid %i to status %i",
> -			 dbc->id, submid, status);
> -		return -1;
> -	} else if( PQresultStatus(res) != PGRES_COMMAND_OK ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Failed to UPDATE submissionqueue (submid: %i, status: %i): %s",
> -			 dbc->id, submid, status, PQresultErrorMessage(res));
> -		PQclear(res);
> -		return -1;
> -	}
> -	PQclear(res);
> -	return 1;
> -}
> -
> -
> -/**
> - * Registers information into the 'systems' and 'systems_hostname' tables, based on the
> - * summary/report XML file from rteval.
> - *
> - * @param dbc        Database handler where to perform the SQL queries
> - * @param xslt       A pointer to a parsed 'xmlparser.xsl' XSLT template
> - * @param summaryxml The XML report from rteval
> - *
> - * @return Returns a value > 0 on success, which is a unique reference to the system of the report.
> - *         If the function detects that this system is already registered, the 'syskey' reference will
> - *         be reused.  On errors, -1 will be returned.
> - */
> -int db_register_system(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml) {
> -	PGresult *dbres = NULL;
> -	eurephiaVALUES *dbdata = NULL;
> -	xmlDoc *sysinfo_d = NULL, *hostinfo_d = NULL;
> -	parseParams prms;
> -	char sqlq[4098];
> -	char *sysid = NULL;  // SHA1 value of the system id
> -	char *ipaddr = NULL, *hostname = NULL;
> -	int syskey = -1;
> -
> -	memset(&prms, 0, sizeof(parseParams));
> -	prms.table = "systems";
> -	sysinfo_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
> -	if( !sysinfo_d ) {
> -		writelog(dbc->log, LOG_ERR, "[Connection %i] Could not parse the input XML data", dbc->id);
> -		syskey= -1;
> -		goto exit;
> -	}
> -	sysid = sqldataGetValue(dbc->log, sysinfo_d, "sysid", 0);
> -	if( !sysid ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Could not retrieve the sysid field from the input XML", dbc->id);
> -		syskey= -1;
> -		goto exit;
> -	}
> -
> -	memset(&sqlq, 0, 4098);
> -	snprintf(sqlq, 4096, "SELECT syskey FROM systems WHERE sysid = '%.256s'", sysid);
> -	free_nullsafe(sysid);
> -	dbres = PQexec(dbc->db, sqlq);
> -	if( PQresultStatus(dbres) != PGRES_TUPLES_OK ) {
> -		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -		writelog(dbc->log, LOG_DEBUG, "[Connection %i] Failing SQL query: %s",
> -			 dbc->id, sqlq);
> -		PQclear(dbres);
> -		syskey= -1;
> -		goto exit;
> -	}
> -
> -	if( PQntuples(dbres) == 0 ) {  // No record found, need to register this system
> -		PQclear(dbres);
> -
> -		dbdata = pgsql_INSERT(dbc, sysinfo_d);
> -		if( !dbdata ) {
> -			syskey= -1;
> -			goto exit;
> -		}
> -		if( (eCount(dbdata) != 1) || !dbdata->val ) { // Only one record should be registered
> -			writelog(dbc->log, LOG_ALERT,
> -				 "[Connection %i] Failed to register the system", dbc->id);
> -			eFree_values(dbdata);
> -			syskey= -1;
> -			goto exit;
> -		}
> -		syskey = atoi_nullsafe(dbdata->val);
> -		hostinfo_d = sqldataGetHostInfo(dbc->log, xslt, summaryxml, syskey, &hostname, &ipaddr);
> -		if( !hostinfo_d ) {
> -			syskey = -1;
> -			goto exit;
> -		}
> -		eFree_values(dbdata);
> -
> -		dbdata = pgsql_INSERT(dbc, hostinfo_d);
> -		syskey = (dbdata ? syskey : -1);
> -		eFree_values(dbdata);
> -
> -	} else if( PQntuples(dbres) == 1 ) { // System found - check if the host IP is known or not
> -		syskey = atoi_nullsafe(PQgetvalue(dbres, 0, 0));
> -		hostinfo_d = sqldataGetHostInfo(dbc->log, xslt, summaryxml, syskey, &hostname, &ipaddr);
> -		if( !hostinfo_d ) {
> -			syskey = -1;
> -			goto exit;
> -		}
> -		PQclear(dbres);
> -
> -		// Check if this hostname and IP address is registered
> -		snprintf(sqlq, 4096,
> -			 "SELECT syskey FROM systems_hostname"
> -			 " WHERE hostname='%.256s'",
> -			 hostname);
> -
> -		if( ipaddr ) {
> -			append_str(sqlq, "AND ipaddr='", 4028);
> -			append_str(sqlq, ipaddr, 4092);
> -			append_str(sqlq, "'", 4096);
> -		} else {
> -			append_str(sqlq, "AND ipaddr IS NULL", 4096);
> -		}
> -
> -		dbres = PQexec(dbc->db, sqlq);
> -		if( PQresultStatus(dbres) != PGRES_TUPLES_OK ) {
> -			writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
> -				 dbc->id, PQresultErrorMessage(dbres));
> -			writelog(dbc->log, LOG_DEBUG, "[Connection %i] Failing SQL query: %s",
> -				 dbc->id, sqlq);
> -			PQclear(dbres);
> -			syskey= -1;
> -			goto exit;
> -		}
> -
> -		if( PQntuples(dbres) == 0 ) { // Not registered, then register it
> -			dbdata = pgsql_INSERT(dbc, hostinfo_d);
> -			syskey = (dbdata ? syskey : -1);
> -			eFree_values(dbdata);
> -		}
> -		PQclear(dbres);
> -	} else {
> -		// Critical -- system IDs should not be registered more than once
> -		writelog(dbc->log, LOG_CRIT, "[Connection %i] Multiple systems registered (%s)",
> -			 dbc->id, sqlq);
> -		syskey= -1;
> -	}
> -
> - exit:
> -	free_nullsafe(hostname);
> -	free_nullsafe(ipaddr);
> -	if( sysinfo_d ) {
> -		xmlFreeDoc(sysinfo_d);
> -	}
> -	if( hostinfo_d ) {
> -		xmlFreeDoc(hostinfo_d);
> -	}
> -	return syskey;
> -}
> -
> -
> -/**
> - * Retrieves the next available rteval run ID (rterid)
> - *
> - * @param dbc  Database handler where to perform the SQL query
> - *
> - * @return Returns a value > 0 on success, containing the assigned rterid value.  Otherwise -1 is returned.
> - */
> -int db_get_new_rterid(dbconn *dbc) {
> -	PGresult *dbres = NULL;
> -	int rterid = 0;
> -
> -	dbres = PQexec(dbc->db, "SELECT nextval('rtevalruns_rterid_seq')");
> -	if( (PQresultStatus(dbres) != PGRES_TUPLES_OK) || (PQntuples(dbres) != 1) ) {
> -		rterid = -1;
> -	} else {
> -		rterid = atoi_nullsafe(PQgetvalue(dbres, 0, 0));
> -	}
> -
> -	if( rterid < 1 ) {
> -		writelog(dbc->log, LOG_CRIT,
> -			 "[Connection %i] Failed to retrieve a new rterid value", dbc->id);
> -	}
> -	if( rterid < 0 ) {
> -		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
> -			 dbc->id, PQresultErrorMessage(dbres));
> -	}
> -	PQclear(dbres);
> -	return rterid;
> -}
> -
> -
> -/**
> - * Registers information into the 'rtevalruns' and 'rtevalruns_details' tables
> - *
> - * @param dbc           Database handler where to perform the SQL queries
> - * @param xslt          A pointer to a parsed 'xmlparser.xsl' XSLT template
> - * @param summaryxml    The XML report from rteval
> - * @param submid        Submission ID, referencing the record in the submissionqueue table.
> - * @param syskey        A positive integer containing the return value from db_register_system()
> - * @param rterid        A positive integer containing the return value from db_get_new_rterid()
> - * @param report_fname  A string containing the filename of the report.
> - *
> - * @return Returns 1 on success, otherwise -1 is returned.
> - */
> -int db_register_rtevalrun(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml,
> -			  unsigned int submid, int syskey, int rterid, const char *report_fname)
> -{
> -	int ret = -1;
> -	xmlDoc *rtevalrun_d = NULL, *rtevalrundets_d = NULL;
> -	parseParams prms;
> -	eurephiaVALUES *dbdata = NULL;
> -
> -	// Parse the rtevalruns information
> -	memset(&prms, 0, sizeof(parseParams));
> -	prms.table = "rtevalruns";
> -	prms.syskey = syskey;
> -	prms.rterid = rterid;
> -	prms.submid = submid;
> -	prms.report_filename = report_fname;
> -	rtevalrun_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
> -	if( !rtevalrun_d ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Could not parse the input XML data", dbc->id);
> -		ret = -1;
> -		goto exit;
> -	}
> -
> -	// Register the rteval run information
> -	dbdata = pgsql_INSERT(dbc, rtevalrun_d);
> -	if( !dbdata ) {
> -		ret = -1;
> -		goto exit;
> -	}
> -
> -	if( eCount(dbdata) != 1 ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Failed to register the rteval run", dbc->id);
> -		ret = -1;
> -		eFree_values(dbdata);
> -		goto exit;
> -	}
> -	eFree_values(dbdata);
> -
> -	// Parse the rtevalruns_details information
> -	memset(&prms, 0, sizeof(parseParams));
> -	prms.table = "rtevalruns_details";
> -	prms.rterid = rterid;
> -	rtevalrundets_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
> -	if( !rtevalrundets_d ) {
> -		writelog(dbc->log, LOG_ERR,
> -			 "[Connection %i] Could not parse the input XML data (rtevalruns_details)",
> -			 dbc->id);
> -		ret = -1;
> -		goto exit;
> -	}
> -
> -	// Register the rteval_details information
> -	dbdata = pgsql_INSERT(dbc, rtevalrundets_d);
> -	if( !dbdata ) {
> -		ret = -1;
> -		goto exit;
> -	}
> -
> -	// Check that only one record was inserted
> -	if( eCount(dbdata) != 1 ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] Failed to register the rteval run details", dbc->id);
> -		ret = -1;
> -	}
> -	eFree_values(dbdata);
> -	ret = 1;
> - exit:
> -	if( rtevalrun_d ) {
> -		xmlFreeDoc(rtevalrun_d);
> -	}
> -	if( rtevalrundets_d ) {
> -		xmlFreeDoc(rtevalrundets_d);
> -	}
> -	return ret;
> -}
> -
> -
> -/**
> - * Registers data returned from measurement results into the database.
> - *
> - * @param dbc        Database handler where to perform the SQL queries
> - * @param xslt       A pointer to a parsed 'xmlparser.xsl' XSLT template
> - * @param summaryxml The XML report from rteval
> - * @param rterid     A positive integer referencing the rteval run ID, returned from db_register_rtevalrun()
> - *
> - * @return Returns 1 on success, otherwise -1
> - */
> -int db_register_measurements(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml, int rterid) {
> -	int result = -1;
> -	xmlDoc *meas_d = NULL;
> -	parseParams prms;
> -	eurephiaVALUES *dbdata = NULL;
> -	int measrecs = 0;
> -        char *tbl = NULL;
> -	int i;
> -
> -	memset(&prms, 0, sizeof(parseParams));
> -	prms.rterid = rterid;
> -
> -	// Loop through all configured measurement tables and process each table
> -        i = 0;
> -        for_array_str(tbl, i, dbc->measurement_tbls) {
> -                writelog(dbc->log, LOG_DEBUG, "Processing measurement table '%s'", tbl);
> -		prms.table = tbl;
> -		meas_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
> -		if( meas_d && meas_d->children ) {
> -			// Insert SQL data which was found and generated
> -			dbdata = pgsql_INSERT(dbc, meas_d);
> -			if( !dbdata ) {
> -				result = -1;
> -				xmlFreeDoc(meas_d);
> -				goto exit;
> -			}
> -
> -			if (eCount(dbdata) > 0) {
> -				measrecs++;
> -			}
> -			eFree_values(dbdata);
> -		}
> -		if( meas_d ) {
> -			xmlFreeDoc(meas_d);
> -		}
> -	}
> -
> -	// Report error if not enough cyclictest data is registered.
> -	if( measrecs < 1 ) {
> -		writelog(dbc->log, LOG_ALERT,
> -			 "[Connection %i] No cyclictest raw data or histogram data registered", dbc->id);
> -		result = -1;
> -	} else {
> -		result = 1;
> -	}
> - exit:
> -	return result;
> -}
> diff --git a/server/parser/pgsql.h b/server/parser/pgsql.h
> deleted file mode 100644
> index d8be135..0000000
> --- a/server/parser/pgsql.h
> +++ /dev/null
> @@ -1,58 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   pgsql.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Wed Oct 13 17:44:35 2009
> - *
> - * @brief  Database API for the PostgreSQL database.
> - *
> - *
> - */
> -
> -#ifndef _RTEVAL_PGSQL_H
> -#define _RTEVAL_PGSQL_H
> -
> -#include <libpq-fe.h>
> -#include <libxml/parser.h>
> -#include <libxslt/transform.h>
> -
> -#include <log.h>
> -#include <eurephia_values.h>
> -#include <parsethread.h>
> -#include <xmlparser.h>
> -
> -/**
> - *  A unified database abstraction layer, providing log support
> - */
> -typedef struct {
> -	unsigned int id;           /**< Unique connection ID, used for debugging */
> -	LogContext *log;           /**< Initialised log context */
> -	PGconn *db;                /**< Database connection handler */
> -	unsigned int sqlschemaver; /**< SQL schema version, retrieved from rteval_info table */
> -	array_str_t *measurement_tbls; /**< Measurement tables to process */
> -} dbconn;
> -
> -/* Generic database function */
> -dbconn *db_connect(eurephiaVALUES *cfg, unsigned int id, LogContext *log);
> -int db_ping(dbconn *dbc);
> -void db_disconnect(dbconn *dbc);
> -int db_begin(dbconn *dbc);
> -int db_commit(dbconn *dbc);
> -int db_rollback(dbconn *dbc);
> -
> -/* rteval specific database functions */
> -int db_wait_notification(dbconn *dbc, const int *shutdown, const char *listenfor);
> -parseJob_t *db_get_submissionqueue_job(dbconn *dbc, pthread_mutex_t *mtx);
> -int db_update_submissionqueue(dbconn *dbc, unsigned int submid, int status);
> -int db_register_system(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml);
> -int db_get_new_rterid(dbconn *dbc);
> -int db_register_rtevalrun(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml,
> -			  unsigned int submid, int syskey, int rterid, const char *report_fname);
> -int db_register_measurements(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml, int rterid);
> -
> -#endif
> diff --git a/server/parser/rteval-parserd.c b/server/parser/rteval-parserd.c
> deleted file mode 100644
> index 7aba85d..0000000
> --- a/server/parser/rteval-parserd.c
> +++ /dev/null
> @@ -1,533 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   rteval-parserd.c
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Thu Oct 15 11:59:27 2009
> - *
> - * @brief  Polls the rteval.submissionqueue table for notifications
> - *         from new inserts and sends the file to a processing thread
> - *
> - *
> - *
> - */
> -
> -#include <stdio.h>
> -#include <string.h>
> -#include <unistd.h>
> -#include <signal.h>
> -#include <pthread.h>
> -#include <sys/types.h>
> -#include <sys/stat.h>
> -#include <errno.h>
> -#include <assert.h>
> -
> -#include <eurephia_nullsafe.h>
> -#include <eurephia_values.h>
> -#include <configparser.h>
> -#include <pgsql.h>
> -#include <threadinfo.h>
> -#include <parsethread.h>
> -#include <argparser.h>
> -
> -#define DEFAULT_MSG_MAX 5             /**< Default size of the message queue */
> -#define XMLPARSER_XSL "xmlparser.xsl" /**< rteval report parser XSLT, parses XML into database friendly data*/
> -
> -static int shutdown = 0;              /**<  Variable indicating if the program should shutdown */
> -static LogContext *logctx = NULL;     /**<  Initialsed log context, to be used by sigcatch() */
> -
> -
> -/**
> - * Simple signal catcher.  Used for SIGINT and SIGTERM signals, and will set the global shutdown
> - * shutdown flag.  It's expected that all threads behaves properly and exits as soon as their current
> - * work is completed
> - *
> - * @param sig Recieved signal (not used)
> - */
> -void sigcatch(int sig) {
> -	switch( sig ) {
> -	case SIGINT:
> -	case SIGTERM:
> -		if( shutdown == 0 ) {
> -			shutdown = 1;
> -			writelog(logctx, LOG_INFO, "[SIGNAL] Shutting down");
> -		} else {
> -			writelog(logctx, LOG_INFO, "[SIGNAL] Shutdown in progress ... please be patient ...");
> -		}
> -		break;
> -
> -	case SIGUSR1:
> -		writelog(logctx, LOG_EMERG, "[SIGNAL] Shutdown alarm from a worker thread");
> -		shutdown = 1;
> -		break;
> -
> -	default:
> -		break;
> -	}
> -
> -	// re-enable signals, to avoid brute force exits.
> -	// If brute force is needed, SIGKILL is available.
> -	signal(sig, sigcatch);
> -}
> -
> -
> -/**
> - * Opens and reads /proc/sys/fs/mqueue/msg_max, to get the maximum number of allowed messages
> - * on POSIX MQ queues.  rteval-parserd will use as much of this as possible when needed.
> - *
> - * @return Returns the system msg_max value, or DEFAULT_MSG_MAX on failure to read the setting.
> - */
> -unsigned int get_mqueue_msg_max(LogContext *log) {
> -	FILE *fp = NULL;
> -	char buf[130];
> -	unsigned int msg_max = DEFAULT_MSG_MAX;
> -
> -	fp = fopen("/proc/sys/fs/mqueue/msg_max", "r");
> -	if( !fp ) {
> -		writelog(log, LOG_WARNING,
> -			"Could not open /proc/sys/fs/mqueue/msg_max, defaulting to %i",
> -			msg_max);
> -		writelog(log, LOG_INFO, "%s", strerror(errno));
> -		return msg_max;
> -	}
> -
> -	memset(&buf, 0, 130);
> -	if( fread(&buf, 1, 128, fp) < 1 ) {
> -		writelog(log, LOG_WARNING,
> -			"Could not read /proc/sys/fs/mqueue/msg_max, defaulting to %i",
> -			msg_max);
> -		writelog(log, LOG_INFO, "%s", strerror(errno));
> -	} else {
> -		msg_max = atoi_nullsafe(buf);
> -		if( msg_max < 1 ) {
> -			msg_max = DEFAULT_MSG_MAX;
> -			writelog(log, LOG_WARNING,
> -				"Failed to parse /proc/sys/fs/mqueue/msg_max,"
> -				"defaulting to %i", msg_max);
> -		}
> -	}
> -	fclose(fp);
> -	return msg_max;
> -}
> -
> -
> -/**
> - * Main loop, which polls the submissionqueue table and puts jobs found here into a POSIX MQ queue
> - * which the worker threads will pick up.
> - *
> - * @param dbc           Database connection, where to query the submission queue
> - * @param msgq          file descriptor for the message queue
> - * @param activethreads Pointer to an int value containing active worker threads.  Each thread updates
> - *                      this value directly, and this function should only read it.
> - *
> - * @return Returns 0 on successful run, otherwise > 0 on errors.
> - */
> -int process_submission_queue(dbconn *dbc, mqd_t msgq, int *activethreads) {
> -	pthread_mutex_t mtx_submq = PTHREAD_MUTEX_INITIALIZER;
> -	parseJob_t *job = NULL;
> -	int rc = 0, i, actthr_cp = 0;
> -
> -	while( shutdown == 0 ) {
> -		// Check status if the worker threads
> -		// If we don't have any worker threads, shut down immediately
> -		writelog(dbc->log, LOG_DEBUG, "Active worker threads: %i", *activethreads);
> -		if( *activethreads < 1 ) {
> -			writelog(dbc->log, LOG_EMERG,
> -				 "All worker threads ceased to exist.  Shutting down!");
> -			shutdown = 1;
> -			rc = 1;
> -			goto exit;
> -		}
> -
> -		if( db_ping(dbc) != 1 ) {
> -			writelog(dbc->log, LOG_EMERG, "Lost connection to database.  Shutting down!");
> -			shutdown = 1;
> -			rc = 1;
> -			goto exit;
> -		}
> -
> -		// Fetch an available job
> -		job = db_get_submissionqueue_job(dbc, &mtx_submq);
> -		if( !job ) {
> -			writelog(dbc->log, LOG_EMERG,
> -				 "Failed to get submission queue job.  Shutting down!");
> -			shutdown = 1;
> -			rc = 1;
> -			goto exit;
> -		}
> -		if( job->status == jbNONE ) {
> -			free_nullsafe(job);
> -			if( db_wait_notification(dbc, &shutdown, "rteval_submq") < 1 ) {
> -				writelog(dbc->log, LOG_EMERG,
> -					 "Failed to wait for DB notification.  Shutting down!");
> -				shutdown = 1;
> -				rc = 1;
> -				goto exit;
> -			}
> -			continue;
> -		}
> -
> -		// Send the job to the queue
> -		writelog(dbc->log, LOG_DEBUG, "** New job queued: submid %i, %s", job->submid, job->filename);
> -		do {
> -			int res;
> -
> -			errno = 0;
> -			res = mq_send(msgq, (char *) job, sizeof(parseJob_t), 1);
> -			if( (res < 0) && (errno != EAGAIN) ) {
> -				writelog(dbc->log, LOG_EMERG,
> -					 "Could not send parse job to the queue.  "
> -					 "Shutting down!");
> -				shutdown = 1;
> -				rc = 2;
> -				goto exit;
> -			} else if( errno == EAGAIN ) {
> -				writelog(dbc->log, LOG_WARNING,
> -					"Message queue filled up.  "
> -					"Will not add new messages to queue for the next 60 seconds");
> -				sleep(60);
> -			}
> -		} while( (errno == EAGAIN) );
> -		free_nullsafe(job);
> -	}
> -
> - exit:
> -	// Send empty messages to the threads, to make them have a look at the shutdown flag
> -	job = (parseJob_t *) malloc_nullsafe(dbc->log, sizeof(parseJob_t));
> -	errno = 0;
> -	// Need to make a copy, as *activethreads will change when threads completes shutdown
> -	actthr_cp = *activethreads;
> -	for( i = 0; i < actthr_cp; i++ ) {
> -		do {
> -			int res;
> -
> -			writelog(dbc->log, LOG_DEBUG, "%s shutdown message %i of %i",
> -				 (errno == EAGAIN ? "Resending" : "Sending"), i+1, *activethreads);
> -			errno = 0;
> -			res = mq_send(msgq, (char *) job, sizeof(parseJob_t), 1);
> -			if( (res < 0) && (errno != EAGAIN) ) {
> -				writelog(dbc->log, LOG_EMERG,
> -					 "Could not send shutdown notification to the queue.");
> -				free_nullsafe(job);
> -				return rc;
> -			} else if( errno == EAGAIN ) {
> -				writelog(dbc->log, LOG_WARNING,
> -					"Message queue filled up.  "
> -					"Will not add new messages to queue for the next 10 seconds");
> -				sleep(10);
> -			}
> -		} while( (errno == EAGAIN) );
> -	}
> -	free_nullsafe(job);
> -	return rc;
> -}
> -
> -
> -/**
> - * Prepares the program to be daemonised
> - *
> - * @param log   Initialised log context, where log info of the process is reported
> - *
> - * @return Returns 1 on success, otherwise -1
> - */
> -int daemonise(LogContext *log) {
> -	pid_t pid, sid;
> -	int i = 0;
> -
> -	if( (log->logtype == ltCONSOLE) ) {
> -		writelog(log, LOG_EMERG,
> -			 "Cannot daemonise when logging to a console (stdout: or stderr:)");
> -		return -1;
> -	}
> -
> -	pid = fork();
> -	if (pid < 0) {
> -		writelog(log, LOG_EMERG, "Failed to daemonise the process (fork)");
> -		return -1;
> -	} else if (pid > 0) {
> -		writelog(log, LOG_INFO, "Daemon pid: %ld", pid);
> -		exit(EXIT_SUCCESS);
> -	}
> -
> -	umask(0);
> -
> -	sid = setsid();
> -	if (sid < 0) {
> -		writelog(log, LOG_EMERG, "Failed to daemonise the process (setsid)");
> -		return -1;
> -	}
> -
> -	if ((chdir("/")) < 0) {
> -		writelog(log, LOG_EMERG, "Failed to daemonise the process (fork)");
> -		return -1;
> -	}
> -
> -	// Prepare stdin, stdout and stderr for daemon mode
> -	close(2);
> -	close(1);
> -	close(0);
> -	i = open("/dev/null", O_RDWR); /* open stdin */
> -	dup(i); /* stdout */
> -	dup(i); /* stderr */
> -
> -	writelog(log, LOG_INFO, "Daemonised successfully");
> -	return 1;
> -}
> -
> -
> -/**
> - * rtevald_parser main function.
> - *
> - * @param argc
> - * @param argv
> - *
> - * @return Returns the result of the process_submission_queue() function.
> - */
> -int main(int argc, char **argv) {
> -        eurephiaVALUES *config = NULL, *prgargs = NULL;
> -        char xsltfile[2050], *reportdir = NULL;
> -	xsltStylesheet *xslt = NULL;
> -	dbconn *dbc = NULL;
> -        pthread_t **threads = NULL;
> -        pthread_attr_t **thread_attrs = NULL;
> -	pthread_mutex_t mtx_sysreg = PTHREAD_MUTEX_INITIALIZER;
> -	pthread_mutex_t mtx_thrcnt = PTHREAD_MUTEX_INITIALIZER;
> -	threadData_t **thrdata = NULL;
> -	struct mq_attr msgq_attr;
> -	mqd_t msgq = 0;
> -	int i,rc, mq_init = 0, max_threads = 0, started_threads = 0, activethreads = 0;
> -	unsigned int max_report_size = 0;
> -
> -	// Initialise XML and XSLT libraries
> -	xsltInit();
> -	xmlInitParser();
> -
> -	prgargs = parse_arguments(argc, argv);
> -	if( prgargs == NULL ) {
> -		fprintf(stderr, "** ERROR **  Failed to parse program arguments\n");
> -		rc = 2;
> -		goto exit;
> -	}
> -
> -	// Setup a log context
> -	logctx = init_log(eGet_value(prgargs, "log"), eGet_value(prgargs, "loglevel"));
> -	if( !logctx ) {
> -		fprintf(stderr, "** ERROR **  Could not setup a log context\n");
> -		eFree_values(prgargs);
> -		rc = 2;
> -		goto exit;
> -	}
> -
> -	// Fetch configuration
> -        config = read_config(logctx, prgargs, "xmlrpc_parser");
> -	eFree_values(prgargs); // read_config() copies prgargs into config, we don't need prgargs anymore
> -
> -	// Daemonise process if requested
> -	if( atoi_nullsafe(eGet_value(config, "daemon")) == 1 ) {
> -		if( daemonise(logctx) < 1 ) {
> -			rc = 3;
> -			goto exit;
> -		}
> -	}
> -
> -
> -	// Parse XSLT template
> -	snprintf(xsltfile, 512, "%s/%s", eGet_value(config, "xsltpath"), XMLPARSER_XSL);
> -	writelog(logctx, LOG_DEBUG, "Parsing XSLT file: %s", xsltfile);
> -        xslt = xsltParseStylesheetFile((xmlChar *) xsltfile);
> -	if( !xslt ) {
> -		writelog(logctx, LOG_EMERG, "Could not parse XSLT template: %s", xsltfile);
> -		rc = 2;
> -		goto exit;
> -	}
> -
> -	// Open a POSIX MQ
> -	writelog(logctx, LOG_DEBUG, "Preparing POSIX MQ queue: /rteval_parsequeue");
> -	memset(&msgq, 0, sizeof(mqd_t));
> -	msgq_attr.mq_maxmsg = get_mqueue_msg_max(logctx);
> -	msgq_attr.mq_msgsize = sizeof(parseJob_t);
> -	msgq_attr.mq_flags = O_NONBLOCK;
> -	msgq = mq_open("/rteval_parsequeue", O_RDWR | O_CREAT, 0600, &msgq_attr);
> -	if( msgq < 0 ) {
> -		writelog(logctx, LOG_EMERG,
> -			 "Could not open message queue: %s", strerror(errno));
> -		rc = 2;
> -		goto exit;
> -	}
> -	mq_init = 1;
> -
> -	// Get the number of worker threads
> -	max_threads = atoi_nullsafe(eGet_value(config, "threads"));
> -	if( max_threads == 0 ) {
> -		max_threads = 4;
> -	}
> -
> -	// Get a database connection for the main thread
> -        dbc = db_connect(config, max_threads, logctx);
> -        if( !dbc ) {
> -		rc = 4;
> -		goto exit;
> -        }
> -
> -	// Prepare all threads
> -	threads = calloc(max_threads + 1, sizeof(pthread_t *));
> -	thread_attrs = calloc(max_threads + 1, sizeof(pthread_attr_t *));
> -	thrdata = calloc(max_threads + 1, sizeof(threadData_t *));
> -	assert( (threads != NULL) && (thread_attrs != NULL) && (thrdata != NULL) );
> -
> -	reportdir = eGet_value(config, "reportdir");
> -	writelog(logctx, LOG_INFO, "Starting %i worker threads", max_threads);
> -	max_report_size = defaultIntValue(atoi_nullsafe(eGet_value(config, "max_report_size")), 1024*1024);
> -	for( i = 0; i < max_threads; i++ ) {
> -		// Prepare thread specific data
> -		thrdata[i] = malloc_nullsafe(logctx, sizeof(threadData_t));
> -		if( !thrdata[i] ) {
> -			writelog(logctx, LOG_EMERG,
> -				 "Could not allocate memory for thread data");
> -			rc = 2;
> -			goto exit;
> -		}
> -
> -		// Get a database connection for the thread
> -		thrdata[i]->dbc = db_connect(config, i, logctx);
> -		if( !thrdata[i]->dbc ) {
> -			writelog(logctx, LOG_EMERG,
> -				"Could not connect to the database for thread %i", i);
> -			rc = 2;
> -			shutdown = 1;
> -			goto exit;
> -		}
> -
> -		// Parse the measurement_tables config variable, split it up into an array
> -		thrdata[i]->dbc->measurement_tbls = strSplit(eGet_value(config, "measurement_tables"), ", ");
> -		if( !thrdata[i]->dbc->measurement_tbls ) {
> -			writelog(dbc->log, LOG_CRIT, "Failed to parse measurement_tables configuration");
> -			rc = 2;
> -			shutdown = 1;
> -			goto exit;
> -		}
> -
> -		thrdata[i]->shutdown = &shutdown;
> -		thrdata[i]->threadcount = &activethreads;
> -		thrdata[i]->mtx_thrcnt = &mtx_thrcnt;
> -		thrdata[i]->id = i;
> -		thrdata[i]->msgq = msgq;
> -		thrdata[i]->mtx_sysreg = &mtx_sysreg;
> -		thrdata[i]->xslt = xslt;
> -		thrdata[i]->destdir = reportdir;
> -		thrdata[i]->max_report_size = max_report_size;
> -
> -		thread_attrs[i] = malloc_nullsafe(logctx, sizeof(pthread_attr_t));
> -		if( !thread_attrs[i] ) {
> -			writelog(logctx, LOG_EMERG,
> -				"Could not allocate memory for thread attributes");
> -			rc = 2;
> -			goto exit;
> -		}
> -		pthread_attr_init(thread_attrs[i]);
> -		pthread_attr_setdetachstate(thread_attrs[i], PTHREAD_CREATE_JOINABLE);
> -
> -		threads[i] = malloc_nullsafe(logctx, sizeof(pthread_t));
> -		if( !threads[i] ) {
> -			writelog(logctx, LOG_EMERG,
> -				"Could not allocate memory for pthread_t");
> -			rc = 2;
> -			goto exit;
> -		}
> -	}
> -
> -	// Setup signal catching
> -	signal(SIGINT,  sigcatch);
> -	signal(SIGTERM, sigcatch);
> -	signal(SIGHUP,  SIG_IGN);
> -	signal(SIGUSR1, sigcatch);
> -	signal(SIGUSR2, SIG_IGN);
> -
> -	// Start the threads
> -	for( i = 0; i < max_threads; i++ ) {
> -		int thr_rc = pthread_create(threads[i], thread_attrs[i], parsethread, thrdata[i]);
> -		if( thr_rc < 0 ) {
> -			writelog(logctx, LOG_EMERG,
> -				 "** ERROR **  Failed to start thread %i: %s",
> -				 i, strerror(thr_rc));
> -			rc = 3;
> -			goto exit;
> -		}
> -		started_threads++;
> -	}
> -
> -	// Main routine
> -	//
> -	// checks the submission queue and puts unprocessed records on the POSIX MQ
> -	// to be parsed by one of the threads
> -	//
> -	sleep(3); // Allow at least a few parser threads to settle down first before really starting
> -	writelog(logctx, LOG_DEBUG, "Starting submission queue checker");
> -	rc = process_submission_queue(dbc, msgq, &activethreads);
> -	writelog(logctx, LOG_DEBUG, "Submission queue checker shut down");
> -
> - exit:
> -	// Clean up all threads
> -	for( i = 0; i < max_threads; i++ ) {
> -		// Wait for all threads to exit
> -		if( (i < started_threads) && threads && threads[i] ) {
> -			void *thread_rc;
> -			int j_rc;
> -
> -			if( (j_rc = pthread_join(*threads[i], &thread_rc)) != 0 ) {
> -				writelog(logctx, LOG_CRIT,
> -					 "Failed to join thread %i: %s",
> -					 i, strerror(j_rc));
> -			}
> -			pthread_attr_destroy(thread_attrs[i]);
> -		}
> -		if( threads ) {
> -			free_nullsafe(threads[i]);
> -		}
> -		if( thread_attrs ) {
> -			free_nullsafe(thread_attrs[i]);
> -		}
> -
> -		// Disconnect threads database connection
> -		if( thrdata && thrdata[i] ) {
> -			strFree(thrdata[i]->dbc->measurement_tbls);
> -			db_disconnect(thrdata[i]->dbc);
> -			free_nullsafe(thrdata[i]);
> -		}
> -	}
> -	free_nullsafe(thrdata);
> -	free_nullsafe(threads);
> -	free_nullsafe(thread_attrs);
> -
> -	// Close message queue
> -	if( mq_init == 1 ) {
> -		errno = 0;
> -		if( mq_close(msgq) < 0 ) {
> -			writelog(logctx, LOG_CRIT, "Failed to close message queue: %s",
> -				 strerror(errno));
> -		}
> -		errno = 0;
> -		if( mq_unlink("/rteval_parsequeue") < 0 ) {
> -			writelog(logctx, LOG_ALERT, "Failed to remove the message queue: %s",
> -				 strerror(errno));
> -		}
> -	}
> -
> -	// Disconnect from database, main thread connection
> -	db_disconnect(dbc);
> -
> -	// Free up the rest
> -	eFree_values(config);
> -	xsltFreeStylesheet(xslt);
> -	xmlCleanupParser();
> -	xsltCleanupGlobals();
> -
> -	writelog(logctx, LOG_EMERG, "rteval-parserd is stopped");
> -	close_log(logctx);
> -	return rc;
> -}
> -
> diff --git a/server/parser/rteval-parserd.init b/server/parser/rteval-parserd.init
> deleted file mode 100755
> index a7da9db..0000000
> --- a/server/parser/rteval-parserd.init
> +++ /dev/null
> @@ -1,126 +0,0 @@
> -#!/bin/bash
> -#
> -# rteval-parserd  rteval report parser daemon
> -#
> -# Author:      David Sommerseth <davids@redhat.com>
> -#
> -# Copyright 2009 Red Hat, Inc. and/or its affiliates.
> -# Released under the GPL
> -#
> -# chkconfig: - 20 80
> -# description: The rteval-parserd waits for rteval summary reports and parses them on arrival
> -# config: /etc/sysconfig/rteval-parserd
> -#
> -### BEGIN INIT INFO
> -# Provides: rteval-parserd
> -# Required-Start: postgresql
> -# Required-Stop: -
> -# Default-Stop: 0 1 6
> -# Short-Description: start and stop rteval-parserd
> -# Description: The rteval-parserd waits for rteval summary reports and parses them on arrival
> -### END INIT INFO
> -
> -. /etc/rc.d/init.d/functions
> -
> -if [ -f /etc/sysconfig/rteval-parserd ]; then
> -    . /etc/sysconfig/rteval-parserd
> -fi
> -
> -prog=rteval-parserd
> -RETVAL=0
> -
> -if [ -z $PIDFILE ]; then
> -    PIDFILE=/var/run/$prog.pid
> -fi
> -
> -start() {
> -    # Check if we have a pid file, if we do check that it is correct
> -    if [ -f $PIDFILE ]; then
> -	filepid=$(cat $PIDFILE)
> -	chkpid=$(pidof $prog)
> -	if [ $? = 0 ]; then
> -	    if [ "$chkpid" != "$filepid" ] ; then
> -		# We have a pid file which is not correct, fix it
> -		echo $chkpid > $PIDFILE
> -		filepid=$chkpid
> -	    fi
> -	    echo "$prog is already started (pid $filepid)"
> -	    return 0
> -	else
> -	    # No process really exists, clean up!
> -	    rm -f $PIDFILE
> -	fi
> -    fi
> -
> -    # Start a new daemon
> -    args="--daemon"
> -    if [ -z "$NUM_THREADS" ]; then
> -	# If NUM_THREADS is not set, use number of cores found.
> -	NUM_THREADS=$(find /sys/devices/system/cpu/cpu? -maxdepth 0 -type d | wc -l)
> -    fi
> -    args="$args --threads $NUM_THREADS"
> -
> -    if [ ! -z "$LOG" ]; then
> -	args="$args --log $LOG"
> -    fi
> -
> -    if [ ! -z "$LOGLEVEL" ]; then
> -	args="$args --log-level $LOGLEVEL"
> -    fi
> -
> -    if [ ! -z "$CONFIGFILE" ]; then
> -	args="$args --config $CONFIGFILE"
> -    fi
> -    echo -n $"Starting $prog ($NUM_THREADS threads): "
> -    $prog $args
> -    pidof $prog > $PIDFILE
> -    RETVAL=$?
> -    [ $RETVAL = 0 ] && success $"$prog startup" || failure $"$prog startup"
> -    [ $RETVAL = 0 ] && touch /var/lock/subsys/$prog
> -    echo
> -    return $RETVAL
> -}
> -
> -stop() {
> -    echo -n $"Stopping $prog: "
> -    if [ ! -f $PIDFILE ]; then
> -	chkpid=$(pidof $prog)
> -	if [ $? = 0 ]; then
> -	    PID=$chkpid
> -	fi
> -    else
> -	PID=$(cat $PIDFILE)
> -    fi
> -    kill -TERM $PID
> -    RETVAL=$?
> -    [ $RETVAL = 0 ] && success $"$prog shutdown" || failure $"$prog (pid $PID) shutdown"
> -    [ $RETVAL = 0 ] && rm -f /var/lock/subsys/$prog $PIDFILE
> -    echo
> -}
> -
> -case "$1" in
> -  start)
> -	start
> -	;;
> -  stop)
> -	stop
> -	;;
> -  status)
> -        status $prog
> -	;;
> -  restart)
> -	stop
> -	start
> -	;;
> -  reload)
> -	stop
> -	start
> -	;;
> -  condrestart)
> -        ;;
> -  *)
> -	echo $"Usage: $prog {start|stop|restart|reload|status|help}"
> -	RETVAL=3
> -esac
> -
> -exit $RETVAL
> diff --git a/server/parser/rteval-parserd.sysconfig b/server/parser/rteval-parserd.sysconfig
> deleted file mode 100644
> index c57f48c..0000000
> --- a/server/parser/rteval-parserd.sysconfig
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -# Configuration parameters for rteval-parserd
> -
> -# *** Number of worker threads
> -# * When this is not set, the default will be one thread per CPU core
> -# NUM_THREADS=2
> -
> -# *** Logging
> -# * Valid values: syslog:[facility] or a file name (full path)
> -# * Valid facility values: daemon, user and local0 to local7
> -# * Default facility will be daemon
> -LOG=syslog:
> -
> -# *** Log level
> -# * Valid values: emerg, alert, crit, error, warn, notice, info, debug
> -LOGLEVEL=notice
> -
> -# *** rteval configuration file
> -# * Default value when not set is /etc/rteval.conf
> -# CONFIGFILE=/etc/rteval.conf
> -
> -# *** PID file
> -# * Full path to where to look for the PID file, defaults to /var/run/rteval-parserd.pid
> -# PIDFILE=/var/run/rteval-parserd.pid
> diff --git a/server/parser/sha1.c b/server/parser/sha1.c
> deleted file mode 100644
> index 3f77aa9..0000000
> --- a/server/parser/sha1.c
> +++ /dev/null
> @@ -1,615 +0,0 @@
> -/*-
> - * Copyright (c) 2001-2003 Allan Saddi <allan@saddi.com>
> - * All rights reserved.
> - *
> - * Redistribution and use in source and binary forms, with or without
> - * modification, are permitted provided that the following conditions
> - * are met:
> - * 1. Redistributions of source code must retain the above copyright
> - *    notice, this list of conditions and the following disclaimer.
> - * 2. Redistributions in binary form must reproduce the above copyright
> - *    notice, this list of conditions and the following disclaimer in the
> - *    documentation and/or other materials provided with the distribution.
> - *
> - * THIS SOFTWARE IS PROVIDED BY ALLAN SADDI AND HIS CONTRIBUTORS ``AS IS''
> - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> - * ARE DISCLAIMED.  IN NO EVENT SHALL ALLAN SADDI OR HIS CONTRIBUTORS BE
> - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
> - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
> - * POSSIBILITY OF SUCH DAMAGE.
> - *
> - * $Id: sha1.c 680 2003-07-25 21:57:38Z asaddi $
> - */
> -
> -/*
> - * Define WORDS_BIGENDIAN if compiling on a big-endian architecture.
> - *
> - * Define SHA1_TEST to test the implementation using the NIST's
> - * sample messages. The output should be:
> - *
> - *   a9993e36 4706816a ba3e2571 7850c26c 9cd0d89d
> - *   84983e44 1c3bd26e baae4aa1 f95129e5 e54670f1
> - *   34aa973c d4c4daa4 f61eeb2b dbad2731 6534016f
> - */
> -
> -#include <stdint.h>
> -#include <string.h>
> -
> -#include "sha1.h"
> -
> -#ifndef lint
> -static const char rcsid[] =
> -	"$Id: sha1.c 680 2003-07-25 21:57:38Z asaddi $";
> -#endif /* !lint */
> -
> -#define ROTL(x, n) (((x) << (n)) | ((x) >> (32 - (n))))
> -#define ROTR(x, n) (((x) >> (n)) | ((x) << (32 - (n))))
> -
> -#define F_0_19(x, y, z) ((z) ^ ((x) & ((y) ^ (z))))
> -#define F_20_39(x, y, z) ((x) ^ (y) ^ (z))
> -#define F_40_59(x, y, z) (((x) & ((y) | (z))) | ((y) & (z)))
> -#define F_60_79(x, y, z) ((x) ^ (y) ^ (z))
> -
> -#define DO_ROUND(F, K) { \
> -  temp = ROTL(a, 5) + F(b, c, d) + e + *(W++) + K; \
> -  e = d; \
> -  d = c; \
> -  c = ROTL(b, 30); \
> -  b = a; \
> -  a = temp; \
> -}
> -
> -#define K_0_19 0x5a827999L
> -#define K_20_39 0x6ed9eba1L
> -#define K_40_59 0x8f1bbcdcL
> -#define K_60_79 0xca62c1d6L
> -
> -#ifndef RUNTIME_ENDIAN
> -
> -#ifdef WORDS_BIGENDIAN
> -
> -#define BYTESWAP(x) (x)
> -#define BYTESWAP64(x) (x)
> -
> -#else /* WORDS_BIGENDIAN */
> -
> -#define BYTESWAP(x) ((ROTR((x), 8) & 0xff00ff00L) | \
> -		     (ROTL((x), 8) & 0x00ff00ffL))
> -#define BYTESWAP64(x) _byteswap64(x)
> -
> -static inline uint64_t _byteswap64(uint64_t x)
> -{
> -  uint32_t a = x >> 32;
> -  uint32_t b = (uint32_t) x;
> -  return ((uint64_t) BYTESWAP(b) << 32) | (uint64_t) BYTESWAP(a);
> -}
> -
> -#endif /* WORDS_BIGENDIAN */
> -
> -#else /* !RUNTIME_ENDIAN */
> -
> -#define BYTESWAP(x) _byteswap(sc->littleEndian, x)
> -#define BYTESWAP64(x) _byteswap64(sc->littleEndian, x)
> -
> -#define _BYTESWAP(x) ((ROTR((x), 8) & 0xff00ff00L) | \
> -		      (ROTL((x), 8) & 0x00ff00ffL))
> -#define _BYTESWAP64(x) __byteswap64(x)
> -
> -static inline uint64_t __byteswap64(uint64_t x)
> -{
> -  uint32_t a = x >> 32;
> -  uint32_t b = (uint32_t) x;
> -  return ((uint64_t) _BYTESWAP(b) << 32) | (uint64_t) _BYTESWAP(a);
> -}
> -
> -static inline uint32_t _byteswap(int littleEndian, uint32_t x)
> -{
> -  if (!littleEndian)
> -    return x;
> -  else
> -    return _BYTESWAP(x);
> -}
> -
> -static inline uint64_t _byteswap64(int littleEndian, uint64_t x)
> -{
> -  if (!littleEndian)
> -    return x;
> -  else
> -    return _BYTESWAP64(x);
> -}
> -
> -static inline void setEndian(int *littleEndianp)
> -{
> -  union {
> -    uint32_t w;
> -    uint8_t b[4];
> -  } endian;
> -
> -  endian.w = 1L;
> -  *littleEndianp = endian.b[0] != 0;
> -}
> -
> -#endif /* !RUNTIME_ENDIAN */
> -
> -static const uint8_t padding[64] = {
> -  0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> -  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> -  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> -  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> -  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> -  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> -  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> -  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> -};
> -
> -void
> -SHA1Init (SHA1Context *sc)
> -{
> -#ifdef RUNTIME_ENDIAN
> -  setEndian (&sc->littleEndian);
> -#endif /* RUNTIME_ENDIAN */
> -
> -  sc->totalLength = 0LL;
> -  sc->hash[0] = 0x67452301L;
> -  sc->hash[1] = 0xefcdab89L;
> -  sc->hash[2] = 0x98badcfeL;
> -  sc->hash[3] = 0x10325476L;
> -  sc->hash[4] = 0xc3d2e1f0L;
> -  sc->bufferLength = 0L;
> -}
> -
> -static void
> -burnStack (int size)
> -{
> -  char buf[128];
> -
> -  memset (buf, 0, sizeof (buf));
> -  size -= sizeof (buf);
> -  if (size > 0)
> -    burnStack (size);
> -}
> -
> -static void
> -SHA1Guts (SHA1Context *sc, const uint32_t *cbuf)
> -{
> -  uint32_t buf[80];
> -  uint32_t *W, *W3, *W8, *W14, *W16;
> -  uint32_t a, b, c, d, e, temp;
> -  int i;
> -
> -  W = buf;
> -
> -  for (i = 15; i >= 0; i--) {
> -    *(W++) = BYTESWAP(*cbuf);
> -    cbuf++;
> -  }
> -
> -  W16 = &buf[0];
> -  W14 = &buf[2];
> -  W8 = &buf[8];
> -  W3 = &buf[13];
> -
> -  for (i = 63; i >= 0; i--) {
> -    *W = *(W3++) ^ *(W8++) ^ *(W14++) ^ *(W16++);
> -    *W = ROTL(*W, 1);
> -    W++;
> -  }
> -
> -  a = sc->hash[0];
> -  b = sc->hash[1];
> -  c = sc->hash[2];
> -  d = sc->hash[3];
> -  e = sc->hash[4];
> -
> -  W = buf;
> -
> -#ifndef SHA1_UNROLL
> -#define SHA1_UNROLL 20
> -#endif /* !SHA1_UNROLL */
> -
> -#if SHA1_UNROLL == 1
> -  for (i = 19; i >= 0; i--)
> -    DO_ROUND(F_0_19, K_0_19);
> -
> -  for (i = 19; i >= 0; i--)
> -    DO_ROUND(F_20_39, K_20_39);
> -
> -  for (i = 19; i >= 0; i--)
> -    DO_ROUND(F_40_59, K_40_59);
> -
> -  for (i = 19; i >= 0; i--)
> -    DO_ROUND(F_60_79, K_60_79);
> -#elif SHA1_UNROLL == 2
> -  for (i = 9; i >= 0; i--) {
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -  }
> -
> -  for (i = 9; i >= 0; i--) {
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -  }
> -
> -  for (i = 9; i >= 0; i--) {
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -  }
> -
> -  for (i = 9; i >= 0; i--) {
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -  }
> -#elif SHA1_UNROLL == 4
> -  for (i = 4; i >= 0; i--) {
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -  }
> -
> -  for (i = 4; i >= 0; i--) {
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -  }
> -
> -  for (i = 4; i >= 0; i--) {
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -  }
> -
> -  for (i = 4; i >= 0; i--) {
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -  }
> -#elif SHA1_UNROLL == 5
> -  for (i = 3; i >= 0; i--) {
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -  }
> -
> -  for (i = 3; i >= 0; i--) {
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -  }
> -
> -  for (i = 3; i >= 0; i--) {
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -  }
> -
> -  for (i = 3; i >= 0; i--) {
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -  }
> -#elif SHA1_UNROLL == 10
> -  for (i = 1; i >= 0; i--) {
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -    DO_ROUND(F_0_19, K_0_19);
> -  }
> -
> -  for (i = 1; i >= 0; i--) {
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -    DO_ROUND(F_20_39, K_20_39);
> -  }
> -
> -  for (i = 1; i >= 0; i--) {
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -    DO_ROUND(F_40_59, K_40_59);
> -  }
> -
> -  for (i = 1; i >= 0; i--) {
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -    DO_ROUND(F_60_79, K_60_79);
> -  }
> -#elif SHA1_UNROLL == 20
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -  DO_ROUND(F_0_19, K_0_19);
> -
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -  DO_ROUND(F_20_39, K_20_39);
> -
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -  DO_ROUND(F_40_59, K_40_59);
> -
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -  DO_ROUND(F_60_79, K_60_79);
> -#else /* SHA1_UNROLL */
> -#error SHA1_UNROLL must be 1, 2, 4, 5, 10 or 20!
> -#endif
> -
> -  sc->hash[0] += a;
> -  sc->hash[1] += b;
> -  sc->hash[2] += c;
> -  sc->hash[3] += d;
> -  sc->hash[4] += e;
> -}
> -
> -void
> -SHA1Update (SHA1Context *sc, const void *vdata, uint32_t len)
> -{
> -  const uint8_t *data = vdata;
> -  uint32_t bufferBytesLeft;
> -  uint32_t bytesToCopy;
> -  int needBurn = 0;
> -
> -#ifdef SHA1_FAST_COPY
> -  if (sc->bufferLength) {
> -    bufferBytesLeft = 64L - sc->bufferLength;
> -
> -    bytesToCopy = bufferBytesLeft;
> -    if (bytesToCopy > len)
> -      bytesToCopy = len;
> -
> -    memcpy (&sc->buffer.bytes[sc->bufferLength], data, bytesToCopy);
> -
> -    sc->totalLength += bytesToCopy * 8L;
> -
> -    sc->bufferLength += bytesToCopy;
> -    data += bytesToCopy;
> -    len -= bytesToCopy;
> -
> -    if (sc->bufferLength == 64L) {
> -      SHA1Guts (sc, sc->buffer.words);
> -      needBurn = 1;
> -      sc->bufferLength = 0L;
> -    }
> -  }
> -
> -  while (len > 63) {
> -    sc->totalLength += 512L;
> -
> -    SHA1Guts (sc, data);
> -    needBurn = 1;
> -
> -    data += 64L;
> -    len -= 64L;
> -  }
> -
> -  if (len) {
> -    memcpy (&sc->buffer.bytes[sc->bufferLength], data, len);
> -
> -    sc->totalLength += len * 8L;
> -
> -    sc->bufferLength += len;
> -  }
> -#else /* SHA1_FAST_COPY */
> -  while (len) {
> -    bufferBytesLeft = 64L - sc->bufferLength;
> -
> -    bytesToCopy = bufferBytesLeft;
> -    if (bytesToCopy > len)
> -      bytesToCopy = len;
> -
> -    memcpy (&sc->buffer.bytes[sc->bufferLength], data, bytesToCopy);
> -
> -    sc->totalLength += bytesToCopy * 8L;
> -
> -    sc->bufferLength += bytesToCopy;
> -    data += bytesToCopy;
> -    len -= bytesToCopy;
> -
> -    if (sc->bufferLength == 64L) {
> -      SHA1Guts (sc, sc->buffer.words);
> -      needBurn = 1;
> -      sc->bufferLength = 0L;
> -    }
> -  }
> -#endif /* SHA1_FAST_COPY */
> -
> -  if (needBurn)
> -    burnStack (sizeof (uint32_t[86]) + sizeof (uint32_t *[5]) + sizeof (int));
> -}
> -
> -void
> -SHA1Final (SHA1Context *sc, uint8_t hash[SHA1_HASH_SIZE])
> -{
> -  uint32_t bytesToPad;
> -  uint64_t lengthPad;
> -  int i;
> -
> -  bytesToPad = 120L - sc->bufferLength;
> -  if (bytesToPad > 64L)
> -    bytesToPad -= 64L;
> -
> -  lengthPad = BYTESWAP64(sc->totalLength);
> -
> -  SHA1Update (sc, padding, bytesToPad);
> -  SHA1Update (sc, &lengthPad, 8L);
> -
> -  if (hash) {
> -    for (i = 0; i < SHA1_HASH_WORDS; i++) {
> -#ifdef SHA1_FAST_COPY
> -      *((uint32_t *) hash) = BYTESWAP(sc->hash[i]);
> -#else /* SHA1_FAST_COPY */
> -      hash[0] = (uint8_t) (sc->hash[i] >> 24);
> -      hash[1] = (uint8_t) (sc->hash[i] >> 16);
> -      hash[2] = (uint8_t) (sc->hash[i] >> 8);
> -      hash[3] = (uint8_t) sc->hash[i];
> -#endif /* SHA1_FAST_COPY */
> -      hash += 4;
> -    }
> -  }
> -}
> -
> -#ifdef SHA1_TEST
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <string.h>
> -
> -int
> -main (int argc, char *argv[])
> -{
> -  SHA1Context foo;
> -  uint8_t hash[SHA1_HASH_SIZE];
> -  char buf[1000];
> -  int i;
> -
> -  SHA1Init (&foo);
> -  SHA1Update (&foo, "abc", 3);
> -  SHA1Final (&foo, hash);
> -
> -  for (i = 0; i < SHA1_HASH_SIZE;) {
> -    printf ("%02x", hash[i++]);
> -    if (!(i % 4))
> -      printf (" ");
> -  }
> -  printf ("\n");
> -
> -  SHA1Init (&foo);
> -  SHA1Update (&foo,
> -		"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
> -		56);
> -  SHA1Final (&foo, hash);
> -
> -  for (i = 0; i < SHA1_HASH_SIZE;) {
> -    printf ("%02x", hash[i++]);
> -    if (!(i % 4))
> -      printf (" ");
> -  }
> -  printf ("\n");
> -
> -  SHA1Init (&foo);
> -  memset (buf, 'a', sizeof (buf));
> -  for (i = 0; i < 1000; i++)
> -    SHA1Update (&foo, buf, sizeof (buf));
> -  SHA1Final (&foo, hash);
> -
> -  for (i = 0; i < SHA1_HASH_SIZE;) {
> -    printf ("%02x", hash[i++]);
> -    if (!(i % 4))
> -      printf (" ");
> -  }
> -  printf ("\n");
> -
> -  exit (0);
> -}
> -
> -#endif /* SHA1_TEST */
> diff --git a/server/parser/sha1.h b/server/parser/sha1.h
> deleted file mode 100644
> index 9ce5bd6..0000000
> --- a/server/parser/sha1.h
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -/*-
> - * Copyright (c) 2001-2003 Allan Saddi <allan@saddi.com>
> - * All rights reserved.
> - *
> - * Redistribution and use in source and binary forms, with or without
> - * modification, are permitted provided that the following conditions
> - * are met:
> - * 1. Redistributions of source code must retain the above copyright
> - *    notice, this list of conditions and the following disclaimer.
> - * 2. Redistributions in binary form must reproduce the above copyright
> - *    notice, this list of conditions and the following disclaimer in the
> - *    documentation and/or other materials provided with the distribution.
> - *
> - * THIS SOFTWARE IS PROVIDED BY ALLAN SADDI AND HIS CONTRIBUTORS ``AS IS''
> - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> - * ARE DISCLAIMED.  IN NO EVENT SHALL ALLAN SADDI OR HIS CONTRIBUTORS BE
> - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
> - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
> - * POSSIBILITY OF SUCH DAMAGE.
> - *
> - * $Id: sha1.h 347 2003-02-23 22:11:49Z asaddi $
> - */
> -
> -#ifndef _SHA1_H
> -#define _SHA1_H
> -
> -#include <stdint.h>
> -
> -#define SHA1_HASH_SIZE 20
> -
> -/* Hash size in 32-bit words */
> -#define SHA1_HASH_WORDS 5
> -
> -struct _SHA1Context {
> -  uint64_t totalLength;
> -  uint32_t hash[SHA1_HASH_WORDS];
> -  uint32_t bufferLength;
> -  union {
> -    uint32_t words[16];
> -    uint8_t bytes[64];
> -  } buffer;
> -#ifdef RUNTIME_ENDIAN
> -  int littleEndian;
> -#endif /* RUNTIME_ENDIAN */
> -};
> -
> -typedef struct _SHA1Context SHA1Context;
> -
> -#ifdef __cplusplus
> -extern "C" {
> -#endif
> -
> -void SHA1Init (SHA1Context *sc);
> -void SHA1Update (SHA1Context *sc, const void *data, uint32_t len);
> -void SHA1Final (SHA1Context *sc, uint8_t hash[SHA1_HASH_SIZE]);
> -
> -#ifdef __cplusplus
> -}
> -#endif
> -
> -#endif /* _SHA1_H */
> diff --git a/server/parser/statuses.h b/server/parser/statuses.h
> deleted file mode 100644
> index a1beef6..0000000
> --- a/server/parser/statuses.h
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   statuses.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Wed Oct 21 11:17:24 2009
> - *
> - * @brief  Status values used by rteval-parserd
> - *
> - */
> -
> -#ifndef _RTEVAL_STATUS_H
> -#define _RTEVAL_STATUS_H
> -
> -#define STAT_NEW       0         /**< New, unparsed report in the submission queue */
> -#define STAT_ASSIGNED  1         /**< Submission is assigned to a parser */
> -#define STAT_INPROG    2         /**< Parsing has started */
> -#define STAT_SUCCESS   3         /**< Report parsed successfully */
> -#define STAT_UNKNFAIL  4         /**< Unkown failure */
> -#define STAT_XMLFAIL   5         /**< Failed to parse the report XML file */
> -#define STAT_SYSREG    6         /**< System registration failed */
> -#define STAT_RTERIDREG 7         /**< Failed to get a new rterid value for the rteval run */
> -#define STAT_GENDB     8         /**< General database error */
> -#define STAT_RTEVRUNS  9         /**< Registering rteval run information failed */
> -#define STAT_MEASURE   10        /**< Registering measurement results failed */
> -#define STAT_REPMOVE   11        /**< Failed to move the report file */
> -#define STAT_FTOOBIG   12        /**< Report is too big (see config parameter: max_report_size) */
> -
> -#endif
> diff --git a/server/parser/threadinfo.h b/server/parser/threadinfo.h
> deleted file mode 100644
> index 53c4e7d..0000000
> --- a/server/parser/threadinfo.h
> +++ /dev/null
> @@ -1,38 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - */
> -
> -/**
> - * @file   threadinfo.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Thu Oct 15 11:47:51 2009
> - *
> - * @brief  Shared info between the main() and parsethread() functions
> - *
> - */
> -
> -#ifndef _THREADINFO_H
> -#define _THREADINFO_H
> -
> -#include <mqueue.h>
> -#include <libxslt/transform.h>
> -
> -/**
> - *  Thread slot information.  Each thread slot is assigned with one threadData_t element.
> - */
> -typedef struct {
> -        int *shutdown;                /**< If set to 1, the thread should shut down */
> -        int *threadcount;             /**< Number of active worker threads */
> -        pthread_mutex_t *mtx_thrcnt;  /**< Mutex lock for updating active worker threads */
> -        mqd_t msgq;                   /**< POSIX MQ descriptor */
> -        pthread_mutex_t *mtx_sysreg;  /**< Mutex locking, to avoid clashes with registering systems */
> -        unsigned int id;              /**< Numeric ID for this thread */
> -        dbconn *dbc;                  /**< Database connection assigned to this thread */
> -        xsltStylesheet *xslt;         /**< XSLT stylesheet assigned to this thread */
> -        const char *destdir;          /**< Directory where to put the parsed reports */
> -        unsigned int max_report_size; /**< Maximum accepted file size of reports (config: max_report_size) */
> -} threadData_t;
> -
> -#endif
> diff --git a/server/parser/xmlparser.c b/server/parser/xmlparser.c
> deleted file mode 100644
> index 1ea7377..0000000
> --- a/server/parser/xmlparser.c
> +++ /dev/null
> @@ -1,620 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - * David Sommerseth <davids@redhat.com>
> - *
> - * Parses summary.xml reports from rteval into a standardised XML format
> - * which is useful when putting data into a database.
> - *
> - */
> -
> -/**
> - * @file   xmlparser.c
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Wed Oct 21 10:58:53 2009
> - *
> - * @brief Parses summary.xml reports from rteval into a standardised XML format
> - *        which is useful when putting data into a database.
> - *
> - */
> -
> -#include <stdio.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <assert.h>
> -
> -#include <libxml/tree.h>
> -#include <libxslt/xsltInternals.h>
> -#include <libxslt/transform.h>
> -#include <libxslt/xsltutils.h>
> -#include <libexslt/exslt.h>
> -
> -#include <eurephia_nullsafe.h>
> -#include <eurephia_xml.h>
> -#include <xmlparser.h>
> -#include <sha1.h>
> -#include <log.h>
> -
> -static dbhelper_func const * xmlparser_dbhelpers = NULL;
> -
> -/**
> - * Simple strdup() function which encapsulates the string in single quotes,
> - * which is needed for XSLT parameter values
> - *
> - * @param str The string to be strdup'ed and encapsulated
> - *
> - * @return Returns a pointer to the new buffer.
> - */
> -static char *encapsString(const char *str) {
> -        char *ret = NULL;
> -
> -        if( str == NULL ) {
> -                return NULL;
> -        }
> -
> -        ret = (char *) calloc(1, strlen(str)+4);
> -        assert( ret != NULL );
> -
> -        snprintf(ret, strlen(str)+3, "'%s'", str);
> -        return ret;
> -}
> -
> -
> -/**
> - * Converts an integer to string an encapsulates the value in single quotes,
> - * which is needed for XSLT parameter values.
> - *
> - * @param val Integer value to encapsulate
> - *
> - * @return Returns a pointer to a new buffer with the encapsulated integer value.  This
> - *         buffer must be free'd after usage.
> - */
> -static char *encapsInt(const unsigned int val) {
> -        char *buf = NULL;
> -
> -        buf = (char *) calloc(1, 130);
> -        snprintf(buf, 128, "'%i'", val);
> -        return buf;
> -}
> -
> -
> -/**
> - * Simple function to determine if the given string is a number or not
> - *
> - * @param str Pointer to the tring to be checked
> - *
> - * @returns Returns 0 if not a number and a non-null value if it is a number
> - */
> -int isNumber(const char * str)
> -{
> -    char *ptr = NULL;
> -
> -    if (str == NULL || *str == '\0' || isspace(*str))
> -      return 0;
> -
> -    strtod (str, &ptr);
> -    return *ptr == '\0';
> -}
> -
> -
> -/**
> - * Split a string into an array.
> - * Use strGet() to extract the results and strFree() to free the memory
> - * allocated by strSplit()
> - *
> - * @param str Input string
> - * @param sep Separator list (string)
> - *
> - * @returns Returns a pointer to a array_str_t struct on success, otherwise NULL
> - */
> -array_str_t * strSplit(const char * str, const char * sep)
> -{
> -        array_str_t * ret = calloc(1, sizeof(array_str_t));
> -        char * p = NULL, *cp = strdup(str);
> -
> -        if( !ret || !cp ) {
> -                fprintf(stderr, "Memory allocation error in strSplit()\n");
> -                return NULL;
> -        }
> -
> -        p = strtok(cp, sep);
> -        while( p ) {
> -                ret->data = realloc(ret->data, sizeof(char *) * ++(ret->size));
> -                if( !ret->data ) {
> -                        fprintf(stderr, "Memory allocation error in strSplit() while parsing\n");
> -                        free(ret);
> -                        return NULL;
> -                }
> -                ret->data[ret->size-1] = strdup(p);
> -                p = strtok(NULL, sep);
> -        }
> -        free(cp);
> -        return ret;
> -}
> -
> -/**
> - * Retrieve an array memeber
> - *
> - * @param ar Pointer holding the array_str_t data
> - * @param el Element number to retrive
> - *
> - * @returns Returns a pointer to the array member.  This value must never be freed.
> - * On failure NULL is returned.  Only possible failures are out-of-range or a NULL
> - * array input.
> - */
> -inline char * strGet(array_str_t * ar, unsigned int el)
> -{
> -        return (!ar && (el > ar->size) ? NULL : ar->data[el]);
> -}
> -
> -/**
> - * Retrive number of accessible array members
> - *
> - * @param ar Pointer holding the array_str_t data
> - *
> - * @returns Returns the number of elements in the array_str_t struct.
> - *          If a NULL pointer is given, it will return 0.
> - */
> -inline unsigned int strSize(array_str_t * ar)
> -{
> -        return (!ar ? 0 : ar->size);
> -}
> -
> -/**
> - * Frees up the memory held by an array_str_t struct.
> - *
> - * @params ar Pointer holding the array_str_t data to be freed
> - *
> - */
> -void strFree(array_str_t * ar)
> -{
> -        int i = 0;
> -
> -        if( !ar ) {
> -                return;
> -        }
> -
> -        for( i = 0; i < ar->size; i++ ) {
> -                free(ar->data[i]);
> -                ar->data[i] = NULL;
> -        }
> -        free(ar->data); ar->data = NULL;
> -        free(ar);
> -}
> -
> -/**
> - * Initialise the XML parser, setting some global variables
> - */
> -void init_xmlparser(dbhelper_func const * dbhelpers)
> -{
> -	xmlparser_dbhelpers = dbhelpers;
> -
> -        /* Init libxml2 and load all exslt functions */
> -        xmlInitMemory();
> -        exsltRegisterAll();
> -}
> -
> -
> -/**
> - * Parses any XML input document into a sqldata XML format which can be used by pgsql_INSERT().
> - * The transformation must be defined in the input XSLT template.
> - *
> - * @param log       Log context
> - * @param xslt      XSLT template defining the data transformation
> - * @param indata_d  Input XML data to transform to a sqldata XML document
> - * @param params    Parameters to be sent to the XSLT parser
> - *
> - * @return Returns a well formed sqldata XML document on success, otherwise NULL is returned.
> - */
> -xmlDoc *parseToSQLdata(LogContext *log, xsltStylesheet *xslt, xmlDoc *indata_d, parseParams *params) {
> -        xmlDoc *result_d = NULL;
> -        char **xsltparams = NULL;
> -        unsigned int idx = 0, idx_table = 0, idx_submid = 0,
> -		idx_syskey = 0, idx_rterid = 0, idx_repfname = 0;
> -
> -        xsltparams = calloc(10, sizeof(char *));
> -
> -        if( xmlparser_dbhelpers == NULL ) {
> -                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
> -                return NULL;
> -        }
> -
> -        if( params->table == NULL ) {
> -                writelog(log, LOG_ERR, "Table is not defined");
> -                return NULL;
> -        }
> -
> -        // Prepare XSLT parameters
> -        xsltparams[idx++] = "table\0";
> -        xsltparams[idx] = (char *) encapsString(params->table);
> -        idx_table = idx++;
> -
> -        if( params->submid > 0) {
> -                xsltparams[idx++] = "submid\0";
> -                xsltparams[idx] = (char *) encapsInt(params->submid);
> -                idx_submid = idx++;
> -        }
> -
> -        if( params->syskey > 0) {
> -                xsltparams[idx++] = "syskey\0";
> -                xsltparams[idx] = (char *) encapsInt(params->syskey);
> -                idx_syskey = idx++;
> -        }
> -
> -        if( params->rterid > 0 ) {
> -                xsltparams[idx++] = "rterid";
> -                xsltparams[idx] = (char *) encapsInt(params->rterid);
> -                idx_rterid = idx++;
> -        }
> -
> -        if( params->report_filename ) {
> -                xsltparams[idx++] = "report_filename";
> -                xsltparams[idx] = (char *) encapsString(params->report_filename);
> -                idx_repfname = idx++;
> -        }
> -        xsltparams[idx] = NULL;
> -
> -        // Apply the XSLT template to the input XML data
> -        result_d = xsltApplyStylesheet(xslt, indata_d, (const char **)xsltparams);
> -        if( result_d == NULL ) {
> -                writelog(log, LOG_CRIT, "Failed applying XSLT template to input XML");
> -        }
> -
> -        // Free memory we allocated via encapsString()/encapsInt()
> -        free(xsltparams[idx_table]);
> -        if( params->submid ) {
> -                free(xsltparams[idx_submid]);
> -        }
> -        if( params->syskey ) {
> -                free(xsltparams[idx_syskey]);
> -        }
> -        if( params->rterid ) {
> -                free(xsltparams[idx_rterid]);
> -        }
> -        if( params->report_filename ) {
> -                free(xsltparams[idx_repfname]);
> -        }
> -
> -        free(xsltparams);
> -        return result_d;
> -}
> -
> -
> -/**
> - * Internal xmlparser function.   Extracts the value from a '//sqldata/records/record/value'
> - * node and hashes the value if the 'hash' attribute is set.  Otherwise the value is extracted
> - * from the node directly.  This function is only used by sqldataExtractContent().
> - *
> - * @param sql_n sqldata values node containing the value to extract.
> - *
> - * @return Returns a pointer to a new buffer containing the value on success, otherwise NULL.
> - *         This memory buffer must be free'd after usage.
> - */
> -char * sqldataValueHash(LogContext *log, xmlNode *sql_n) {
> -	const char *hash = NULL, *isnull = NULL;
> -	SHA1Context shactx;
> -	uint8_t shahash[SHA1_HASH_SIZE];
> -	char *ret = NULL, *ptr = NULL;
> -	int i;
> -
> -	if( !(sql_n && (xmlStrcmp(sql_n->name, (xmlChar *) "value") == 0)
> -              && (xmlStrcmp(sql_n->parent->name, (xmlChar *) "record") == 0)
> -              || (xmlStrcmp(sql_n->parent->name, (xmlChar *) "value") == 0)) ) {
> -                return NULL;
> -	}
> -
> -	isnull = xmlGetAttrValue(sql_n->properties, "isnull");
> -	if( isnull && (strcmp(isnull, "1") == 0) ) {
> -		return NULL;
> -	}
> -
> -	hash = xmlGetAttrValue(sql_n->properties, "hash");
> -	if( !hash ) {
> -		// If no hash attribute is found, just use the raw data
> -		ret = strdup_nullsafe(xmlExtractContent(sql_n));
> -	} else if( strcasecmp(hash, "sha1") == 0 ) {
> -		const char *indata = xmlExtractContent(sql_n);
> -		// SHA1 hashing requested
> -		SHA1Init(&shactx);
> -		SHA1Update(&shactx, indata, strlen_nullsafe(indata));
> -		SHA1Final(&shactx, shahash);
> -
> -		// "Convert" to a readable format
> -		ret = malloc_nullsafe(log, (SHA1_HASH_SIZE * 2) + 3);
> -		ptr = ret;
> -		for( i = 0; i < SHA1_HASH_SIZE; i++ ) {
> -			sprintf(ptr, "%02x", shahash[i]);
> -			ptr += 2;
> -		}
> -	} else {
> -		ret = strdup("<Unsupported hashing algorithm>");
> -	}
> -
> -	return ret;
> -}
> -
> -
> -/**
> - * Extract the content of a //sqldata/records/record/value[@type='array']/value node set
> - * and format it in suitable array format for the database backend.
> - *
> - * @param log    Log context
> - * @param sql_n sqldata values node containing the value to extract and format as an array.
> - *
> - * @return Returns a pointer to a new memory buffer containing the value as a string.
> - *         On errors, NULL is returned.  This memory buffer must be free'd after usage.
> - */
> -static char * sqldataValueArray(LogContext *log, xmlNode *sql_n)
> -{
> -	if( xmlparser_dbhelpers == NULL ) {
> -		writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
> -		return NULL;
> -	}
> -
> -	return xmlparser_dbhelpers->dbh_FormatArray(log, sql_n);
> -}
> -
> -
> -/**
> - * Extract the content of a '//sqldata/records/record/value' node.  It will consider
> - * both the 'hash' and 'type' attributes of the 'value' tag.
> - *
> - * @param log    Log context
> - * @param sql_n  Pointer to a value node of a sqldata XML document.
> - *
> - * @return Returns a pointer to a new memory buffer containing the value as a string.
> - *         On errors, NULL is returned.  This memory buffer must be free'd after usage.
> - */
> -char *sqldataExtractContent(LogContext *log, xmlNode *sql_n) {
> -	const char *valtype = xmlGetAttrValue(sql_n->properties, "type");
> -
> -        if( xmlparser_dbhelpers == NULL ) {
> -                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
> -                return NULL;
> -        }
> -
> -	if( !sql_n || (xmlStrcmp(sql_n->name, (xmlChar *) "value") != 0)
> -	    || (xmlStrcmp(sql_n->parent->name, (xmlChar *) "record") != 0) ) {
> -		    return NULL;
> -	}
> -
> -	if( valtype && (strcmp(valtype, "xmlblob") == 0) ) {
> -		xmlNode *chld_n = sql_n->children;
> -
> -		// Go to next "real" tag, skipping non-element nodes
> -		while( chld_n && chld_n->type != XML_ELEMENT_NODE ){
> -			chld_n = chld_n->next;
> -		}
> -		return xmlNodeToString(log, chld_n);
> -        } else if( valtype && (strcmp(valtype, "array") == 0) ) {
> -                return sqldataValueArray(log, sql_n);
> -	} else {
> -		return sqldataValueHash(log, sql_n);
> -	}
> -}
> -
> -
> -/**
> - * Return the 'fid' value of a given field in an sqldata XML document.
> - *
> - * @param log    Log context
> - * @param sql_n  Pointer to the root xmlNode element of a sqldata XML document
> - * @param fname  String containing the field name to look up
> - *
> - * @return Returns a value >= 0 on success, containing the 'fid' value of the field.  Otherwise
> - *         a value < 0 is returned.  -1 if the field is not found or -2 if there are some problems
> - *         with the XML document.
> - */
> -int sqldataGetFid(LogContext *log, xmlNode *sql_n, const char *fname) {
> -	xmlNode *f_n = NULL;
> -
> -        if( xmlparser_dbhelpers == NULL ) {
> -                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
> -                return -2;
> -        }
> -
> -	if( !sql_n || (xmlStrcmp(sql_n->name, (xmlChar *) "sqldata") != 0) ) {
> -		writelog(log, LOG_ERR,
> -			 "sqldataGetFid: Input XML document is not a valid sqldata document");
> -		return -2;
> -	}
> -
> -	f_n = xmlFindNode(sql_n, "fields");
> -	if( !f_n || !f_n->children ) {
> -		writelog(log, LOG_ERR,
> -			 "sqldataGetFid: Input XML document does not contain a fields section");
> -		return -2;
> -	}
> -
> -	foreach_xmlnode(f_n->children, f_n) {
> -		if( (f_n->type != XML_ELEMENT_NODE)
> -		    || xmlStrcmp(f_n->name, (xmlChar *) "field") != 0 ) {
> -			// Skip uninteresting nodes
> -			continue;
> -		}
> -
> -		if( strcmp(xmlExtractContent(f_n), fname) == 0 ) {
> -			char *fid = xmlGetAttrValue(f_n->properties, "fid");
> -			if( !fid ) {
> -				writelog(log, LOG_ERR,
> -					 "sqldataGetFid: Field node is missing 'fid' attribute (field: %s)",
> -					 fname);
> -				return -2;
> -			}
> -			return atoi_nullsafe(fid);
> -		}
> -	}
> -	return -1;
> -}
> -
> -
> -/**
> - * Retrieves the value of a particular field in an sqldata XML document.
> - *
> - * @param log    Log context
> - * @param sqld   pointer to an sqldata XML document.
> - * @param fname  String containing the field name to extract the value of.
> - * @param recid  Integer containing the record ID of the record to extract the value.  This starts
> - *               on 0.
> - *
> - * @return Returns a pointer to a new memory buffer containing the extracted value.  On errors or if
> - *         recid is higher than available records, NULL is returned.
> - */
> -char *sqldataGetValue(LogContext *log, xmlDoc *sqld, const char *fname, int recid ) {
> -	xmlNode *r_n = NULL;
> -	int fid = -3, rc = 0;
> -
> -        if( xmlparser_dbhelpers == NULL ) {
> -                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
> -                return NULL;
> -        }
> -
> -	if( recid < 0 ) {
> -		writelog(log, LOG_ERR, "sqldataGetValue: Invalid recid");
> -		return NULL;
> -	}
> -
> -	r_n = xmlDocGetRootElement(sqld);
> -	if( !r_n || (xmlStrcmp(r_n->name, (xmlChar *) "sqldata") != 0) ) {
> -		writelog(log, LOG_ERR,
> -			 "sqldataGetValue: Input XML document is not a valid sqldata document");
> -		return NULL;
> -	}
> -
> -	fid = sqldataGetFid(log, r_n, fname);
> -	if( fid < 0 ) {
> -		return NULL;
> -	}
> -
> -	r_n = xmlFindNode(r_n, "records");
> -	if( !r_n || !r_n->children ) {
> -		writelog(log, LOG_ERR,
> -			 "sqldataGetValue: Input XML document does not contain a records section");
> -		return NULL;
> -	}
> -
> -	foreach_xmlnode(r_n->children, r_n) {
> -		if( (r_n->type != XML_ELEMENT_NODE)
> -		    || xmlStrcmp(r_n->name, (xmlChar *) "record") != 0 ) {
> -			// Skip uninteresting nodes
> -			continue;
> -		}
> -		if( rc == recid ) {
> -			xmlNode *v_n = NULL;
> -			// The rigth record is found, find the field we're looking for
> -			foreach_xmlnode(r_n->children, v_n) {
> -				char *fid_s = NULL;
> -				if( (v_n->type != XML_ELEMENT_NODE)
> -				    || (xmlStrcmp(v_n->name, (xmlChar *) "value") != 0) ) {
> -					// Skip uninteresting nodes
> -					continue;
> -				}
> -				fid_s = xmlGetAttrValue(v_n->properties, "fid");
> -				if( fid_s && (fid == atoi_nullsafe(fid_s)) ) {
> -					return sqldataExtractContent(log, v_n);
> -				}
> -			}
> -		}
> -		rc++;
> -	}
> -	return NULL;
> -}
> -
> -
> -/**
> - * Helper function to parse an sqldata XML document for the systems_hostname table.  In addition
> - * it will also return two strings containing hostname and ipaddress of the host.
> - *
> - * @param log        Log context
> - * @param xslt       Pointer to an xmlparser.xml XSLT template
> - * @param summaryxml rteval XML report document
> - * @param syskey     Integer containing the syskey value corresponding to this host
> - * @param hostname   Return pointer for where the hostname will be saved.
> - * @param ipaddr     Return pointer for where the IP address will be saved.
> - *
> - * @return Returns a sqldata XML document on success.  In this case the hostname and ipaddr will point
> - *         at memory buffers containing hostname and ipaddress.  These values must be free'd after usage.
> - *         On errors the function will return NULL and hostname and ipaddr will not have been touched
> - *         at all.
> - */
> -xmlDoc *sqldataGetHostInfo(LogContext *log, xsltStylesheet *xslt, xmlDoc *summaryxml,
> -			   int syskey, char **hostname, char **ipaddr)
> -{
> -	xmlDoc *hostinfo_d = NULL;
> -	parseParams prms;
> -
> -        if( xmlparser_dbhelpers == NULL ) {
> -                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
> -                return NULL;
> -        }
> -
> -	memset(&prms, 0, sizeof(parseParams));
> -	prms.table = "systems_hostname";
> -	prms.syskey = syskey;
> -
> -	hostinfo_d = parseToSQLdata(log, xslt, summaryxml, &prms);
> -	if( !hostinfo_d ) {
> -		writelog(log, LOG_ERR,
> -			 "sqldatGetHostInfo: Could not parse input XML data");
> -		xmlFreeDoc(hostinfo_d);
> -		goto exit;
> -	}
> -
> -	// Grab hostname from input XML
> -	*hostname = sqldataGetValue(log, hostinfo_d, "hostname", 0);
> -	if( !hostname ) {
> -		writelog(log, LOG_ERR,
> -			"sqldatGetHostInfo: Could not retrieve the hostname field from the input XML");
> -		xmlFreeDoc(hostinfo_d);
> -		goto exit;
> -	}
> -
> -	// Grab ipaddr from input XML
> -	*ipaddr = sqldataGetValue(log, hostinfo_d, "ipaddr", 0);
> -	if( !ipaddr ) {
> -		writelog(log, LOG_ERR,
> -			"sqldatGetHostInfo: Could not retrieve the IP address field from the input XML");
> -		free_nullsafe(hostname);
> -		xmlFreeDoc(hostinfo_d);
> -		goto exit;
> -	}
> - exit:
> -	return hostinfo_d;
> -}
> -
> -int sqldataGetRequiredSchemaVer(LogContext *log, xmlNode *sqldata_root)
> -{
> -	char *schver = NULL, *cp = NULL, *ptr = NULL;
> -	int majv = 0, minv = 0;
> -
> -        if( xmlparser_dbhelpers == NULL ) {
> -                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
> -                return -1;
> -        }
> -
> -	if( !sqldata_root || (xmlStrcmp(sqldata_root->name, (xmlChar *) "sqldata") != 0) ) {
> -		writelog(log, LOG_ERR, "sqldataGetRequiredSchemaVer: Invalid document node");
> -		return -1;
> -	}
> -
> -	schver = xmlGetAttrValue(sqldata_root->properties, "schemaver");
> -	if( schver == NULL ) {
> -		return 100;  // If not defined, presume lowest available version.
> -	}
> -	cp = strdup(schver);
> -	assert( cp != NULL );
> -
> -	if( (ptr = strpbrk(cp, ".")) != NULL ) {
> -		*ptr = 0;
> -		ptr++;
> -		majv = atoi_nullsafe(cp);
> -		minv = atoi_nullsafe(ptr);
> -	} else {
> -		majv = atoi_nullsafe(cp);
> -		minv = 0;
> -	}
> -	free_nullsafe(cp);
> -
> -	return (majv * 100) + minv;
> -}
> diff --git a/server/parser/xmlparser.h b/server/parser/xmlparser.h
> deleted file mode 100644
> index 1aa3977..0000000
> --- a/server/parser/xmlparser.h
> +++ /dev/null
> @@ -1,75 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-only */
> -/*
> - * Copyright (C) 2009 Red Hat Inc.
> - *
> - * David Sommerseth <davids@redhat.com>
> - *
> - *
> - */
> -
> -/**
> - * @file   xmlparser.h
> - * @author David Sommerseth <davids@redhat.com>
> - * @date   Wed Oct 7 17:27:39 2009
> - *
> - * @brief Parses summary.xml reports from rteval into a standardised XML format
> - *        which is useful when putting data into a database.
> - *
> - */
> -
> -
> -#ifndef _XMLPARSER_H
> -#define _XMLPARSER_H
> -
> -/**
> - *  Parameters needed by the the xmlparser.xsl XSLT template.
> - */
> -typedef struct {
> -        const char *table;            /**< Which table to parse data for.  Required*/
> -        unsigned int submid;          /**< Submission ID, needed by the 'rtevalruns' table */
> -        unsigned int syskey;          /**< System key (referencing systems.syskey) */
> -        const char *report_filename;  /**< Filename to the saved report (after being parsed) */
> -        unsigned int rterid;          /**< References rtevalruns.rterid */
> -} parseParams;
> -
> -/**
> - * Container for string arrays
> - */
> -typedef struct {
> -        unsigned int size;
> -        char **data;
> -} array_str_t;
> -
> -array_str_t * strSplit(const char * str, const char * sep);
> -inline char * strGet(array_str_t * ar, unsigned int el);
> -inline unsigned int strSize(array_str_t * ar);
> -void strFree(array_str_t * ar);
> -
> -/** Simple for-loop iterator for array_str_t objects
> - *
> - * @param ptr Return pointer (char *) where the element data is returned
> - * @param idx Element index counter, declares where it should start and can be used
> - *            to track the iteration process.  Must be an int variable
> - * @param ar  The array_str_t object to iterate
> - */
> -#define for_array_str(ptr, idx, ar) for( ptr = ar->data[idx]; idx++ < ar->size; \
> -                                         ptr=(idx < ar->size ? ar->data[idx] : NULL) )
> -
> -/**
> - *  Database specific helper functions
> - */
> -typedef struct {
> -        char *(*dbh_FormatArray)(LogContext *log, xmlNode *sql_n); /** Formats data as arrays */
> -} dbhelper_func;
> -
> -void init_xmlparser(dbhelper_func const * dbhelpers);
> -char * sqldataValueHash(LogContext *log, xmlNode *sql_n);
> -xmlDoc *parseToSQLdata(LogContext *log, xsltStylesheet *xslt, xmlDoc *indata_d, parseParams *params);
> -char *sqldataExtractContent(LogContext *log, xmlNode *sql_n);
> -int sqldataGetFid(LogContext *log, xmlNode *sqld, const char *fname);
> -char *sqldataGetValue(LogContext *log, xmlDoc *sqld, const char *fname, int recid);
> -xmlDoc *sqldataGetHostInfo(LogContext *log, xsltStylesheet *xslt, xmlDoc *summaryxml,
> -			   int syskey, char **hostname, char **ipaddr);
> -int sqldataGetRequiredSchemaVer(LogContext *log, xmlNode *sqldata_root);
> -
> -#endif
> diff --git a/server/parser/xmlparser.xsl b/server/parser/xmlparser.xsl
> deleted file mode 100644
> index ddef1cc..0000000
> --- a/server/parser/xmlparser.xsl
> +++ /dev/null
> @@ -1,607 +0,0 @@
> -<?xml version="1.0"?>
> -<!-- SPDX-License-Identifier: GPL-2.0-only -->
> -<!--
> -     *
> -     *  GPLv2 - Copyright (C) 2009
> -     *          David Sommerseth <davids@redhat.com>
> -     *
> --->
> -
> -<xsl:stylesheet  version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
> -                 xmlns:math="http://exslt.org/math"
> -                 extension-element-prefixes="math">
> -  <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
> -
> -  <!-- Used for iterating CPU topology information -->
> -  <xsl:key name="pkgkey" match="cpu" use="@physical_package_id"/>
> -
> -
> -  <!-- Supported tables in reports in rteval v1.37 and older -->
> -  <xsl:template match="/rteval['2.0' > @version]">
> -    <xsl:choose>
> -      <!-- TABLE: systems -->
> -      <xsl:when test="$table = 'systems'">
> -        <xsl:apply-templates select="HardwareInfo" mode="tbl_systems"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: systems_hostname -->
> -      <xsl:when test="$table = 'systems_hostname'">
> -        <xsl:apply-templates select="." mode="tbl_systems_hostname"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: rtevalruns -->
> -      <xsl:when test="$table = 'rtevalruns'">
> -        <xsl:apply-templates select="." mode="tbl_rtevalruns"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: rtevalruns_details -->
> -      <xsl:when test="$table = 'rtevalruns_details'">
> -        <xsl:apply-templates select="." mode="tbl_rtevalruns_details"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: cyclic_statistics -->
> -      <xsl:when test="$table = 'cyclic_statistics'">
> -        <xsl:apply-templates select="cyclictest" mode="tbl_cyclictest_statistics"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: cyclic_histogram -->
> -      <xsl:when test="$table = 'cyclic_histogram'">
> -        <xsl:apply-templates select="cyclictest" mode="tbl_cyclictest_histogram"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: cyclic_rawdata - only used by rteval v1.4 and earlier -->
> -      <xsl:when test="$table = 'cyclic_rawdata'">
> -        <xsl:if test="string(number($rterid)) = 'NaN'">
> -          <xsl:message terminate="yes">
> -            <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -          </xsl:message>
> -        </xsl:if>
> -	<sqldata schemaver="1.0" table="cyclic_rawdata">
> -	  <fields>
> -            <field fid="0">rterid</field>
> -            <field fid="1">cpu_num</field>
> -            <field fid="2">sampleseq</field>
> -            <field fid="3">latency</field>
> -	  </fields>
> -	  <records>
> -            <xsl:for-each select="cyclictest/RawSampleData/Thread/Sample">
> -              <record>
> -		<value fid="0"><xsl:value-of select="$rterid"/></value>
> -		<value fid="1"><xsl:value-of select="../@id"/></value>
> -		<value fid="2"><xsl:value-of select="@seq"/></value>
> -		<value fid="3"><xsl:value-of select="@latency"/></value>
> -              </record>
> -            </xsl:for-each>
> -	  </records>
> -	</sqldata>
> -      </xsl:when>
> -
> -      <!-- Tables only used by rteval v2.0 and newer - just ignore them to avoid parsing warnings -->
> -      <xsl:when test="$table = 'hwlatdetect_summary'">
> -      </xsl:when>
> -      <xsl:when test="$table = 'hwlatdetect_samples'">
> -      </xsl:when>
> -
> -      <xsl:otherwise>
> -        <xsl:message terminate="yes">
> -          <xsl:text>Invalid 'table' parameter value: </xsl:text><xsl:value-of select="$table"/>
> -        </xsl:message>
> -      </xsl:otherwise>
> -    </xsl:choose>
> -  </xsl:template>
> -
> -
> -  <!-- Supported tables in reports from rteval v2.0 and newer -->
> -  <xsl:template match="/rteval[@version >= '2.0']">
> -    <xsl:choose>
> -      <!-- TABLE: systems -->
> -      <xsl:when test="$table = 'systems'">
> -        <xsl:apply-templates select="SystemInfo/DMIinfo/HardwareInfo" mode="tbl_systems"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: systems_hostname -->
> -      <xsl:when test="$table = 'systems_hostname'">
> -        <xsl:apply-templates select="SystemInfo" mode="tbl_systems_hostname"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: rtevalruns -->
> -      <xsl:when test="$table = 'rtevalruns'">
> -        <xsl:apply-templates select="." mode="tbl_rtevalruns"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: rtevalruns_details -->
> -      <xsl:when test="$table = 'rtevalruns_details'">
> -        <xsl:apply-templates select="SystemInfo" mode="tbl_rtevalruns_details"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: cyclic_statistics -->
> -      <xsl:when test="$table = 'cyclic_statistics'">
> -        <xsl:apply-templates select="Measurements/Profile/cyclictest" mode="tbl_cyclictest_statistics"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: cyclic_histogram -->
> -      <xsl:when test="$table = 'cyclic_histogram'">
> -        <xsl:apply-templates select="Measurements/Profile/cyclictest" mode="tbl_cyclictest_histogram"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: hwlatdetect_summary -->
> -      <xsl:when test="$table = 'hwlatdetect_summary'">
> -        <xsl:apply-templates select="Measurements/Profile/hwlatdetect" mode="tbl_hwlatdetect_summary"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: hwlatdetect_samples -->
> -      <xsl:when test="$table = 'hwlatdetect_samples'">
> -        <xsl:apply-templates select="Measurements/Profile/hwlatdetect/samples" mode="tbl_hwlatdetect_samples"/>
> -      </xsl:when>
> -
> -      <!-- TABLE: cyclic_rawdata - only used by rteval v1.4 and earlier -->
> -      <xsl:when test="$table = 'cyclic_rawdata'"> <!-- Just ignore this one - avoids parsing warnings -->
> -      </xsl:when>
> -
> -      <xsl:otherwise>
> -        <xsl:message terminate="yes">
> -          <xsl:text>Invalid 'table' parameter value: </xsl:text><xsl:value-of select="$table"/>
> -        </xsl:message>
> -      </xsl:otherwise>
> -    </xsl:choose>
> -  </xsl:template>
> -
> -
> -
> -
> -
> -  <!-- TABLE: systems - all rteval versions -->
> -  <xsl:template match="/rteval['2.0' > @version]/HardwareInfo|/rteval[@version >= '2.0']/SystemInfo/DMIinfo/HardwareInfo" mode="tbl_systems">
> -    <sqldata schemaver="1.0" table="systems" key="syskey">
> -      <fields>
> -        <field fid="0">sysid</field>
> -        <field fid="1">dmidata</field>
> -      </fields>
> -      <records>
> -        <record>
> -          <value fid="0" hash="sha1">
> -            <xsl:value-of select="concat(@SystemUUID,':',@SerialNo)"/>
> -          </value>
> -          <value fid="1" type="xmlblob">
> -            <xsl:copy-of select="."/>
> -          </value>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -
> -
> -  <!-- TABLE: systems_hostname - rteval v1.37 or older -->
> -  <xsl:template match="/rteval['2.0' > @version]" mode="tbl_systems_hostname">
> -    <xsl:if test="string(number($syskey)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'syskey' parameter value: </xsl:text><xsl:value-of select="syskey"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <sqldata schemaver="1.0" table="systems_hostname">
> -      <xsl:call-template name="fields_systems_hostname"/>
> -      <records>
> -        <record>
> -          <value fid="0"><xsl:value-of select="$syskey"/></value>
> -          <value fid="1"><xsl:value-of select="uname/node"/></value>
> -          <value fid="2"><xsl:value-of select="network_config/interface/IPv4[@defaultgw=1]/@ipaddr"/></value>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <!-- TABLE: systems_hostname - rteval v2.0 or newer -->
> -  <xsl:template match="/rteval[@version >= '2.0']/SystemInfo" mode="tbl_systems_hostname">
> -    <xsl:if test="string(number($syskey)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'syskey' parameter value: </xsl:text><xsl:value-of select="syskey"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <sqldata schemaver="1.0" table="systems_hostname">
> -      <xsl:call-template name="fields_systems_hostname"/>
> -      <records>
> -        <record>
> -          <value fid="0"><xsl:value-of select="$syskey"/></value>
> -          <value fid="1"><xsl:value-of select="uname/node"/></value>
> -          <value fid="2"><xsl:value-of select="NetworkConfig/interface/IPv4[@defaultgw=1]/@ipaddr"/></value>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <xsl:template name="fields_systems_hostname">
> -    <fields>
> -      <field fid="0">syskey</field>
> -      <field fid="1">hostname</field>
> -      <field fid="2">ipaddr</field>
> -    </fields>
> -  </xsl:template>
> -
> -
> -
> -  <!-- TABLE: rtevalruns - rteval v1.37 or older -->
> -  <xsl:template match="/rteval['2.0' > @version]" mode="tbl_rtevalruns">
> -    <sqldata schemaver="1.2" table="rtevalruns">
> -      <xsl:call-template name="fields_rtevalruns"/>
> -      <records>
> -        <record>
> -          <value fid="0"><xsl:value-of select="$syskey"/></value>
> -          <value fid="1"><xsl:value-of select="uname/kernel"/></value>
> -          <value fid="2"><xsl:choose>
> -            <xsl:when test="uname/kernel/@is_RT = '1'">true</xsl:when>
> -            <xsl:otherwise>false</xsl:otherwise></xsl:choose>
> -          </value>
> -          <value fid="3"><xsl:value-of select="uname/arch"/></value>
> -          <value fid="4"><xsl:value-of select="concat(run_info/date, ' ', run_info/time)"/></value>
> -          <value fid="5">
> -            <xsl:value-of select="(run_info/@days*86400)+(run_info/@hours*3600)
> -                                  +(run_info/@minutes*60)+(run_info/@seconds)"/>
> -          </value>
> -          <value fid="6"><xsl:value-of select="loads/@load_average"/></value>
> -          <value fid="7"><xsl:value-of select="@version"/></value>
> -          <value fid="8"><xsl:value-of select="$report_filename"/></value>
> -          <value fid="9"><xsl:value-of select="$rterid"/></value>
> -          <value fid="10"><xsl:value-of select="$submid"/></value>
> -          <value fid="11"><xsl:value-of select="uname/baseos"/></value>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <!-- TABLE: rtevalruns - rteval v2.0 or newer -->
> -  <xsl:template match="/rteval[@version >= '2.0']" mode="tbl_rtevalruns">
> -    <sqldata schemaver="1.2" table="rtevalruns">
> -      <xsl:call-template name="fields_rtevalruns"/>
> -      <records>
> -        <record>
> -          <value fid="0"><xsl:value-of select="$syskey"/></value>
> -          <value fid="1"><xsl:value-of select="SystemInfo/uname/kernel"/></value>
> -          <value fid="2"><xsl:choose>
> -            <xsl:when test="SystemInfo/uname/kernel/@is_RT = '1'">true</xsl:when>
> -            <xsl:otherwise>false</xsl:otherwise></xsl:choose>
> -          </value>
> -          <value fid="3"><xsl:value-of select="SystemInfo/uname/arch"/></value>
> -          <value fid="4"><xsl:value-of select="concat(run_info/date, ' ', run_info/time)"/></value>
> -          <value fid="5">
> -            <xsl:value-of select="(run_info/@days*86400)+(run_info/@hours*3600)
> -                                  +(run_info/@minutes*60)+(run_info/@seconds)"/>
> -          </value>
> -          <value fid="6"><xsl:value-of select="loads/@load_average"/></value>
> -          <value fid="7"><xsl:value-of select="@version"/></value>
> -          <value fid="8"><xsl:value-of select="$report_filename"/></value>
> -          <value fid="9"><xsl:value-of select="$rterid"/></value>
> -          <value fid="10"><xsl:value-of select="$submid"/></value>
> -          <value fid="11"><xsl:value-of select="SystemInfo/uname/baseos"/></value>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <xsl:template name="fields_rtevalruns">
> -    <xsl:if test="string(number($syskey)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'syskey' parameter value: </xsl:text><xsl:value-of select="syskey"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <xsl:if test="string(number($rterid)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <xsl:if test="string(number($submid)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'submid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <xsl:if test="$report_filename = ''">
> -      <xsl:message terminate="yes">
> -        <xsl:text>The parameter 'report_filename' parameter cannot be empty</xsl:text>
> -      </xsl:message>
> -    </xsl:if>
> -      <fields>
> -        <field fid="0">syskey</field>
> -        <field fid="1">kernel_ver</field>
> -        <field fid="2">kernel_rt</field>
> -        <field fid="3">arch</field>
> -        <field fid="4">run_start</field>
> -        <field fid="5">run_duration</field>
> -        <field fid="6">load_avg</field>
> -        <field fid="7">version</field>
> -        <field fid="8">report_filename</field>
> -        <field fid="9">rterid</field>
> -        <field fid="10">submid</field>
> -        <field fid="11">distro</field>
> -      </fields>
> -  </xsl:template>
> -
> -
> -
> -  <!-- TABLE: rtevalruns_details - rteval v1.37 or older -->
> -  <xsl:template match="/rteval['2.0' > @version]" mode="tbl_rtevalruns_details">
> -    <sqldata schemaver="1.4" table="rtevalruns_details">
> -      <xsl:call-template name="fields_rtevalruns_details"/>
> -      <records>
> -        <record>
> -          <value fid="0"><xsl:value-of select="$rterid"/></value>
> -          <value fid="1"><xsl:value-of select="hardware/numa_nodes"/></value>
> -          <value fid="2">
> -            <xsl:choose>
> -              <xsl:when test="hardware/cpu_topology">
> -                <xsl:value-of select="hardware/cpu_topology/@num_cpu_cores"/>
> -              </xsl:when>
> -              <xsl:otherwise>
> -                <xsl:value-of select="hardware/cpu_cores"/>
> -              </xsl:otherwise>
> -            </xsl:choose>
> -          </value>
> -          <value fid="3">
> -            <xsl:value-of select="hardware/cpu_topology/@num_cpu_sockets"/>
> -          </value>
> -          <value fid="4" type="xmlblob">
> -            <rteval_details>
> -              <xsl:copy-of select="clocksource|services|kthreads|network_config|loads|cyclictest/command_line"/>
> -              <hardware>
> -                <xsl:copy-of select="hardware/memory_size|hardware/cpu_topology"/>
> -              </hardware>
> -            </rteval_details>
> -          </value>
> -          <value fid="5"><xsl:value-of select="run_info/annotate"/></value>
> -          <value fid="6" type="array">
> -            <xsl:for-each select="hardware/cpu_topology/cpu[generate-id() = generate-id(key('pkgkey', @physical_package_id)[1])]">
> -              <xsl:call-template name="count_core_spread_v1x">
> -                <xsl:with-param name="pkgid" select="@physical_package_id"/>
> -              </xsl:call-template>
> -            </xsl:for-each>
> -          </value>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <!-- TABLE: rtevalruns_details - rteval v2.0 or newer -->
> -  <xsl:template match="/rteval[@version >= '2.0']/SystemInfo" mode="tbl_rtevalruns_details">
> -    <sqldata schemaver="1.4" table="rtevalruns_details">
> -      <xsl:call-template name="fields_rtevalruns_details"/>
> -      <records>
> -        <record>
> -          <value fid="0"><xsl:value-of select="$rterid"/></value>
> -          <value fid="1"><xsl:value-of select="Memory/numa_nodes"/></value>
> -          <value fid="2">
> -            <xsl:value-of select="CPUtopology/@num_cpu_cores"/>
> -          </value>
> -          <value fid="3">
> -            <xsl:value-of select="CPUtopology/@num_cpu_sockets"/>
> -          </value>
> -          <value fid="4" type="xmlblob">
> -            <rteval_details format="2">
> -              <xsl:copy-of select="Kernel/ClockSource|Services|Kernel/kthreads|NetworkConfig"/>
> -              <xsl:copy-of select="../loads"/>
> -              <Measurement>
> -                <xsl:for-each select="../Measurements/Profile/*">
> -                  <module>
> -                    <xsl:attribute name="name"><xsl:value-of select="name(.)"/></xsl:attribute>
> -                    <xsl:if test="@command_line">
> -                      <command_line><xsl:value-of select="@command_line"/></command_line>
> -                    </xsl:if>
> -                    <xsl:copy-of select="timestamps"/>
> -                  </module>
> -                </xsl:for-each>
> -              </Measurement>
> -              <hardware>
> -                <xsl:copy-of select="Memory|CPUtopology"/>
> -              </hardware>
> -            </rteval_details>
> -          </value>
> -          <value fid="5"><xsl:value-of select="../run_info/annotate"/></value>
> -          <value fid="6" type="array">
> -            <xsl:for-each select="CPUtopology/cpu[generate-id() = generate-id(key('pkgkey', @physical_package_id)[1])]">
> -              <xsl:call-template name="count_core_spread_v2x">
> -                <xsl:with-param name="pkgid" select="@physical_package_id"/>
> -              </xsl:call-template>
> -            </xsl:for-each>
> -          </value>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <xsl:template name="fields_rtevalruns_details">
> -    <xsl:if test="string(number($rterid)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <fields>
> -      <field fid="0">rterid</field>
> -      <field fid="1">numa_nodes</field>
> -      <field fid="2">num_cpu_cores</field>
> -      <field fid="3">num_cpu_sockets</field>
> -      <field fid="4">xmldata</field>
> -      <field fid="5">annotation</field>
> -      <field fid="6">cpu_core_spread</field>
> -    </fields>
> -  </xsl:template>
> -
> -
> -
> -  <!-- TABLE: cyclic_statistics - rteval - all version -->
> -  <xsl:template match="/rteval['2.0' > @version]/cyclictest|/rteval[@version >= '2.0']/Measurements/Profile/cyclictest"
> -                mode="tbl_cyclictest_statistics">
> -    <xsl:if test="string(number($rterid)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <sqldata schemaver="1.1" table="cyclic_statistics">
> -      <fields>
> -        <field fid="0">rterid</field>
> -        <field fid="1">coreid</field>
> -        <field fid="2">priority</field>
> -        <field fid="3">num_samples</field>
> -        <field fid="4">lat_min</field>
> -        <field fid="5">lat_max</field>
> -        <field fid="6">lat_mean</field>
> -        <field fid="7">mode</field>
> -        <field fid="8">range</field>
> -        <field fid="9">median</field>
> -        <field fid="10">stddev</field>
> -        <field fid="11">mean_abs_dev</field>
> -      </fields>
> -      <records>
> -        <xsl:for-each select="core/statistics[samples > 0]|system/statistics[samples > 0]">
> -          <record>
> -            <value fid="0"><xsl:value-of select="$rterid"/></value>
> -            <value fid="1"><xsl:choose>
> -              <xsl:when test="../@id"><xsl:value-of select="../@id"/></xsl:when>
> -              <xsl:otherwise><xsl:attribute name="isnull">1</xsl:attribute></xsl:otherwise></xsl:choose>
> -            </value>
> -            <value fid="2"><xsl:choose>
> -              <xsl:when test="../@priority"><xsl:value-of select="../@priority"/></xsl:when>
> -              <xsl:otherwise><xsl:attribute name="isnull">1</xsl:attribute></xsl:otherwise></xsl:choose>
> -            </value>
> -            <value fid="3"><xsl:value-of select="samples"/></value>
> -            <value fid="4"><xsl:value-of select="minimum"/></value>
> -            <value fid="5"><xsl:value-of select="maximum"/></value>
> -            <value fid="6"><xsl:value-of select="mean"/></value>
> -            <value fid="7"><xsl:value-of select="mode"/></value>
> -            <value fid="8"><xsl:value-of select="range"/></value>
> -            <value fid="9"><xsl:value-of select="median"/></value>
> -            <value fid="10"><xsl:value-of select="standard_deviation"/></value>
> -            <value fid="11"><xsl:value-of select="mean_absolute_deviation"/></value>
> -          </record>
> -        </xsl:for-each>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -
> -
> -  <!-- TABLE: cyclic_histogram - rteval - all version -->
> -  <xsl:template match="/rteval['2.0' > @version]/cyclictest|/rteval[@version >= '2.0']/Measurements/Profile/cyclictest"
> -                mode="tbl_cyclictest_histogram">
> -    <xsl:if test="string(number($rterid)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <sqldata schemaver="1.0" table="cyclic_histogram">
> -      <fields>
> -        <field fid="0">rterid</field>
> -        <field fid="1">core</field>
> -        <field fid="2">index</field>
> -        <field fid="3">value</field>
> -      </fields>
> -      <records>
> -        <!-- Do it in this order, so the overall system results are parsed first -->
> -        <xsl:apply-templates select="./system/histogram/bucket" mode="cyclic_histogram_rec_sql"/>
> -        <xsl:apply-templates select="./core/histogram/bucket" mode="cyclic_histogram_rec_sql"/>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <xsl:template match="/rteval['2.0' > @version]/cyclictest/*/histogram/bucket|/rteval[@version >= '2.0']/Measurements/Profile/cyclictest/*/histogram/bucket"
> -		mode="cyclic_histogram_rec_sql">
> -      <record>
> -	<value fid="0"><xsl:value-of select="$rterid"/></value>
> -	<value fid="1"><xsl:value-of select="../../@id"/></value>
> -	<value fid="2"><xsl:value-of select="@index"/></value>
> -	<value fid="3"><xsl:value-of select="@value"/></value>
> -      </record>
> -  </xsl:template>
> -
> -
> -
> -  <!-- TABLE: hwlatdetect_summar - only for rteval 2.0 and newer -->
> -  <xsl:template match="/rteval[@version >= '2.0']/Measurements/Profile/hwlatdetect" mode="tbl_hwlatdetect_summary">
> -    <xsl:if test="string(number($rterid)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <sqldata schemaver="1.5" table="hwlatdetect_summary">
> -      <fields>
> -        <field fid="0">rterid</field>
> -        <field fid="1">duration</field>
> -        <field fid="2">threshold</field>
> -        <field fid="3">timewindow</field>
> -        <field fid="4">width</field>
> -        <field fid="5">samplecount</field>
> -        <field fid="6">hwlat_min</field>
> -        <field fid="7">hwlat_avg</field>
> -        <field fid="8">hwlat_max</field>
> -      </fields>
> -      <records>
> -        <record>
> -          <value fid="0"><xsl:value-of select="$rterid"/></value>
> -          <value fid="1"><xsl:value-of select="RunParams/@duration"/></value>
> -          <value fid="2"><xsl:value-of select="RunParams/@threshold"/></value>
> -          <value fid="3"><xsl:value-of select="RunParams/@window"/></value>
> -          <value fid="4"><xsl:value-of select="RunParams/@width"/></value>
> -          <value fid="5"><xsl:value-of select="samples/@count"/></value>
> -          <xsl:choose>
> -            <xsl:when test="samples/@count > 0">
> -              <value fid="6"><xsl:value-of select="math:min(samples/sample/@duration)"/></value>
> -              <value fid="7"><xsl:value-of select="sum(samples/sample/@duration) div samples/@count"/></value>
> -              <value fid="8"><xsl:value-of select="math:max(samples/sample/@duration)"/></value>
> -            </xsl:when>
> -            <xsl:otherwise>
> -              <value fid="6">0</value>
> -              <value fid="7">0</value>
> -              <value fid="8">0</value>
> -            </xsl:otherwise>
> -          </xsl:choose>
> -        </record>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -
> -
> -  <!-- TABLE: hwlatdetect_samples - only for rteval 2.0 and newer -->
> -  <xsl:template match="/rteval[@version >='2.0']/Measurements/Profile/hwlatdetect/samples" mode="tbl_hwlatdetect_samples">
> -    <xsl:if test="string(number($rterid)) = 'NaN'">
> -      <xsl:message terminate="yes">
> -        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
> -      </xsl:message>
> -    </xsl:if>
> -    <sqldata schemaver="1.5" table="hwlatdetect_samples">
> -      <fields>
> -        <field fid="0">rterid</field>
> -        <field fid="1">timestamp</field>
> -        <field fid="2">latency</field>
> -      </fields>
> -      <records>
> -        <xsl:apply-templates select="sample" mode="hwlatdetect_samples"/>
> -      </records>
> -    </sqldata>
> -  </xsl:template>
> -
> -  <xsl:template match="/rteval[@version >='2.0']/Measurements/Profile/hwlatdetect[@format='1.0']/samples/sample" mode="hwlatdetect_samples">
> -    <record>
> -      <value fid="0"><xsl:value-of select="$rterid"/></value>
> -      <value fid="1"><xsl:value-of select="@timestamp"/></value>
> -      <value fid="2"><xsl:value-of select="@duration"/></value>
> -    </record>
> -  </xsl:template>
> -
> -
> -
> -
> -  <!-- Helper "function" for generating a core per physical socket spread overview - for rteval v1.37 or older -->
> -  <xsl:template name="count_core_spread_v1x">
> -    <xsl:param name="pkgid"/>
> -    <value>
> -      <xsl:value-of select="count(/rteval/hardware/cpu_topology/cpu[@physical_package_id = $pkgid])"/>
> -    </value>
> -  </xsl:template>
> -
> -  <!-- Helper "function" for generating a core per physical socket spread overview - for rteval v2.0 or newer -->
> -  <xsl:template name="count_core_spread_v2x">
> -    <xsl:param name="pkgid"/>
> -    <value>
> -      <xsl:value-of select="count(/rteval/SystemInfo/CPUtopology/cpu[@physical_package_id = $pkgid])"/>
> -    </value>
> -  </xsl:template>
> -
> -</xsl:stylesheet>
> diff --git a/server/remove_rtevalrun b/server/remove_rtevalrun
> deleted file mode 100755
> index 8772b33..0000000
> --- a/server/remove_rtevalrun
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -#!/usr/bin/python3 -tt
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   remove_rtevalrun
> -#   A script intended to be run on the database server, which
> -#   removes a given rteval run, based on the 'rterid' value
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import sys
> -import getpass
> -from argparse import ArgumentParser
> -from database import Database
> -
> -def do_delete(dbc, table, rterid):
> -    print "Cleaning up %s ..." % table,
> -    try:
> -        res = dbc.DELETE(table, {"rterid": int(rterid)})
> -        print "%i rows deleted" % res
> -    except Exception, err:
> -        print " ** FAILED **"
> -        print err
> -        dbc.ROLLBACK()
> -        sys.exit(2)
> -
> -
> -if __name__ == '__main__':
> -    parser = ArgumentParser(version="%prog v0.1")
> -
> -    parser.add_argument("-H", "--host", action="store", dest="dbhost", default="localhost",
> -                      help="Database server to connect to (default: %default)",
> -                      metavar="HOST")
> -    parser.add_argument("-p", "--port", action="store", dest="dbport", default="5432",
> -                      help="Database server port to use (default: %default)", metavar="PORT")
> -    parser.add_argument("-U", "--user", action="store", dest="dbuser", default="rtevaladmin",
> -                      help="Database user to connect as (default: %default)", metavar="USERNAME")
> -    parser.add_argument("-d", "--database", action="store", dest="dbname", default="rteval",
> -                      help="Database to use (default: %default)", metavar="DATABASE")
> -    parser.add_argument("-r", "--rterid", action="store", dest="rterid", default=None,
> -                      help="rteval run id to remove from the database", metavar="INTEGER")
> -    opts = parser.parse_args()
> -
> -    if opts.rterid is None:
> -        print "%s:  Missing --rterid value" % sys.argv[0]
> -        sys.exit(1)
> -
> -    dbpwd = getpass.getpass("Database password for '%s': " % opts.dbuser)
> -
> -    try:
> -        dbc = Database(host=opts.dbhost, port=opts.dbport,
> -                       user=opts.dbuser, password=dbpwd, database=opts.dbname)
> -    except Exception, err:
> -        print "Could not connect to the database: %s" % str(err)
> -        sys.exit(2)
> -
> -    # Do the cleanup
> -    do_delete(dbc, "cyclic_rawdata", opts.rterid)
> -    do_delete(dbc, "cyclic_statistics", opts.rterid)
> -    do_delete(dbc, "rtevalruns_details", opts.rterid)
> -    do_delete(dbc, "rtevalruns", opts.rterid)
> -
> -    dbc.COMMIT()
> -else:
> -    raise Exception, "This is a standalone program, not a module to be imported"
> diff --git a/server/rteval-parser.spec b/server/rteval-parser.spec
> deleted file mode 100644
> index 00c75bf..0000000
> --- a/server/rteval-parser.spec
> +++ /dev/null
> @@ -1,133 +0,0 @@
> -Name:		rteval-parser
> -Version:	1.6
> -%define sqlschemaver 1.5
> -Release:	1%{?dist}
> -Summary:	Report parser daemon for  rteval XML-RPC
> -%define pkgname rteval-xmlrpc-%{version}
> -
> -Group:		Applications/System
> -License:	GPLv2
> -URL:		http://git.kernel.org/?p=linux/kernel/git/clrkwllms/rteval.git
> -Source0:	%{pkgname}.tar.gz
> -BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
> -
> -BuildRequires:	postgresql-devel libxml2-devel libxslt-devel
> -Requires:	postgresql httpd mod_wsgi
> -Requires(post): chkconfig
> -Requires(preun): chkconfig
> -Requires(preun): /sbin/service
> -
> -
> -%description
> -The XML parser daemon (rteval-parserd) will parse the received reports
> -and save them in a database for further processing.
> -
> -%package -n rteval-xmlrpc
> -Summary:	XML-RPC server and parser for rteval
> -BuildArch:	noarch
> -
> -
> -%description -n rteval-xmlrpc
> -The XML-RPC server is using Apache and mod_python to receive reports from
> -rteval clients submitting test results via an XML-RPC API.
> -
> -
> -%prep
> -%setup -q -n %{pkgname}
> -
> -
> -%build
> -%configure --with-xmlrpc-webroot=%{_localstatedir}/www/html/rteval --docdir=%{_defaultdocdir}/%{pkgname}
> -make %{?_smp_mflags}
> -
> -
> -%install
> -rm -rf $RPM_BUILD_ROOT
> -make install DESTDIR=$RPM_BUILD_ROOT
> -mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/httpd/conf.d
> -cp apache-rteval.conf $RPM_BUILD_ROOT/%{_sysconfdir}/httpd/conf.d/rteval-xmlrpc.conf
> -
> -# Move the init script and config file from docs, to the proper place on RHEL/Fedora
> -mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/init.d $RPM_BUILD_ROOT/%{_sysconfdir}/sysconfig
> -mv $RPM_BUILD_ROOT/%{_defaultdocdir}/%{pkgname}/initscripts/rteval-parserd.init $RPM_BUILD_ROOT/%{_sysconfdir}/init.d/rteval-parserd
> -mv $RPM_BUILD_ROOT/%{_defaultdocdir}/%{pkgname}/initscripts/rteval-parserd.sysconfig $RPM_BUILD_ROOT/%{_sysconfdir}/sysconfig/rteval-parserd
> -rmdir $RPM_BUILD_ROOT/%{_defaultdocdir}/%{pkgname}/initscripts
> -
> -
> -%post
> -/sbin/chkconfig --add rteval-parserd
> -
> -
> -%preun
> -if [ "$1" = 0 ] ; then
> -   /sbin/service rteval-parserd stop > /dev/null 2>&1
> -   /sbin/chkconfig --del rteval-parserd
> -fi
> -exit 0
> -
> -
> -%clean
> -rm -rf $RPM_BUILD_ROOT
> -
> -
> -%files
> -%defattr(-,root,root,-)
> -%doc COPYING parser/README.parser sql/rteval-%{sqlschemaver}.sql sql/delta-*_*.sql
> -%config(noreplace) %{_sysconfdir}/sysconfig/rteval-parserd
> -%attr(0755,root,root) %{_sysconfdir}/init.d/rteval-parserd
> -%{_bindir}/rteval-parserd
> -%{_datadir}/rteval/xmlparser.xsl
> -
> -
> -%files -n rteval-xmlrpc
> -%defattr(-,root,root,-)
> -%doc COPYING README.xmlrpc
> -%config(noreplace) %{_sysconfdir}/httpd/conf.d/rteval-xmlrpc.conf
> -%{_localstatedir}/www/html/rteval/
> -
> -
> -%changelog
> -* Thu Nov 15 2012 David Sommerseth <davids@redhat.com> - 1.6-1
> -- Make rteval-parserd have no hard coded measurement data table restrictions
> -- Added support for hwlatdetect data
> -
> -* Fri Oct  7 2011 David Sommerseth <dazo@users.sourceforge.net> - 1.5-1
> -- Added support for storing data as arrays in PostgreSQL
> -- Updated SQL schema to store CPU topology/core spread as an array in the database
> -
> -* Fri Feb  4 2011 David Sommerseth <dazo@users.sourceforge.net> - 1.4-1
> -- Added support for mod_wsgi
> -- Updated SQL schema, to add rteval annotations to an explicit database column
> -
> -* Fri Apr  9 2010 David Sommerseth <davids@redhat.com> - 1.3-1
> -- Updated XML-RPC server, added Hello method
> -
> -* Fri Mar 26 2010 David Sommerseth <davids@redhat.com> - 1.2-2
> -- Improved logging
> -
> -* Fri Mar 26 2010 David Sommerseth <davids@redhat.com> - 1.2-1
> -- Cleaned up xmlparser.xsl
> -- Honour 'isnull' attributes in SQL XML
> -- Improved IP address handling on system registration when ipaddr == NULL
> -- Fixed wrong GRANT statement in rteval_info table
> -
> -* Mon Mar 22 2010 David Sommerseth <davids@redhat.com> - 1.1-2
> -- rteval-xmlrpc.spec renamed to rteval-parser.spec
> -- Split XML-RPC noarch related files and the binary part with rteval-parserd
> -- Reorganised the .spec file - rteval-xmlrpc RPM is now a noarch sub-package
> -- Consider the renamed rteval_parserd -> rteval-parserd
> -- Install /etc/init.d/rteval-parserd and /etc/sysconfig/rteval-parserd
> -
> -* Tue Dec  8 2009 David Sommerseth <davids@redhat.com> - 1.1-1
> -- Updated to rteval-xmlrpc v1.1
> -  - Added new database table, rteval_info, containing some information about the
> -    rteval-xmlrpc installation
> -  - Made rteval_parserd aware of which SQL schema version it is working against
> -  - Added 'schemaver' attributes to <sqldata/> tags, defining which SQL schema
> -    version which is needed
> -  - Added mean_absolute_deviation and variance fields from rteval XML reports to
> -    the database
> -
> -* Thu Dec  3 2009 David Sommerseth <davids@redhat.com> - 1.0-1
> -- Inital rteval-xmlrpc.spec file
> -
> diff --git a/server/rteval_testserver.py b/server/rteval_testserver.py
> deleted file mode 100644
> index f141b52..0000000
> --- a/server/rteval_testserver.py
> +++ /dev/null
> @@ -1,107 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   rteval_testserver.py
> -#   Local XML-RPC test server.  Can be used to verify XML-RPC behavoiur
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import os
> -import sys
> -import signal
> -from xmlrpc.server import SimpleXMLRPCServer
> -from xmlrpc.server import SimpleXMLRPCRequestHandler
> -import argparse
> -
> -import xmlrpc_API1
> -from Logger import Logger
> -
> -# Default values
> -LISTEN="127.0.0.1"
> -PORT=65432
> -
> -# Restrict to a particular path.
> -class RequestHandler(SimpleXMLRPCRequestHandler):
> -    rpc_paths = ('/rteval/API1/',)
> -
> -
> -class RTevald_config(object):
> -    def __init__(self):
> -        self.config = {'datadir': '/tmp/rteval-xmlrpc-testsrv',
> -                       'db_server': 'localhost',
> -                       'db_port': 5432,
> -                       'database': 'dummy',
> -                       'db_username': None,
> -                       'db_password': None}
> -        self.__update_vars()
> -
> -    def __update_vars(self):
> -        for k in list(self.config.keys()):
> -            self.__dict__[k] = self.config[k]
> -
> -
> -class RTevald():
> -    def __init__(self, options, log):
> -        self.options = options
> -        self.log = log
> -        self.server = None
> -        self.config = RTevald_config()
> -
> -    def __prepare_datadir(self):
> -        startdir = os.getcwd()
> -        for dir in self.config.datadir.split("/"):
> -            if dir is '':
> -                continue
> -            if not os.path.exists(dir):
> -                os.mkdir(dir, 0o700)
> -            os.chdir(dir)
> -        if not os.path.exists('queue'):
> -            os.mkdir('queue', 0o700)
> -        os.chdir(startdir)
> -
> -    def StartServer(self):
> -        # Create server
> -        self.server = SimpleXMLRPCServer((self.options.listen, self.options.port),
> -                                         requestHandler=RequestHandler)
> -        self.server.register_introspection_functions()
> -
> -        # setup a class to handle requests
> -        self.server.register_instance(xmlrpc_API1.XMLRPC_API1(self.config, nodbaction=True, debug=True))
> -
> -        # Run the server's main loop
> -        self.log.Log("StartServer", "Listening on %s:%i" % (self.options.listen, self.options.port))
> -        try:
> -            self.__prepare_datadir()
> -            self.server.serve_forever()
> -        except KeyboardInterrupt:
> -            self.log.Log("StartServer", "Server caught SIGINT")
> -            self.server.shutdown()
> -        finally:
> -            self.log.Log("StartServer", "Server stopped")
> -
> -    def StopServer(self):
> -        self.server.shutdown()
> -
> -
> -logger = None
> -rtevalserver = None
> -
> -#
> -#  M A I N   F U N C T I O N
> -#
> -
> -if __name__ == '__main__':
> -    parser = argparse.ArgumentParser(version="%prog v0.1")
> -
> -    parser.add_argument("-L", "--listen", action="store", dest="listen", default=LISTEN,
> -                      help="Which interface to listen to [default: %default]", metavar="IPADDR")
> -    parser.add_argument("-P", "--port", action="store", type="int", dest="port", default=PORT,
> -                      help="Which port to listen to [default: %default]",  metavar="PORT")
> -    parser.add_argument("-l", "--log", action="store", dest="logfile", default=None,
> -                      help="Where to log requests.", metavar="FILE")
> -
> -    options = parser.parse_args()
> -
> -    logger = Logger(options.logfile, "RTeval")
> -    rtevalserver = RTevald(options, logger)
> -    rtevalserver.StartServer()
> diff --git a/server/rteval_xmlrpc.py b/server/rteval_xmlrpc.py
> deleted file mode 100644
> index b63b7d8..0000000
> --- a/server/rteval_xmlrpc.py
> +++ /dev/null
> @@ -1,71 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   rteval_xmlrpc.py
> -#   XML-RPC handler for mod_python which will receive requests
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import types
> -from mod_python import apache
> -from xmlrpc.client import dumps, loads, Fault
> -from xmlrpc_API1 import XMLRPC_API1
> -from rteval.rtevalConfig import rtevalConfig
> -
> -
> -def Dispatch(req, method, args):
> -    # Default configuration
> -    defcfg = {'xmlrpc_server': { 'datadir':     '/var/lib/rteval',
> -                                 'db_server':   'localhost',
> -                                 'db_port':     5432,
> -                                 'database':    'rteval',
> -                                 'db_username': 'rtevxmlrpc',
> -                                 'db_password': 'rtevaldb'
> -                                 }
> -              }
> -
> -    # Fetch configuration
> -    cfg = rtevalConfig(defcfg)
> -    cfg.Load(append=True)
> -
> -    # Prepare an object for executing the query
> -    xmlrpc = XMLRPC_API1(config=cfg.GetSection('xmlrpc_server'))
> -
> -    # Exectute it
> -    result = xmlrpc.Dispatch(method, args)
> -
> -    # Send the result
> -    if type(result) == tuple:
> -        req.write(dumps(result, None, methodresponse=1))
> -    else:
> -        req.write(dumps((result,), None, methodresponse=1))
> -
> -
> -def handler(req):
> -    # Only accept POST requests
> -    if req.method != 'POST':
> -        req.content_type = 'text/plain'
> -        req.send_http_header()
> -        req.write("Not valid XML-RPC POST request")
> -        return apache.OK
> -
> -    # Fetch the request
> -    body = req.read()
> -
> -    # Prepare response
> -    req.content_type = "text/xml"
> -    req.send_http_header()
> -
> -    # Process request
> -    try:
> -        args, method = loads(body)
> -    except:
> -        fault = Fault(0x001, "Invalid XML-RPC error")
> -        req.write(dumps(fault, methodresponse=1))
> -        return apache.OK
> -
> -    # Execute it.  The calling function is
> -    # responsive for responding to the request.
> -    Dispatch(req, method, args)
> -
> -    return apache.OK
> diff --git a/server/rteval_xmlrpc.wsgi b/server/rteval_xmlrpc.wsgi
> deleted file mode 100644
> index 1bf6661..0000000
> --- a/server/rteval_xmlrpc.wsgi
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   rteval_xmlrpc.wsgi
> -#   XML-RPC handler for the rteval server, using mod_wsgi
> -#
> -#   Copyright 2011 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -from wsgiref.simple_server import make_server
> -import types
> -from xmlrpclib import dumps, loads, Fault
> -from xmlrpc_API1 import XMLRPC_API1
> -from rteval.rtevalConfig import rtevalConfig
> -
> -def rtevalXMLRPC_Dispatch(method, args):
> -    # Default configuration
> -    defcfg = {'xmlrpc_server': { 'datadir':     './var/lib/rteval',
> -                                 'db_server':   'localhost',
> -                                 'db_port':     5432,
> -                                 'database':    'rteval',
> -                                 'db_username': 'rtevxmlrpc',
> -                                 'db_password': 'rtevaldb'
> -                                 }
> -              }
> -
> -    # Fetch configuration
> -    cfg = rtevalConfig(defcfg)
> -    cfg.Load(append=True)
> -
> -    # Prepare an object for executing the query
> -    xmlrpc = XMLRPC_API1(config=cfg.GetSection('xmlrpc_server'))
> -
> -    # Exectute it
> -    result = xmlrpc.Dispatch(method, args)
> -
> -    # Send the result
> -    if type(result) == types.TupleType:
> -        return dumps(result, None, methodresponse=1)
> -    else:
> -        return dumps((result,), None, methodresponse=1)
> -
> -
> -def rtevalXMLRPC_handler(environ, start_response):
> -
> -   # the environment variable CONTENT_LENGTH may be empty or missing
> -   try:
> -      request_body_size = int(environ.get('CONTENT_LENGTH', 0))
> -   except (ValueError):
> -      request_body_size = 0
> -
> -   # When the method is POST the query string will be sent
> -   # in the HTTP request body which is passed by the WSGI server
> -   # in the file like wsgi.input environment variable.
> -   try:
> -       if (environ['REQUEST_METHOD'] != 'POST') or (request_body_size < 1):
> -           raise Exception('Error in request')
> -
> -       request_body = environ['wsgi.input'].read(request_body_size)
> -       try:
> -           args, method = loads(request_body)
> -       except:
> -           raise Exception('Invalid XML-RPC request')
> -
> -       # Execute the XML-RPC call
> -       status = '200 OK'
> -       cont_type = 'text/xml'
> -       response = [rtevalXMLRPC_Dispatch(method, args)]
> -   except Exception, ex:
> -       status = '500 Internal server error: %s' % str(ex)
> -       cont_type = 'text/plain'
> -       response = [
> -           '500 Internal server error\n',
> -           'ERROR: %s' % str(ex)
> -           ]
> -       import traceback, sys
> -       traceback.print_exc(file=sys.stderr)
> -
> -   response_headers = [('Content-Type', cont_type),
> -                       ('Content-Length', str(len("".join(response))))]
> -   start_response(status, response_headers)
> -   return response
> -
> -
> -if __name__ == '__main__':
> -    #
> -    # Simple stand-alone XML-RPC server, if started manually
> -    # Not suitable for production environments, but for testing
> -    #
> -    httpd = make_server('localhost', 65432, rtevalXMLRPC_handler)
> -    try:
> -        httpd.serve_forever()
> -    except KeyboardInterrupt:
> -        print "\nShutting down"
> -
> diff --git a/server/rtevaldb.py b/server/rtevaldb.py
> deleted file mode 100644
> index b13c85b..0000000
> --- a/server/rtevaldb.py
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   rtevaldb.py
> -#   Function for registering a rteval summary.xml report into the database
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import os
> -from database import Database
> -
> -def register_submission(config, clientid, filename, debug=False, noaction=False):
> -    "Registers a submission of a rteval report which signalises the rteval_parserd process"
> -
> -    dbc = Database(host=config.db_server, port=config.db_port, database=config.database,
> -                   user=config.db_username, password=config.db_password,
> -                   debug=debug, noaction=noaction)
> -
> -    submvars = {"table": "submissionqueue",
> -                "fields": ["clientid", "filename"],
> -                "records": [[clientid, filename]],
> -                "returning": "submid"
> -                }
> -
> -    res = dbc.INSERT(submvars)
> -    if len(res) != 1:
> -        raise Exception("Could not register the submission")
> -
> -    dbc.COMMIT()
> -    return res[0]
> -
> -def database_status(config, debug=False, noaction=False):
> -    dbc = Database(host=config.db_server, port=config.db_port, database=config.database,
> -                   user=config.db_username, password=config.db_password,
> -                   debug=debug, noaction=noaction)
> -    if not dbc:
> -        return {"status": "No connection to pgsql://%s:%s/%s" % (config.db_server,
> -                                                                 config.db_port,
> -                                                                 config.database)}
> -
> -    res = dbc.SELECT('rtevalruns',
> -                     ["to_char(CURRENT_TIMESTAMP, 'YYYY-MM-DD HH24:MI:SS') AS server_time",
> -                      "max(rterid) AS last_rterid",
> -                      "max(submid) AS last_submid"]
> -                     )
> -    if len(res) != 3:
> -        return {"status": "Could not query database pgsql://%s:%s/%s" % (config.db_server,
> -                                                                         config.db_port,
> -                                                                         config.database)}
> -    last_rterid = res['records'][0][1] and res['records'][0][1] or "(None)"
> -    last_submid = res['records'][0][1] and res['records'][0][2] or "(None)"
> -    return {"status": "OK",
> -            "server_time": res['records'][0][0],
> -            "last_rterid": last_rterid,
> -            "last_submid": last_submid
> -            }
> -
> diff --git a/server/sql/delta-1.0_1.1.sql b/server/sql/delta-1.0_1.1.sql
> deleted file mode 100644
> index 9fe230e..0000000
> --- a/server/sql/delta-1.0_1.1.sql
> +++ /dev/null
> @@ -1,15 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- SQL delta update from rteval-1.0.sql to rteval-1.1.sql
> -
> -CREATE TABLE rteval_info (
> -       key    varchar(32) NOT NULL,
> -       value  TEXT NOT NULL,
> -       rtiid  SERIAL,
> -       PRIMARY KEY(rtiid)
> -);
> -GRANT SELECT ON rteval_info TO rtevparser;
> -INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.1');
> -
> -ALTER TABLE cyclic_statistics ADD COLUMN mean_abs_dev REAL;
> -ALTER TABLE cyclic_statistics ADD COLUMN variance REAL;
> -
> diff --git a/server/sql/delta-1.1_1.2.sql b/server/sql/delta-1.1_1.2.sql
> deleted file mode 100644
> index e5d82ab..0000000
> --- a/server/sql/delta-1.1_1.2.sql
> +++ /dev/null
> @@ -1,9 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- SQL delta update from rteval-1.1.sql to rteval-1.2.sql
> -
> -UPDATE rteval_info SET value = '1.2' WHERE key = 'sql_schema_ver';
> -
> -ALTER TABLE rtevalruns ADD COLUMN distro VARCHAR(128);
> -ALTER TABLE rtevalruns_details ADD COLUMN num_cpu_cores INTEGER;
> -ALTER TABLE rtevalruns_details ADD COLUMN num_cpu_sockets INTEGER;
> -ALTER TABLE rtevalruns_details ADD COLUMN numa_nodes INTEGER;
> diff --git a/server/sql/delta-1.2_1.3.sql b/server/sql/delta-1.2_1.3.sql
> deleted file mode 100644
> index 1c10bf2..0000000
> --- a/server/sql/delta-1.2_1.3.sql
> +++ /dev/null
> @@ -1,6 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- SQL delta update from rteval-1.2.sql to rteval-1.3.sql
> -
> -UPDATE rteval_info SET value = '1.3' WHERE key = 'sql_schema_ver';
> -
> -ALTER TABLE rtevalruns_details ADD COLUMN annotation TEXT;
> diff --git a/server/sql/delta-1.3_1.4.sql b/server/sql/delta-1.3_1.4.sql
> deleted file mode 100644
> index e0c0162..0000000
> --- a/server/sql/delta-1.3_1.4.sql
> +++ /dev/null
> @@ -1,6 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- SQL delta update from rteval-1.3.sql to rteval-1.4.sql
> -
> -UPDATE rteval_info SET value = '1.4' WHERE key = 'sql_schema_ver';
> -
> -ALTER TABLE rtevalruns_details ADD COLUMN cpu_core_spread INTEGER[];
> diff --git a/server/sql/delta-1.4_1.5.sql b/server/sql/delta-1.4_1.5.sql
> deleted file mode 100644
> index bd1336e..0000000
> --- a/server/sql/delta-1.4_1.5.sql
> +++ /dev/null
> @@ -1,31 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- SQL delta update from rteval-1.4.sql to rteval-1.5.sql
> -
> -UPDATE rteval_info SET value = '1.5' WHERE key = 'sql_schema_ver';
> -
> --- TABLE: hwlatdetect_summary
> --- Tracks hwlatdetect results for a particular hardware
> ---
> -   CREATE TABLE hwlatdetect_summary (
> -       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -       duration       INTEGER NOT NULL,
> -       threshold      INTEGER NOT NULL,
> -       timewindow     INTEGER NOT NULL,
> -       width          INTEGER NOT NULL,
> -       samplecount    INTEGER NOT NULL,
> -       hwlat_min      REAL NOT NULL,
> -       hwlat_avg      REAL NOT NULL,
> -       hwlat_max      REAL NOT NULL
> -   ) WITHOUT OIDS;
> -   GRANT SELECT, INSERT ON hwlatdetect_summary TO rtevparser;
> -
> --- TABLE: hwlatdetect_samples
> --- Contains the hwlatdetect sample records from a particular run
> ---
> -   CREATE TABLE hwlatdetect_samples (
> -       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -       timestamp      NUMERIC(20,10) NOT NULL,
> -       latency        REAL NOT NULL
> -   ) WITHOUT OIDS;
> -   GRANT SELECT, INSERT ON hwlatdetect_samples TO rtevparser;
> -
> diff --git a/server/sql/rteval-1.0.sql b/server/sql/rteval-1.0.sql
> deleted file mode 100644
> index 107c90e..0000000
> --- a/server/sql/rteval-1.0.sql
> +++ /dev/null
> @@ -1,189 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- Create rteval database users
> ---
> -CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
> -CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
> -
> --- Create rteval database
> ---
> -CREATE DATABASE rteval ENCODING 'utf-8';
> -
> -\c rteval
> -
> --- Enable plpgsql.  It is expected that this PL/pgSQL is available.
> -CREATE LANGUAGE 'plpgsql';
> -
> --- FUNCTION: trgfnc_submqueue_notify
> --- Trigger function which is called on INSERT queries to the submissionqueue table.
> --- It will send a NOTIFY rteval_submq on INSERTs.
> ---
> -    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
> -    AS $BODY$
> -      DECLARE
> -      BEGIN
> -        NOTIFY rteval_submq;
> -        RETURN NEW;
> -      END
> -    $BODY$ LANGUAGE 'plpgsql';
> -
> -    -- The user(s) which are allowed to do INSERT on the submissionqueue
> -    -- must also be allowed to call this trigger function.
> -    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
> -
> --- TABLE: submissionqueue
> --- All XML-RPC clients registers their submissions into this table.  Another parser thread
> --- will pickup the records where parsestart IS NULL.
> ---
> -    CREATE TABLE submissionqueue (
> -           clientid   varchar(128) NOT NULL,
> -           filename   VARCHAR(1024) NOT NULL,
> -           status     INTEGER DEFAULT '0',
> -           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
> -           parsestart TIMESTAMP WITH TIME ZONE,
> -           parseend   TIMESTAMP WITH TIME ZONE,
> -           submid     SERIAL,
> -           PRIMARY KEY(submid)
> -    ) WITH OIDS;
> -    CREATE INDEX submissionq_status ON submissionqueue(status);
> -
> -    CREATE TRIGGER trg_submissionqueue AFTER INSERT
> -           ON submissionqueue FOR EACH STATEMENT
> -	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
> -
> -    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
> -    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
> -    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
> -
> --- TABLE: systems
> --- Overview table over all systems which have sent reports
> --- The dmidata column will keep the complete DMIdata available
> --- for further information about the system.
> ---
> -    CREATE TABLE systems (
> -        syskey        SERIAL NOT NULL,
> -        sysid         VARCHAR(64) NOT NULL,
> -        dmidata       xml NOT NULL,
> -        PRIMARY KEY(syskey)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON systems TO rtevparser;
> -    GRANT USAGE ON systems_syskey_seq TO rtevparser;
> -
> --- TABLE: systems_hostname
> --- This table is used to track the hostnames and IP addresses
> --- a registered system have used over time
> ---
> -   CREATE TABLE systems_hostname (
> -        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
> -        hostname      VARCHAR(256) NOT NULL,
> -        ipaddr        cidr      
> -    ) WITH OIDS;
> -    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
> -    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
> -    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
> -
> -    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
> -
> -
> --- TABLE: rtevalruns
> --- Overview over all rteval runs, when they were run and how long they ran.
> ---
> -    CREATE TABLE rtevalruns (
> -        rterid          SERIAL NOT NULL, -- RTEval Run Id
> -        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
> -        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
> -        kernel_ver      VARCHAR(32) NOT NULL,
> -        kernel_rt       BOOLEAN NOT NULL,
> -        arch            VARCHAR(12) NOT NULL,
> -        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
> -        run_duration    INTEGER NOT NULL,
> -        load_avg        REAL NOT NULL,
> -        version         VARCHAR(4), -- Version of rteval
> -        report_filename TEXT,
> -        PRIMARY KEY(rterid)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
> -    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
> -    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
> -
> --- TABLE rtevalruns_details
> --- More specific information on the rteval run.  The data is stored
> --- in XML for flexibility
> ---
> --- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
> --- /rteval/loads and /rteval/cyclictest/command_line
> ---
> -    CREATE TABLE rtevalruns_details (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        xmldata       xml NOT NULL,
> -        PRIMARY KEY(rterid)
> -    );
> -    GRANT INSERT ON rtevalruns_details TO rtevparser;
> -
> --- TABLE: cyclic_statistics
> --- This table keeps statistics overview over a particular rteval run
> ---
> -    CREATE TABLE cyclic_statistics (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        coreid        INTEGER, -- NULL=system
> -        priority      INTEGER, -- NULL=system
> -        num_samples   BIGINT NOT NULL,
> -        lat_min       REAL NOT NULL,
> -        lat_max       REAL NOT NULL,
> -        lat_mean      REAL NOT NULL,
> -        mode          REAL NOT NULL,
> -        range         REAL NOT NULL,
> -        median        REAL NOT NULL,
> -        stddev        REAL NOT NULL,
> -        cstid         SERIAL NOT NULL, -- unique record ID
> -        PRIMARY KEY(cstid)
> -    ) WITH OIDS;
> -    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
> -
> -    GRANT INSERT ON cyclic_statistics TO rtevparser;
> -    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
> -
> --- TABLE: cyclic_histogram
> --- This table keeps the raw histogram data for each rteval run being
> --- reported.
> ---
> -    CREATE TABLE cyclic_histogram (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        core          INTEGER, -- NULL=system
> -        index         INTEGER NOT NULL,
> -        value         BIGINT NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
> -
> -    GRANT INSERT ON cyclic_histogram TO rtevparser;
> -
> --- TABLE: cyclic_rawdata
> --- This table keeps the raw data for each rteval run being reported.
> --- Due to that it will be an enormous amount of data, we avoid using
> --- OID on this table.
> ---
> -    CREATE TABLE cyclic_rawdata (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        cpu_num       INTEGER NOT NULL,
> -        sampleseq     INTEGER NOT NULL,
> -        latency       REAL NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
> -
> -    GRANT INSERT ON cyclic_rawdata TO rtevparser;
> -
> --- TABLE: notes
> --- This table is purely to make notes, connected to different 
> --- records in the database
> ---
> -    CREATE TABLE notes (
> -        ntid          SERIAL NOT NULL,
> -        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
> -        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
> -        notes         TEXT NOT NULL,
> -        createdby     VARCHAR(48),
> -        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
> -        PRIMARY KEY(ntid)
> -    ) WITH OIDS;
> -    CREATE INDEX notes_refid ON notes(reftbl,refid);
> diff --git a/server/sql/rteval-1.1.sql b/server/sql/rteval-1.1.sql
> deleted file mode 100644
> index 6ec783f..0000000
> --- a/server/sql/rteval-1.1.sql
> +++ /dev/null
> @@ -1,203 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- Create rteval database users
> ---
> -CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
> -CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
> -
> --- Create rteval database
> ---
> -CREATE DATABASE rteval ENCODING 'utf-8';
> -
> -\c rteval
> -
> --- TABLE: rteval_info
> --- Contains information the current rteval XML-RPC and parser installation
> ---
> -    CREATE TABLE rteval_info (
> -       key    varchar(32) NOT NULL,
> -       value  TEXT NOT NULL,
> -       rtiid  SERIAL,
> -       PRIMARY KEY(rtiid)
> -    );
> -    GRANT SELECT ON rteval_info TO rtevaldb_parser;
> -    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.1');
> -
> --- Enable plpgsql.  It is expected that this PL/pgSQL is available.
> -    CREATE LANGUAGE 'plpgsql';
> -
> --- FUNCTION: trgfnc_submqueue_notify
> --- Trigger function which is called on INSERT queries to the submissionqueue table.
> --- It will send a NOTIFY rteval_submq on INSERTs.
> ---
> -    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
> -    AS $BODY$
> -      DECLARE
> -      BEGIN
> -        NOTIFY rteval_submq;
> -        RETURN NEW;
> -      END
> -    $BODY$ LANGUAGE 'plpgsql';
> -
> -    -- The user(s) which are allowed to do INSERT on the submissionqueue
> -    -- must also be allowed to call this trigger function.
> -    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
> -
> --- TABLE: submissionqueue
> --- All XML-RPC clients registers their submissions into this table.  Another parser thread
> --- will pickup the records where parsestart IS NULL.
> ---
> -    CREATE TABLE submissionqueue (
> -           clientid   varchar(128) NOT NULL,
> -           filename   VARCHAR(1024) NOT NULL,
> -           status     INTEGER DEFAULT '0',
> -           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
> -           parsestart TIMESTAMP WITH TIME ZONE,
> -           parseend   TIMESTAMP WITH TIME ZONE,
> -           submid     SERIAL,
> -           PRIMARY KEY(submid)
> -    ) WITH OIDS;
> -    CREATE INDEX submissionq_status ON submissionqueue(status);
> -
> -    CREATE TRIGGER trg_submissionqueue AFTER INSERT
> -           ON submissionqueue FOR EACH STATEMENT
> -	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
> -
> -    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
> -    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
> -    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
> -
> --- TABLE: systems
> --- Overview table over all systems which have sent reports
> --- The dmidata column will keep the complete DMIdata available
> --- for further information about the system.
> ---
> -    CREATE TABLE systems (
> -        syskey        SERIAL NOT NULL,
> -        sysid         VARCHAR(64) NOT NULL,
> -        dmidata       xml NOT NULL,
> -        PRIMARY KEY(syskey)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON systems TO rtevparser;
> -    GRANT USAGE ON systems_syskey_seq TO rtevparser;
> -
> --- TABLE: systems_hostname
> --- This table is used to track the hostnames and IP addresses
> --- a registered system have used over time
> ---
> -   CREATE TABLE systems_hostname (
> -        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
> -        hostname      VARCHAR(256) NOT NULL,
> -        ipaddr        cidr
> -    ) WITH OIDS;
> -    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
> -    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
> -    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
> -
> -    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
> -
> -
> --- TABLE: rtevalruns
> --- Overview over all rteval runs, when they were run and how long they ran.
> ---
> -    CREATE TABLE rtevalruns (
> -        rterid          SERIAL NOT NULL, -- RTEval Run Id
> -        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
> -        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
> -        kernel_ver      VARCHAR(32) NOT NULL,
> -        kernel_rt       BOOLEAN NOT NULL,
> -        arch            VARCHAR(12) NOT NULL,
> -        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
> -        run_duration    INTEGER NOT NULL,
> -        load_avg        REAL NOT NULL,
> -        version         VARCHAR(4), -- Version of rteval
> -        report_filename TEXT,
> -        PRIMARY KEY(rterid)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
> -    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
> -    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
> -
> --- TABLE rtevalruns_details
> --- More specific information on the rteval run.  The data is stored
> --- in XML for flexibility
> ---
> --- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
> --- /rteval/loads and /rteval/cyclictest/command_line
> ---
> -    CREATE TABLE rtevalruns_details (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        xmldata       xml NOT NULL,
> -        PRIMARY KEY(rterid)
> -    );
> -    GRANT INSERT ON rtevalruns_details TO rtevparser;
> -
> --- TABLE: cyclic_statistics
> --- This table keeps statistics overview over a particular rteval run
> ---
> -    CREATE TABLE cyclic_statistics (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        coreid        INTEGER, -- NULL=system
> -        priority      INTEGER, -- NULL=system
> -        num_samples   BIGINT NOT NULL,
> -        lat_min       REAL NOT NULL,
> -        lat_max       REAL NOT NULL,
> -        lat_mean      REAL NOT NULL,
> -        mode          REAL NOT NULL,
> -        range         REAL NOT NULL,
> -        median        REAL NOT NULL,
> -        stddev        REAL NOT NULL,
> -	mean_abs_dev  REAL NOT NULL,
> -	variance      REAL NOT NULL,
> -        cstid         SERIAL NOT NULL, -- unique record ID
> -        PRIMARY KEY(cstid)
> -    ) WITH OIDS;
> -    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
> -
> -    GRANT INSERT ON cyclic_statistics TO rtevparser;
> -    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
> -
> --- TABLE: cyclic_histogram
> --- This table keeps the raw histogram data for each rteval run being
> --- reported.
> ---
> -    CREATE TABLE cyclic_histogram (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        core          INTEGER, -- NULL=system
> -        index         INTEGER NOT NULL,
> -        value         BIGINT NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
> -
> -    GRANT INSERT ON cyclic_histogram TO rtevparser;
> -
> --- TABLE: cyclic_rawdata
> --- This table keeps the raw data for each rteval run being reported.
> --- Due to that it will be an enormous amount of data, we avoid using
> --- OID on this table.
> ---
> -    CREATE TABLE cyclic_rawdata (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        cpu_num       INTEGER NOT NULL,
> -        sampleseq     INTEGER NOT NULL,
> -        latency       REAL NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
> -
> -    GRANT INSERT ON cyclic_rawdata TO rtevparser;
> -
> --- TABLE: notes
> --- This table is purely to make notes, connected to different
> --- records in the database
> ---
> -    CREATE TABLE notes (
> -        ntid          SERIAL NOT NULL,
> -        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
> -        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
> -        notes         TEXT NOT NULL,
> -        createdby     VARCHAR(48),
> -        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
> -        PRIMARY KEY(ntid)
> -    ) WITH OIDS;
> -    CREATE INDEX notes_refid ON notes(reftbl,refid);
> diff --git a/server/sql/rteval-1.2.sql b/server/sql/rteval-1.2.sql
> deleted file mode 100644
> index 4a37eb6..0000000
> --- a/server/sql/rteval-1.2.sql
> +++ /dev/null
> @@ -1,207 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- Create rteval database users
> ---
> -CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
> -CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
> -
> --- Create rteval database
> ---
> -CREATE DATABASE rteval ENCODING 'utf-8';
> -
> -\c rteval
> -
> --- TABLE: rteval_info
> --- Contains information the current rteval XML-RPC and parser installation
> ---
> -    CREATE TABLE rteval_info (
> -       key    varchar(32) NOT NULL,
> -       value  TEXT NOT NULL,
> -       rtiid  SERIAL,
> -       PRIMARY KEY(rtiid)
> -    );
> -    GRANT SELECT ON rteval_info TO rtevparser;
> -    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.2');
> -
> --- Enable plpgsql.  It is expected that this PL/pgSQL is available.
> -    CREATE LANGUAGE 'plpgsql';
> -
> --- FUNCTION: trgfnc_submqueue_notify
> --- Trigger function which is called on INSERT queries to the submissionqueue table.
> --- It will send a NOTIFY rteval_submq on INSERTs.
> ---
> -    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
> -    AS $BODY$
> -      DECLARE
> -      BEGIN
> -        NOTIFY rteval_submq;
> -        RETURN NEW;
> -      END
> -    $BODY$ LANGUAGE 'plpgsql';
> -
> -    -- The user(s) which are allowed to do INSERT on the submissionqueue
> -    -- must also be allowed to call this trigger function.
> -    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
> -
> --- TABLE: submissionqueue
> --- All XML-RPC clients registers their submissions into this table.  Another parser thread
> --- will pickup the records where parsestart IS NULL.
> ---
> -    CREATE TABLE submissionqueue (
> -           clientid   varchar(128) NOT NULL,
> -           filename   VARCHAR(1024) NOT NULL,
> -           status     INTEGER DEFAULT '0',
> -           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
> -           parsestart TIMESTAMP WITH TIME ZONE,
> -           parseend   TIMESTAMP WITH TIME ZONE,
> -           submid     SERIAL,
> -           PRIMARY KEY(submid)
> -    ) WITH OIDS;
> -    CREATE INDEX submissionq_status ON submissionqueue(status);
> -
> -    CREATE TRIGGER trg_submissionqueue AFTER INSERT
> -           ON submissionqueue FOR EACH STATEMENT
> -	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
> -
> -    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
> -    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
> -    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
> -
> --- TABLE: systems
> --- Overview table over all systems which have sent reports
> --- The dmidata column will keep the complete DMIdata available
> --- for further information about the system.
> ---
> -    CREATE TABLE systems (
> -        syskey        SERIAL NOT NULL,
> -        sysid         VARCHAR(64) NOT NULL,
> -        dmidata       xml NOT NULL,
> -        PRIMARY KEY(syskey)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON systems TO rtevparser;
> -    GRANT USAGE ON systems_syskey_seq TO rtevparser;
> -
> --- TABLE: systems_hostname
> --- This table is used to track the hostnames and IP addresses
> --- a registered system have used over time
> ---
> -   CREATE TABLE systems_hostname (
> -        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
> -        hostname      VARCHAR(256) NOT NULL,
> -        ipaddr        cidr
> -    ) WITH OIDS;
> -    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
> -    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
> -    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
> -
> -    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
> -
> -
> --- TABLE: rtevalruns
> --- Overview over all rteval runs, when they were run and how long they ran.
> ---
> -    CREATE TABLE rtevalruns (
> -        rterid          SERIAL NOT NULL, -- RTEval Run Id
> -        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
> -        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
> -        kernel_ver      VARCHAR(32) NOT NULL,
> -        kernel_rt       BOOLEAN NOT NULL,
> -        arch            VARCHAR(12) NOT NULL,
> -	distro		VARCHAR(64),
> -        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
> -        run_duration    INTEGER NOT NULL,
> -        load_avg        REAL NOT NULL,
> -        version         VARCHAR(4), -- Version of rteval
> -        report_filename TEXT,
> -        PRIMARY KEY(rterid)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
> -    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
> -    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
> -
> --- TABLE rtevalruns_details
> --- More specific information on the rteval run.  The data is stored
> --- in XML for flexibility
> ---
> --- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
> --- /rteval/loads and /rteval/cyclictest/command_line
> ---
> -    CREATE TABLE rtevalruns_details (
> -        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        num_cpu_cores   INTEGER,
> -        num_cpu_sockets INTEGER,
> -        numa_nodes      INTEGER,
> -        xmldata         xml NOT NULL,
> -        PRIMARY KEY(rterid)
> -    );
> -    GRANT INSERT ON rtevalruns_details TO rtevparser;
> -
> --- TABLE: cyclic_statistics
> --- This table keeps statistics overview over a particular rteval run
> ---
> -    CREATE TABLE cyclic_statistics (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        coreid        INTEGER, -- NULL=system
> -        priority      INTEGER, -- NULL=system
> -        num_samples   BIGINT NOT NULL,
> -        lat_min       REAL NOT NULL,
> -        lat_max       REAL NOT NULL,
> -        lat_mean      REAL NOT NULL,
> -        mode          REAL NOT NULL,
> -        range         REAL NOT NULL,
> -        median        REAL NOT NULL,
> -        stddev        REAL NOT NULL,
> -	mean_abs_dev  REAL NOT NULL,
> -	variance      REAL NOT NULL,
> -        cstid         SERIAL NOT NULL, -- unique record ID
> -        PRIMARY KEY(cstid)
> -    ) WITH OIDS;
> -    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
> -
> -    GRANT INSERT ON cyclic_statistics TO rtevparser;
> -    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
> -
> --- TABLE: cyclic_histogram
> --- This table keeps the raw histogram data for each rteval run being
> --- reported.
> ---
> -    CREATE TABLE cyclic_histogram (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        core          INTEGER, -- NULL=system
> -        index         INTEGER NOT NULL,
> -        value         BIGINT NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
> -
> -    GRANT INSERT ON cyclic_histogram TO rtevparser;
> -
> --- TABLE: cyclic_rawdata
> --- This table keeps the raw data for each rteval run being reported.
> --- Due to that it will be an enormous amount of data, we avoid using
> --- OID on this table.
> ---
> -    CREATE TABLE cyclic_rawdata (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        cpu_num       INTEGER NOT NULL,
> -        sampleseq     INTEGER NOT NULL,
> -        latency       REAL NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
> -
> -    GRANT INSERT ON cyclic_rawdata TO rtevparser;
> -
> --- TABLE: notes
> --- This table is purely to make notes, connected to different
> --- records in the database
> ---
> -    CREATE TABLE notes (
> -        ntid          SERIAL NOT NULL,
> -        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
> -        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
> -        notes         TEXT NOT NULL,
> -        createdby     VARCHAR(48),
> -        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
> -        PRIMARY KEY(ntid)
> -    ) WITH OIDS;
> -    CREATE INDEX notes_refid ON notes(reftbl,refid);
> diff --git a/server/sql/rteval-1.3.sql b/server/sql/rteval-1.3.sql
> deleted file mode 100644
> index ca7837b..0000000
> --- a/server/sql/rteval-1.3.sql
> +++ /dev/null
> @@ -1,208 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- Create rteval database users
> ---
> -CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
> -CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
> -
> --- Create rteval database
> ---
> -CREATE DATABASE rteval ENCODING 'utf-8';
> -
> -\c rteval
> -
> --- TABLE: rteval_info
> --- Contains information the current rteval XML-RPC and parser installation
> ---
> -    CREATE TABLE rteval_info (
> -       key    varchar(32) NOT NULL,
> -       value  TEXT NOT NULL,
> -       rtiid  SERIAL,
> -       PRIMARY KEY(rtiid)
> -    );
> -    GRANT SELECT ON rteval_info TO rtevparser;
> -    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.3');
> -
> --- Enable plpgsql.  It is expected that this PL/pgSQL is available.
> -    CREATE LANGUAGE 'plpgsql';
> -
> --- FUNCTION: trgfnc_submqueue_notify
> --- Trigger function which is called on INSERT queries to the submissionqueue table.
> --- It will send a NOTIFY rteval_submq on INSERTs.
> ---
> -    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
> -    AS $BODY$
> -      DECLARE
> -      BEGIN
> -        NOTIFY rteval_submq;
> -        RETURN NEW;
> -      END
> -    $BODY$ LANGUAGE 'plpgsql';
> -
> -    -- The user(s) which are allowed to do INSERT on the submissionqueue
> -    -- must also be allowed to call this trigger function.
> -    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
> -
> --- TABLE: submissionqueue
> --- All XML-RPC clients registers their submissions into this table.  Another parser thread
> --- will pickup the records where parsestart IS NULL.
> ---
> -    CREATE TABLE submissionqueue (
> -           clientid   varchar(128) NOT NULL,
> -           filename   VARCHAR(1024) NOT NULL,
> -           status     INTEGER DEFAULT '0',
> -           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
> -           parsestart TIMESTAMP WITH TIME ZONE,
> -           parseend   TIMESTAMP WITH TIME ZONE,
> -           submid     SERIAL,
> -           PRIMARY KEY(submid)
> -    ) WITH OIDS;
> -    CREATE INDEX submissionq_status ON submissionqueue(status);
> -
> -    CREATE TRIGGER trg_submissionqueue AFTER INSERT
> -           ON submissionqueue FOR EACH STATEMENT
> -	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
> -
> -    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
> -    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
> -    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
> -
> --- TABLE: systems
> --- Overview table over all systems which have sent reports
> --- The dmidata column will keep the complete DMIdata available
> --- for further information about the system.
> ---
> -    CREATE TABLE systems (
> -        syskey        SERIAL NOT NULL,
> -        sysid         VARCHAR(64) NOT NULL,
> -        dmidata       xml NOT NULL,
> -        PRIMARY KEY(syskey)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON systems TO rtevparser;
> -    GRANT USAGE ON systems_syskey_seq TO rtevparser;
> -
> --- TABLE: systems_hostname
> --- This table is used to track the hostnames and IP addresses
> --- a registered system have used over time
> ---
> -   CREATE TABLE systems_hostname (
> -        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
> -        hostname      VARCHAR(256) NOT NULL,
> -        ipaddr        cidr
> -    ) WITH OIDS;
> -    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
> -    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
> -    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
> -
> -    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
> -
> -
> --- TABLE: rtevalruns
> --- Overview over all rteval runs, when they were run and how long they ran.
> ---
> -    CREATE TABLE rtevalruns (
> -        rterid          SERIAL NOT NULL, -- RTEval Run Id
> -        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
> -        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
> -        kernel_ver      VARCHAR(32) NOT NULL,
> -        kernel_rt       BOOLEAN NOT NULL,
> -        arch            VARCHAR(12) NOT NULL,
> -	distro		VARCHAR(64),
> -        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
> -        run_duration    INTEGER NOT NULL,
> -        load_avg        REAL NOT NULL,
> -        version         VARCHAR(4), -- Version of rteval
> -        report_filename TEXT,
> -        PRIMARY KEY(rterid)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
> -    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
> -    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
> -
> --- TABLE rtevalruns_details
> --- More specific information on the rteval run.  The data is stored
> --- in XML for flexibility
> ---
> --- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
> --- /rteval/loads and /rteval/cyclictest/command_line
> ---
> -    CREATE TABLE rtevalruns_details (
> -        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        annotation      TEXT,
> -        num_cpu_cores   INTEGER,
> -        num_cpu_sockets INTEGER,
> -        numa_nodes      INTEGER,
> -        xmldata         xml NOT NULL,
> -        PRIMARY KEY(rterid)
> -    );
> -    GRANT INSERT ON rtevalruns_details TO rtevparser;
> -
> --- TABLE: cyclic_statistics
> --- This table keeps statistics overview over a particular rteval run
> ---
> -    CREATE TABLE cyclic_statistics (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        coreid        INTEGER, -- NULL=system
> -        priority      INTEGER, -- NULL=system
> -        num_samples   BIGINT NOT NULL,
> -        lat_min       REAL NOT NULL,
> -        lat_max       REAL NOT NULL,
> -        lat_mean      REAL NOT NULL,
> -        mode          REAL NOT NULL,
> -        range         REAL NOT NULL,
> -        median        REAL NOT NULL,
> -        stddev        REAL NOT NULL,
> -	mean_abs_dev  REAL NOT NULL,
> -	variance      REAL NOT NULL,
> -        cstid         SERIAL NOT NULL, -- unique record ID
> -        PRIMARY KEY(cstid)
> -    ) WITH OIDS;
> -    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
> -
> -    GRANT INSERT ON cyclic_statistics TO rtevparser;
> -    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
> -
> --- TABLE: cyclic_histogram
> --- This table keeps the raw histogram data for each rteval run being
> --- reported.
> ---
> -    CREATE TABLE cyclic_histogram (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        core          INTEGER, -- NULL=system
> -        index         INTEGER NOT NULL,
> -        value         BIGINT NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
> -
> -    GRANT INSERT ON cyclic_histogram TO rtevparser;
> -
> --- TABLE: cyclic_rawdata
> --- This table keeps the raw data for each rteval run being reported.
> --- Due to that it will be an enormous amount of data, we avoid using
> --- OID on this table.
> ---
> -    CREATE TABLE cyclic_rawdata (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        cpu_num       INTEGER NOT NULL,
> -        sampleseq     INTEGER NOT NULL,
> -        latency       REAL NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
> -
> -    GRANT INSERT ON cyclic_rawdata TO rtevparser;
> -
> --- TABLE: notes
> --- This table is purely to make notes, connected to different
> --- records in the database
> ---
> -    CREATE TABLE notes (
> -        ntid          SERIAL NOT NULL,
> -        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
> -        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
> -        notes         TEXT NOT NULL,
> -        createdby     VARCHAR(48),
> -        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
> -        PRIMARY KEY(ntid)
> -    ) WITH OIDS;
> -    CREATE INDEX notes_refid ON notes(reftbl,refid);
> diff --git a/server/sql/rteval-1.4.sql b/server/sql/rteval-1.4.sql
> deleted file mode 100644
> index 6d3efdd..0000000
> --- a/server/sql/rteval-1.4.sql
> +++ /dev/null
> @@ -1,209 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- Create rteval database users
> ---
> -CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
> -CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
> -
> --- Create rteval database
> ---
> -CREATE DATABASE rteval ENCODING 'utf-8';
> -
> -\c rteval
> -
> --- TABLE: rteval_info
> --- Contains information the current rteval XML-RPC and parser installation
> ---
> -    CREATE TABLE rteval_info (
> -       key    varchar(32) NOT NULL,
> -       value  TEXT NOT NULL,
> -       rtiid  SERIAL,
> -       PRIMARY KEY(rtiid)
> -    );
> -    GRANT SELECT ON rteval_info TO rtevparser;
> -    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.4');
> -
> --- Enable plpgsql.  It is expected that this PL/pgSQL is available.
> -    CREATE LANGUAGE 'plpgsql';
> -
> --- FUNCTION: trgfnc_submqueue_notify
> --- Trigger function which is called on INSERT queries to the submissionqueue table.
> --- It will send a NOTIFY rteval_submq on INSERTs.
> ---
> -    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
> -    AS $BODY$
> -      DECLARE
> -      BEGIN
> -        NOTIFY rteval_submq;
> -        RETURN NEW;
> -      END
> -    $BODY$ LANGUAGE 'plpgsql';
> -
> -    -- The user(s) which are allowed to do INSERT on the submissionqueue
> -    -- must also be allowed to call this trigger function.
> -    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
> -
> --- TABLE: submissionqueue
> --- All XML-RPC clients registers their submissions into this table.  Another parser thread
> --- will pickup the records where parsestart IS NULL.
> ---
> -    CREATE TABLE submissionqueue (
> -           clientid   varchar(128) NOT NULL,
> -           filename   VARCHAR(1024) NOT NULL,
> -           status     INTEGER DEFAULT '0',
> -           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
> -           parsestart TIMESTAMP WITH TIME ZONE,
> -           parseend   TIMESTAMP WITH TIME ZONE,
> -           submid     SERIAL,
> -           PRIMARY KEY(submid)
> -    ) WITH OIDS;
> -    CREATE INDEX submissionq_status ON submissionqueue(status);
> -
> -    CREATE TRIGGER trg_submissionqueue AFTER INSERT
> -           ON submissionqueue FOR EACH STATEMENT
> -	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
> -
> -    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
> -    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
> -    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
> -
> --- TABLE: systems
> --- Overview table over all systems which have sent reports
> --- The dmidata column will keep the complete DMIdata available
> --- for further information about the system.
> ---
> -    CREATE TABLE systems (
> -        syskey        SERIAL NOT NULL,
> -        sysid         VARCHAR(64) NOT NULL,
> -        dmidata       xml NOT NULL,
> -        PRIMARY KEY(syskey)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON systems TO rtevparser;
> -    GRANT USAGE ON systems_syskey_seq TO rtevparser;
> -
> --- TABLE: systems_hostname
> --- This table is used to track the hostnames and IP addresses
> --- a registered system have used over time
> ---
> -   CREATE TABLE systems_hostname (
> -        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
> -        hostname      VARCHAR(256) NOT NULL,
> -        ipaddr        cidr
> -    ) WITH OIDS;
> -    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
> -    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
> -    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
> -
> -    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
> -
> -
> --- TABLE: rtevalruns
> --- Overview over all rteval runs, when they were run and how long they ran.
> ---
> -    CREATE TABLE rtevalruns (
> -        rterid          SERIAL NOT NULL, -- RTEval Run Id
> -        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
> -        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
> -        kernel_ver      VARCHAR(32) NOT NULL,
> -        kernel_rt       BOOLEAN NOT NULL,
> -        arch            VARCHAR(12) NOT NULL,
> -	distro		VARCHAR(64),
> -        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
> -        run_duration    INTEGER NOT NULL,
> -        load_avg        REAL NOT NULL,
> -        version         VARCHAR(4), -- Version of rteval
> -        report_filename TEXT,
> -        PRIMARY KEY(rterid)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
> -    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
> -    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
> -
> --- TABLE rtevalruns_details
> --- More specific information on the rteval run.  The data is stored
> --- in XML for flexibility
> ---
> --- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
> --- /rteval/loads and /rteval/cyclictest/command_line
> ---
> -    CREATE TABLE rtevalruns_details (
> -        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        annotation      TEXT,
> -        num_cpu_cores   INTEGER,
> -        num_cpu_sockets INTEGER,
> -        cpu_core_spread INTEGER[],
> -        numa_nodes      INTEGER,
> -        xmldata         xml NOT NULL,
> -        PRIMARY KEY(rterid)
> -    );
> -    GRANT INSERT ON rtevalruns_details TO rtevparser;
> -
> --- TABLE: cyclic_statistics
> --- This table keeps statistics overview over a particular rteval run
> ---
> -    CREATE TABLE cyclic_statistics (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        coreid        INTEGER, -- NULL=system
> -        priority      INTEGER, -- NULL=system
> -        num_samples   BIGINT NOT NULL,
> -        lat_min       REAL NOT NULL,
> -        lat_max       REAL NOT NULL,
> -        lat_mean      REAL NOT NULL,
> -        mode          REAL NOT NULL,
> -        range         REAL NOT NULL,
> -        median        REAL NOT NULL,
> -        stddev        REAL NOT NULL,
> -	mean_abs_dev  REAL NOT NULL,
> -	variance      REAL NOT NULL,
> -        cstid         SERIAL NOT NULL, -- unique record ID
> -        PRIMARY KEY(cstid)
> -    ) WITH OIDS;
> -    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
> -
> -    GRANT INSERT ON cyclic_statistics TO rtevparser;
> -    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
> -
> --- TABLE: cyclic_histogram
> --- This table keeps the raw histogram data for each rteval run being
> --- reported.
> ---
> -    CREATE TABLE cyclic_histogram (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        core          INTEGER, -- NULL=system
> -        index         INTEGER NOT NULL,
> -        value         BIGINT NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
> -
> -    GRANT INSERT ON cyclic_histogram TO rtevparser;
> -
> --- TABLE: cyclic_rawdata
> --- This table keeps the raw data for each rteval run being reported.
> --- Due to that it will be an enormous amount of data, we avoid using
> --- OID on this table.
> ---
> -    CREATE TABLE cyclic_rawdata (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        cpu_num       INTEGER NOT NULL,
> -        sampleseq     INTEGER NOT NULL,
> -        latency       REAL NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
> -
> -    GRANT INSERT ON cyclic_rawdata TO rtevparser;
> -
> --- TABLE: notes
> --- This table is purely to make notes, connected to different
> --- records in the database
> ---
> -    CREATE TABLE notes (
> -        ntid          SERIAL NOT NULL,
> -        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
> -        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
> -        notes         TEXT NOT NULL,
> -        createdby     VARCHAR(48),
> -        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
> -        PRIMARY KEY(ntid)
> -    ) WITH OIDS;
> -    CREATE INDEX notes_refid ON notes(reftbl,refid);
> diff --git a/server/sql/rteval-1.5.sql b/server/sql/rteval-1.5.sql
> deleted file mode 100644
> index 68e0fcc..0000000
> --- a/server/sql/rteval-1.5.sql
> +++ /dev/null
> @@ -1,235 +0,0 @@
> --- SPDX-License-Identifier: GPL-2.0-or-later
> --- Create rteval database users
> ---
> -CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
> -CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
> -
> --- Create rteval database
> ---
> -CREATE DATABASE rteval ENCODING 'utf-8';
> -
> -\c rteval
> -
> --- TABLE: rteval_info
> --- Contains information the current rteval XML-RPC and parser installation
> ---
> -    CREATE TABLE rteval_info (
> -       key    varchar(32) NOT NULL,
> -       value  TEXT NOT NULL,
> -       rtiid  SERIAL,
> -       PRIMARY KEY(rtiid)
> -    );
> -    GRANT SELECT ON rteval_info TO rtevparser;
> -    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.5');
> -
> --- Enable plpgsql.  It is expected that this PL/pgSQL is available.
> -    CREATE LANGUAGE 'plpgsql';
> -
> --- FUNCTION: trgfnc_submqueue_notify
> --- Trigger function which is called on INSERT queries to the submissionqueue table.
> --- It will send a NOTIFY rteval_submq on INSERTs.
> ---
> -    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
> -    AS $BODY$
> -      DECLARE
> -      BEGIN
> -        NOTIFY rteval_submq;
> -        RETURN NEW;
> -      END
> -    $BODY$ LANGUAGE 'plpgsql';
> -
> -    -- The user(s) which are allowed to do INSERT on the submissionqueue
> -    -- must also be allowed to call this trigger function.
> -    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
> -
> --- TABLE: submissionqueue
> --- All XML-RPC clients registers their submissions into this table.  Another parser thread
> --- will pickup the records where parsestart IS NULL.
> ---
> -    CREATE TABLE submissionqueue (
> -           clientid   varchar(128) NOT NULL,
> -           filename   VARCHAR(1024) NOT NULL,
> -           status     INTEGER DEFAULT '0',
> -           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
> -           parsestart TIMESTAMP WITH TIME ZONE,
> -           parseend   TIMESTAMP WITH TIME ZONE,
> -           submid     SERIAL,
> -           PRIMARY KEY(submid)
> -    ) WITH OIDS;
> -    CREATE INDEX submissionq_status ON submissionqueue(status);
> -
> -    CREATE TRIGGER trg_submissionqueue AFTER INSERT
> -           ON submissionqueue FOR EACH STATEMENT
> -	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
> -
> -    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
> -    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
> -    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
> -
> --- TABLE: systems
> --- Overview table over all systems which have sent reports
> --- The dmidata column will keep the complete DMIdata available
> --- for further information about the system.
> ---
> -    CREATE TABLE systems (
> -        syskey        SERIAL NOT NULL,
> -        sysid         VARCHAR(64) NOT NULL,
> -        dmidata       xml NOT NULL,
> -        PRIMARY KEY(syskey)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON systems TO rtevparser;
> -    GRANT USAGE ON systems_syskey_seq TO rtevparser;
> -
> --- TABLE: systems_hostname
> --- This table is used to track the hostnames and IP addresses
> --- a registered system have used over time
> ---
> -   CREATE TABLE systems_hostname (
> -        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
> -        hostname      VARCHAR(256) NOT NULL,
> -        ipaddr        cidr
> -    ) WITH OIDS;
> -    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
> -    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
> -    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
> -
> -    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
> -
> -
> --- TABLE: rtevalruns
> --- Overview over all rteval runs, when they were run and how long they ran.
> ---
> -    CREATE TABLE rtevalruns (
> -        rterid          SERIAL NOT NULL, -- RTEval Run Id
> -        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
> -        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
> -        kernel_ver      VARCHAR(32) NOT NULL,
> -        kernel_rt       BOOLEAN NOT NULL,
> -        arch            VARCHAR(12) NOT NULL,
> -	distro		VARCHAR(64),
> -        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
> -        run_duration    INTEGER NOT NULL,
> -        load_avg        REAL NOT NULL,
> -        version         VARCHAR(4), -- Version of rteval
> -        report_filename TEXT,
> -        PRIMARY KEY(rterid)
> -    ) WITH OIDS;
> -
> -    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
> -    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
> -    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
> -
> --- TABLE rtevalruns_details
> --- More specific information on the rteval run.  The data is stored
> --- in XML for flexibility
> ---
> --- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
> --- /rteval/loads and /rteval/cyclictest/command_line
> ---
> -    CREATE TABLE rtevalruns_details (
> -        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        annotation      TEXT,
> -        num_cpu_cores   INTEGER,
> -        num_cpu_sockets INTEGER,
> -        cpu_core_spread INTEGER[],
> -        numa_nodes      INTEGER,
> -        xmldata         xml NOT NULL,
> -        PRIMARY KEY(rterid)
> -    );
> -    GRANT INSERT ON rtevalruns_details TO rtevparser;
> -
> --- TABLE: cyclic_statistics
> --- This table keeps statistics overview over a particular rteval run
> ---
> -    CREATE TABLE cyclic_statistics (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        coreid        INTEGER, -- NULL=system
> -        priority      INTEGER, -- NULL=system
> -        num_samples   BIGINT NOT NULL,
> -        lat_min       REAL NOT NULL,
> -        lat_max       REAL NOT NULL,
> -        lat_mean      REAL NOT NULL,
> -        mode          REAL NOT NULL,
> -        range         REAL NOT NULL,
> -        median        REAL NOT NULL,
> -        stddev        REAL NOT NULL,
> -	mean_abs_dev  REAL NOT NULL,
> -	variance      REAL NOT NULL,
> -        cstid         SERIAL NOT NULL, -- unique record ID
> -        PRIMARY KEY(cstid)
> -    ) WITH OIDS;
> -    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
> -
> -    GRANT INSERT ON cyclic_statistics TO rtevparser;
> -    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
> -
> --- TABLE: cyclic_histogram
> --- This table keeps the raw histogram data for each rteval run being
> --- reported.
> ---
> -    CREATE TABLE cyclic_histogram (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        core          INTEGER, -- NULL=system
> -        index         INTEGER NOT NULL,
> -        value         BIGINT NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
> -
> -    GRANT INSERT ON cyclic_histogram TO rtevparser;
> -
> --- TABLE: cyclic_rawdata
> --- This table keeps the raw data for each rteval run being reported.
> --- Due to that it will be an enormous amount of data, we avoid using
> --- OID on this table.
> ---
> -    CREATE TABLE cyclic_rawdata (
> -        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -        cpu_num       INTEGER NOT NULL,
> -        sampleseq     INTEGER NOT NULL,
> -        latency       REAL NOT NULL
> -    ) WITHOUT OIDS;
> -    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
> -
> -    GRANT INSERT ON cyclic_rawdata TO rtevparser;
> -
> --- TABLE: hwlatdetect_summary
> --- Tracks hwlatdetect results for a particular hardware
> ---
> -   CREATE TABLE hwlatdetect_summary (
> -       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -       duration       INTEGER NOT NULL,
> -       threshold      INTEGER NOT NULL,
> -       timewindow     INTEGER NOT NULL,
> -       width          INTEGER NOT NULL,
> -       samplecount    INTEGER NOT NULL,
> -       hwlat_min      REAL NOT NULL,
> -       hwlat_avg      REAL NOT NULL,
> -       hwlat_max      REAL NOT NULL
> -   ) WITHOUT OIDS;
> -   GRANT SELECT, INSERT ON hwlatdetect_summary TO rtevparser;
> -
> --- TABLE: hwlatdetect_samples
> --- Contains the hwlatdetect sample records from a particular run
> ---
> -   CREATE TABLE hwlatdetect_samples (
> -       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
> -       timestamp      NUMERIC(20,10) NOT NULL,
> -       latency        REAL NOT NULL
> -   ) WITHOUT OIDS;
> -   GRANT SELECT, INSERT ON hwlatdetect_samples TO rtevparser;
> -
> --- TABLE: notes
> --- This table is purely to make notes, connected to different
> --- records in the database
> ---
> -    CREATE TABLE notes (
> -        ntid          SERIAL NOT NULL,
> -        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
> -        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
> -        notes         TEXT NOT NULL,
> -        createdby     VARCHAR(48),
> -        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
> -        PRIMARY KEY(ntid)
> -    ) WITH OIDS;
> -    CREATE INDEX notes_refid ON notes(reftbl,refid);
> diff --git a/server/testclient.py b/server/testclient.py
> deleted file mode 100644
> index dc9745b..0000000
> --- a/server/testclient.py
> +++ /dev/null
> @@ -1,37 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   testclient.py
> -#   XML-RPC test client for testing the supported XML-RPC API 
> -#   in the rteval server.
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import sys
> -import libxml2
> -import io
> -
> -sys.path.append('../rteval')
> -import rtevalclient
> -
> -print("** Creating doc")
> -d = libxml2.newDoc("1.0")
> -n = libxml2.newNode('TestNode1')
> -d.setRootElement(n)
> -n2 = n.newTextChild(None, 'TestNode2','Just a little test')
> -n2.newProp('test','true')
> -
> -for i in range(1,5):
> -    n2 = n.newTextChild(None, 'TestNode3', 'Test line %i' %i)
> -
> -print("** Doc to be sent")
> -d.saveFormatFileEnc('-','UTF-8', 1)
> -
> -
> -print("** Testing API")
> -client = rtevalclient.rtevalclient("http://localhost:65432/rteval/API1/")
> -
> -print("** 1: Hello(): %s" % str(client.Hello()))
> -status = client.SendReport(d)
> -print("** 2: SendReport(xmlDoc): %s" % str(status))
> -
> diff --git a/server/testclient_sendreportfile b/server/testclient_sendreportfile
> deleted file mode 100755
> index 5d3ed74..0000000
> --- a/server/testclient_sendreportfile
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -#!/usr/bin/python3 -tt
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   testclient_sendfile.py
> -#   XML-RPC test client which just sends an XML file to the given rteval server
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import sys
> -import libxml2
> -from argparse import ArgumentParser
> -
> -sys.path.append('../rteval')
> -import rtevalclient
> -
> -if __name__ == '__main__':
> -    parser = ArgumentParser(version="%prog v0.1")
> -
> -    parser.add_argument("-r", "--report", action="store", dest="report", default="summary.xml",
> -                      help="Which XML report to send to the XML-RPC server  (default: %default)",
> -                      metavar="FILE")
> -    parser.add_argument("-X", "--xmlrpc-submit", dest="xmlrpchost", default="localhost:65432",
> -                      help="Hostname to the XML-RPC server to send the data (default: %default)",
> -                      metavar="HOST[:PORT]")
> -
> -    opts = parser.parse_args()
> -
> -    d = libxml2.parseFile(opts.report)
> -
> -    client = rtevalclient.rtevalclient("http://%s/rteval/API1/" % opts.xmlrpchost)
> -
> -    status = client.SendReport(d)
> -    print "SendReport(xmlDoc): %s" % status
> -else:
> -    raise Exception, "This is a standalone program, not a module to be imported"
> diff --git a/server/unittest.py b/server/unittest.py
> deleted file mode 100644
> index 73cee9d..0000000
> --- a/server/unittest.py
> +++ /dev/null
> @@ -1,91 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -import sys, threading, time, signal, libxml2
> -import argparse
> -from rteval_testserver import RTevald
> -from Logger import Logger
> -
> -sys.path.insert(0,'..')
> -sys.path.insert(0,'../rteval')
> -sys.path.insert(0,'rteval')
> -import rtevalclient
> -
> -class ServerThread(threading.Thread):
> -    def __init__(self, port):
> -        threading.Thread.__init__(self)
> -        self.port = port
> -        self.log = Logger('unit-test-server.log','rteval-xmlrpc-testsrv')
> -
> -        parser = argparse.ArgumentParser()
> -        parser.add_argument("-L", "--listen", action="store", dest="listen", default="127.0.0.1",
> -                          help="Which interface to listen to [default: %default]", metavar="IPADDR")
> -        parser.add_argument("-P", "--port", action="store", type="int", dest="port", default=self.port,
> -                          help="Which port to listen to [default: %default]",  metavar="PORT")
> -
> -        (options, args) = parser.parse_args()
> -
> -        self.child = RTevald(options, self.log)
> -
> -    def run(self):
> -        self.child.StartServer()
> -
> -    def stop(self):
> -        self.child.StopServer()
> -
> -    def sigcatch(self, signum, frame):
> -        print("Shutting down")
> -        self.stop()
> -
> -
> -class ClientTest(object):
> -    def __init__(self, port):
> -        self.client = rtevalclient.rtevalclient("http://localhost:%s/rteval/API1/" % port)
> -
> -    def __prepare_data(self):
> -        d = libxml2.newDoc("1.0")
> -        n = libxml2.newNode('TestNode1')
> -        d.setRootElement(n)
> -        n2 = n.newTextChild(None, 'TestNode2','Just a little test')
> -        n2.newProp('test','true')
> -        for i in range(1,5):
> -            n2 = n.newTextChild(None, 'TestNode3', 'Test line %i' %i)
> -        self.testdoc = d
> -
> -    def RunTest(self):
> -        try:
> -            print("** Creating XML test document")
> -            self.__prepare_data()
> -            self.testdoc.saveFormatFileEnc('-','UTF-8', 1)
> -
> -            print("** Client test [1]: Hello(): %s" % str(self.client.Hello()))
> -            status = self.client.SendReport(self.testdoc)
> -            print("** Client test [2]; SendReport(xmlDoc): %s" % str(status))
> -        except Exception as e:
> -            raise Exception("XML-RPC client test failed: %s" % str(e))
> -
> -
> -def unit_test(rootdir):
> -    ret = 1
> -    try:
> -        # Prepare server and client objects
> -        srvthread = ServerThread('65432')
> -        clienttest = ClientTest('65432')
> -        signal.signal(signal.SIGINT, srvthread.sigcatch)
> -
> -        # Start a local XML-RPC test server
> -        srvthread.start()
> -        print("** Waiting 2 seconds for server to settle")
> -        time.sleep(2)
> -
> -        # Start the client test
> -        print("** Starting client tests")
> -        clienttest.RunTest()
> -        ret = 0
> -    except Exception as e:
> -        print("** EXCEPTION: %s" % str(e))
> -    finally:
> -        # Stop the local XML-RPC test server
> -        srvthread.stop()
> -    return ret
> -
> -if __name__ == "__main__":
> -    sys.exit(unit_test('..'))
> diff --git a/server/xmlrpc_API1.py b/server/xmlrpc_API1.py
> deleted file mode 100644
> index e2ad4ec..0000000
> --- a/server/xmlrpc_API1.py
> +++ /dev/null
> @@ -1,100 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0-or-later
> -#
> -#   xmlrpc_API1.py
> -#   XML-RPC functions supported by the API1 version for the rteval server
> -#
> -#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
> -#
> -
> -import os
> -import bz2
> -import base64
> -import libxml2
> -import string
> -import platform
> -import rtevaldb
> -
> -
> -class XMLRPC_API1():
> -    def __init__(self, config=None, debug=False, nodbaction=False):
> -        # Some defaults
> -        self.apiversion = 1
> -        self.fnametrans = string.maketrans("/\\.", "::_") # replace path delimiters in filenames
> -        self.debug = debug
> -        self.nodbaction = nodbaction
> -        self.config = config
> -
> -
> -    def __mkdatadir(self, dirpath):
> -        startdir = os.getcwd()
> -        if dirpath[0] == '/':
> -            os.chdir('/')
> -        for dir in dirpath.split("/"):
> -            if dir is '':
> -                continue
> -            if not os.path.exists(dir):
> -                os.mkdir(dir, 0o700)
> -            os.chdir(dir)
> -        os.chdir(startdir)
> -
> -
> -    def __getfilename(self, dir, fname, ext, comp):
> -        idx = 0
> -        if comp:
> -            filename = "%s/%s/%s%s.bz2" % (self.config.datadir, dir, fname.translate(self.fnametrans), ext)
> -        else:
> -            filename = "%s/%s/%s%s" % (self.config.datadir, dir, fname.translate(self.fnametrans), ext)
> -
> -        while 1:
> -            if not os.path.exists(filename):
> -                return filename
> -            idx += 1
> -            if comp:
> -                filename = "%s/%s/%s-{%i}.bz2" % (self.config.datadir, dir,
> -                                                  fname.translate(self.fnametrans), idx)
> -            else:
> -                filename = "%s/%s/%s-{%i}" % (self.config.datadir, dir,
> -                                              fname.translate(self.fnametrans), idx)
> -
> -
> -    def Dispatch(self, method, params):
> -        # Call the method requested
> -        # FIXME: Improve checking for valid methods
> -        func = getattr(self, method)
> -        return func(*params)
> -
> -
> -    def _dispatch(self, method, params):
> -        "Wrapper method for Dispatch(), used by xmlrpclib in a local test server. Only used for testing."
> -        return self.Dispatch(method, params)
> -
> -
> -    def SendReport(self, clientid, xmlbzb64):
> -        decompr = bz2.BZ2Decompressor()
> -        xmldoc = libxml2.parseDoc(decompr.decompress(base64.b64decode(xmlbzb64)))
> -
> -        # Save a copy of the report on the file system
> -        # Make sure we have a directory to write files into
> -        self.__mkdatadir(os.path.join(self.config.datadir, 'queue'))
> -        fname = self.__getfilename('queue/', ('%s' % clientid), '.xml', False)
> -        xmldoc.saveFormatFileEnc(fname,'UTF-8',1)
> -        if self.debug:
> -            print("Copy of report: %s" % fname)
> -
> -        # Register the submission and put it in a parse queue
> -        rterid = rtevaldb.register_submission(self.config, clientid, fname,
> -                                                        debug=self.debug, noaction=self.nodbaction)
> -        if self.nodbaction:
> -            rterid = 999999999 # Fake ID when no database registration is done
> -
> -        return rterid
> -
> -
> -    def Hello(self, clientid):
> -        return {"greeting": "Hello %s" % clientid,
> -                "server": platform.node(),
> -                "APIversion": self.apiversion}
> -
> -
> -    def DatabaseStatus(self):
> -        return rtevaldb.database_status(self.config)
> diff --git a/unit-tests/unittest.py b/unit-tests/unittest.py
> index a60af16..00811d7 100644
> --- a/unit-tests/unittest.py
> +++ b/unit-tests/unittest.py
> @@ -113,7 +113,6 @@ if __name__ == '__main__':
>              ('rteval/sysinfo','dmi'),
>              ('rteval','rtevalConfig'),
>              ('rteval','xmlout'),
> -            ('server','unittest')
>              ))
>      # Run all tests
>      tests.RunTests()
> -- 

Thank you

Signed-off-by: John Kacur <jkacur@redhat.com>
diff mbox series

Patch

diff --git a/.gitignore b/.gitignore
index 4043947..a6e9401 100644
--- a/.gitignore
+++ b/.gitignore
@@ -27,9 +27,4 @@  MANIFEST
 .deps
 stamp-h1
 autom4te.cache/
-server/Makefile
-server/config.log
-server/config.status
-server/parser/Makefile
-server/parser/config.h
 rteval-[0-9]*
diff --git a/Makefile b/Makefile
index b8bed64..d9a6b9f 100644
--- a/Makefile
+++ b/Makefile
@@ -9,10 +9,6 @@  PACKAGE :=	rteval
 VERSION :=      $(shell $(PYTHON) -c "from rteval import RTEVAL_VERSION; print(RTEVAL_VERSION)")
 D	:=	10
 
-# XML-RPC related files
-XMLRPCVER := 1.6
-XMLRPCDIR := server
-
 DESTDIR	:=
 PREFIX  :=      /usr
 DATADIR	:=	$(DESTDIR)/$(PREFIX)/share
@@ -35,11 +31,9 @@  sysreport:
 	$(PYTHON) rteval-cmd -D -v --workdir=$(HERE)/run --loaddir=$(HERE)/loadsource --duration=$(D) -i $(HERE)/rteval --sysreport
 
 clean:
-	[ -f $(XMLRPCDIR)/Makefile ] && make -C $(XMLRPCDIR) clean || echo -n
-	rm -f *~ rteval/*~ rteval/*.py[co] *.tar.bz2 *.tar.gz doc/*~ server/rteval-xmlrpc-*.tar.gz
+	rm -f *~ rteval/*~ rteval/*.py[co] *.tar.bz2 *.tar.gz doc/*~
 
 realclean: clean
-	[ -f $(XMLRPCDIR)/Makefile ] && make -C $(XMLRPCDIR) maintainer-clean || echo -n
 	rm -rf run
 
 install: install_loads install_rteval
@@ -67,13 +61,6 @@  rteval-$(VERSION).tar.bz2:
 	mv dist/rteval-$(VERSION).tar.bz2 .
 	rmdir dist
 
-rteval-xmlrpc-$(XMLRPCVER).tar.gz :
-	cd $(XMLRPCDIR) ;             \
-	autoreconf --install ;           \
-	./configure --prefix=$(PREFIX) ; \
-	make distcheck
-	cp $(XMLRPCDIR)/rteval-xmlrpc-$(XMLRPCVER).tar.gz $(HERE)/
-
 help:
 	@echo ""
 	@echo "rteval Makefile targets:"
diff --git a/doc/rteval.8 b/doc/rteval.8
index a8129f1..578de37 100644
--- a/doc/rteval.8
+++ b/doc/rteval.8
@@ -84,12 +84,6 @@  information on the running system.
 .B \-D, \-\-debug
 Turn on debugging prints during run
 .TP
-.B \-X HOST, \-\-xmprpc-submit=HOST
-Have rteval send report data to HOST following the run, using XML-RPC
-.TP
-.B \-P, \-\-xmlrpc-no-abort
-Do not abort if XML-RPC server do not respond to ping  request
-.TP
 .B \-Z, \-\-summarize
 Have rteval summarize an existing report. This will not cause loads or
 meausurement utilities to be run.
diff --git a/doc/rteval.txt b/doc/rteval.txt
index 569168e..95d501b 100644
--- a/doc/rteval.txt
+++ b/doc/rteval.txt
@@ -33,8 +33,7 @@  boost the system load.
 Rteval runs for a specified length of time (typically 12 hours). When
 an rteval run is completed, a statisical analysis of the results is
 done, an XML file is generated, containing system state, raw result
-data and statistical analysis results and optionally the XML is sent
-by XML-RPC to a database for reporting.
+data and statistical analysis results.
 
 The Load Applications
 ---------------------
@@ -228,18 +227,3 @@  A --numa option was added to the cyclictest program to use the libnuma
 library to bind threads to local memory nodes and allocate memory on
 the closest memory node, so to minimize the time required to access
 memory. 
-
-Further Development
--------------------
-
-Once we started getting rteval run information it was natural that we
-would want to store it in a database for further analysis (especially
-watching for performance regressions). David Sommerseth created a set
-of tables for a PostgreSQL database and then added an option to rteval
-to ship the results back to a database server using XML-RPC. This
-option is currently used internally at Red Hat do ship rteval run data
-back to our internal DB server. There are no plans to open this data
-up to the public, but the XML-RPC code is there if someone else wants
-to use the facility. (No, there are no backdoors in the code that ship
-run data back to Red Hat; it's Python code, look and see!). 
-
diff --git a/rteval-cmd b/rteval-cmd
index a5e8746..b242aa4 100755
--- a/rteval-cmd
+++ b/rteval-cmd
@@ -122,12 +122,6 @@  def parse_options(cfg, parser, cmdargs):
     parser.add_argument("-D", '--debug', dest='rteval___debugging',
                       action='store_true', default=rtevcfg.debugging,
                       help=f'turn on debug prints (default: {rtevcfg.debugging})')
-    #parser.add_option("-X", '--xmlrpc-submit', dest='rteval___xmlrpc',
-    #                  action='store', default=rtevcfg.xmlrpc, metavar='HOST',
-    #                  help='Hostname to XML-RPC server to submit reports')
-    #parser.add_option("-P", "--xmlrpc-no-abort", dest="rteval___xmlrpc_noabort",
-    #                  action='store_true', default=False,
-    #                  help="Do not abort if XML-RPC server do not respond to ping request");
     parser.add_argument("-Z", '--summarize', dest='rteval___summarize',
                       action='store_true', default=False,
                       help='summarize an already existing XML report')
diff --git a/rteval/__init__.py b/rteval/__init__.py
index ca018f6..b5db3b3 100644
--- a/rteval/__init__.py
+++ b/rteval/__init__.py
@@ -22,10 +22,8 @@  import sysconfig
 from rteval.modules.loads import LoadModules
 from rteval.modules.measurement import MeasurementModules, MeasurementProfile
 from rteval.rtevalReport import rtevalReport
-from rteval.rtevalXMLRPC import rtevalXMLRPC
 from rteval.Log import Log
 from rteval import rtevalConfig
-from rteval import rtevalMailer
 from rteval import version
 
 RTEVAL_VERSION = version.RTEVAL_VERSION
@@ -70,12 +68,6 @@  class RtEval(rtevalReport):
         from .sysinfo import SystemInfo
         self._sysinfo = SystemInfo(self.__rtevcfg, logger=self.__logger)
 
-        # prepare a mailer, if that's configured
-        if self.__cfg.HasSection('smtp'):
-            self.__mailer = rtevalMailer.rtevalMailer(self.__cfg.GetSection('smtp'))
-        else:
-            self.__mailer = None
-
         if not os.path.exists(self.__rtevcfg.xslt_report):
             raise RuntimeError(f"can't find XSL template ({self.__rtevcfg.xslt_report})!")
 
@@ -91,19 +83,6 @@  class RtEval(rtevalReport):
         rtevalReport.__init__(self, self.__version,
                               self.__rtevcfg.installdir, self.__rtevcfg.annotate)
 
-        # If --xmlrpc-submit is given, check that we can access the server
-        if self.__rtevcfg.xmlrpc:
-            self.__xmlrpc = rtevalXMLRPC(self.__rtevcfg.xmlrpc, self.__logger, self.__mailer)
-            if not self.__xmlrpc.Ping():
-                if not self.__rtevcfg.xmlrpc_noabort:
-                    print(f"ERROR: Could not reach XML-RPC server '{self.__rtevcfg.xmlrpc}'.  Aborting.")
-                    sys.exit(2)
-                else:
-                    print("WARNING: Could not ping the XML-RPC server.  Will continue anyway.")
-        else:
-            self.__xmlrpc = None
-
-
     @staticmethod
     def __show_remaining_time(remaining):
         secs = int(remaining)
@@ -271,10 +250,6 @@  class RtEval(rtevalReport):
         if self.__rtevcfg.sysreport:
             self._sysinfo.run_sysreport(self.__reportdir)
 
-        # if --xmlrpc-submit | -X was given, send our report to the given host
-        if self.__xmlrpc:
-            rtevalres = self.__xmlrpc.SendReport(self.GetXMLreport())
-
         if earlystop:
             rtevalres = 1
         self._sysinfo.copy_dmesg(self.__reportdir)
diff --git a/rteval/rtevalConfig.py b/rteval/rtevalConfig.py
index 030d420..2c0436a 100644
--- a/rteval/rtevalConfig.py
+++ b/rteval/rtevalConfig.py
@@ -73,7 +73,6 @@  default_config = {
         'workdir'    : os.getcwd(),
         'installdir' : installdir,
         'srcdir'     : default_config_search(['loadsource']),
-        'xmlrpc'     : None,
         'xslt_report': default_config_search(['rteval_text.xsl'], os.path.isfile),
         'xslt_histogram': default_config_search(['rteval_histogram_raw.xsl'], os.path.isfile),
         'report_interval': '600',
diff --git a/rteval/rtevalMailer.py b/rteval/rtevalMailer.py
deleted file mode 100644
index ef3b571..0000000
--- a/rteval/rtevalMailer.py
+++ /dev/null
@@ -1,51 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   rtevalmailer.py - module for sending e-mails
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import smtplib
-import email
-
-
-class rtevalMailer(object):
-    "rteval mailer - sends messages via an SMTP server to designated e-mail addresses"
-
-    def __init__(self, cfg):
-        # this configuration object needs to have the following attributes set:
-        # * smtp_server
-        # * from_address
-        # * to_address
-        #
-        errmsg = ""
-        if 'smtp_server' not in cfg:
-            errmsg = "\n** Missing smtp_server in config"
-        if 'from_address' not in cfg:
-            errmsg += "\n** Missing from_address in config"
-        if 'to_address' not in cfg:
-            errmsg += "\n** Missing to_address in config"
-
-        if not errmsg == "":
-            raise LookupError(errmsg)
-
-        self.config = cfg
-
-
-    def __prepare_msg(self, subj, body):
-        msg = email.MIMEText.MIMEText(body)
-        msg['subject'] = subj;
-        msg['From'] = "rteval mailer <" + self.config.from_address+">"
-        msg['To'] = self.config.to_address
-        return msg
-
-
-    def SendMessage(self, subject, body):
-        "Sends an e-mail to the configured mail server and recipient"
-
-        msg = self.__prepare_msg(subject, body)
-        srv = smtplib.SMTP()
-        srv.connect(self.config.smtp_server)
-        srv.sendmail(self.config.from_address, self.config.to_address, str(msg))
-        srv.close()
-
diff --git a/rteval/rtevalXMLRPC.py b/rteval/rtevalXMLRPC.py
deleted file mode 100644
index 6b31653..0000000
--- a/rteval/rtevalXMLRPC.py
+++ /dev/null
@@ -1,97 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-# rtevalXMLRPC.py - main rteval XML-RPC class
-#
-#   Copyright 2009 - 2013   Clark Williams <williams@redhat.com>
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import socket
-import time
-import xmlrpc.client
-from .rtevalclient import rtevalclient
-from .Log import Log
-
-class rtevalXMLRPC:
-    def __init__(self, host, logger, mailer=None):
-        self.__host = host
-        self.__url = f"http://{self.__host}/rteval/API1/"
-        self.__logger = logger
-        self.__mailer = mailer
-        self.__client = rtevalclient.rtevalclient(self.__url)
-
-
-    def Ping(self):
-        res = None
-        self.__logger.log(Log.DEBUG, f"Checking if XML-RPC server '{self.__host}' is reachable")
-        attempt = 0
-        ping_success = False
-        warning_sent = False
-        while attempt < 6:
-            try:
-                res = self.__client.Hello()
-                attempt = 10
-                ping_success = True
-            except xmlrpc.client.ProtocolError:
-                # Server do not support Hello(), but is reachable
-                self.__logger.log(Log.INFO, f"Got XML-RPC connection with {self.__host} but it did not support Hello()")
-                res = None
-            except socket.error as err:
-                self.__logger.log(Log.INFO, f"Could not establish XML-RPC contact with {self.__host}\n{str(err)}")
-
-                # Do attempts handling
-                attempt += 1
-                if attempt > 5:
-                    break # To avoid sleeping before we abort
-
-                if (self.__mailer is not None) and (not warning_sent):
-                    self.__mailer.SendMessage("[RTEVAL:WARNING] Failed to ping XML-RPC server", f"Server {self.__host} did not respond.")
-                    warning_sent = True
-
-                print(f"Failed pinging XML-RPC server.  Doing another attempt({attempt}) ")
-                time.sleep(attempt) #*15) # Incremental sleep - sleep attempts*15 seconds
-                ping_success = False
-
-        if res:
-            self.__logger.log(Log.INFO, f'Verified XML-RPC connection with {res["server"]} (XML-RPC API version: {res["APIversion"]})')
-            self.__logger.log(Log.DEBUG, f"Recieved greeting: {res['greeting']}")
-        return ping_success
-
-
-    def SendReport(self, xmlreport):
-        "Sends the report to a given XML-RPC host.  Returns 0 on success or 2 on submission failure."
-
-        attempt = 0
-        exitcode = 2   # Presume failure
-        warning_sent = False
-        while attempt < 6:
-            try:
-                print(f"Submitting report to {self.__url}")
-                rterid = self.__client.SendReport(xmlreport)
-                print(f"Report registered with submission id {rterid}")
-                attempt = 10
-                exitcode = 0 # Success
-            except socket.error:
-                attempt += 1
-                if attempt > 5:
-                    break # To avoid sleeping before we abort
-
-                if (self.__mailer is not None) and (not warning_sent):
-                    self.__mailer.SendMessage("[RTEVAL:WARNING] Failed to submit report to XML-RPC server", f"Server {self.__host} did not respond.  Not giving up yet.")
-                    warning_sent = True
-
-                print(f"Failed sending report. Making another attempt({attempt}) ")
-                time.sleep(attempt) #*5*60) # Incremental sleep - sleep attempts*5 minutes
-
-            except Exception as err:
-                raise err
-
-
-        if self.__mailer is not None:
-            # Send final result messages
-            if exitcode == 2:
-                self.__mailer.SendMessage("[RTEVAL:FAILURE] Failed to submit report to XML-RPC server", f"Server {self.__host} did not respond at all after {attempt - 1} attempts.")
-            elif (exitcode == 0) and warning_sent:
-                self.__mailer.SendMessage("[RTEVAL:SUCCESS] XML-RPC server available again",
-                                          f"Succeeded to submit the report to {self.__host}")
-
-        return exitcode
diff --git a/rteval/rtevalclient.py b/rteval/rtevalclient.py
deleted file mode 100644
index 8f48129..0000000
--- a/rteval/rtevalclient.py
+++ /dev/null
@@ -1,60 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   rtevalclient.py
-#   XML-RPC client for sending data to a central rteval result server
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import xmlrpc.client
-import libxml2
-import io
-import bz2
-import base64
-import platform
-
-class rtevalclient:
-    """
-    rtevalclient is a library for sending rteval reports to an rteval server via XML-RPC.
-    """
-    def __init__(self, url="http://rtserver.farm.hsv.redhat.com/rteval/API1/", hostn = None):
-        self.srv = xmlrpc.client.ServerProxy(url)
-        if hostn is None:
-            self.hostname = platform.node()
-        else:
-            self.hostname = hostn
-
-    def Hello(self):
-        return self.srv.Hello(self.hostname)
-
-    def DatabaseStatus(self):
-        return self.srv.DatabaseStatus()
-
-    def SendReport(self, xmldoc):
-        if xmldoc.type != 'document_xml':
-            raise Exception("Input is not XML document")
-
-        fbuf = io.StringIO()
-        xmlbuf = libxml2.createOutputBuffer(fbuf, 'UTF-8')
-        doclen = xmldoc.saveFileTo(xmlbuf, 'UTF-8')
-
-        compr = bz2.BZ2Compressor(9)
-        cmpr = compr.compress(fbuf.getvalue())
-        data = base64.b64encode(cmpr + compr.flush())
-        ret = self.srv.SendReport(self.hostname, data)
-        print(f"rtevalclient::SendReport() - Sent {len(data)} bytes (XML document length: {doclen} bytes, compression ratio: {(1-(float(len(data)) / float(doclen)))*100}:.2f)")
-        return ret
-
-    def SendDataAsFile(self, fname, data, decompr = False):
-        compr = bz2.BZ2Compressor(9)
-        cmprdata = compr.compress(data)
-        b64data = base64.b64encode(cmprdata + compr.flush())
-        return self.srv.StoreRawFile(self.hostname, fname, b64data, decompr)
-
-
-    def SendFile(self, fname, decompr = False):
-        f = open(fname, "r")
-        srvname = self.SendDataAsFile(fname, f.read(), decompr)
-        f.close()
-        return srvname
-
diff --git a/server/COPYING b/server/COPYING
deleted file mode 100644
index d159169..0000000
--- a/server/COPYING
+++ /dev/null
@@ -1,339 +0,0 @@ 
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) year name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.
diff --git a/server/INSTALL b/server/INSTALL
deleted file mode 100644
index 2550dab..0000000
--- a/server/INSTALL
+++ /dev/null
@@ -1,302 +0,0 @@ 
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008, 2009 Free Software Foundation, Inc.
-
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-   Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package.  The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.
-
-     Running `configure' might take a while.  While running, it prints
-     some messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-  6. Often, you can also type `make uninstall' to remove the installed
-     files again.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-   On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor.  Like
-this:
-
-     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
-                 CPP="gcc -E" CXXCPP="g++ -E"
-
-   This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
-   By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Particular systems
-==================
-
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
-     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
-   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-a workaround.  If GNU CC is not installed, it is therefore recommended
-to try
-
-     ./configure CC="cc"
-
-and if that doesn't work, try
-
-     ./configure CC="cc -nodtk"
-
-   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
-   On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'.  It is recommended to use the following options:
-
-     ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS
-     KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug.  Until the bug is fixed you can use this workaround:
-
-     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
-     Print a summary of the options unique to this package's
-     `configure', and exit.  The `short' variant lists options used
-     only in the top level, while the `recursive' variant lists options
-     also present in any nested packages.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`--prefix=DIR'
-     Use DIR as the installation prefix.  *Note Installation Names::
-     for more details, including other options available for fine-tuning
-     the installation locations.
-
-`--no-create'
-`-n'
-     Run the configure checks, but stop before creating any output
-     files.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-
diff --git a/server/Logger.py b/server/Logger.py
deleted file mode 100644
index e10ad25..0000000
--- a/server/Logger.py
+++ /dev/null
@@ -1,19 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-import sys
-from datetime import datetime
-
-class Logger():
-    def __init__(self, logfile, prefix):
-        self.log = sys.stdout
-        self.logopen = True
-        self.prefix = prefix
-
-    def Log(self, grp, msg):
-        if self.logopen == True:
-            tstmp = datetime.today().strftime("%Y-%m-%d %H:%M:%S")
-            self.log.write("%s [%s::%s]: %s\n" % (tstmp, self.prefix, grp, msg))
-            self.log.flush()
-
-    def LogFD(self):
-        return self.log.fileno()
-
diff --git a/server/Makefile.am b/server/Makefile.am
deleted file mode 100644
index fa53684..0000000
--- a/server/Makefile.am
+++ /dev/null
@@ -1,38 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#   Makefile.am - autotools configuration file
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-SUBDIRS = parser
-dist_doc_DATA = parser/README.parser 	\
-	sql/delta-1.0_1.1.sql 		\
-	sql/delta-1.1_1.2.sql 		\
-	sql/delta-1.2_1.3.sql 		\
-	sql/delta-1.3_1.4.sql 		\
-	sql/rteval-$(SQLSCHEMAVER).sql
-
-apache-rteval.conf:
-if ENAB_MODPYTHON
-	[ -n $(XMLRPCROOT) ] && $(srcdir)/gen_config.sh apache-rteval.conf $(XMLRPCROOT)/API1
-else
-	[ -n $(XMLRPCROOT) ] && $(srcdir)/gen_config.sh apache-rteval-wsgi.conf $(XMLRPCROOT)/API1
-endif
-
-clean-local:
-	-rm -f apache-rteval.conf *~
-
-dist-hook:
-	cp $(srcdir)/gen_config.sh $(srcdir)/apache-rteval.conf.tpl $(srcdir)/apache-rteval-wsgi.conf.tpl $(distdir)/
-	-rm -f $(distdir)/apache-rteval.conf
-
-if ENAB_XMLRPC
-    xmlrpcdir = $(XMLRPCROOT)/API1
-    BUILT_SOURCES = apache-rteval.conf
-    dist_doc_DATA += README.xmlrpc apache-rteval.conf
-    dist_xmlrpc_DATA = xmlrpc_API1.py rtevaldb.py database.py
-if ENAB_MODPYTHON
-    dist_xmlrpc_DATA += rteval_xmlrpc.py
-else
-    dist_xmlrpc_DATA += rteval_xmlrpc.wsgi
-endif
-endif
diff --git a/server/README.xmlrpc b/server/README.xmlrpc
deleted file mode 100644
index 20bade2..0000000
--- a/server/README.xmlrpc
+++ /dev/null
@@ -1,201 +0,0 @@ 
-**
-** Setting up a rteval XML-RPC server
-**
-
-The XML-RPC server has the purpose of collecting information from
-several rteval clients.  All the data in the summary.xml produced by the
-rteval script is sent over to the XML-RPC server and registered in a
-submission queue.  The XML-RPC server will then send back a submission
-ID to the client.
-
-A parser daemon needs to run as well.  This daemon is connected to the
-same database as the XML-RPC service and it will wait for new reports in
-the submission queue to be parsed.  Look into the README.parser file
-for more information on setting up the rteval_parserd process.
-
-Each parsed report will get a unique system ID which then can be used to
-track how each system changes behaviour on different kernels.
-
-
-**
-** Requirements
-**
-   - Apache web server
-   - mod_python-3.3.x OR mod_wsgi-3.2 or newer.
-   - PostgreSQL v8.3 or later
-   - rteval 1.12 or later
-
-
-**
-** Apache preparations
-**
-
-The default path used for the rteval client is
-
-    http://{server hostname}/rteval/API1/
-
-If you have a HTTP setup which will follow this scheme, you do not
-need to change any URLs at all.
-
-When installing the rteval-xmlrpc-1.4 RPM on a Fedora/RHEL based box,
-Apache will be automatically configured.  But the Apache web server
-will need to be restarted when you have setup the database.
-
-     # server httpd restart
-
-For manual installations, see the instructions under "Building and
-installing from source" further down in this file.
-
-
-**
-** Database preparations
-**
-
-** Setting up a new database
-All reports are saved in a database.  If you have not used the
-rteval-xmlrpc interface before, you need to create the needed database
-user and database, execute the following command line:
-
-   # psql < /usr/share/doc/rteval-xmlrpc-1.5/rteval-1.4.sql
-
-This script will first create a database user called 'rtevxmlrpc' and
-'rtevparser', assign default password before creating the database called
-'rteval'.  The database will be populated with the needed tables and the
-'rtevxmlrpc' and 'rtevparser' users will get the needed privileges to do
-their job.
-
-Remember to also update the pg_hba.conf file in the PostgreSQL data
-directory.  You need to allow the xmlrpc user access from the web
-server.
-
-pg_hba.conf entry example:
------------------------------------------------------------------
-# TYPE  DATABASE    USER        CIDR-ADDRESS          METHOD
-hostssl rteval	    rtevxmlrpc	127.0.0.1/32	      md5
-hostssl rteval	    rtevparser	127.0.0.1/32	      md5
------------------------------------------------------------------
-
-The XML-RPC database connector will always try to connect via SSL.  To
-modify the default password, connect to the database with psql and
-issue this SQL command:
-
-   rteval=# ALTER USER rtevxmlrpc WITH ENCRYPTED PASSWORD '<newpassword>';
-   rteval=# ALTER USER rtevparser WITH ENCRYPTED PASSWORD '<newpassword>';
-
-Or you can use the "safe mode" via the psql command:
-
-   rteval=# \password rtevxmlrpc
-   Enter new password:
-   Enter it again:
-   rteval=# \password rtevparser
-   Enter new password:
-   Enter it again:
-
-
-** Update an already existing database
-If you already have an rteval database setup, you can run the delta
-scripts to only do the pure database schema changes.
-
-To find out which schema version you using, do the following:
-
-   psql rteval -c "SELECT value FROM rteval_info WHERE key='sql_schema_ver'"
-   value
-   -------
-     1.1
-   (1 row)
-
-This indicates that the database is at the schema version 1.1.  If you do not
-have the rteval_info table, you are for sure on schema version 1.0.
-
-* Update from SQL schema version 1.0 to 1.1
-   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.0_1.1.sql
-
-* Update from SQL schema version 1.1 to 1.2
-   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.1_1.2.sql
-
-* Update from SQL schema version 1.2 to 1.3
-   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.2_1.3.sql
-
-* Update from SQL schema version 1.3 to 1.4
-   psql rteval < /usr/share/doc/rteval-xmlrpc-1.1/delta-1.3_1.4.sql
-
-You need to upgrade to the latest SQL schema available, and you must upgrade
-sequentially through all the version in between your version and the latest.
-
-
-**
-** Building an installing from source
-**
-
-The rteval-xmlrpc uses autotools to configure and build the
-rteval-xmlrpc server and parser.
-
-   ./configure [--with-xmlrpc-webroot=<full path>]
-
-If the --with-xmlrpc-webroot is not provided, the mod_python files
-needed for the XML-RPC server will not be installed, and only the
-report parser will be built and installed.
-
-The path to the --with-xmlrpc-webroot must be a directory which the
-Apache web server can access and serve files from (htdocs dir).  On
-Fedora/RHEL this path should be:
-
-     ./configure --with-xmlrpc-webroot=/var/www/html/rteval
-
-With this done, you can now do the traditional 'make' and 'make
-install'.  The default install prefix is /usr/local, unless you
-changed it with --prefix=<path>.  You will then find the
-rteval_parserd installed under /usr/local/bin/rteval_parserd and
-README files, the SQL scripts and an Apache config file will be found
-under /usr/local/share/doc/rteval-parser-1.5/
-
-The Apache configuration file can be copied into the configuration
-directory Apache uses for its modules.  On RHEL/Fedora based
-distributions, the apache-rteval.conf can be copied into
-/etc/httpd/conf.d/
-
-For more information about the report parser (rteval-parserd), please
-have a look at the README.parser file.
-
-
-**
-**  Configuration
-**
-
-If you are not using any of the default values for
-the database configuration, you need to create or modify the
-/etc/rteval.conf file.  The XML-RPC service will read the
-[xmlrpc_server] section in this file.
-
-This is the default values, if the xmlrpc_server section is not found
-or parameters is not set.
-
-     # Paths
-     datadir:     /var/lib/rteval
-
-     # Database parameters
-     db_server:   localhost
-     db_port:     5432
-     database:    rteval
-     db_username: xmlrpc
-     db_password: rtevaldb
-
-The directory the datadir parameter points at must be writable to the
-apache process.  Here copies of the received summary.xml files will be
-saved before the rteval-parserd process parses the reports.
-
-
-**
-** Testing the setup
-**
-
-For a quick test, dig up a summary.xml file from an earlier rteval run and
-try sending it to the XML-RPC server by using the testclient_sendreportfile
-script:
-
-     ./testclient_sendreportfile --report=summary.xml \
-                                 --xmlrpc-submit=localhost
-
-See --help for more info on this utility.  Usually the log files of Apache and
-PostgreSQL provides pretty good information if something goes wrong.
-
diff --git a/server/apache-rteval-wsgi.conf.tpl b/server/apache-rteval-wsgi.conf.tpl
deleted file mode 100644
index c6cf00f..0000000
--- a/server/apache-rteval-wsgi.conf.tpl
+++ /dev/null
@@ -1,22 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-# File: apache-rteval.conf
-#
-# Apache config entry to enable the rteval XML-RPC server
-#
-#   Copyright 2011 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-WSGISocketPrefix /var/run/wsgi
-WSGIDaemonProcess rtevalxmlrpc processes=3 threads=15 python-path={_INSTALLDIR_}
-WSGIScriptAlias /rteval/API1 {_INSTALLDIR_}/rteval_xmlrpc.wsgi
-
-<Directory "{_INSTALLDIR_}">
-    Options Indexes FollowSymLinks
-    AllowOverride None
-    Order allow,deny
-    Allow from all
-
-    WSGIProcessGroup rtevalxmlrpc
-    WSGICallableObject rtevalXMLRPC_handler
-</Directory>
-
diff --git a/server/apache-rteval.conf.tpl b/server/apache-rteval.conf.tpl
deleted file mode 100644
index f52754c..0000000
--- a/server/apache-rteval.conf.tpl
+++ /dev/null
@@ -1,18 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-# File: apache-rteval.conf
-#
-# Apache config entry to enable the rteval XML-RPC server
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-<Directory "{_INSTALLDIR_}">
-    Options Indexes FollowSymLinks
-    AllowOverride None
-    Order allow,deny
-    Allow from all
-
-    SetHandler python-program
-    PythonHandler rteval_xmlrpc
-    PythonDebug On
-</Directory>
-
diff --git a/server/configure.ac b/server/configure.ac
deleted file mode 100644
index 504efbf..0000000
--- a/server/configure.ac
+++ /dev/null
@@ -1,130 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#   configure.ac - autotools configuration file
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-#
-#
-#   To create the ./configure script you need to run 'autoreconf --install'
-#
-
-AC_INIT([rteval-xmlrpc], [1.6], [davids@redhat.com])
-SQLSCHEMAVER=1.5
-AC_SUBST(SQLSCHEMAVER)
-
-AM_INIT_AUTOMAKE([-Wall -Werror foreign])
-AC_PROG_CC
-
-AC_ARG_WITH([xmlrpc-webroot],
-	[AS_HELP_STRING([--with-xmlrpc-webroot],
-			[Location where to install the XML-RPC mod_python files])],
-	[XMLRPCROOT="$withval"]
-)
-AC_SUBST(XMLRPCROOT)
-AM_CONDITIONAL([ENAB_XMLRPC], [test ! -z $XMLRPCROOT])
-
-AC_ARG_ENABLE([mod-python],
-        [AS_HELP_STRING([--with-mod-python],
-                        [Enable the older mod_python support instead of mod_wsgi])],
-        [MODPYTHON="$enableval"]
-)
-AC_SUBST(MODPYTHON)
-AM_CONDITIONAL([ENAB_MODPYTHON], [test ! -z $MODPYTHON])
-
-# Simple macro to abort on missing functions in libraries
-AC_DEFUN([AX_msgMISSINGFUNC], AC_MSG_ERROR([Could not find function in library.  Aborting]))
-
-# Save original CPPFLAGS
-save_CPPFLAGS="$CPPFLAGS"
-
-# Check for libxml2
-AC_CHECK_PROGS([XML2CFG], [xml2-config], [:])
-if test "$XML2CFG" = :; then
-   AC_MSG_ERROR([This package needs xml2-config from libxml2])
-else
-   AC_SUBST([LIBXML2_INC], [$(xml2-config --cflags)])
-   CPPFLAGS="$CPPFLAGS $LIBXML2_INC"
-fi
-AC_CHECK_HEADERS([libxml/tree.h])
-AC_CHECK_HEADERS([libxml/xmlsave.h])
-AC_CHECK_HEADERS([libxml/xmlstring.h])
-AC_CHECK_HEADERS([libxml/parser.h])
-AC_CHECK_LIB([xml2],[xmlInitParser], [], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlCleanupParser], [DUMMY=], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlStrcmp], [DUMMY=], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlFreeDoc], [DUMMY=], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlSaveToBuffer], [DUMMY=], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlSaveTree], [DUMMY=], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlSaveClose], [DUMMY=], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlBufferFree], [DUMMY=], AX_msgMISSINGFUNC)
-AC_CHECK_LIB([xml2],[xmlParseFile], [DUMMY=], AX_msgMISSINGFUNC)
-
-# Check for libxslt
-AC_CHECK_PROGS([XSLTCFG], [xslt-config], [:])
-if test "$XSLTCFG" = :; then
-   AC_MSG_ERROR([This package needs xslt-config from libxslt])
-else
-   AC_SUBST([LIBXSLT_INC], [$(xslt-config --cflags)])
-   CPPFLAGS="$CPPFLAGS $LIBXSLT_INC"
-   LDFLAGS="$LDFLAGS -lexslt"
-fi
-AC_CHECK_HEADERS([libxslt/xsltInternals.h])
-AC_CHECK_HEADERS([libxslt/transform.h])
-AC_CHECK_HEADERS([libxslt/xsltutils.h])
-AC_CHECK_LIB([xslt], [xsltInit], [], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([xslt], [xsltCleanupGlobals], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([xslt], [xsltParseStylesheetFile], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([xslt], [xsltApplyStylesheet], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([xslt], [xsltFreeStylesheet], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([exslt], [exsltRegisterAll], [DUMMY=], AX_msgMISSINGFUNC())
-
-# Check for libpq
-AC_CHECK_PROGS([PGSQLCFG], [pg_config], [:])
-if test "$PGSQLCFG" = :; then
-   AC_MSG_ERROR([This package needs pg_config from PostgreSQL])
-else
-   AC_SUBST([LIBPQ_INC], [-I$(pg_config --includedir)])
-   CPPFLAGS="$CPPFLAGS $LIBPQ_INC"
-fi
-AC_CHECK_HEADERS([libpq-fe.h])
-AC_CHECK_LIB([pq], [PQsetdbLogin], [], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQstatus], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQexec], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQreset], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQfinish], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQprepare], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQexecPrepared], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQresultStatus], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQclear], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQconsumeInput], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQnotifies], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pq], [PQntuples], [DUMMY=], AX_msgMISSINGFUNC())
-
-# Restore the original CPPFLAGS
-CPPFLAGS="$save_CPPFLAGS"
-
-# Check for POSIX features
-AC_CHECK_HEADERS([mq.h])
-AC_CHECK_LIB([rt], [mq_open], [], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([rt], [mq_close], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([rt], [mq_unlink], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([rt], [mq_send], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([rt], [mq_receive], [DUMMY=], AX_msgMISSINGFUNC())
-
-AC_CHECK_HEADERS([pthread.h])
-AC_CHECK_LIB([pthread], [pthread_attr_init], [], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pthread], [pthread_attr_setdetachstate], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pthread], [pthread_attr_destroy], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pthread], [pthread_create], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pthread], [pthread_join], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pthread], [pthread_mutex_lock], [DUMMY=], AX_msgMISSINGFUNC())
-AC_CHECK_LIB([pthread], [pthread_mutex_unlock], [DUMMY=], AX_msgMISSINGFUNC())
-
-# Back to needed autotools stuff
-AC_CONFIG_SRCDIR([parser/rteval-parserd.c])
-AC_CONFIG_HEADERS([parser/config.h])
-AC_CONFIG_FILES([Makefile parser/Makefile])
-AC_SUBST([AM_CXXFLAGS], [$CFLAGS])
-AC_SUBST([AM_LDFLAGS], [$LDFLAGS])
-
-AC_OUTPUT
diff --git a/server/database.py b/server/database.py
deleted file mode 100644
index 684f5ab..0000000
--- a/server/database.py
+++ /dev/null
@@ -1,238 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   database.py
-#   Library for processing results from XMLSQLparser and
-#   query a PostgreSQL database based on the input data
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import psycopg2
-import types
-
-class Database(object):
-    def __init__(self, host=None, port=None, user=None, password=None, database=None,
-                 noaction=False, debug=False):
-        self.noaction = noaction
-        self.debug = debug
-
-        dsnd = {}
-        if host is not None:
-            dsnd['host'] = host
-            dsnd['sslmode'] = 'require'
-        if port is not None:
-            dsnd['port'] = str(port)
-            dsnd['sslmode'] = 'require'
-        if user is not None:
-            dsnd['user'] = user
-        if password is not None:
-            dsnd['password'] = password
-        if database is not None:
-            dsnd['dbname'] = database
-
-        dsn = " ".join(["%s='%s'" %(k,v) for (k,v) in list(dsnd.items())])
-        self.conn = not self.noaction and psycopg2.connect(dsn) or None
-
-
-    def INSERT(self, sqlvars):
-        #
-        # Validate input data
-        #
-        if type(sqlvars) is not dict:
-            raise AttributeError('Input parameter is not a Python dict')
-
-        try:
-            sqlvars['table']
-            sqlvars['fields']
-            sqlvars['records']
-        except KeyError as err:
-            raise KeyError("Input dictionary do not contain a required element: %s").with_traceback(str(err))
-
-        if type(sqlvars['fields']) is not list:
-            raise AttributeError("The 'fields' element is not a list of fields")
-
-        if type(sqlvars['records']) is not list:
-            raise AttributeError("The 'records' element is not a list of fields")
-
-        if len(sqlvars['records']) == 0:
-            return True
-
-        try:
-            sqlvars['returning']
-        except:
-            sqlvars['returning'] = None
-
-        #
-        # Build SQL template
-        #
-        sqlstub = "INSERT INTO %s (%s) VALUES (%s)" % (
-            sqlvars['table'],
-            ",".join(sqlvars['fields']),
-            ",".join(["%%(%s)s" % f for f in sqlvars['fields']])
-            )
-
-        # Get a database cursor
-        curs = not self.noaction and self.conn.cursor() or None
-
-        #
-        # Loop through all records and insert them into the database
-        #
-        results = []
-        for rec in sqlvars['records']:
-            if type(rec) is not list:
-                raise AttributeError("The field values inside the 'records' list must be in a list")
-
-            # Create a dictionary, which will be used for the SQL operation
-            values = {}
-            for i in range(0, len(sqlvars['fields'])):
-                values[sqlvars['fields'][i]] = rec[i]
-
-            if self.debug:
-                print("SQL QUERY: ==> %s" % (sqlstub % values))
-
-            # Do the INSERT query
-            if not self.noaction:
-                curs.execute(sqlstub, values)
-
-            # If a return value for the INSERT is defined, catch that one
-            if not self.noaction and sqlvars['returning']:
-                # The psycopg2 do not handle INSERT INTO ... RETURNING column queries, so we can only use
-                # this on tables with oid and do the look up that way
-                vls = {"table": sqlvars['table'], 'colname': sqlvars['returning'], 'oid': str(curs.lastrowid)}
-                curs.execute("SELECT %(colname)s FROM %(table)s WHERE oid='%(oid)s'" % vls)
-                results.append(curs.fetchone()[0])
-            else:
-                results.append(True)
-
-        if not self.noaction:
-            curs.close()
-        return results
-
-
-    def DELETE(self, table, where):
-        try:
-            sql = "DELETE FROM %s WHERE %s" % (
-                table,
-                " AND ".join(["%s = %%(%s)s" % (k,k) for (k,v) in list(where.items())])
-                )
-
-            if self.debug:
-                print("SQL QUERY ==> %s" % (sql % where))
-
-            if not self.noaction:
-                curs = self.conn.cursor()
-                curs.execute(sql, where)
-                delrows = curs.rowcount
-                curs.close()
-                return delrows
-            else:
-                return 0
-        except Exception as err:
-            raise Exception("** SQL ERROR ** %s\n** SQL ERROR ** Message: %s" % ((sql % where), str(err)))
-
-    def SELECT(self, table, fields, joins=None, where=None):
-        curs = not self.noaction and self.conn.cursor() or None
-
-        # Query
-        try:
-            sql = "SELECT %s FROM %s %s %s" % (
-                ",".join(fields),
-                table,
-                joins and "%s" % joins or "",
-                where and "WHERE %s" % " AND ".join(["%s = %%(%s)s" % (k,k) for (k,v) in list(where.items())] or "")
-                )
-            if self.debug:
-                print("SQL QUERY: ==> %s" % (sql % where))
-            if not self.noaction:
-                curs.execute(sql, where)
-            else:
-                # If no action is setup (mainly for debugging), return empty result set
-                return {"table": table, "fields": [], "records": []}
-        except Exception as err:
-            raise Exception("** SQL ERROR *** %s\n** SQL ERROR ** Message: %s" % (where and (sql % where) or sql, str(err)))
-
-        # Extract field names
-        fields = []
-        for fn in curs.description:
-            fields.append(fn[0])
-
-        # Extract records
-        records = []
-        for dbrec in curs.fetchall():
-            values = []
-            for val in dbrec:
-                values.append(val)
-            records.append(values)
-
-        curs.close()
-        if self.debug:
-            print("database::SELECT() result ** Fields: %s\nRecords: %s" % (fields, records))
-        return {"table": table, "fields": fields, "records": records}
-
-    def COMMIT(self):
-        # Commit the work
-        if not self.noaction:
-            self.conn.commit()
-
-    def ROLLBACK(self):
-        # Abort / rollback the current work
-        if not self.noaction:
-            self.conn.rollback()
-
-
-    def GetValue(self, dbres, recidx, field):
-        "Helper function to easy extract a field from a record set"
-
-        # Check that input data good
-        if type(dbres) is not dict:
-            raise AttributeError('Database result parameter is not a Python dict')
-
-        try:
-            dbres['table']
-            dbres['fields']
-            dbres['records']
-        except KeyError as err:
-            raise KeyError("Database result parameter do not contain a required element: %s").with_traceback(str(err))
-
-        if type(dbres['fields']) is not list:
-            raise AttributeError("The 'fields' element is not a list of fields")
-
-        if type(dbres['records']) is not list:
-            raise AttributeError("The 'records' element is not a list of fields")
-
-        # Return None when we're going out of boundaries
-        if recidx >= len(dbres['records']):
-            return None
-
-        if type(field) == bytes:
-            # Find the field index of the field name in the records set
-            try:
-                fidx = dbres['fields'].index(field)
-            except ValueError:
-                raise Exception("Field '%s' is not found in the database result" % field)
-        elif type(field) == int:
-            # If the field value is integer, assume it is the numeric field id
-            if field >= len(dbres['fields']):
-                raise Exception("Field id '%i' is too high.  No field available" % field)
-            fidx = field
-
-        # Return the value
-        return dbres['records'][recidx][fidx]
-
-
-    def NumTuples(self, dbres):
-        # Check that input data good
-        if type(dbres) is not dict:
-            raise AttributeError('Database result parameter is not a Python dict')
-
-        try:
-            dbres['table']
-            dbres['fields']
-            dbres['records']
-        except KeyError as err:
-            raise KeyError("Database result parameter do not contain a required element: %s").with_traceback(str(err))
-
-        if type(dbres['records']) is not list:
-            raise AttributeError("The 'records' element is not a list of fields")
-
-        return len(dbres['records'])
diff --git a/server/gen_config.sh b/server/gen_config.sh
deleted file mode 100755
index 335176f..0000000
--- a/server/gen_config.sh
+++ /dev/null
@@ -1,14 +0,0 @@ 
-#/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-APACHECONF="$1"
-INSTALLDIR="$2"
-
-echo "Creating Apache config file: apache-rteval.conf"
-escinstpath="$(echo ${INSTALLDIR} | sed -e 's/\//\\\\\//g')"
-expr=$(echo "s/{_INSTALLDIR_}/${escinstpath}/")
-eval "sed -e ${expr} ${APACHECONF}.tpl" > apache-rteval.conf
-echo "Copy the apache apache-rteval.conf into your Apache configuration"
-echo "directory and restart your web server"
-echo
-
diff --git a/server/parser/Makefile.am b/server/parser/Makefile.am
deleted file mode 100644
index 02b3326..0000000
--- a/server/parser/Makefile.am
+++ /dev/null
@@ -1,30 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#   Makefile.am - autotools configuration file
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-# Generic include files, found by ./configure
-AM_CPPFLAGS = $(LIBXML2_INC) $(LIBXSLT_INC) $(LIBPQ_INC) -std=gnu89
-
-# What is required to build rteval_parserd
-bin_PROGRAMS = rteval-parserd
-rteval_parserd_SOURCES = argparser.c argparser.h 			 \
-	configparser.c configparser.h 					 \
-	eurephia_nullsafe.c eurephia_nullsafe.h eurephia_values_struct.h \
-	eurephia_values.c eurephia_values.h 				 \
-	eurephia_xml.c eurephia_xml.h 					 \
-	log.c log.h  							 \
-	parsethread.c parsethread.h threadinfo.h			 \
-	pgsql.c pgsql.h 						 \
-	sha1.c sha1.h							 \
-	xmlparser.c xmlparser.h	             				 \
-	rteval-parserd.c statuses.h
-
-# Don't build, only install
-xsltdir=$(datadir)/rteval
-dist_xslt_DATA = xmlparser.xsl
-
-# Copy init script and config file example to the docs dir
-initscriptdir=$(docdir)/initscripts
-dist_initscript_DATA = rteval-parserd.init rteval-parserd.sysconfig
diff --git a/server/parser/README.parser b/server/parser/README.parser
deleted file mode 100644
index 2618552..0000000
--- a/server/parser/README.parser
+++ /dev/null
@@ -1,204 +0,0 @@ 
-**
-**  rteval-parsed - the rteval XML report parser
-**
-
-The purpose of the daemon is to off load the web server from the heavy duty
-work of parsing and processing the rteval XML reports.  The XML-RPC server
-will receive the reports and put the files in a queue directory on the
-file system and register the the submission in the database.  This will notify
-the rteval-parsed that a new report has been received and it will start
-processing that file independently of the web/XML-RPC server.
-
-
-** Installing the software
-
-  !! Please install also the rteval-xmlrpc package and read the !!
-  !! README.xmlrpc file also for setting up and preparing the   !!
-  !! database which the rteval-parserd program will be using.   !!
-  !! This file will also contain information regardingupgrading !!
-  !! the database.                                              !!
-
-When installing this application from a binary package, like RPM
-files on Fedora/RHEL based boxes, you should have the rteval-parserd
-in your $PATH.  Otherwise, when installing from sources, the configure
-script defines the default paths.
-
-
-** Configure rteval-parsed
-
-When starting the rteval-parserd via the init.d script (or via the 'service'
-command on RHEL/Fedora distributions) it will use the values configured in
-/etc/sysconfig/rteval-parserd.
-
-The available parameters are:
-
-    - NUM_THREADS
-      When this is not defined, the default behaviour is to use the number
-      of available CPU cores.  The init.d script will detect this
-      automatically.
-
-    - LOG
-      This defines how logging will be done.  See the rteval-parserd
-      arguments description further down in the document for more
-      information.
-
-    - LOGLEVEL
-      Defines how verbose the logging will be.  See the rteval-parserd
-      arguments description further down in the document for more
-      information.
-
-    - CONFIGFILE
-      The default configuration file rteval-parserd will try to read is
-      /etc/rteval.conf.  See the next paragraph for more information about
-      this file.  This argument let you override the default config file.
-
-    - PIDFILE
-      Defines where the init.d script will put the PID file for the
-      rteval-parserd process.  The default is /var/run/rteval-parserd.pid
-
-This daemon uses the same configuration file as the rest of the rteval program
-suite, /etc/rteval.conf.  It will parse the section named 'xmlrpc_parser'.
-
-The default values are:
-
-  - xsltpath: /usr/share/rteval
-    Defines where it can find the xmlparser.xsl XSLT template
-
-  - db_server: localhost
-    Which database server to connect to
-
-  - db_port: 5432
-    Which port to use for the database connection
-
-  - database: rteval
-    Which database to make use of.
-
-  - db_username: rtevparser
-    Which user name to use for the connection
-
-  - db_password: rtevaldb_parser
-    Which password to use for the authentication
-
-  - reportdir: /var/lib/rteval/report
-    Where to save the parsed reports
-
-  - threads: 4
-    Number of worker threads.  This defines how many reports you will
-    process in parallel.  The recommended number here is the number
-    of available CPU cores, as having a higher thread number often
-    punishes the performance.  The default value is 4 when rteval-parserd
-    is started directly.  When started via the init.d script, the default
-    is to start one thread per CPU core.
-
-  - max_report_size: 2097152
-    Maximum file size of reports which the parser will process.  The
-    default value is 2MB.  The value must be given in bytes.  Remember
-    that this value is per thread, and that XML and XSLT processing can
-    be quite memory hungry.  If this value is set too high or you have too
-    many worker threads, your system might become unresponsive for a while
-    and the parser might be killed by the kernel (OOM).
-
-  - measurement_tables: cyclic_statistics, cyclic_histogram, hwlatdetect_summary, hwlatdetect_samples
-    Declares which measurement results will be parsed and stored in the
-    database.  These names are referring to table definitions in the
-    xmlparser.xsl XSLT template.  The definitions in this template tells
-    rteval-parsed which data to extract from the rteval summary.xml report
-    and where and how to store it in the database.
-
-
-** rteval-parserd arguments
-
-  -d | --daemon                    Run as a daemon
-  -l | --log        <log dest>     Where to put log data
-  -L | --log-level  <verbosity>    What to log
-  -f | --config     <config file>  Which configuration file to use
-  -t | --threads    <num. threads> How many worker threads to start (def: 4)
-  -h | --help                      This help screen
-
-- Configuration file
-By default the program will look for /etc/rteval.conf.  This can be
-overridden by using --config <config file>.
-
-- Logging
-When the program is started as a daemon, it will log to syslog by default.
-The default log level is 'info'.  When not started as a daemon, all logging
-will go to stderr by default.
-
-The --log argument takes either 'destination' or a file name.  Unknown
-destinations are treated as filenames.  Valid 'destinations' are:
-
-    stderr:             - Log to stderr
-    stdout:             - Log to stdout
-    syslog:[facility]   - Log to syslog
-    <file name>         - Log to given file
-
-For syslog the default facility is 'daemon', but can be overridden by using
-one of the following facility values:
-    daemon, user and local0 to local7
-
-Log verbosity is set by the --log-level.  The valid values here are:
-
-    emerg, emergency    - Only log errors which causes the program to stop
-    alert               - Incidents which needs immediate attention
-    crit, critical      - Unexpected incidents which is not urgent
-    err, error          - Parsing errors.  Issues with input data
-    warn, warning       - Incidents which may influence performance
-    notice              - Less important warnings
-    info                - General run information
-    debug               - Detailed run information, incl. thread operation
-
-- Threads
-By default, the daemon will use five threads.  One for the main threads which
-processes the submission queue and notifies the working threads.  The four
-other threads are worker threads, which will process the received reports.
-
-Each of the worker threads will have its own connection to the database.  This
-connection will be connected to the database as long as the daemon is running.
-It is therefore important that you do not have more worker threads than
-available database connections.
-
-
-** POSIX Message Queue
-
-The daemon makes use of POSIX MQ for distributing work to the worker threads.
-Each thread lives independently and polls the queue regularly for more work.
-As the POSIX MQ has a pretty safe mechanism of not duplicating messages in the
-implementation, no other locking facility is needed.
-
-On Linux, the default value for maximum messages in the queue are set to 10.
-If you receive a lot of reports and the threads do not process the queue
-quickly enough, it will fill up pretty quickly.  If the queue is filled up,
-the main thread which populates the message queue will politely go to sleep
-for one minute before attempting to send new messages.  To avoid this, consider
-to increase the queue size by modifying /proc/sys/fs/mqueue/msg_max.
-
-When the daemon initialises itself, it will read this file to make sure it
-uses the queue to the maximum, but not beyond that.
-
-
-** PostgreSQL features
-
-The daemon depends on the PostgreSQL database.  It is written with an
-abstraction layer so it should, in theory, be possible to easily adopt it to
-different database implementation.
-
-In the current implementation, it makes use of PostgreSQL's LISTEN, NOTIFY and
-UNLISTEN features.  A trigger is enabled on the submission queue table, which
-sends a NOTIFY whenever a record is inserted into the table.  The rteval-parser
-daemon listens for these notifications, and will immediately poll the table
-upon such a notification.
-
-Whenever a notification is received, it will always parse all unprocessed
-reports.  In addition it will also only listen for notifications when there
-are no unprocessed reports.
-
-The core PostgreSQL implementation is only done in pgsql.[ch], which provides an
-abstract API layer for the rest of the parser daemon.
-
-
-** Submission queue status codes
-
-In the rteval database's submissionqueue table there is a status field.  The
-daemon will only consider records with status == 0 for processing.  It do not
-consider any other fields.  For a better understanding of the different status
-codes, look into the file statuses.h.
diff --git a/server/parser/argparser.c b/server/parser/argparser.c
deleted file mode 100644
index 70d6961..0000000
--- a/server/parser/argparser.c
+++ /dev/null
@@ -1,140 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   argparser.c
- * @author David Sommerseth <davids@redhat.com>
- * @date   Thu Oct 22 13:58:46 2009
- *
- * @brief  Generic argument parser
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <getopt.h>
-#include <eurephia_values.h>
-#include <eurephia_nullsafe.h>
-
-
-/**
- * Print a help screen to stdout
- */
-void usage() {
-	printf("rteval-parserd:  Parses new reports recieved via XML-RPC\n"
-	       "\n"
-	       "This program will wait for changes to the rteval 'submissionqueue' table.\n"
-	       "When a new report is registered here, it will send this report to one of\n"
-	       "the worker threads which will insert the parsed result into the database.\n"
-	       "\n"
-	       "** Program arguments:\n"
-	       "  -d | --daemon                    Run as a daemon\n"
-	       "  -l | --log        <log dest>     Where to put log data\n"
-	       "  -L | --log-level  <verbosity>    What to log\n"
-	       "  -f | --config     <config file>  Which configuration file to use\n"
-	       "  -t | --threads    <num. threads> How many worker threads to start (def: 4)\n"
-	       "  -h | --help                      This help screen\n"
-	       "\n"
-	       "** Configuration file\n"
-	       "By default the program will look for /etc/rteval.conf.  This can be\n"
-	       "overriden by using --config <config file>.\n"
-	       "\n"
-	       "** Logging\n"
-	       "When the program is started as a daemon, it will log to syslog by default.\n"
-	       "The default log level is 'info'.  When not started as a daemon, all logging\n"
-	       "will go to stderr by default.\n"
-	       "\n"
-	       "The --log argument takes either 'destination' or a file name.  Unknown\n"
-	       "destinations are treated as filenames.  Valid 'destinations' are:\n"
-	       "\n"
-	       "    stderr:             - Log to stderr\n"
-	       "    stdout:             - Log to stdout\n"
-	       "    syslog:[facility]   - Log to syslog\n"
-	       "    <file name>         - Log to given file\n"
-	       "\n"
-	       "For syslog the default facility is 'daemon', but can be overriden by using\n"
-	       "one of the following facility values:\n"
-	       "    daemon, user and local0 to local7\n"
-	       "\n"
-	       "Log verbosity is set by the --log-level.  The valid values here are:\n"
-	       "\n"
-	       "    emerg, emergency    - Only log errors which causes the program to stop\n"
-	       "    alert               - Incidents which needs immediate attention\n"
-	       "    crit, critical      - Unexpected incidents which is not urgent\n"
-	       "    err, error          - Parsing errors.  Issues with input data\n"
-	       "    warn, warning       - Incidents which may influence performance\n"
-	       "    notice              - Less important warnings\n"
-	       "    info                - General run information\n"
-	       "    debug               - Detailed run information, incl. thread operations\n"
-	       "\n"
-	       );
-}
-
-
-/**
- * Parses program arguments and puts the recognised arguments into an eurephiaVALUES struct.
- *
- * @param argc   argument counter
- * @param argv   argument string table
- *
- * @return Returns a pointer to an eurephiaVALUES struct.  On failure, the program halts.
- */
-eurephiaVALUES *parse_arguments(int argc, char **argv) {
-	eurephiaVALUES *args = NULL;
-	int optidx, c;
-	static struct option long_opts[] = {
-		{"log", 1, 0, 'l'},
-		{"log-level", 1, 0, 'L'},
-		{"config", 1, 0, 'f'},
-		{"threads", 1, 0, 't'},
-		{"daemon", 0, 0, 'd'},
-		{"help", 0, 0, 'h'},
-		{0, 0, 0, 0}
-	};
-
-	args = eCreate_value_space(NULL, 21);
-	eAdd_value(args, "daemon", "0");
-	eAdd_value(args, "configfile", "/etc/rteval.conf");
-	eAdd_value(args, "threads", "4");
-
-	while( 1 ) {
-		optidx = 0;
-		c = getopt_long(argc, argv, "l:L:f:t:dh", long_opts, &optidx);
-		if( c == -1 ) {
-			break;
-		}
-
-		switch( c ) {
-		case 'l':
-			eUpdate_value(args, "log", optarg, 1);
-			break;
-		case 'L':
-			eUpdate_value(args, "loglevel", optarg, 1);
-			break;
-		case 'f':
-			eUpdate_value(args, "configfile", optarg, 0);
-			break;
-		case 't':
-			eUpdate_value(args, "threads", optarg, 0);
-			break;
-		case 'd':
-			eUpdate_value(args, "daemon", "1", 0);
-			break;
-		case 'h':
-			usage();
-			exit(0);
-		}
-	}
-
-	// If logging is not configured, and it is not run as a daemon
-	// -> log to stderr:
-	if( (eGet_value(args, "log") == NULL)
-	    && (atoi_nullsafe(eGet_value(args, "daemon")) == 0) ) {
-		eAdd_value(args, "log", "stderr:");
-	}
-
-	return args;
-}
diff --git a/server/parser/argparser.h b/server/parser/argparser.h
deleted file mode 100644
index 5325505..0000000
--- a/server/parser/argparser.h
+++ /dev/null
@@ -1,21 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   argparser.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   Thu Oct 22 13:58:46 2009
- *
- * @brief  Generic argument parser
- *
- */
-
-#ifndef _RTEVAL_ARGPARSER_h
-#define _RTEVAL_ARGPARSER_h
-
-eurephiaVALUES *parse_arguments(int argc, char **argv);
-
-#endif
diff --git a/server/parser/configparser.c b/server/parser/configparser.c
deleted file mode 100644
index 4eaf318..0000000
--- a/server/parser/configparser.c
+++ /dev/null
@@ -1,171 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*  configparser.c - Read and parse config files
- *
- *  This code is based on the fragments from the eurephia project.
- *
- *  GPLv2 Copyright (C) 2009
- *  David Sommerseth <davids@redhat.com>
- *
- */
-
-/**
- * @file   configparser.c
- * @author David Sommerseth <davids@redhat.com>
- * @date   2009-10-01
- *
- * @brief  Config file parser
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <assert.h>
-
-#include <eurephia_nullsafe.h>
-#include <eurephia_values.h>
-#include <configparser.h>
-#include <log.h>
-
-/**
- * Parse one single configuration line into a eurephiaVALUES key/value pair.  It will also ignore
- * comment lines, and also remove the comments on the line of the configuration line so that only
- * the key/value information is extracted.
- *
- * @param line Input configuration line
- *
- * @return eurephiaVALUES pointer containing the parsed result.  On error or if no valid config
- * line was found, NULL is returned.
- */
-static inline eurephiaVALUES *parse_config_line(LogContext *log, const char *line) {
-        char *cp = NULL, *key = NULL, *val = NULL, *ptr = NULL;;
-        eurephiaVALUES *ret = NULL;
-
-        if( *line == '#' ) {
-                return NULL;
-        }
-
-        cp = strdup(line);
-        key = cp;
-        val = strpbrk(cp, "=:");
-        if( val == NULL ) {
-                free_nullsafe(cp);
-                return NULL;
-        }
-        *val = '\0'; val++;
-
-        // Discard comments at the end of a line
-        if( (ptr = strpbrk(val, "#")) != NULL ) {
-                *ptr = '\0';
-        }
-
-        // Left trim
-        while( ((*key == 0x20) || (*key == 0x0A) || (*key == 0x0D)) ) {
-                key++;
-        }
-        while( ((*val == 0x20) || (*val == 0x0A) || (*val == 0x0D)) ) {
-                val++;
-        }
-
-        // Right trim
-        ptr = key + strlen_nullsafe(key) - 1;
-        while( ((*ptr == 0x20) || (*ptr == 0x0A) || (*ptr == 0x0D)) && (ptr > key) ) {
-                ptr--;
-        }
-        ptr++;
-        *ptr = '\0';
-
-        ptr = val + strlen_nullsafe(val) - 1;
-        while( ((*ptr == 0x20) || (*ptr == 0x0A) || (*ptr == 0x0D)) && (ptr > val) ) {
-                ptr--;
-        }
-        ptr++;
-        *ptr = '\0';
-
-        // Put key/value into a eurephiaVALUES struct and return it
-        ret = eCreate_value_space(log, 20);
-        ret->key = strdup(key);
-        ret->val = strdup(val);
-
-        free_nullsafe(cp);
-        return ret;
-}
-
-
-static inline eurephiaVALUES *default_cfg_values(LogContext *log, eurephiaVALUES *prgargs) {
-	eurephiaVALUES *cfg = NULL, *ptr = NULL;
-
-	cfg = eCreate_value_space(log, 20);
-	eAdd_value(cfg, "datadir", "/var/lib/rteval");
-	eAdd_value(cfg, "xsltpath", "/usr/share/rteval");
-	eAdd_value(cfg, "db_server", "localhost");
-	eAdd_value(cfg, "db_port", "5432");
-	eAdd_value(cfg, "database", "rteval");
-	eAdd_value(cfg, "db_username", "rtevparser");
-	eAdd_value(cfg, "db_password", "rtevaldb_parser");
-	eAdd_value(cfg, "reportdir", "/var/lib/rteval/reports");
-	eAdd_value(cfg, "max_report_size", "2097152"); // 2MB
-	eAdd_value(cfg, "measurement_tables", "cyclic_statistics, cyclic_histogram, hwlatdetect_summary, hwlatdetect_samples");
-
-	// Copy over the arguments to the config, update existing settings
-	for( ptr = prgargs; ptr; ptr = ptr->next ) {
-		eUpdate_value(cfg, ptr->key, ptr->val, 1);
-	}
-
-	return cfg;
-}
-
-/**
- * Parses a section of a config file and puts it into an eurephiaVALUES key/value stack
- *
- * @param log     Initialised log context
- * @param prgargs Parsed command line arguments (see parse_arguments())
- * @param section Section to read from the config file
- *
- * @return Returns a pointer to an eurephiaVALUES stack containing the configuration on success,
- *         otherwise NULL.
- */
-eurephiaVALUES *read_config(LogContext *log, eurephiaVALUES *prgargs, const char *section) {
-        FILE *fp = NULL;
-        char  *buf = NULL, *sectmatch = NULL, *cfgname = NULL;
-	int sectfound = 0;
-        eurephiaVALUES *cfg = NULL;
-        struct stat fi;
-
-	cfgname = eGet_value(prgargs, "configfile");
-        if( stat(cfgname, &fi) == -1 ) {
-		writelog(log, LOG_EMERG, "Could not open the config file: %s", cfgname);
-                return NULL;
-        }
-
-        if( (fp = fopen(cfgname, "r")) == NULL ) {
-                writelog(log, LOG_EMERG, "Could not open the config file: %s", cfgname);
-                return NULL;
-        }
-
-        buf = (char *) malloc_nullsafe(log, fi.st_size+2);
-	sectmatch = (char *) malloc_nullsafe(log, strlen_nullsafe(section)+4);
-	sprintf(sectmatch, "[%s]", section);
-
-        cfg = default_cfg_values(log, prgargs);
-	writelog(log, LOG_DEBUG, "Reading config file: %s", cfgname);
-        while( fgets(buf, fi.st_size, fp) != NULL ) {
-		if( strncmp(buf, "[", 1) == 0 ) {
-			sectfound = (!sectfound && (strncmp(buf, sectmatch, strlen(sectmatch)) == 0));
-			continue;
-		}
-
-		if( sectfound ) {
-			eurephiaVALUES *prm = parse_config_line(log, buf);
-			if( prm != NULL ) {
-				cfg = eUpdate_valuestruct(cfg, prm, 1);
-			}
-		}
-        };
-        free_nullsafe(buf);
-	free_nullsafe(sectmatch);
-        fclose(fp); fp = NULL;
-
-        return cfg;
-}
diff --git a/server/parser/configparser.h b/server/parser/configparser.h
deleted file mode 100644
index 033ae26..0000000
--- a/server/parser/configparser.h
+++ /dev/null
@@ -1,25 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*  configparser.h - Read and parse config files
- *
- *  This code is based on the fragments from the eurephia project.
- *
- *  GPLv2 Copyright (C) 2009
- *  David Sommerseth <davids@redhat.com>
- *
- */
-
-/**
- * @file   configparser.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   2009-10-01
- *
- * @brief  Config file parser
- *
- */
-
-#ifndef _CONFIGPARSER_H
-#define _CONFIGPARSER_H
-
-eurephiaVALUES *read_config(LogContext *log, eurephiaVALUES *prgargs, const char *section);
-
-#endif
diff --git a/server/parser/eurephia_nullsafe.c b/server/parser/eurephia_nullsafe.c
deleted file mode 100644
index 5abda69..0000000
--- a/server/parser/eurephia_nullsafe.c
+++ /dev/null
@@ -1,54 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/* eurephia_nullsafe.c
- *
- *  standard C string functions, which is made NULL safe by checking
- *  if input value is NULL before performing the action.
- *
- *  This version is modified to work outside the eurephia project.
- *
- *  GPLv2 only - Copyright (C) 2009
- *               David Sommerseth <dazo@users.sourceforge.net>
- *
- */
-
-/**
- * @file   eurephia_nullsafe.c
- * @author David Sommerseth <dazo@users.sourceforge.net>
- * @date   2009-09-07
- *
- * @brief standard C string functions, which is made NULL safe by checking
- *        if input value is NULL before performing the action.
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include <log.h>
-
-#if __GNUC__ >= 3
-#define __malloc__ __attribute__((malloc))
-#else /* If not GCC 3 or newer, disable optimisations */
-#define __malloc__
-#endif
-
-/**
- * This replaces the use of malloc() and memset().  This function uses calloc
- * internally, which results in the memory region being zero'd by the kernel
- * on memory allocation.
- *
- * @param log   Log context
- * @param sz    size of the memory region being allocated
- *
- * @return Returns a void pointer to the memory region on success, otherwise NULL
- */
-__malloc__ void *malloc_nullsafe(LogContext *log, size_t sz) {
-        void *buf = NULL;
-
-        buf = calloc(1, sz);    /* Using calloc, also gives a zero'd memory region */
-        if( !buf ) {
-		writelog(log, LOG_EMERG, "Could not allocate memory region for %ld bytes", sz);
-		exit(9);
-        }
-        return buf;
-}
diff --git a/server/parser/eurephia_nullsafe.h b/server/parser/eurephia_nullsafe.h
deleted file mode 100644
index 00e6188..0000000
--- a/server/parser/eurephia_nullsafe.h
+++ /dev/null
@@ -1,103 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* eurephia_nullsafe.h
- *
- *  standard C string functions, which is made NULL safe by checking
- *  if input value is NULL before performing the action.
- *
- *  This version is modified to work outside the eurephia project.
- *
- *  GPLv2 only - Copyright (C) 2008, 2009
- *               David Sommerseth <dazo@users.sourceforge.net>
- *
- */
-
-/**
- * @file   eurephia_nullsafe.h
- * @author David Sommerseth <dazo@users.sourceforge.net>
- * @date   2008-08-06
- *
- * @brief standard C string functions, which is made NULL safe by checking
- *        if input value is NULL before performing the action.
- *
- */
-
-#ifndef   	EUREPHIA_NULLSAFE_H_
-#define    	EUREPHIA_NULLSAFE_H_
-
-#include <log.h>
-
-/**
- * atoi() wrapper.  Converts any string into a integer
- *
- * @param str Input string
- *
- * @return Returns integer
- */
-#define atoi_nullsafe(str) (str != NULL ? atoi(str) : 0)
-
-
-/**
- * strdup() wrapper.  Duplicates the input string.
- *
- * @param str Input string to be duplicated
- *
- * @return Returns a pointer to the duplicate (char *) on success, NULL otherwise.
- * If input was NULL, NULL is returned.
- */
-#define strdup_nullsafe(str) (str != NULL ? strdup(str) : NULL)
-
-
-/**
- * Wrapper macro, which appends a string to a destination string without exceeding the size
- * of the destination buffer.
- *
- * @param dest Pointer to the destination buffer
- * @param src  Pointer to the value being concatenated to the destination string.
- * @param size Size of the destination buffer
- */
-#define append_str(dest, src, size) strncat(dest, src, (size - strlen_nullsafe(dest)))
-
-
-/**
- * strlen() wrapper.  Returns the length of a string
- *
- * @param str Input string
- *
- * @return Returns int with length of string.  If input is NULL, it returns 0.
- */
-#define strlen_nullsafe(str) (str != NULL ? strlen(str) : 0)
-
-
-void *malloc_nullsafe(LogContext *, size_t);
-
-/**
- * Null safe free().  It will not attempt to free a pointer which is NULL.
- *
- * @param ptr Pointer to the memory region being freed.
- *
- */
-#define free_nullsafe(ptr) if( ptr ) { free(ptr); ptr = NULL; }
-
-
-/**
- * Function which will return a default string value if no input data was provided.
- *
- * @param str     Input string
- * @param defstr  Default string
- *
- * @return Returns the pointer to the input string if the string length > 0.  Otherwise it
- * will return a pointer to the default string.
- */
-#define defaultValue(str, defstr) (strlen_nullsafe(str) == 0 ? defstr : str)
-
-
-/**
- * Function which will return a default integer value if no input data was provided.
- *
- * @param ival   input integer value
- * @param defval default integer value
- *
- * @return Returns the ival value if it is > 0, otherwise defval value is returned.
- */
-#define defaultIntValue(ival, defval) (ival == 0 ? defval : ival)
-#endif 	    /* !EUREPHIA_NULLSAFE_H_ */
diff --git a/server/parser/eurephia_values.c b/server/parser/eurephia_values.c
deleted file mode 100644
index 8f3645a..0000000
--- a/server/parser/eurephia_values.c
+++ /dev/null
@@ -1,301 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/* eurephia_values.c  --  Generic interface for processing key->value pairs
- *
- * This version is modified to work outside the eurephia project.
- *
- *  GPLv2 only - Copyright (C) 2008
- *               David Sommerseth <dazo@users.sourceforge.net>
- *
- */
-
-/**
- * @file   eurephia_values.c
- * @author David Sommerseth <dazo@users.sourceforge.net>
- * @date   2008-08-06
- *
- * @brief  Generic interface for handling key->value pairs
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include <eurephia_nullsafe.h>
-#include <eurephia_values_struct.h>
-
-
-
-/**
- * Function for freeing up an eurephiaVALUES stack.  This function is normally not called
- * directly, but usually via the eFree_values(...) macro.
- *
- * @param vls  Pointer to a eurephiaVALUES stack to be freed.
- */
-void eFree_values_func(eurephiaVALUES *vls) {
-	eurephiaVALUES *ptr = NULL, *ptr_next = NULL;
-
-	ptr = vls;
-	while( ptr ) {
-		free_nullsafe(ptr->key);
-		free_nullsafe(ptr->val);
-
-		ptr_next = ptr->next;
-		free_nullsafe(ptr);
-		ptr = ptr_next;
-	}
-}
-
-
-/**
- * Retrieve an eurephiaVALUES element for a given value key
- *
- * @param vls  Pointer to the eurephiaVALUES stack where to search for the element
- * @param key  String containing the key name of the value requested.
- *
- * @return Returns an eurephiaVALUES element on success, otherwise NULL.
- */
-eurephiaVALUES *eGet_valuestruct(eurephiaVALUES *vls, const char *key)
-{
-        eurephiaVALUES *ptr = NULL;
-
-        if( (vls == NULL) || (key == NULL) ) {
-                return NULL;
-        }
-
-        ptr = vls;
-        while( ptr != NULL ) {
-                if( (ptr->key != NULL) && (strcmp(key, ptr->key) == 0) ) {
-                        return ptr;
-                }
-                ptr = ptr->next;
-        }
-        return NULL;
-}
-
-
-/**
- * Retrieves the value of a given key from an eurephiaVALUES stack.
- *
- * @param vls  Pointer to an eurephiaVALUES stack where to search for the value
- * @param key  String containing the key name of the value requested
- *
- * @return Returns a string (char *) with the requested value if found, otherwise NULL.
- */
-char *eGet_value(eurephiaVALUES *vls, const char *key)
-{
-        eurephiaVALUES *ptr = NULL;
-
-        ptr = eGet_valuestruct(vls, key);
-        return (ptr != NULL ? ptr->val : NULL);
-}
-
-
-/**
- * Creates a new eurephiaVALUES stack
- *
- * @param log   Log context
- * @param evgid  int value, giving the stack an ID number.  Useful when looking through log files later on.
- *
- * @return Returns an empty eurephiaVALUES struct on success, otherwise NULL.
- */
-eurephiaVALUES *eCreate_value_space(LogContext *log, int evgid)
-{
-        eurephiaVALUES *ptr = NULL;
-
-        ptr = (eurephiaVALUES *) malloc_nullsafe(log, sizeof(eurephiaVALUES) + 2);
-	ptr->log = log;
-        ptr->evgid = evgid;
-        return ptr;
-}
-
-
-/**
- * Adds a new eurephiaVALUES stack to another eurephiaVALUES stack.  If the evgid value differs, it will
- * be overwritten with the value of the destination stack.
- *
- * @param vls    Destination eurephiaVALUES stack
- * @param newval Source eurephiaVALUES stack
- */
-void eAdd_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval) {
-        eurephiaVALUES *ptr = NULL;
-        int vid = 0;
-
-        assert(vls != NULL);
-
-        if( (vls->key == NULL) && (vls->val == NULL) && (vls->next == NULL) && (vls->evid == 0)) {
-                // Update header record if it is empty, by copying newval record.  Free newval afterwards
-                vls->key  = strdup(newval->key);
-                vls->val  = strdup(newval->val);
-                vls->evid = 0;
-                vls->next = NULL;
-                eFree_values_func(newval);
-        } else {
-                // Add values to the value chain, loop to the end and append it
-                ptr = vls;
-                while( ptr->next != NULL ) {
-                        ptr = ptr->next;
-                        vid = (vid > ptr->evid ? vid : ptr->evid);
-                }
-                newval->evid = vid+1;     // Increase the value counter
-                newval->evgid = ptr->evgid;
-                ptr->next = newval;
-        }
-}
-
-
-/**
- * Adds a new key/value pair to an eurephiaVALUES stack
- *
- * @param vls  Destination eurephiaVALUES stack
- * @param key  Key name for the value being stored
- * @param val  Value to be stored
- */
-void eAdd_value(eurephiaVALUES *vls, const char *key, const char *val)
-{
-        eurephiaVALUES *ptr = NULL;
-
-        assert(vls != NULL);
-
-        // Allocate buffer and save values
-        ptr = eCreate_value_space(vls->log, vls->evid);
-        if( ptr == NULL ) {
-		writelog(vls->log, LOG_EMERG, "Failed to add value to the value chain");
-		exit(9);
-        }
-        ptr->key = strdup_nullsafe(key);
-        ptr->val = strdup_nullsafe(val);
-        ptr->evgid = vls->evgid;
-
-        // Add value struct to the chain
-        eAdd_valuestruct(vls, ptr);
-}
-
-
-/**
- * Updates the value of a key in a values stack
- *
- * @param vls      eurephiaVALUES key/value stack to update
- * @param key      String with key name to update
- * @param newval   String with the new value
- * @param addunkn  Add unknown keys.  If set to 1, if the key is not found it will add a new key
- */
-void eUpdate_value(eurephiaVALUES *vls, const char *key, const char *newval, const int addunkn) {
-	eurephiaVALUES *ptr = NULL;
-
-	assert( (vls != NULL) && (key != NULL) );
-
-	ptr = eGet_valuestruct(vls, key);
-	if( ptr ) {
-		free_nullsafe(ptr->val);
-		ptr->val = strdup_nullsafe(newval);
-	} else if( addunkn == 1 ) {
-		eAdd_value(vls, key, newval);
-	}
-}
-
-
-/**
- * Updates a value struct element based on another value struct element contents (key/value)
- *
- * @param vls      eurephiaVALUES key/value stack to update
- * @param newval   eurephiaVALUES element with the new value
- * @param addunkn  Add unknown keys.  If set to 1, if the key is not found it will add a new key
- *
- * @return Returns a pointer to the first element in the chain.  If the element being updated
- *         was the first element in the old chain, the first element will be a new element with a
- *         new address.
- */
-eurephiaVALUES *eUpdate_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval, const int addunkn) {
-	eurephiaVALUES *ptr = NULL, *prevptr = NULL;
-
-	assert( (vls != NULL) && (newval != NULL) && (newval->key != NULL) );
-
-	prevptr = vls;
-	for( ptr = vls; ptr != NULL; ptr = ptr->next ) {
-                if( (ptr->key != NULL) && (strcmp(newval->key, ptr->key) == 0) ) {
-			newval->evgid = ptr->evgid;
-			newval->evid = ptr->evid;
-			newval->next = ptr->next;
-			ptr->next = NULL;
-			if( ptr == vls ) {
-				// If the element found is the first one, do special treatment
-				eFree_values_func(ptr);
-				return newval;
-			} else {
-				prevptr->next = newval;
-				eFree_values_func(ptr);
-				return vls;
-			}
-                }
-		prevptr = ptr;
-	}
-
-	if( addunkn == 1 ) {
-		eAdd_valuestruct(vls, newval);
-	}
-	return vls;
-}
-
-
-/**
- * Removes the key/value pair identified by evgid and evid from the given eurephiaVALUES chain
- *
- * @param vls    Pointer to an eurephiaVALUES chain with the data
- * @param evgid  Group ID of the chain
- * @param evid   Element ID of the chain element to be removed
- *
- * @return Returns a pointer to the chain.  The pointer is only changed if the first element in the
- *         chain is deleted
- */
-eurephiaVALUES *eRemove_value(eurephiaVALUES *vls, unsigned int evgid, unsigned int evid) {
-        eurephiaVALUES *ptr = NULL, *prev_ptr = NULL;
-        int found = 0;
-
-        // Find the value element
-        for( ptr = vls; ptr != NULL; ptr = ptr->next ) {
-                if( (ptr->evgid == evgid) && (ptr->evid == evid) ) {
-                        found = 1;
-                        break;
-                }
-                prev_ptr = ptr;
-        }
-
-        if( !found ) {
-                return vls;
-        }
-
-        if( ptr != vls ) {
-                prev_ptr->next = ptr->next;
-                ptr->next = NULL;
-                eFree_values_func(ptr);
-                return vls;
-        } else {
-                prev_ptr = ptr->next;
-                ptr->next = NULL;
-                eFree_values_func(ptr);
-                return prev_ptr;
-        }
-}
-
-
-/**
- * Counts number of elements in an eurephiaVALUES chain.
- *
- * @param vls eurephiaVALUES pointer to be counted
- *
- * @return Returns number of elements found.
- */
-unsigned int eCount(eurephiaVALUES *vls) {
-	eurephiaVALUES *ptr = NULL;
-	unsigned int c = 0;
-
-	if( vls == NULL ) {
-		return 0;
-	}
-	for(ptr = vls; ptr != NULL; ptr = ptr->next ) {
-		c++;
-	}
-	return c;
-}
diff --git a/server/parser/eurephia_values.h b/server/parser/eurephia_values.h
deleted file mode 100644
index 0daba4a..0000000
--- a/server/parser/eurephia_values.h
+++ /dev/null
@@ -1,48 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* eurephia_values.h  --  Generic interface for processing key->value pairs
- *
- * This version is modified to work outside the eurephia project.
- *
- *  GPLv2 only - Copyright (C) 2008
- *               David Sommerseth <dazo@users.sourceforge.net>
- *
- */
-
-/**
- * @file   eurephia_values.h
- * @author David Sommerseth <dazo@users.sourceforge.net>
- * @date   2008-08-06
- *
- * @brief  Generic interface for handling key->value pairs
- *
- */
-
-#include <eurephia_values_struct.h>
-
-#ifndef         EUREPHIA_VALUES_H_
-#define         EUREPHIA_VALUES_H_
-
-
-eurephiaVALUES *eGet_valuestruct(eurephiaVALUES *vls, const char *key);
-char *eGet_value(eurephiaVALUES *vls, const char *key);
-
-eurephiaVALUES *eCreate_value_space(LogContext *log, int evid);
-
-void eAdd_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval);
-void eAdd_value(eurephiaVALUES *vls, const char *key, const char *val);
-void eUpdate_value(eurephiaVALUES *vls, const char *key, const char *newval, const int addunkn);
-eurephiaVALUES *eUpdate_valuestruct(eurephiaVALUES *vls, eurephiaVALUES *newval, const int addunkn);
-eurephiaVALUES *eRemove_value(eurephiaVALUES *vls, unsigned int evgid, unsigned int evid);
-unsigned int eCount(eurephiaVALUES *vls);
-
-/**
- * Front-end function for eFree_values_func().  Frees eurephiaVALUES pointer chain and
- * sets the pointer to NULL.
- *
- * @param v eurephiaVALUES pointer which is being freed.
- *
- */
-#define eFree_values(v) { eFree_values_func(v); v = NULL; }
-void eFree_values_func(eurephiaVALUES *vls);
-
-#endif      /* !EUREPHIA_VALUES_H_ */
diff --git a/server/parser/eurephia_values_struct.h b/server/parser/eurephia_values_struct.h
deleted file mode 100644
index 6ea530a..0000000
--- a/server/parser/eurephia_values_struct.h
+++ /dev/null
@@ -1,38 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* eurephia_values.h  --  eurephiaVALUES struct typedef
- *
- *  GPLv2 only - Copyright (C) 2008
- *               David Sommerseth <dazo@users.sourceforge.net>
- *
- */
-
-/**
- * @file   eurephia_values_struct.h
- * @author David Sommerseth <dazo@users.sourceforge.net>
- * @date   2008-11-05
- *
- * @brief  Definition of the eurephiaVALUES struct
- *
- */
-
-#ifndef   	EUREPHIA_VALUES_STRUCT_H_
-# define   	EUREPHIA_VALUES_STRUCT_H_
-
-#include <log.h>
-
-/**
- * eurephiaVALUES is a pointer chain with key/value pairs.  If having several
- * such pointer chains, they can be given different group IDs to separate them,
- * which is especially useful during debugging.
- *
- */
-typedef struct __eurephiaVALUES {
-	LogContext *log;        /**< Pointer to an established log context, used for logging */
-        unsigned int evgid;	/**< Group ID, all elements in the same chain should have the same value */
-        unsigned int evid;	/**< Unique ID per element in a pointer chain */
-        char *key;		/**< The key name of a value */
-        char *val;		/**< The value itself */
-        struct __eurephiaVALUES *next; /**< Pointer to the next element in the chain. NULL == end of chain */
-} eurephiaVALUES;
-
-#endif 	    /* !EUREPHIA_VALUES_STRUCT_H_ */
diff --git a/server/parser/eurephia_xml.c b/server/parser/eurephia_xml.c
deleted file mode 100644
index 0679956..0000000
--- a/server/parser/eurephia_xml.c
+++ /dev/null
@@ -1,147 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/* eurephia_xml.c  --  Generic helper functions for XML parsing
- *
- * This version is modified to work outside the eurephia project.
- *
- *  GPLv2 only - Copyright (C) 2008, 2009
- *               David Sommerseth <dazo@users.sourceforge.net>
- *
- */
-
-/**
- * @file   eurephia_xml.c
- * @author David Sommerseth <dazo@users.sourceforge.net>
- * @date   2008-12-15
- *
- * @brief  Generic XML parser functions
- *
- *
- */
-
-#include <stdarg.h>
-#include <string.h>
-#include <assert.h>
-
-#include <libxml/tree.h>
-#include <libxml/xmlsave.h>
-#include <libxml/xmlstring.h>
-
-#include <eurephia_nullsafe.h>
-
-
-/**
- * Retrieves a given XML node attribute/property
- *
- * @param attr xmlAttr pointer from an xmlNode pointer.
- * @param key  The attribute name to search for
- *
- * @return The value of the found attribute.  If not found, NULL is returned.
- */
-char *xmlGetAttrValue(xmlAttr *attr, const char *key) {
-        xmlAttr *aptr;
-        xmlChar *x_key = NULL;
-
-        x_key = xmlCharStrdup(key);
-        assert( x_key != NULL );
-
-        for( aptr = attr; aptr != NULL; aptr = aptr->next ) {
-                if( xmlStrcmp(aptr->name, x_key) == 0 ) {
-                        free_nullsafe(x_key);
-                        return (char *)(aptr->children != NULL ? aptr->children->content : NULL);
-                }
-        }
-        free_nullsafe(x_key);
-        return NULL;
-}
-
-
-/**
- * Loops through a xmlNode chain to look for a given tag.  The search is not recursive.
- *
- * @param node xmlNode pointer where to look
- * @param key  the name of the XML tag to find
- *
- * @return xmlNode pointer to the found xmlNode.  NULL is returned if not found.
- */
-xmlNode *xmlFindNode(xmlNode *node, const char *key) {
-        xmlNode *nptr = NULL;
-        xmlChar *x_key = NULL;
-
-        if( (node == NULL) || (node->children == NULL) ) {
-                return NULL;
-        }
-
-        x_key = xmlCharStrdup(key);
-        assert( x_key != NULL );
-
-        for( nptr = node->children; nptr != NULL; nptr = nptr->next ) {
-                if( xmlStrcmp(nptr->name, x_key) == 0 ) {
-                        free_nullsafe(x_key);
-                        return nptr;
-                }
-        }
-        free_nullsafe(x_key);
-        return NULL;
-}
-
-
-/**
- * Return the text content of a given xmlNode
- *
- * @param n xmlNode to extract the value from.
- *
- * @return returns a char pointer with the text contents of an xmlNode.
- */
-inline char *xmlExtractContent(xmlNode *n) {
-        return (char *) (((n != NULL) && (n->children != NULL)) ? n->children->content : NULL);
-}
-
-
-/**
- * Get the text contents of a given xmlNode
- *
- * @param node An xmlNode pointer where to look for the contents
- * @param key  Name of the tag to retrieve the content of.
- *
- * @return Returns a string with the text content, if the node is found.  Otherwise, NULL is returned.
- */
-inline char *xmlGetNodeContent(xmlNode *node, const char *key) {
-        return xmlExtractContent(xmlFindNode(node, key));
-}
-
-
-/**
- * Serialises an xmlNode to a string
- *
- * @param log   Log context
- * @param node Input XML node to be serialised
- *
- * @return Returns a pointer to a new buffer containing the serialised data.  This buffer must be freed
- *         after usage
- */
-char *xmlNodeToString(LogContext *log, xmlNode *node) {
-	xmlBuffer *buf = NULL;
-	xmlSaveCtxt *serctx = NULL;
-	char *ret = NULL;
-
-	if( node == NULL ) {
-		writelog(log, LOG_ALERT, "xmlNodeToString: Input data is NULL");
-		return NULL;
-	}
-
-	buf = xmlBufferCreate();
-	assert( buf != NULL );
-
-	serctx = xmlSaveToBuffer(buf, "UTF-8", XML_SAVE_NO_EMPTY|XML_SAVE_NO_DECL);
-	assert( serctx != NULL );
-
-	if( xmlSaveTree(serctx, node) < 0 ) {
-		writelog(log, LOG_ALERT, "xmlNodeToString: Failed to serialise xmlNode");
-		return NULL;
-	}
-	xmlSaveClose(serctx);
-
-	ret = strdup_nullsafe((char *) xmlBufferContent(buf));
-	xmlBufferFree(buf);
-	return ret;
-}
diff --git a/server/parser/eurephia_xml.h b/server/parser/eurephia_xml.h
deleted file mode 100644
index 7bfffe8..0000000
--- a/server/parser/eurephia_xml.h
+++ /dev/null
@@ -1,43 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* eurephia_xml.h  --  Generic helper functions for XML parsing
- *
- * This version is modified to work outside the eurephia project.
- *
- *  GPLv2 only - Copyright (C) 2008
- *               David Sommerseth <dazo@users.sourceforge.net>
- *
- */
-
-/**
- * @file   eurephia_xml.h
- * @author David Sommerseth <dazo@users.sourceforge.net>
- * @date   2008-12-15
- *
- * @brief  Generic XML parser functions
- *
- */
-
-
-#ifndef   	EUREPHIA_XML_H_
-#define   	EUREPHIA_XML_H_
-
-#include <stdarg.h>
-
-#include <libxml/tree.h>
-
-/**
- * Simple iterator macro for iterating xmlNode pointers
- *
- * @param start  Pointer to an xmlNode where to start iterating
- * @param itn    An xmlNode pointer which will be used for the iteration.
- */
-#define foreach_xmlnode(start, itn)  for( itn = start; itn != NULL; itn = itn->next )
-
-char *xmlGetAttrValue(xmlAttr *properties, const char *key);
-xmlNode *xmlFindNode(xmlNode *node, const char *key);
-
-inline char *xmlExtractContent(xmlNode *n);
-inline char *xmlGetNodeContent(xmlNode *node, const char *key);
-char *xmlNodeToString(LogContext *log, xmlNode *node);
-
-#endif 	    /* !EUREPHIA_XML_H_ */
diff --git a/server/parser/log.c b/server/parser/log.c
deleted file mode 100644
index 9a21326..0000000
--- a/server/parser/log.c
+++ /dev/null
@@ -1,228 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   log.c
- * @author David Sommerseth <davids@redhat.com>
- * @date   Wed Oct 21 11:38:51 2009
- *
- * @brief  Generic log functions
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <assert.h>
-#include <stdarg.h>
-#include <pthread.h>
-#include <syslog.h>
-
-#include <eurephia_nullsafe.h>
-#include <log.h>
-
-/**
- * Maps defined log level strings into syslog
- * compatible LOG_* integer values
- */
-static struct {
-	const char *priority_str;
-	const int prio_level;
-} syslog_prio_map[] = {
-	{"emerg",     LOG_EMERG},
-	{"emergency", LOG_EMERG},
-	{"alert",     LOG_ALERT},
-	{"crit",      LOG_CRIT},
-	{"critical",  LOG_CRIT},
-	{"err",       LOG_ERR},
-	{"error",     LOG_ERR},
-	{"warning",   LOG_WARNING},
-	{"warn",      LOG_WARNING},
-	{"notice",    LOG_NOTICE},
-	{"info",      LOG_INFO},
-	{"debug",     LOG_DEBUG},
-	{NULL, 0}
-};
-
-
-/**
- * Initialises a log context.  It parses the log destination and log level and
- * prepares a context which can be used by writelog()
- *
- * @param logdest  String containing either syslog:[facility], stderr: or stdout:, or a file name.
- * @param loglvl   Defines the log level.  Can be one of the values defined in syslog_prio_map.
- *
- * @return Returns a pointer to a log context on success, otherwise NULL.
- */
-LogContext *init_log(const char *logdest, const char *loglvl) {
-	LogContext *logctx = NULL;
-	int i;
-
-	logctx = (LogContext *) calloc(1, sizeof(LogContext)+2);
-	assert( logctx != NULL);
-
-	logctx->logfp = NULL;
-
-	// Get the int value of the log level string
-	logctx->verbosity = -1;
-	if( loglvl ) {
-		for( i = 0; syslog_prio_map[i].priority_str; i++ ) {
-			if( strcasecmp(loglvl, syslog_prio_map[i].priority_str) == 0 ) {
-				logctx->verbosity = syslog_prio_map[i].prio_level;
-				break;
-			}
-		}
-	}
-
-	// If log level is not set, set LOG_INFo as default
-	if( logctx->verbosity == -1 ) {
-		logctx->verbosity = LOG_INFO;
-	}
-
-	if( logdest == NULL ) {
-		logctx->logtype = ltSYSLOG;
-		openlog("rteval-parserd", LOG_PID, LOG_DAEMON);
-	} else {
-		if( strncmp(logdest, "syslog:", 7) == 0 ) {
-			const char *fac = logdest+7;
-			int facid = LOG_DAEMON;
-
-			if( strcasecmp(fac, "local0") == 0 ) {
-				facid = LOG_LOCAL0;
-			} else if( strcasecmp(fac, "local1") == 0 ) {
-				facid = LOG_LOCAL1;
-			} else if( strcasecmp(fac, "local2") == 0 ) {
-				facid = LOG_LOCAL2;
-			} else if( strcasecmp(fac, "local3") == 0 ) {
-				facid = LOG_LOCAL3;
-			} else if( strcasecmp(fac, "local4") == 0 ) {
-				facid = LOG_LOCAL4;
-			} else if( strcasecmp(fac, "local5") == 0 ) {
-				facid = LOG_LOCAL5;
-			} else if( strcasecmp(fac, "local6") == 0 ) {
-				facid = LOG_LOCAL6;
-			} else if( strcasecmp(fac, "local7") == 0 ) {
-				facid = LOG_LOCAL7;
-			} else if( strcasecmp(fac, "user") == 0 ) {
-				facid = LOG_USER;
-			}
-			logctx->logtype = ltSYSLOG;
-			openlog("rteval-parserd", LOG_PID, facid);
-		} else if( strcmp(logdest, "stderr:") == 0 ) {
-			logctx->logtype = ltCONSOLE;
-			logctx->logfp = stderr;
-		} else if( strcmp(logdest, "stdout:") == 0 ) {
-			logctx->logtype = ltCONSOLE;
-			logctx->logfp = stdout;
-		} else {
-			logctx->logtype = ltFILE;
-			logctx->logfp = fopen(logdest, "a");
-			if( logctx->logfp == NULL ) {
-				fprintf(stderr, "** ERROR **  Failed to open log file %s: %s\n",
-					logdest, strerror(errno));
-				free_nullsafe(logctx);
-				return NULL;
-			}
-		}
-	}
-
-	if( logctx->logtype != ltSYSLOG ) {
-		static pthread_mutex_t mtx = PTHREAD_MUTEX_INITIALIZER;
-		logctx->mtx_log = &mtx;
-	}
-	return logctx;
-}
-
-
-/**
- * Tears down a log context.  Closes log files and releases memory used by the log context.
- *
- * @param lctx  Log context to close
- */
-void close_log(LogContext *lctx) {
-	if( !lctx ) {
-		return;
-	}
-
-	switch( lctx->logtype ) {
-	case ltFILE:
-		fclose(lctx->logfp);
-		break;
-
-	case ltSYSLOG:
-		closelog();
-		break;
-
-	case ltCONSOLE:
-		break;
-	}
-	free_nullsafe(lctx);
-}
-
-
-/**
- * Write data to the log.
- *
- * @param lctx    Log context, where the data will be logged
- * @param loglvl  Log level.  See the priorities for syslog(3) for valid values.
- * @param fmt     Data to be logged (stdarg)
- */
-void writelog(LogContext *lctx, unsigned int loglvl, const char *fmt, ... ) {
-	if( !lctx || !fmt ) {
-		return;
-	}
-
-	if( lctx->verbosity >= loglvl ) {
-		va_list ap;
-
-		va_start(ap, fmt);
-		switch( lctx->logtype ) {
-		case ltSYSLOG:
-			vsyslog(loglvl, fmt, ap);
-			break;
-
-		case ltCONSOLE:
-		case ltFILE:
-			pthread_mutex_lock(lctx->mtx_log);
-			switch( loglvl ) {
-			case LOG_EMERG:
-				fprintf(lctx->logfp, "**  EMERG  ERROR  ** ");
-				break;
-			case LOG_ALERT:
-				fprintf(lctx->logfp, "**  ALERT  ERROR  ** ");
-				break;
-			case LOG_CRIT:
-				fprintf(lctx->logfp, "** CRITICAL ERROR ** ");
-				break;
-			case LOG_ERR:
-				fprintf(lctx->logfp, "** ERROR ** ");
-				break;
-			case LOG_WARNING:
-				fprintf(lctx->logfp, "*WARNING* ");
-				break;
-			case LOG_NOTICE:
-				fprintf(lctx->logfp, "[NOTICE] ");
-				break;
-			case LOG_INFO:
-				fprintf(lctx->logfp, "[INFO]   ");
-				break;
-			case LOG_DEBUG:
-				fprintf(lctx->logfp, "[DEBUG]  ");
-				break;
-			}
-			vfprintf(lctx->logfp, fmt, ap);
-			fprintf(lctx->logfp, "\n");
-			pthread_mutex_unlock(lctx->mtx_log);
-
-			if( lctx->logtype == ltFILE ) {
-				fflush(lctx->logfp);
-			}
-			break;
-		}
-		va_end(ap);
-	}
-}
diff --git a/server/parser/log.h b/server/parser/log.h
deleted file mode 100644
index deeb784..0000000
--- a/server/parser/log.h
+++ /dev/null
@@ -1,43 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   log.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   Wed Oct 21 11:38:51 2009
- *
- * @brief  Generic log functions
- *
- */
-
-#ifndef _RTEVAL_LOG_H
-#define _RTEVAL_LOG_H
-
-#include <pthread.h>
-#include <syslog.h>
-
-/**
- * Supported log types
- */
-typedef enum { ltSYSLOG, ltFILE, ltCONSOLE } LogType;
-
-/**
- * The log context structure.  Keeps needed information for
- * a flawless logging experience :-P
- */
-typedef struct {
-	LogType logtype;           /**<  What kind of log "device" will be used */
-	FILE *logfp;               /**<  Only used if logging to stderr, stdout or a file */
-	unsigned int verbosity;    /**<  Defines which log level the user wants to log */
-	pthread_mutex_t *mtx_log;  /**<  Mutex to threads to write to a file based log in parallel */
-} LogContext;
-
-
-LogContext *init_log(const char *fname, const char *loglvl);
-void close_log(LogContext *lctx);
-void writelog(LogContext *lctx, unsigned int loglvl, const char *fmt, ... );
-
-#endif
diff --git a/server/parser/parsethread.c b/server/parser/parsethread.c
deleted file mode 100644
index b327e2d..0000000
--- a/server/parser/parsethread.c
+++ /dev/null
@@ -1,370 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   parsethread.c
- * @author David Sommerseth <davids@redhat.com>
- * @date   Thu Oct 15 11:52:10 2009
- *
- * @brief  Contains the "main" function which a parser threads runs
- *
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <pthread.h>
-#include <libgen.h>
-#include <errno.h>
-#include <assert.h>
-
-#include <eurephia_nullsafe.h>
-#include <parsethread.h>
-#include <pgsql.h>
-#include <log.h>
-#include <threadinfo.h>
-#include <statuses.h>
-
-
-/**
- * Does the same job as 'mkdir -p', but it expects a complete filename as input, and it will
- * extract the directory path from that filename
- *
- * @param fname  Full filename containing the directory the report will reside.
- *
- * @return Returns 1 on success, otherwise -1
- */
-static int make_report_dir(LogContext *log, const char *fname) {
-	char *fname_cp = NULL, *dname = NULL, *chkdir = NULL;
-	char *tok = NULL, *saveptr = NULL;
-	int ret = 0;
-	struct stat info;
-
-	if( !fname ) {
-		return 0;
-	}
-
-	fname_cp = strdup(fname);
-	assert( fname_cp != NULL );
-	dname = dirname(fname_cp);
-	chkdir = malloc_nullsafe(log, strlen(dname)+8);
-
-	if( dname[0] == '/' ) {
-		chkdir[0] = '/';
-	}
-
-	// Traverse the directory path, and make sure the directory exists
-	tok = strtok_r(dname, "/", &saveptr);
-	while( tok ) {
-		strcat(chkdir, tok);
-		strcat(chkdir, "/");
-
-		errno = 0;
-		// Check if directory exists
-		if( (stat(chkdir, &info) < 0) ) {
-			switch( errno ) {
-			case ENOENT: // If the directory do not exist, create it
-				if( mkdir(chkdir, 0755) < 0 ) {
-					// If creating dir failed, report error
-					writelog(log, LOG_ALERT,
-						 "Could not create directory: %s (%s)",
-						 chkdir, strerror(errno));
-					ret = -1;
-					goto exit;
-				}
-				break;
-			default: // If other failure, report that and exit
-				writelog(log, LOG_ALERT,
-					 "Could not access directory: %s (%s)",
-					 chkdir, strerror(errno));
-				ret = -1;
-				goto exit;
-			}
-		}
-		// Goto next path element
-		tok = strtok_r(NULL, "/", &saveptr);
-	}
-	ret = 1;
- exit:
-	free_nullsafe(fname_cp);
-	free_nullsafe(chkdir);
-
-	return ret;
-}
-
-
-/**
- * Builds up a proper full path of where to save the report.
- *
- * @param destdir   Destination directory for all reports
- * @param fname     Report filename, containing hostname of the reporter
- * @param rterid    rteval run ID
- *
- * @return Returns a pointer to a string with the new full path filename on success, otherwise NULL.
- */
-static char *get_destination_path(LogContext *log, const char *destdir,
-				  parseJob_t *job, const int rterid)
-{
-        char *newfname = NULL;
-        int retlen = 0;
-
-        if( !job || rterid < 0 ) {
-                return NULL;
-        }
-
-        retlen = strlen_nullsafe(job->clientid) + strlen(destdir) + 24;
-        newfname = malloc_nullsafe(log, retlen+2);
-
-        snprintf(newfname, retlen, "%s/%s/report-%i.xml", destdir, job->clientid, rterid);
-
-        return newfname;
-}
-
-
-/**
- * Checks if the file size of the given file is below the given max size value.
- *
- * @param thrdata  Pointer to a threadData_t structure with log context and max_report_size setting
- * @param fname    Filename of the file to check
- *
- * @return Returns 1 if file is within the limit, otherwise 0.  On errors -1 is returned.
- */
-inline int check_filesize(threadData_t *thrdata, const char *fname) {
-	struct stat info;
-
-	if( !fname ) {
-		return 0;
-	}
-
-	errno = 0;
-	if( (stat(fname, &info) < 0) ) {
-		writelog(thrdata->dbc->log, LOG_ERR, "Failed to check report file '%s': %s",
-			 fname, strerror(errno));
-		return -1;
-	}
-
-	return (info.st_size <= thrdata->max_report_size);
-}
-
-
-/**
- * The core parse function.  Parses an XML file and stores it in the database according to
- * the xmlparser.xsl template.
- *
- * @param thrdata  Pointer to a threadData_t structure with database connection, log context, settings, etc
- * @param job      Pointer to a parseJob_t structure containing the job information
- *
- * @return Return values:
- * @code
- *          STAT_SUCCESS  : Successfully registered report
- *          STAT_FTOOBIG  : XML report file is too big
- *          STAT_XMLFAIL  : Could not parse the XML report file
- *          STAT_SYSREG   : Failed to register the system into the systems or systems_hostname tables
- *          STAT_RTERIDREG: Failed to get a new rterid value
- *          STAT_GENDB    : Failed to start an SQL transaction (BEGIN)
- *          STAT_RTEVRUNS : Failed to register the rteval run into rtevalruns or rtevalruns_details
- *          STAT_MEASURE  : Failed to register the measurement data into tables their corresponding tables
- *          STAT_REPMOVE  : Failed to move the report file
- * @endcode
- */
-inline int parse_report(threadData_t *thrdata, parseJob_t *job)
-{
-	int syskey = -1, rterid = -1;
-	int rc = -1;
-	xmlDoc *repxml = NULL;
-	char *destfname;
-
-	// Check file size - and reject too big files
-	if( check_filesize(thrdata, job->filename) == 0 ) {
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] (submid: %i) Report file '%s' is too big, rejected",
-			 thrdata->id, job->submid, job->filename);
-		return STAT_FTOOBIG;
-	}
-
-
-	repxml = xmlParseFile(job->filename);
-	if( !repxml ) {
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] (submid: %i) Could not parse XML file: %s",
-			 thrdata->id, job->submid, job->filename);
-	        return STAT_XMLFAIL;
-	}
-
-	pthread_mutex_lock(thrdata->mtx_sysreg);
-	syskey = db_register_system(thrdata->dbc, thrdata->xslt, repxml);
-	if( syskey < 0 ) {
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] Failed to register system (submid: %i, XML file: %s)",
-			 thrdata->id, job->submid, job->filename);
-		rc = STAT_SYSREG;
-		pthread_mutex_unlock(thrdata->mtx_sysreg);
-		goto exit;
-
-	}
-
-	rterid = db_get_new_rterid(thrdata->dbc);
-	if( rterid < 0 ) {
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] Failed to register rteval run (submid: %i, XML file: %s)",
-			 thrdata->id, job->submid, job->filename);
-		rc = STAT_RTERIDREG;
-		pthread_mutex_unlock(thrdata->mtx_sysreg);
-		goto exit;
-	}
-	pthread_mutex_unlock(thrdata->mtx_sysreg);
-
-	if( db_begin(thrdata->dbc) < 1 ) {
-		rc = STAT_GENDB;
-		goto exit;
-	}
-
-	// Create a new filename of where to save the report
-	destfname = get_destination_path(thrdata->dbc->log, thrdata->destdir, job, rterid);
-	if( !destfname ) {
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] Failed to generate local report filename for (submid: %i) %s",
-			 thrdata->id, job->submid, job->filename);
-		db_rollback(thrdata->dbc);
-		rc = STAT_UNKNFAIL;
-		goto exit;
-	}
-
-	if( db_register_rtevalrun(thrdata->dbc, thrdata->xslt, repxml, job->submid,
-				  syskey, rterid, destfname) < 0 ) {
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] Failed to register rteval run (submid: %i, XML file: %s)",
-			 thrdata->id, job->submid, job->filename);
-		db_rollback(thrdata->dbc);
-		rc = STAT_RTEVRUNS;
-		goto exit;
-	}
-
-	if( db_register_measurements(thrdata->dbc, thrdata->xslt, repxml, rterid) != 1 ) {
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] Failed to register measurement data (submid: %i, XML file: %s)",
-			 thrdata->id, job->submid, job->filename);
-		db_rollback(thrdata->dbc);
-		rc = STAT_MEASURE;
-		goto exit;
-	}
-
-	// When all database registrations are done, move the file to it's right place
-	if( make_report_dir(thrdata->dbc->log, destfname) < 1 ) { // Make sure report directory exists
-		db_rollback(thrdata->dbc);
-		rc = STAT_REPMOVE;
-		goto exit;
-	}
-
-	if( rename(job->filename, destfname) < 0 ) { // Move the file
-		writelog(thrdata->dbc->log, LOG_ERR,
-			 "[Thread %i] (submid: %i) Failed to move report file from %s to %s (%s)",
-			 thrdata->id, job->submid, job->filename, destfname, strerror(errno));
-		db_rollback(thrdata->dbc);
-		rc = STAT_REPMOVE;
-		goto exit;
-	}
-	free_nullsafe(destfname);
-
-	rc = STAT_SUCCESS;
-	db_commit(thrdata->dbc);
-	writelog(thrdata->dbc->log, LOG_INFO,
-		 "[Thread %i] Report parsed and stored (submid: %i, rterid: %i)",
-		 thrdata->id, job->submid, rterid);
- exit:
-	xmlFreeDoc(repxml);
-	return rc;
-}
-
-
-/**
- * The parser thread.  This thread lives until a shutdown notification is received.  It pulls
- * messages on a POSIX MQ based message queue containing submission ID and full path to an XML
- * report to be parsed.
- *
- * @param thrargs Contains database connection, XSLT stylesheet, POSXI MQ descriptor, etc
- *
- * @return Returns 0 on successful operation, otherwise 1 on errors.
- */
-void *parsethread(void *thrargs) {
-	threadData_t *args = (threadData_t *) thrargs;
-	parseJob_t jobinfo;
-	long exitcode = 0;
-
-	writelog(args->dbc->log, LOG_DEBUG, "[Thread %i] Starting", args->id);
-	pthread_mutex_lock(args->mtx_thrcnt);
-	(*(args->threadcount)) += 1;
-	pthread_mutex_unlock(args->mtx_thrcnt);
-
-	// Polling loop
-	while( *(args->shutdown) == 0 ) {
-		int len = 0;
-		unsigned int prio = 0;
-
-		// Check if the database connection is alive before pulling any messages
-		if( db_ping(args->dbc) != 1 ) {
-			writelog(args->dbc->log, LOG_EMERG,
-				 "[Thread %i] Lost database conneciting: Shutting down thread.",
-				 args->id);
-
-			if( *(args->threadcount) <= 1 ) {
-				writelog(args->dbc->log, LOG_EMERG,
-					 "No more worker threads available.  "
-					 "Signaling for complete shutdown!");
-				kill(getpid(), SIGUSR1);
-			}
-			exitcode = 1;
-			goto exit;
-		}
-
-		// Retrieve a parse job from the message queue
-		memset(&jobinfo, 0, sizeof(parseJob_t));
-		errno = 0;
-		len = mq_receive(args->msgq, (char *)&jobinfo, sizeof(parseJob_t), &prio);
-		if( (len < 0) && errno != EAGAIN ) {
-			writelog(args->dbc->log, LOG_CRIT,
-				 "Could not receive the message from queue: %s",
-				 strerror(errno));
-			pthread_exit((void *) 1);
-		}
-
-		// Ignore whatever message if the shutdown flag is set.
-		if( *(args->shutdown) != 0 ) {
-			break;
-		}
-
-		// If we have a message, then process the parse job
-		if( (errno != EAGAIN) && (len > 0) ) {
-			int res = 0;
-
-			writelog(args->dbc->log, LOG_INFO,
-				 "[Thread %i] Job recieved, submid: %i - %s",
-				 args->id, jobinfo.submid, jobinfo.filename);
-
-			// Mark the job as "in progress", if successful update, continue parsing it
-			if( db_update_submissionqueue(args->dbc, jobinfo.submid, STAT_INPROG) ) {
-				res = parse_report(args, &jobinfo);
-				// Set the status for the submission
-				db_update_submissionqueue(args->dbc, jobinfo.submid, res);
-			} else {
-				writelog(args->dbc->log, LOG_CRIT,
-					 "Failed to mark submid %i as STAT_INPROG",
-					 jobinfo.submid);
-			}
-		}
-	}
-	writelog(args->dbc->log, LOG_DEBUG, "[Thread %i] Shut down", args->id);
- exit:
-	pthread_mutex_lock(args->mtx_thrcnt);
-	(*(args->threadcount)) -= 1;
-	pthread_mutex_unlock(args->mtx_thrcnt);
-
-	pthread_exit((void *) exitcode);
-}
diff --git a/server/parser/parsethread.h b/server/parser/parsethread.h
deleted file mode 100644
index 90eb658..0000000
--- a/server/parser/parsethread.h
+++ /dev/null
@@ -1,38 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   parsethread.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   Thu Oct 15 11:52:10 2009
- *
- * @brief  Contains the "main" function which a parser threads runs
- *
- */
-
-#ifndef _PARSETHREAD_H
-#define _PARSETHREAD_H
-
-/**
- * jbNONE means no job available,
- * jbAVAIL indicates that parseJob_t contains a job
-*/
-typedef enum { jbNONE, jbAVAIL } jobStatus;
-
-/**
- * This struct is used for sending a parse job to a worker thread via POSIX MQ
- */
-typedef struct {
-        jobStatus status;                  /**< Info about if job information*/
-        unsigned int submid;               /**< Work info: Numeric ID of the job being parsed */
-        char clientid[256];                /**< Work info: Should contain senders hostname */
-        char filename[4096];               /**< Work info: Full filename of the report to be parsed */
-} parseJob_t;
-
-
-void *parsethread(void *thrargs);
-
-#endif
diff --git a/server/parser/pgsql.c b/server/parser/pgsql.c
deleted file mode 100644
index 5492d02..0000000
--- a/server/parser/pgsql.c
+++ /dev/null
@@ -1,1093 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   pgsql.c
- * @author David Sommerseth <davids@redhat.com>
- * @date   Wed Oct 13 17:44:35 2009
- *
- * @brief  Database API for the PostgreSQL database.
- *
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <pthread.h>
-#include <assert.h>
-#include <errno.h>
-
-#include <libpq-fe.h>
-
-#include <libxml/parser.h>
-#include <libxml/xmlsave.h>
-#include <libxslt/transform.h>
-#include <libxslt/xsltutils.h>
-
-#include <eurephia_nullsafe.h>
-#include <eurephia_xml.h>
-#include <eurephia_values.h>
-#include <configparser.h>
-#include <xmlparser.h>
-#include <pgsql.h>
-#include <log.h>
-#include <statuses.h>
-
-/** forward declaration, to be able to setup dbhelper_func pointers */
-static char * pgsql_BuildArray(LogContext *log, xmlNode *sql_n);
-
-/** Helper functions the xmlparser might beed */
-static dbhelper_func pgsql_helpers = {
-        .dbh_FormatArray = &(pgsql_BuildArray)
-};
-
-/**
- * Connect to a database, based on the given configuration
- *
- * @param cfg eurephiaVALUES containing the configuration
- * @param id  Database connection ID.  Used to identify which thread is doing what with the database
- * @param log Log context, where all logging will go
- *
- * @return Returns a database connection context
- */
-dbconn *db_connect(eurephiaVALUES *cfg, unsigned int id, LogContext *log) {
-	dbconn *ret = NULL;
-        PGresult *dbr = NULL;
-
-	ret = (dbconn *) malloc_nullsafe(log, sizeof(dbconn)+2);
-	ret->id = id;
-	ret->log = log;
-
-	writelog(log, LOG_DEBUG, "[Connection %i] Connecting to database: server=%s:%s, "
-		 "database=%s, user=%s", ret->id,
-		 eGet_value(cfg, "db_server"), eGet_value(cfg, "db_port"),
-		 eGet_value(cfg, "database"), eGet_value(cfg, "db_username"));
-	ret->db = PQsetdbLogin(eGet_value(cfg, "db_server"),
-			   eGet_value(cfg, "db_port"),
-			   NULL, /* pgopt */
-			   NULL, /* pgtty */
-			   eGet_value(cfg, "database"),
-			   eGet_value(cfg, "db_username"),
-			   eGet_value(cfg, "db_password"));
-
-	if( !ret->db ) {
-		writelog(log, LOG_EMERG,
-			 "[Connection %i] Could not connect to the database (unknown reason)", ret->id);
-		free_nullsafe(ret);
-		return NULL;
-	}
-
-	if( PQstatus(ret->db) != CONNECTION_OK ) {
-		writelog(log, LOG_EMERG, "[Connection %i] Failed to connect to the database: %s",
-			 ret->id, PQerrorMessage(ret->db));
-		free_nullsafe(ret);
-		return NULL;
-	}
-
-	// Retrieve the SQL schema version
-	dbr = PQexec(ret->db,
-		     "SELECT FLOOR(value::NUMERIC(6,3))*100 " // Convert version string to integer
-		     "       + to_char(substring(value, position('.' in value)+1)::INTEGER, '00')::INTEGER"
-		     "  FROM rteval_info WHERE key = 'sql_schema_ver'");
-	if( !dbr || (PQresultStatus(dbr) != PGRES_TUPLES_OK) || (PQntuples(dbr) != 1) ) {
-		// Query failed, assuming SQL schema version 1.00 (100).
-		// SQL schema versions before 1.1 (101) do not have the rteval_info table, thus
-		// a failure is not completely unexpected.
-		ret->sqlschemaver = 100;
-	} else {
-		ret->sqlschemaver = atoi_nullsafe(PQgetvalue(dbr, 0, 0));
-		if( ret->sqlschemaver < 100 ) {
-			ret->sqlschemaver = 100;  // The minimal version - version 1.00.
-		}
-	}
-	if( dbr ) {
-		PQclear(dbr);
-	}
-	init_xmlparser(&pgsql_helpers);
-	return ret;
-}
-
-
-/**
- * Pings the database connection to check if it is alive
- *
- * @param dbc  Database connection to ping
- *
- * @return Returns 1 if the connection is alive, otherwise 0
- */
-int db_ping(dbconn *dbc) {
-	PGresult *res = NULL;
-
-	// Send ping
-	res = PQexec(dbc->db, "");
-	PQclear(res);
-
-	// Check status
-	if( PQstatus(dbc->db) != CONNECTION_OK ) {
-		PQreset(dbc->db);
-		if( PQstatus(dbc->db) != CONNECTION_OK ) {
-			writelog(dbc->log, LOG_EMERG,
-				 "[Connection %i] Database error - Lost connection: %s",
-				 dbc->id, PQerrorMessage(dbc->db));
-			return 0;
-		} else {
-			writelog(dbc->log, LOG_CRIT,
-				 "[Conncetion %i] Database connection restored", dbc->id);
-		}
-	}
-	return 1;
-}
-
-
-/**
- * Disconnect from the database
- *
- * @param dbc Pointer to the database handle to be disconnected.
- */
-void db_disconnect(dbconn *dbc) {
-	if( dbc && dbc->db ) {
-		writelog(dbc->log, LOG_DEBUG, "[Connection %i] Disconnecting from database", dbc->id);
-		PQfinish(dbc->db);
-		dbc->db = NULL;
-		dbc->log = NULL;
-	}
-	free_nullsafe(dbc);
-}
-
-
-/**
- * This function does INSERT SQL queries based on an XML document (sqldata) which contains
- * all information about table, fields and records to be inserted.  For security and performance,
- * this function uses prepared SQL statements.
- *
- * This function is PostgreSQL specific.
- *
- * @param dbc     Database handler to a PostgreSQL
- * @param sqldoc  sqldata XML document containing the data to be inserted.
- *
- * The sqldata XML document must be formated like this:
- * @code
- * <sqldata table="{table name}" [key="{field name}">
- *    <fields>
- *       <field fid="{integer}">{field name}</field>
- *       ...
- *       ...
- *       <field fid="{integer_n}">{field name 'n'}</field>
- *    </fields>
- *    <records>
- *       <record>
- *          <value fid="{integer} [type="{data type}"] [hash="{hash type}">{value for field 'fid'</value>
- *          ...
- *          ...
- *          <value fid="{integer_n}">{value for field 'fid_n'</value>
- *       </record>
- *       ...
- *       ...
- *       ...
- *    </records>
- * </sqldata>
- * @endcode
- * The 'sqldata' root tag must contain a 'table' attribute.  This must contain the a name of a table
- * in the database.  If the 'key' attribute is set, the function will return the that field value for
- * each INSERT query, using INSERT ... RETURNING {field name}.  The sqldata root tag must then have
- * two children, 'fields' and 'records'.
- *
- * The 'fields' tag need to contain 'field' children tags for each field to insert data for.  Each
- * field in the fields tag must be assigned a unique integer.
- *
- * The 'records' tag need to contain 'record' children tags for each record to be inserted.  Each
- * record tag needs to have 'value' tags for each field which is found in the 'fields' section.
- *
- * The 'value' tags must have a 'fid' attribute.  This is the link between the field name in the
- * 'fields' section and the value to be inserted.
- *
- * The 'type' attribute may be used as well, but the only supported data type supported to this
- * attribute is 'xmlblob'.  In this case, the contents of the 'value' tag must be more XML tags.
- * These tags will then be serialised to a string which is inserted into the database.
- *
- * The 'hash' attribute of the 'value' tag can be set to 'sha1'.  This will make do a SHA1 hash
- * calculation of the value and this hash value will be used for the insert.
- *
- * @return Returns an eurephiaVALUES list containing information about each record which was inserted.
- *         If the 'key' attribute is not set in the 'sqldata' tag, the OID value of each record will be
- *         saved.  If the table do not support OIDs, the value will be '0'.  Otherwise the contents of
- *         the defined field name will be returned.  If one of the INSERT queries fails, it will abort
- *         further processing and the function will return NULL.
- */
-eurephiaVALUES *pgsql_INSERT(dbconn *dbc, xmlDoc *sqldoc) {
-	xmlNode *root_n = NULL, *fields_n = NULL, *recs_n = NULL, *ptr_n = NULL, *val_n = NULL;
-	char **field_ar = NULL, *fields = NULL, **value_ar = NULL, *values = NULL, *table = NULL, 
-		tmp[20], *sql = NULL, *key = NULL, oid[34];
-
-	unsigned int fieldcnt = 0, *field_idx, i = 0, schemaver = 0;
-	PGresult *dbres = NULL;
-	eurephiaVALUES *res = NULL;
-
-	assert( (dbc != NULL) && (sqldoc != NULL) );
-
-	root_n = xmlDocGetRootElement(sqldoc);
-	if( !root_n || (xmlStrcmp(root_n->name, (xmlChar *) "sqldata") != 0) ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Input XML document is not a valid sqldata document", dbc->id);
-		return NULL;
-	}
-
-	table = xmlGetAttrValue(root_n->properties, "table");
-	if( !table ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Input XML document is missing table reference", dbc->id);
-		return NULL;
-	}
-
-	schemaver = sqldataGetRequiredSchemaVer(dbc->log, root_n);
-	if( schemaver < 100 ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Failed parsing required SQL schema version", dbc->id);
-		return NULL;
-	}
-	if( schemaver > dbc->sqlschemaver ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Cannot process data for the '%s' table.  "
-			 "The needed SQL schema version is %i, while the database is using version %i",
-			 dbc->id, table, schemaver, dbc->sqlschemaver);
-		return NULL;
-	}
-
-	key = xmlGetAttrValue(root_n->properties, "key");
-
-	fields_n = xmlFindNode(root_n, "fields");
-	recs_n = xmlFindNode(root_n, "records");
-	if( !fields_n || !recs_n ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Input XML document is missing either <fields/> or <records/>",
-			 dbc->id);
-		return NULL;
-	}
-
-	// Count number of fields
-	foreach_xmlnode(fields_n->children, ptr_n) {
-		if( ptr_n->type == XML_ELEMENT_NODE ) {
-			fieldcnt++;
-		}
-	}
-
-	// Generate lists of all fields and a index mapping table
-	field_idx = calloc(fieldcnt+1, sizeof(unsigned int));
-	field_ar = calloc(fieldcnt+1, sizeof(char *));
-	foreach_xmlnode(fields_n->children, ptr_n) {
-		if( ptr_n->type != XML_ELEMENT_NODE ) {
-			continue;
-		}
-
-		field_idx[i] = atoi_nullsafe(xmlGetAttrValue(ptr_n->properties, "fid"));
-		field_ar[i] = xmlExtractContent(ptr_n);
-		i++;
-	}
-
-	// Generate strings with field names and value place holders
-	// for a prepared SQL statement
-	fields = malloc_nullsafe(dbc->log, 3);
-	values = malloc_nullsafe(dbc->log, 6*(fieldcnt+1));
-	strcpy(fields, "(");
-	strcpy(values, "(");
-	int len = 3;
-	for( i = 0; i < fieldcnt; i++ ) {
-		// Prepare VALUES section
-		snprintf(tmp, 6, "$%i", i+1);
-		append_str(values, tmp, (6*fieldcnt));
-
-		// Prepare fields section
-		len += strlen_nullsafe(field_ar[i])+2;
-		fields = realloc(fields, len);
-		strcat(fields, field_ar[i]);
-
-		if( i < (fieldcnt-1) ) {
-			strcat(fields, ",");
-			strcat(values, ",");
-		}
-	}
-	strcat(fields, ")");
-	strcat(values, ")");
-
-	// Build up the SQL query
-	sql = malloc_nullsafe(dbc->log,
-			      strlen_nullsafe(fields)
-			      + strlen_nullsafe(values)
-			      + strlen_nullsafe(table)
-			      + strlen_nullsafe(key)
-			      + 34 /* INSERT INTO  VALUES RETURNING*/
-			      );
-	sprintf(sql, "INSERT INTO %s %s VALUES %s", table, fields, values);
-	if( key ) {
-		strcat(sql, " RETURNING ");
-		strcat(sql, key);
-	}
-
-	// Create a prepared SQL query
-#ifdef DEBUG_SQL
-	writelog(dbc->log, LOG_DEBUG, "[Connection %i] Preparing SQL statement: %s", dbc->id, sql);
-#endif
-	dbres = PQprepare(dbc->db, "", sql, fieldcnt, NULL);
-	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Failed to prepare SQL query: %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-		PQclear(dbres);
-		goto exit;
-	}
-	PQclear(dbres);
-
-	// Loop through all records and generate SQL statements
-	res = eCreate_value_space(dbc->log, 1);
-	memset(&oid, 0, 34);
-	foreach_xmlnode(recs_n->children, ptr_n) {
-		if( ptr_n->type != XML_ELEMENT_NODE ) {
-			continue;
-		}
-
-		// Loop through all value nodes in each record node and get the values for each field
-		value_ar = calloc(fieldcnt, sizeof(char *));
-		i = 0;
-		foreach_xmlnode(ptr_n->children, val_n) {
-			char *fid_s = NULL;
-			int fid = -1;
-
-			if( i > fieldcnt ) {
-				break;
-			}
-
-			if( val_n->type != XML_ELEMENT_NODE ) {
-				continue;
-			}
-
-			fid_s = xmlGetAttrValue(val_n->properties, "fid");
-			fid = atoi_nullsafe(fid_s);
-			if( (fid_s == NULL) || (fid < 0) ) {
-				continue;
-			}
-			value_ar[field_idx[i]] = sqldataExtractContent(dbc->log, val_n);
-			i++;
-		}
-
-		// Insert the record into the database
-		dbres = PQexecPrepared(dbc->db, "", fieldcnt,
-				       (const char * const *)value_ar, NULL, NULL, 0);
-		if( PQresultStatus(dbres) != (key ? PGRES_TUPLES_OK : PGRES_COMMAND_OK) ) {
-			writelog(dbc->log, LOG_ALERT, "[Connection %i] Failed to do SQL INSERT query: %s",
-				 dbc->id, PQresultErrorMessage(dbres));
-			PQclear(dbres);
-			eFree_values(res);
-			res = NULL;
-
-			// Free up the memory we've used for this record
-			for( i = 0; i < fieldcnt; i++ ) {
-				free_nullsafe(value_ar[i]);
-			}
-			free_nullsafe(value_ar);
-			goto exit;
-		}
-		if( key ) {
-			// If the /sqldata/@key attribute was set, fetch the returning ID
-			eAdd_value(res, key, PQgetvalue(dbres, 0, 0));
-		} else {
-			snprintf(oid, 33, "%ld%c", (unsigned long int) PQoidValue(dbres), 0);
-			eAdd_value(res, "oid", oid);
-		}
-		PQclear(dbres);
-
-		// Free up the memory we've used for this record
-		for( i = 0; i < fieldcnt; i++ ) {
-			free_nullsafe(value_ar[i]);
-		}
-		free_nullsafe(value_ar);
-	}
-
- exit:
-	free_nullsafe(sql);
-	free_nullsafe(fields);
-	free_nullsafe(values);
-	free_nullsafe(field_ar);
-	free_nullsafe(field_idx);
-	return res;
-}
-
-/**
- * @copydoc sqldataValueArray()
- */
-static char * pgsql_BuildArray(LogContext *log, xmlNode *sql_n) {
-	char *ret = NULL, *ptr = NULL;
-	xmlNode *node = NULL;
-	size_t retlen = 0;
-
-	ret = malloc_nullsafe(log, 2);
-	if( ret == NULL ) {
-		writelog(log, LOG_ERR,
-			 "Failed to allocate memory for a new PostgreSQL array");
-		return NULL;
-	}
-	strncat(ret, "{", 1);
-
-	/* Iterate all ./value/value elements and build up a PostgreSQL specific array */
-	foreach_xmlnode(sql_n->children, node) {
-		if( (node->type != XML_ELEMENT_NODE)
-		    || xmlStrcmp(node->name, (xmlChar *) "value") != 0 ) {
-			// Skip uninteresting nodes
-			continue;
-		}
-		ptr = sqldataValueHash(log, node);
-		if( ptr ) {
-			retlen += strlen(ptr) + 4;
-			ret = realloc(ret, retlen);
-			if( ret == NULL ) {
-				writelog(log, LOG_ERR,
-					 "Failed to allocate memory to expand "
-					 "array to include '%s'", ptr);
-				free_nullsafe(ret);
-				free_nullsafe(ptr);
-				return NULL;
-			}
-			/* Newer PostgreSQL servers expects numbers to be without quotes */
-			if( isNumber(ptr) == 0 ) {
-				/* Data is a string */
-				strncat(ret, "'", 1);
-				strncat(ret, ptr, strlen(ptr));
-				strncat(ret, "',", 2);
-			} else {
-				/* Data is a number */
-				strncat(ret, ptr, strlen(ptr));
-				strncat(ret, ",", 1);
-			}
-			free_nullsafe(ptr);
-		}
-	}
-	/* Replace the last comma with a close-array marker */
-	ret[strlen(ret)-1] = '}';
-	ret[strlen(ret)] = 0;
-	return ret;
-}
-
-
-/**
- * Start an SQL transaction (SQL BEGIN)
- *
- * @param dbc Database handler where to perform the SQL queries
- *
- * @return Returns 1 on success, otherwise -1 is returned
- */
-int db_begin(dbconn *dbc) {
-	PGresult *dbres = NULL;
-
-	dbres = PQexec(dbc->db, "BEGIN");
-	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Failed to do prepare a transaction (BEGIN): %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-		PQclear(dbres);
-		return -1;
-	}
-	PQclear(dbres);
-	return 1;
-}
-
-
-/**
- * Commits an SQL transaction (SQL COMMIT)
- *
- * @param dbc Database handler where to perform the SQL queries
- *
- * @return Returns 1 on success, otherwise -1 is returned
- */
-int db_commit(dbconn *dbc) {
-	PGresult *dbres = NULL;
-
-	dbres = PQexec(dbc->db, "COMMIT");
-	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Failed to do commit a database transaction (COMMIT): %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-		PQclear(dbres);
-		return -1;
-	}
-	PQclear(dbres);
-	return 1;
-}
-
-
-/**
- * Aborts an SQL transaction (SQL ROLLBACK/ABORT)
- *
- * @param dbc Database handler where to perform the SQL queries
- *
- * @return Returns 1 on success, otherwise -1 is returned
- */
-int db_rollback(dbconn *dbc) {
-	PGresult *dbres = NULL;
-
-	dbres = PQexec(dbc->db, "ROLLBACK");
-	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
-		writelog(dbc->log, LOG_CRIT,
-			 "[Connection %i] Failed to do abort/rollback a transaction (ROLLBACK): %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-		PQclear(dbres);
-		return -1;
-	}
-	PQclear(dbres);
-	return 1;
-}
-
-
-/**
- * This function blocks until a notification is received from the database
- *
- * @param dbc        Database connection
- * @param shutdown   Pointer to the shutdown flag.  Used to avoid reporting false errors.
- * @param listenfor  Name to be used when calling LISTEN
- *
- * @return Returns 1 on successful waiting, otherwise -1
- */
-int db_wait_notification(dbconn *dbc, const int *shutdown, const char *listenfor) {
-	int sock, ret = 0;
-	PGresult *dbres = NULL;
-	PGnotify *notify = NULL;
-	fd_set input_mask;
-	char *sql = NULL;
-
-	sql = malloc_nullsafe(dbc->log, strlen_nullsafe(listenfor) + 12);
-	assert( sql != NULL );
-
-	// Initiate listening
-	sprintf(sql, "LISTEN %s", listenfor);
-	dbres = PQexec(dbc->db, sql);
-	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
-		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-		free_nullsafe(sql);
-		PQclear(dbres);
-		return -1;
-	}
-	PQclear(dbres);
-
-	// Start listening and waiting
-	while( ret == 0 ) {
-		sock = PQsocket(dbc->db);
-		if (sock < 0) {
-			// shouldn't happen
-			ret = -1;
-			break;
-		}
-
-		// Wait for something to happen on the database socket
-		FD_ZERO(&input_mask);
-		FD_SET(sock, &input_mask);
-		if (select(sock + 1, &input_mask, NULL, NULL, NULL) < 0) {
-			// If the shutdown flag is set, select() will fail due to a signal.  Only
-			// report errors if we're not shutting down, or else exit normally with
-			// successful waiting.
-			if( *shutdown == 0 ) {
-				writelog(dbc->log, LOG_CRIT, "[Connection %i] select() failed: %s",
-					 dbc->id, strerror(errno));
-				ret = -1;
-				goto exit;
-			} else {
-				ret = 1;
-			}
-			break;
-		}
-
-		// Process the event
-		PQconsumeInput(dbc->db);
-
-		// Check if connection still is valid
-		if( PQstatus(dbc->db) != CONNECTION_OK ) {
-			PQreset(dbc->db);
-			if( PQstatus(dbc->db) != CONNECTION_OK ) {
-				writelog(dbc->log, LOG_EMERG,
-					 "[Connection %i] Database connection died: %s",
-					 dbc->id, PQerrorMessage(dbc->db));
-				ret = -1;
-				goto exit;
-			}
-			writelog(dbc->log, LOG_CRIT,
-				 "[Connection %i] Database connection restored", dbc->id);
-		}
-
-		while ((notify = PQnotifies(dbc->db)) != NULL) {
-			// If a notification was received, inform and exit with success.
-			writelog(dbc->log, LOG_DEBUG,
-				 "[Connection %i] Received notfication from pid %d",
-				 dbc->id, notify->be_pid);
-			PQfreemem(notify);
-			ret = 1;
-			break;
-		}
-	}
-
-	// Stop listening when we exit
-	sprintf(sql, "UNLISTEN %s", listenfor);
-	dbres = PQexec(dbc->db, sql);
-	if( PQresultStatus(dbres) != PGRES_COMMAND_OK ) {
-		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-		free_nullsafe(sql);
-		ret = -1;
-	}
-	free_nullsafe(sql);
-	PQclear(dbres);
-
- exit:
-	return ret;
-}
-
-
-/**
- * Retrive the first available submitted report
- *
- * @param dbc   Database connection
- * @param mtx   pthread_mutex to avoid parallel access to the submission queue table, to avoid
- *              the same job being retrieved multiple times.
- *
- * @return Returns a pointer to a parseJob_t struct, with the parse job info on success, otherwise NULL
- */
-parseJob_t *db_get_submissionqueue_job(dbconn *dbc, pthread_mutex_t *mtx) {
-	parseJob_t *job = NULL;
-	PGresult *res = NULL;
-	char sql[4098];
-
-	job = (parseJob_t *) malloc_nullsafe(dbc->log, sizeof(parseJob_t));
-
-	// Get the first available submission
-	memset(&sql, 0, 4098);
-	snprintf(sql, 4096,
-		 "SELECT submid, filename, clientid"
-		 "  FROM submissionqueue"
-		 " WHERE status = %i"
-		 " ORDER BY submid"
-		 " LIMIT 1",
-		 STAT_NEW);
-
-	pthread_mutex_lock(mtx);
-	res = PQexec(dbc->db, sql);
-	if( PQresultStatus(res) != PGRES_TUPLES_OK ) {
-		pthread_mutex_unlock(mtx);
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Failed to query submission queue (SELECT): %s",
-			 dbc->id, PQresultErrorMessage(res));
-		PQclear(res);
-		free_nullsafe(job);
-		return NULL;
-	}
-
-	if( PQntuples(res) == 1 ) {
-		job->status = jbAVAIL;
-		job->submid = atoi_nullsafe(PQgetvalue(res, 0, 0));
-		snprintf(job->filename, 4095, "%.4094s", PQgetvalue(res, 0, 1));
-		snprintf(job->clientid,  255, "%.254s", PQgetvalue(res, 0, 2));
-
-		// Update the submission queue status
-		if( db_update_submissionqueue(dbc, job->submid, STAT_ASSIGNED) < 1 ) {
-			pthread_mutex_unlock(mtx);
-			writelog(dbc->log, LOG_ALERT, "[Connection %i] Failed to update "
-				 "submission queue statis to STAT_ASSIGNED", dbc->id);
-			free_nullsafe(job);
-			return NULL;
-		}
-	} else {
-		job->status = jbNONE;
-	}
-	pthread_mutex_unlock(mtx);
-	PQclear(res);
-	return job;
-}
-
-
-/**
- * Updates the submission queue table with the new status and the appropriate timestamps
- *
- * @param dbc     Database handler to the rteval database
- * @param submid  Submission ID to update
- * @param status  The new status
- *
- * @return Returns 1 on success, 0 on invalid status ID and -1 on database errors.
- */
-int db_update_submissionqueue(dbconn *dbc, unsigned int submid, int status) {
-	PGresult *res = NULL;
-	char sql[4098];
-
-	memset(&sql, 0, 4098);
-	switch( status ) {
-	case STAT_ASSIGNED:
-	case STAT_RTERIDREG:
-	case STAT_REPMOVE:
-	case STAT_XMLFAIL:
-	case STAT_FTOOBIG:
-		snprintf(sql, 4096,
-			 "UPDATE submissionqueue SET status = %i"
-			 " WHERE submid = %i", status, submid);
-		break;
-
-	case STAT_INPROG:
-		snprintf(sql, 4096,
-			 "UPDATE submissionqueue SET status = %i, parsestart = NOW()"
-			 " WHERE submid = %i", status, submid);
-		break;
-
-	case STAT_SUCCESS:
-	case STAT_UNKNFAIL:
-	case STAT_SYSREG:
-	case STAT_GENDB:
-	case STAT_RTEVRUNS:
-	case STAT_MEASURE:
-		snprintf(sql, 4096,
-			 "UPDATE submissionqueue SET status = %i, parseend = NOW() WHERE submid = %i",
-			 status, submid);
-		break;
-
-	default:
-	case STAT_NEW:
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Invalid status (%i) attempted to set on submid %i",
-			 dbc->id, status, submid);
-		return 0;
-	}
-
-	res = PQexec(dbc->db, sql);
-	if( !res ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Unkown error when updating submid %i to status %i",
-			 dbc->id, submid, status);
-		return -1;
-	} else if( PQresultStatus(res) != PGRES_COMMAND_OK ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Failed to UPDATE submissionqueue (submid: %i, status: %i): %s",
-			 dbc->id, submid, status, PQresultErrorMessage(res));
-		PQclear(res);
-		return -1;
-	}
-	PQclear(res);
-	return 1;
-}
-
-
-/**
- * Registers information into the 'systems' and 'systems_hostname' tables, based on the
- * summary/report XML file from rteval.
- *
- * @param dbc        Database handler where to perform the SQL queries
- * @param xslt       A pointer to a parsed 'xmlparser.xsl' XSLT template
- * @param summaryxml The XML report from rteval
- *
- * @return Returns a value > 0 on success, which is a unique reference to the system of the report.
- *         If the function detects that this system is already registered, the 'syskey' reference will
- *         be reused.  On errors, -1 will be returned.
- */
-int db_register_system(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml) {
-	PGresult *dbres = NULL;
-	eurephiaVALUES *dbdata = NULL;
-	xmlDoc *sysinfo_d = NULL, *hostinfo_d = NULL;
-	parseParams prms;
-	char sqlq[4098];
-	char *sysid = NULL;  // SHA1 value of the system id
-	char *ipaddr = NULL, *hostname = NULL;
-	int syskey = -1;
-
-	memset(&prms, 0, sizeof(parseParams));
-	prms.table = "systems";
-	sysinfo_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
-	if( !sysinfo_d ) {
-		writelog(dbc->log, LOG_ERR, "[Connection %i] Could not parse the input XML data", dbc->id);
-		syskey= -1;
-		goto exit;
-	}
-	sysid = sqldataGetValue(dbc->log, sysinfo_d, "sysid", 0);
-	if( !sysid ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Could not retrieve the sysid field from the input XML", dbc->id);
-		syskey= -1;
-		goto exit;
-	}
-
-	memset(&sqlq, 0, 4098);
-	snprintf(sqlq, 4096, "SELECT syskey FROM systems WHERE sysid = '%.256s'", sysid);
-	free_nullsafe(sysid);
-	dbres = PQexec(dbc->db, sqlq);
-	if( PQresultStatus(dbres) != PGRES_TUPLES_OK ) {
-		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-		writelog(dbc->log, LOG_DEBUG, "[Connection %i] Failing SQL query: %s",
-			 dbc->id, sqlq);
-		PQclear(dbres);
-		syskey= -1;
-		goto exit;
-	}
-
-	if( PQntuples(dbres) == 0 ) {  // No record found, need to register this system
-		PQclear(dbres);
-
-		dbdata = pgsql_INSERT(dbc, sysinfo_d);
-		if( !dbdata ) {
-			syskey= -1;
-			goto exit;
-		}
-		if( (eCount(dbdata) != 1) || !dbdata->val ) { // Only one record should be registered
-			writelog(dbc->log, LOG_ALERT,
-				 "[Connection %i] Failed to register the system", dbc->id);
-			eFree_values(dbdata);
-			syskey= -1;
-			goto exit;
-		}
-		syskey = atoi_nullsafe(dbdata->val);
-		hostinfo_d = sqldataGetHostInfo(dbc->log, xslt, summaryxml, syskey, &hostname, &ipaddr);
-		if( !hostinfo_d ) {
-			syskey = -1;
-			goto exit;
-		}
-		eFree_values(dbdata);
-
-		dbdata = pgsql_INSERT(dbc, hostinfo_d);
-		syskey = (dbdata ? syskey : -1);
-		eFree_values(dbdata);
-
-	} else if( PQntuples(dbres) == 1 ) { // System found - check if the host IP is known or not
-		syskey = atoi_nullsafe(PQgetvalue(dbres, 0, 0));
-		hostinfo_d = sqldataGetHostInfo(dbc->log, xslt, summaryxml, syskey, &hostname, &ipaddr);
-		if( !hostinfo_d ) {
-			syskey = -1;
-			goto exit;
-		}
-		PQclear(dbres);
-
-		// Check if this hostname and IP address is registered
-		snprintf(sqlq, 4096,
-			 "SELECT syskey FROM systems_hostname"
-			 " WHERE hostname='%.256s'",
-			 hostname);
-
-		if( ipaddr ) {
-			append_str(sqlq, "AND ipaddr='", 4028);
-			append_str(sqlq, ipaddr, 4092);
-			append_str(sqlq, "'", 4096);
-		} else {
-			append_str(sqlq, "AND ipaddr IS NULL", 4096);
-		}
-
-		dbres = PQexec(dbc->db, sqlq);
-		if( PQresultStatus(dbres) != PGRES_TUPLES_OK ) {
-			writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
-				 dbc->id, PQresultErrorMessage(dbres));
-			writelog(dbc->log, LOG_DEBUG, "[Connection %i] Failing SQL query: %s",
-				 dbc->id, sqlq);
-			PQclear(dbres);
-			syskey= -1;
-			goto exit;
-		}
-
-		if( PQntuples(dbres) == 0 ) { // Not registered, then register it
-			dbdata = pgsql_INSERT(dbc, hostinfo_d);
-			syskey = (dbdata ? syskey : -1);
-			eFree_values(dbdata);
-		}
-		PQclear(dbres);
-	} else {
-		// Critical -- system IDs should not be registered more than once
-		writelog(dbc->log, LOG_CRIT, "[Connection %i] Multiple systems registered (%s)",
-			 dbc->id, sqlq);
-		syskey= -1;
-	}
-
- exit:
-	free_nullsafe(hostname);
-	free_nullsafe(ipaddr);
-	if( sysinfo_d ) {
-		xmlFreeDoc(sysinfo_d);
-	}
-	if( hostinfo_d ) {
-		xmlFreeDoc(hostinfo_d);
-	}
-	return syskey;
-}
-
-
-/**
- * Retrieves the next available rteval run ID (rterid)
- *
- * @param dbc  Database handler where to perform the SQL query
- *
- * @return Returns a value > 0 on success, containing the assigned rterid value.  Otherwise -1 is returned.
- */
-int db_get_new_rterid(dbconn *dbc) {
-	PGresult *dbres = NULL;
-	int rterid = 0;
-
-	dbres = PQexec(dbc->db, "SELECT nextval('rtevalruns_rterid_seq')");
-	if( (PQresultStatus(dbres) != PGRES_TUPLES_OK) || (PQntuples(dbres) != 1) ) {
-		rterid = -1;
-	} else {
-		rterid = atoi_nullsafe(PQgetvalue(dbres, 0, 0));
-	}
-
-	if( rterid < 1 ) {
-		writelog(dbc->log, LOG_CRIT,
-			 "[Connection %i] Failed to retrieve a new rterid value", dbc->id);
-	}
-	if( rterid < 0 ) {
-		writelog(dbc->log, LOG_ALERT, "[Connection %i] SQL %s",
-			 dbc->id, PQresultErrorMessage(dbres));
-	}
-	PQclear(dbres);
-	return rterid;
-}
-
-
-/**
- * Registers information into the 'rtevalruns' and 'rtevalruns_details' tables
- *
- * @param dbc           Database handler where to perform the SQL queries
- * @param xslt          A pointer to a parsed 'xmlparser.xsl' XSLT template
- * @param summaryxml    The XML report from rteval
- * @param submid        Submission ID, referencing the record in the submissionqueue table.
- * @param syskey        A positive integer containing the return value from db_register_system()
- * @param rterid        A positive integer containing the return value from db_get_new_rterid()
- * @param report_fname  A string containing the filename of the report.
- *
- * @return Returns 1 on success, otherwise -1 is returned.
- */
-int db_register_rtevalrun(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml,
-			  unsigned int submid, int syskey, int rterid, const char *report_fname)
-{
-	int ret = -1;
-	xmlDoc *rtevalrun_d = NULL, *rtevalrundets_d = NULL;
-	parseParams prms;
-	eurephiaVALUES *dbdata = NULL;
-
-	// Parse the rtevalruns information
-	memset(&prms, 0, sizeof(parseParams));
-	prms.table = "rtevalruns";
-	prms.syskey = syskey;
-	prms.rterid = rterid;
-	prms.submid = submid;
-	prms.report_filename = report_fname;
-	rtevalrun_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
-	if( !rtevalrun_d ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Could not parse the input XML data", dbc->id);
-		ret = -1;
-		goto exit;
-	}
-
-	// Register the rteval run information
-	dbdata = pgsql_INSERT(dbc, rtevalrun_d);
-	if( !dbdata ) {
-		ret = -1;
-		goto exit;
-	}
-
-	if( eCount(dbdata) != 1 ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Failed to register the rteval run", dbc->id);
-		ret = -1;
-		eFree_values(dbdata);
-		goto exit;
-	}
-	eFree_values(dbdata);
-
-	// Parse the rtevalruns_details information
-	memset(&prms, 0, sizeof(parseParams));
-	prms.table = "rtevalruns_details";
-	prms.rterid = rterid;
-	rtevalrundets_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
-	if( !rtevalrundets_d ) {
-		writelog(dbc->log, LOG_ERR,
-			 "[Connection %i] Could not parse the input XML data (rtevalruns_details)",
-			 dbc->id);
-		ret = -1;
-		goto exit;
-	}
-
-	// Register the rteval_details information
-	dbdata = pgsql_INSERT(dbc, rtevalrundets_d);
-	if( !dbdata ) {
-		ret = -1;
-		goto exit;
-	}
-
-	// Check that only one record was inserted
-	if( eCount(dbdata) != 1 ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] Failed to register the rteval run details", dbc->id);
-		ret = -1;
-	}
-	eFree_values(dbdata);
-	ret = 1;
- exit:
-	if( rtevalrun_d ) {
-		xmlFreeDoc(rtevalrun_d);
-	}
-	if( rtevalrundets_d ) {
-		xmlFreeDoc(rtevalrundets_d);
-	}
-	return ret;
-}
-
-
-/**
- * Registers data returned from measurement results into the database.
- *
- * @param dbc        Database handler where to perform the SQL queries
- * @param xslt       A pointer to a parsed 'xmlparser.xsl' XSLT template
- * @param summaryxml The XML report from rteval
- * @param rterid     A positive integer referencing the rteval run ID, returned from db_register_rtevalrun()
- *
- * @return Returns 1 on success, otherwise -1
- */
-int db_register_measurements(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml, int rterid) {
-	int result = -1;
-	xmlDoc *meas_d = NULL;
-	parseParams prms;
-	eurephiaVALUES *dbdata = NULL;
-	int measrecs = 0;
-        char *tbl = NULL;
-	int i;
-
-	memset(&prms, 0, sizeof(parseParams));
-	prms.rterid = rterid;
-
-	// Loop through all configured measurement tables and process each table
-        i = 0;
-        for_array_str(tbl, i, dbc->measurement_tbls) {
-                writelog(dbc->log, LOG_DEBUG, "Processing measurement table '%s'", tbl);
-		prms.table = tbl;
-		meas_d = parseToSQLdata(dbc->log, xslt, summaryxml, &prms);
-		if( meas_d && meas_d->children ) {
-			// Insert SQL data which was found and generated
-			dbdata = pgsql_INSERT(dbc, meas_d);
-			if( !dbdata ) {
-				result = -1;
-				xmlFreeDoc(meas_d);
-				goto exit;
-			}
-
-			if (eCount(dbdata) > 0) {
-				measrecs++;
-			}
-			eFree_values(dbdata);
-		}
-		if( meas_d ) {
-			xmlFreeDoc(meas_d);
-		}
-	}
-
-	// Report error if not enough cyclictest data is registered.
-	if( measrecs < 1 ) {
-		writelog(dbc->log, LOG_ALERT,
-			 "[Connection %i] No cyclictest raw data or histogram data registered", dbc->id);
-		result = -1;
-	} else {
-		result = 1;
-	}
- exit:
-	return result;
-}
diff --git a/server/parser/pgsql.h b/server/parser/pgsql.h
deleted file mode 100644
index d8be135..0000000
--- a/server/parser/pgsql.h
+++ /dev/null
@@ -1,58 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   pgsql.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   Wed Oct 13 17:44:35 2009
- *
- * @brief  Database API for the PostgreSQL database.
- *
- *
- */
-
-#ifndef _RTEVAL_PGSQL_H
-#define _RTEVAL_PGSQL_H
-
-#include <libpq-fe.h>
-#include <libxml/parser.h>
-#include <libxslt/transform.h>
-
-#include <log.h>
-#include <eurephia_values.h>
-#include <parsethread.h>
-#include <xmlparser.h>
-
-/**
- *  A unified database abstraction layer, providing log support
- */
-typedef struct {
-	unsigned int id;           /**< Unique connection ID, used for debugging */
-	LogContext *log;           /**< Initialised log context */
-	PGconn *db;                /**< Database connection handler */
-	unsigned int sqlschemaver; /**< SQL schema version, retrieved from rteval_info table */
-	array_str_t *measurement_tbls; /**< Measurement tables to process */
-} dbconn;
-
-/* Generic database function */
-dbconn *db_connect(eurephiaVALUES *cfg, unsigned int id, LogContext *log);
-int db_ping(dbconn *dbc);
-void db_disconnect(dbconn *dbc);
-int db_begin(dbconn *dbc);
-int db_commit(dbconn *dbc);
-int db_rollback(dbconn *dbc);
-
-/* rteval specific database functions */
-int db_wait_notification(dbconn *dbc, const int *shutdown, const char *listenfor);
-parseJob_t *db_get_submissionqueue_job(dbconn *dbc, pthread_mutex_t *mtx);
-int db_update_submissionqueue(dbconn *dbc, unsigned int submid, int status);
-int db_register_system(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml);
-int db_get_new_rterid(dbconn *dbc);
-int db_register_rtevalrun(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml,
-			  unsigned int submid, int syskey, int rterid, const char *report_fname);
-int db_register_measurements(dbconn *dbc, xsltStylesheet *xslt, xmlDoc *summaryxml, int rterid);
-
-#endif
diff --git a/server/parser/rteval-parserd.c b/server/parser/rteval-parserd.c
deleted file mode 100644
index 7aba85d..0000000
--- a/server/parser/rteval-parserd.c
+++ /dev/null
@@ -1,533 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   rteval-parserd.c
- * @author David Sommerseth <davids@redhat.com>
- * @date   Thu Oct 15 11:59:27 2009
- *
- * @brief  Polls the rteval.submissionqueue table for notifications
- *         from new inserts and sends the file to a processing thread
- *
- *
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <pthread.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-#include <assert.h>
-
-#include <eurephia_nullsafe.h>
-#include <eurephia_values.h>
-#include <configparser.h>
-#include <pgsql.h>
-#include <threadinfo.h>
-#include <parsethread.h>
-#include <argparser.h>
-
-#define DEFAULT_MSG_MAX 5             /**< Default size of the message queue */
-#define XMLPARSER_XSL "xmlparser.xsl" /**< rteval report parser XSLT, parses XML into database friendly data*/
-
-static int shutdown = 0;              /**<  Variable indicating if the program should shutdown */
-static LogContext *logctx = NULL;     /**<  Initialsed log context, to be used by sigcatch() */
-
-
-/**
- * Simple signal catcher.  Used for SIGINT and SIGTERM signals, and will set the global shutdown
- * shutdown flag.  It's expected that all threads behaves properly and exits as soon as their current
- * work is completed
- *
- * @param sig Recieved signal (not used)
- */
-void sigcatch(int sig) {
-	switch( sig ) {
-	case SIGINT:
-	case SIGTERM:
-		if( shutdown == 0 ) {
-			shutdown = 1;
-			writelog(logctx, LOG_INFO, "[SIGNAL] Shutting down");
-		} else {
-			writelog(logctx, LOG_INFO, "[SIGNAL] Shutdown in progress ... please be patient ...");
-		}
-		break;
-
-	case SIGUSR1:
-		writelog(logctx, LOG_EMERG, "[SIGNAL] Shutdown alarm from a worker thread");
-		shutdown = 1;
-		break;
-
-	default:
-		break;
-	}
-
-	// re-enable signals, to avoid brute force exits.
-	// If brute force is needed, SIGKILL is available.
-	signal(sig, sigcatch);
-}
-
-
-/**
- * Opens and reads /proc/sys/fs/mqueue/msg_max, to get the maximum number of allowed messages
- * on POSIX MQ queues.  rteval-parserd will use as much of this as possible when needed.
- *
- * @return Returns the system msg_max value, or DEFAULT_MSG_MAX on failure to read the setting.
- */
-unsigned int get_mqueue_msg_max(LogContext *log) {
-	FILE *fp = NULL;
-	char buf[130];
-	unsigned int msg_max = DEFAULT_MSG_MAX;
-
-	fp = fopen("/proc/sys/fs/mqueue/msg_max", "r");
-	if( !fp ) {
-		writelog(log, LOG_WARNING,
-			"Could not open /proc/sys/fs/mqueue/msg_max, defaulting to %i",
-			msg_max);
-		writelog(log, LOG_INFO, "%s", strerror(errno));
-		return msg_max;
-	}
-
-	memset(&buf, 0, 130);
-	if( fread(&buf, 1, 128, fp) < 1 ) {
-		writelog(log, LOG_WARNING,
-			"Could not read /proc/sys/fs/mqueue/msg_max, defaulting to %i",
-			msg_max);
-		writelog(log, LOG_INFO, "%s", strerror(errno));
-	} else {
-		msg_max = atoi_nullsafe(buf);
-		if( msg_max < 1 ) {
-			msg_max = DEFAULT_MSG_MAX;
-			writelog(log, LOG_WARNING,
-				"Failed to parse /proc/sys/fs/mqueue/msg_max,"
-				"defaulting to %i", msg_max);
-		}
-	}
-	fclose(fp);
-	return msg_max;
-}
-
-
-/**
- * Main loop, which polls the submissionqueue table and puts jobs found here into a POSIX MQ queue
- * which the worker threads will pick up.
- *
- * @param dbc           Database connection, where to query the submission queue
- * @param msgq          file descriptor for the message queue
- * @param activethreads Pointer to an int value containing active worker threads.  Each thread updates
- *                      this value directly, and this function should only read it.
- *
- * @return Returns 0 on successful run, otherwise > 0 on errors.
- */
-int process_submission_queue(dbconn *dbc, mqd_t msgq, int *activethreads) {
-	pthread_mutex_t mtx_submq = PTHREAD_MUTEX_INITIALIZER;
-	parseJob_t *job = NULL;
-	int rc = 0, i, actthr_cp = 0;
-
-	while( shutdown == 0 ) {
-		// Check status if the worker threads
-		// If we don't have any worker threads, shut down immediately
-		writelog(dbc->log, LOG_DEBUG, "Active worker threads: %i", *activethreads);
-		if( *activethreads < 1 ) {
-			writelog(dbc->log, LOG_EMERG,
-				 "All worker threads ceased to exist.  Shutting down!");
-			shutdown = 1;
-			rc = 1;
-			goto exit;
-		}
-
-		if( db_ping(dbc) != 1 ) {
-			writelog(dbc->log, LOG_EMERG, "Lost connection to database.  Shutting down!");
-			shutdown = 1;
-			rc = 1;
-			goto exit;
-		}
-
-		// Fetch an available job
-		job = db_get_submissionqueue_job(dbc, &mtx_submq);
-		if( !job ) {
-			writelog(dbc->log, LOG_EMERG,
-				 "Failed to get submission queue job.  Shutting down!");
-			shutdown = 1;
-			rc = 1;
-			goto exit;
-		}
-		if( job->status == jbNONE ) {
-			free_nullsafe(job);
-			if( db_wait_notification(dbc, &shutdown, "rteval_submq") < 1 ) {
-				writelog(dbc->log, LOG_EMERG,
-					 "Failed to wait for DB notification.  Shutting down!");
-				shutdown = 1;
-				rc = 1;
-				goto exit;
-			}
-			continue;
-		}
-
-		// Send the job to the queue
-		writelog(dbc->log, LOG_DEBUG, "** New job queued: submid %i, %s", job->submid, job->filename);
-		do {
-			int res;
-
-			errno = 0;
-			res = mq_send(msgq, (char *) job, sizeof(parseJob_t), 1);
-			if( (res < 0) && (errno != EAGAIN) ) {
-				writelog(dbc->log, LOG_EMERG,
-					 "Could not send parse job to the queue.  "
-					 "Shutting down!");
-				shutdown = 1;
-				rc = 2;
-				goto exit;
-			} else if( errno == EAGAIN ) {
-				writelog(dbc->log, LOG_WARNING,
-					"Message queue filled up.  "
-					"Will not add new messages to queue for the next 60 seconds");
-				sleep(60);
-			}
-		} while( (errno == EAGAIN) );
-		free_nullsafe(job);
-	}
-
- exit:
-	// Send empty messages to the threads, to make them have a look at the shutdown flag
-	job = (parseJob_t *) malloc_nullsafe(dbc->log, sizeof(parseJob_t));
-	errno = 0;
-	// Need to make a copy, as *activethreads will change when threads completes shutdown
-	actthr_cp = *activethreads;
-	for( i = 0; i < actthr_cp; i++ ) {
-		do {
-			int res;
-
-			writelog(dbc->log, LOG_DEBUG, "%s shutdown message %i of %i",
-				 (errno == EAGAIN ? "Resending" : "Sending"), i+1, *activethreads);
-			errno = 0;
-			res = mq_send(msgq, (char *) job, sizeof(parseJob_t), 1);
-			if( (res < 0) && (errno != EAGAIN) ) {
-				writelog(dbc->log, LOG_EMERG,
-					 "Could not send shutdown notification to the queue.");
-				free_nullsafe(job);
-				return rc;
-			} else if( errno == EAGAIN ) {
-				writelog(dbc->log, LOG_WARNING,
-					"Message queue filled up.  "
-					"Will not add new messages to queue for the next 10 seconds");
-				sleep(10);
-			}
-		} while( (errno == EAGAIN) );
-	}
-	free_nullsafe(job);
-	return rc;
-}
-
-
-/**
- * Prepares the program to be daemonised
- *
- * @param log   Initialised log context, where log info of the process is reported
- *
- * @return Returns 1 on success, otherwise -1
- */
-int daemonise(LogContext *log) {
-	pid_t pid, sid;
-	int i = 0;
-
-	if( (log->logtype == ltCONSOLE) ) {
-		writelog(log, LOG_EMERG,
-			 "Cannot daemonise when logging to a console (stdout: or stderr:)");
-		return -1;
-	}
-
-	pid = fork();
-	if (pid < 0) {
-		writelog(log, LOG_EMERG, "Failed to daemonise the process (fork)");
-		return -1;
-	} else if (pid > 0) {
-		writelog(log, LOG_INFO, "Daemon pid: %ld", pid);
-		exit(EXIT_SUCCESS);
-	}
-
-	umask(0);
-
-	sid = setsid();
-	if (sid < 0) {
-		writelog(log, LOG_EMERG, "Failed to daemonise the process (setsid)");
-		return -1;
-	}
-
-	if ((chdir("/")) < 0) {
-		writelog(log, LOG_EMERG, "Failed to daemonise the process (fork)");
-		return -1;
-	}
-
-	// Prepare stdin, stdout and stderr for daemon mode
-	close(2);
-	close(1);
-	close(0);
-	i = open("/dev/null", O_RDWR); /* open stdin */
-	dup(i); /* stdout */
-	dup(i); /* stderr */
-
-	writelog(log, LOG_INFO, "Daemonised successfully");
-	return 1;
-}
-
-
-/**
- * rtevald_parser main function.
- *
- * @param argc
- * @param argv
- *
- * @return Returns the result of the process_submission_queue() function.
- */
-int main(int argc, char **argv) {
-        eurephiaVALUES *config = NULL, *prgargs = NULL;
-        char xsltfile[2050], *reportdir = NULL;
-	xsltStylesheet *xslt = NULL;
-	dbconn *dbc = NULL;
-        pthread_t **threads = NULL;
-        pthread_attr_t **thread_attrs = NULL;
-	pthread_mutex_t mtx_sysreg = PTHREAD_MUTEX_INITIALIZER;
-	pthread_mutex_t mtx_thrcnt = PTHREAD_MUTEX_INITIALIZER;
-	threadData_t **thrdata = NULL;
-	struct mq_attr msgq_attr;
-	mqd_t msgq = 0;
-	int i,rc, mq_init = 0, max_threads = 0, started_threads = 0, activethreads = 0;
-	unsigned int max_report_size = 0;
-
-	// Initialise XML and XSLT libraries
-	xsltInit();
-	xmlInitParser();
-
-	prgargs = parse_arguments(argc, argv);
-	if( prgargs == NULL ) {
-		fprintf(stderr, "** ERROR **  Failed to parse program arguments\n");
-		rc = 2;
-		goto exit;
-	}
-
-	// Setup a log context
-	logctx = init_log(eGet_value(prgargs, "log"), eGet_value(prgargs, "loglevel"));
-	if( !logctx ) {
-		fprintf(stderr, "** ERROR **  Could not setup a log context\n");
-		eFree_values(prgargs);
-		rc = 2;
-		goto exit;
-	}
-
-	// Fetch configuration
-        config = read_config(logctx, prgargs, "xmlrpc_parser");
-	eFree_values(prgargs); // read_config() copies prgargs into config, we don't need prgargs anymore
-
-	// Daemonise process if requested
-	if( atoi_nullsafe(eGet_value(config, "daemon")) == 1 ) {
-		if( daemonise(logctx) < 1 ) {
-			rc = 3;
-			goto exit;
-		}
-	}
-
-
-	// Parse XSLT template
-	snprintf(xsltfile, 512, "%s/%s", eGet_value(config, "xsltpath"), XMLPARSER_XSL);
-	writelog(logctx, LOG_DEBUG, "Parsing XSLT file: %s", xsltfile);
-        xslt = xsltParseStylesheetFile((xmlChar *) xsltfile);
-	if( !xslt ) {
-		writelog(logctx, LOG_EMERG, "Could not parse XSLT template: %s", xsltfile);
-		rc = 2;
-		goto exit;
-	}
-
-	// Open a POSIX MQ
-	writelog(logctx, LOG_DEBUG, "Preparing POSIX MQ queue: /rteval_parsequeue");
-	memset(&msgq, 0, sizeof(mqd_t));
-	msgq_attr.mq_maxmsg = get_mqueue_msg_max(logctx);
-	msgq_attr.mq_msgsize = sizeof(parseJob_t);
-	msgq_attr.mq_flags = O_NONBLOCK;
-	msgq = mq_open("/rteval_parsequeue", O_RDWR | O_CREAT, 0600, &msgq_attr);
-	if( msgq < 0 ) {
-		writelog(logctx, LOG_EMERG,
-			 "Could not open message queue: %s", strerror(errno));
-		rc = 2;
-		goto exit;
-	}
-	mq_init = 1;
-
-	// Get the number of worker threads
-	max_threads = atoi_nullsafe(eGet_value(config, "threads"));
-	if( max_threads == 0 ) {
-		max_threads = 4;
-	}
-
-	// Get a database connection for the main thread
-        dbc = db_connect(config, max_threads, logctx);
-        if( !dbc ) {
-		rc = 4;
-		goto exit;
-        }
-
-	// Prepare all threads
-	threads = calloc(max_threads + 1, sizeof(pthread_t *));
-	thread_attrs = calloc(max_threads + 1, sizeof(pthread_attr_t *));
-	thrdata = calloc(max_threads + 1, sizeof(threadData_t *));
-	assert( (threads != NULL) && (thread_attrs != NULL) && (thrdata != NULL) );
-
-	reportdir = eGet_value(config, "reportdir");
-	writelog(logctx, LOG_INFO, "Starting %i worker threads", max_threads);
-	max_report_size = defaultIntValue(atoi_nullsafe(eGet_value(config, "max_report_size")), 1024*1024);
-	for( i = 0; i < max_threads; i++ ) {
-		// Prepare thread specific data
-		thrdata[i] = malloc_nullsafe(logctx, sizeof(threadData_t));
-		if( !thrdata[i] ) {
-			writelog(logctx, LOG_EMERG,
-				 "Could not allocate memory for thread data");
-			rc = 2;
-			goto exit;
-		}
-
-		// Get a database connection for the thread
-		thrdata[i]->dbc = db_connect(config, i, logctx);
-		if( !thrdata[i]->dbc ) {
-			writelog(logctx, LOG_EMERG,
-				"Could not connect to the database for thread %i", i);
-			rc = 2;
-			shutdown = 1;
-			goto exit;
-		}
-
-		// Parse the measurement_tables config variable, split it up into an array
-		thrdata[i]->dbc->measurement_tbls = strSplit(eGet_value(config, "measurement_tables"), ", ");
-		if( !thrdata[i]->dbc->measurement_tbls ) {
-			writelog(dbc->log, LOG_CRIT, "Failed to parse measurement_tables configuration");
-			rc = 2;
-			shutdown = 1;
-			goto exit;
-		}
-
-		thrdata[i]->shutdown = &shutdown;
-		thrdata[i]->threadcount = &activethreads;
-		thrdata[i]->mtx_thrcnt = &mtx_thrcnt;
-		thrdata[i]->id = i;
-		thrdata[i]->msgq = msgq;
-		thrdata[i]->mtx_sysreg = &mtx_sysreg;
-		thrdata[i]->xslt = xslt;
-		thrdata[i]->destdir = reportdir;
-		thrdata[i]->max_report_size = max_report_size;
-
-		thread_attrs[i] = malloc_nullsafe(logctx, sizeof(pthread_attr_t));
-		if( !thread_attrs[i] ) {
-			writelog(logctx, LOG_EMERG,
-				"Could not allocate memory for thread attributes");
-			rc = 2;
-			goto exit;
-		}
-		pthread_attr_init(thread_attrs[i]);
-		pthread_attr_setdetachstate(thread_attrs[i], PTHREAD_CREATE_JOINABLE);
-
-		threads[i] = malloc_nullsafe(logctx, sizeof(pthread_t));
-		if( !threads[i] ) {
-			writelog(logctx, LOG_EMERG,
-				"Could not allocate memory for pthread_t");
-			rc = 2;
-			goto exit;
-		}
-	}
-
-	// Setup signal catching
-	signal(SIGINT,  sigcatch);
-	signal(SIGTERM, sigcatch);
-	signal(SIGHUP,  SIG_IGN);
-	signal(SIGUSR1, sigcatch);
-	signal(SIGUSR2, SIG_IGN);
-
-	// Start the threads
-	for( i = 0; i < max_threads; i++ ) {
-		int thr_rc = pthread_create(threads[i], thread_attrs[i], parsethread, thrdata[i]);
-		if( thr_rc < 0 ) {
-			writelog(logctx, LOG_EMERG,
-				 "** ERROR **  Failed to start thread %i: %s",
-				 i, strerror(thr_rc));
-			rc = 3;
-			goto exit;
-		}
-		started_threads++;
-	}
-
-	// Main routine
-	//
-	// checks the submission queue and puts unprocessed records on the POSIX MQ
-	// to be parsed by one of the threads
-	//
-	sleep(3); // Allow at least a few parser threads to settle down first before really starting
-	writelog(logctx, LOG_DEBUG, "Starting submission queue checker");
-	rc = process_submission_queue(dbc, msgq, &activethreads);
-	writelog(logctx, LOG_DEBUG, "Submission queue checker shut down");
-
- exit:
-	// Clean up all threads
-	for( i = 0; i < max_threads; i++ ) {
-		// Wait for all threads to exit
-		if( (i < started_threads) && threads && threads[i] ) {
-			void *thread_rc;
-			int j_rc;
-
-			if( (j_rc = pthread_join(*threads[i], &thread_rc)) != 0 ) {
-				writelog(logctx, LOG_CRIT,
-					 "Failed to join thread %i: %s",
-					 i, strerror(j_rc));
-			}
-			pthread_attr_destroy(thread_attrs[i]);
-		}
-		if( threads ) {
-			free_nullsafe(threads[i]);
-		}
-		if( thread_attrs ) {
-			free_nullsafe(thread_attrs[i]);
-		}
-
-		// Disconnect threads database connection
-		if( thrdata && thrdata[i] ) {
-			strFree(thrdata[i]->dbc->measurement_tbls);
-			db_disconnect(thrdata[i]->dbc);
-			free_nullsafe(thrdata[i]);
-		}
-	}
-	free_nullsafe(thrdata);
-	free_nullsafe(threads);
-	free_nullsafe(thread_attrs);
-
-	// Close message queue
-	if( mq_init == 1 ) {
-		errno = 0;
-		if( mq_close(msgq) < 0 ) {
-			writelog(logctx, LOG_CRIT, "Failed to close message queue: %s",
-				 strerror(errno));
-		}
-		errno = 0;
-		if( mq_unlink("/rteval_parsequeue") < 0 ) {
-			writelog(logctx, LOG_ALERT, "Failed to remove the message queue: %s",
-				 strerror(errno));
-		}
-	}
-
-	// Disconnect from database, main thread connection
-	db_disconnect(dbc);
-
-	// Free up the rest
-	eFree_values(config);
-	xsltFreeStylesheet(xslt);
-	xmlCleanupParser();
-	xsltCleanupGlobals();
-
-	writelog(logctx, LOG_EMERG, "rteval-parserd is stopped");
-	close_log(logctx);
-	return rc;
-}
-
diff --git a/server/parser/rteval-parserd.init b/server/parser/rteval-parserd.init
deleted file mode 100755
index a7da9db..0000000
--- a/server/parser/rteval-parserd.init
+++ /dev/null
@@ -1,126 +0,0 @@ 
-#!/bin/bash
-#
-# rteval-parserd  rteval report parser daemon
-#
-# Author:      David Sommerseth <davids@redhat.com>
-#
-# Copyright 2009 Red Hat, Inc. and/or its affiliates.
-# Released under the GPL
-#
-# chkconfig: - 20 80
-# description: The rteval-parserd waits for rteval summary reports and parses them on arrival
-# config: /etc/sysconfig/rteval-parserd
-#
-### BEGIN INIT INFO
-# Provides: rteval-parserd
-# Required-Start: postgresql
-# Required-Stop: -
-# Default-Stop: 0 1 6
-# Short-Description: start and stop rteval-parserd
-# Description: The rteval-parserd waits for rteval summary reports and parses them on arrival
-### END INIT INFO
-
-. /etc/rc.d/init.d/functions
-
-if [ -f /etc/sysconfig/rteval-parserd ]; then
-    . /etc/sysconfig/rteval-parserd
-fi
-
-prog=rteval-parserd
-RETVAL=0
-
-if [ -z $PIDFILE ]; then
-    PIDFILE=/var/run/$prog.pid
-fi
-
-start() {
-    # Check if we have a pid file, if we do check that it is correct
-    if [ -f $PIDFILE ]; then
-	filepid=$(cat $PIDFILE)
-	chkpid=$(pidof $prog)
-	if [ $? = 0 ]; then
-	    if [ "$chkpid" != "$filepid" ] ; then
-		# We have a pid file which is not correct, fix it
-		echo $chkpid > $PIDFILE
-		filepid=$chkpid
-	    fi
-	    echo "$prog is already started (pid $filepid)"
-	    return 0
-	else
-	    # No process really exists, clean up!
-	    rm -f $PIDFILE
-	fi
-    fi
-
-    # Start a new daemon
-    args="--daemon"
-    if [ -z "$NUM_THREADS" ]; then
-	# If NUM_THREADS is not set, use number of cores found.
-	NUM_THREADS=$(find /sys/devices/system/cpu/cpu? -maxdepth 0 -type d | wc -l)
-    fi
-    args="$args --threads $NUM_THREADS"
-
-    if [ ! -z "$LOG" ]; then
-	args="$args --log $LOG"
-    fi
-
-    if [ ! -z "$LOGLEVEL" ]; then
-	args="$args --log-level $LOGLEVEL"
-    fi
-
-    if [ ! -z "$CONFIGFILE" ]; then
-	args="$args --config $CONFIGFILE"
-    fi
-    echo -n $"Starting $prog ($NUM_THREADS threads): "
-    $prog $args
-    pidof $prog > $PIDFILE
-    RETVAL=$?
-    [ $RETVAL = 0 ] && success $"$prog startup" || failure $"$prog startup"
-    [ $RETVAL = 0 ] && touch /var/lock/subsys/$prog
-    echo
-    return $RETVAL
-}
-
-stop() {
-    echo -n $"Stopping $prog: "
-    if [ ! -f $PIDFILE ]; then
-	chkpid=$(pidof $prog)
-	if [ $? = 0 ]; then
-	    PID=$chkpid
-	fi
-    else
-	PID=$(cat $PIDFILE)
-    fi
-    kill -TERM $PID
-    RETVAL=$?
-    [ $RETVAL = 0 ] && success $"$prog shutdown" || failure $"$prog (pid $PID) shutdown"
-    [ $RETVAL = 0 ] && rm -f /var/lock/subsys/$prog $PIDFILE
-    echo
-}
-
-case "$1" in
-  start)
-	start
-	;;
-  stop)
-	stop
-	;;
-  status)
-        status $prog
-	;;
-  restart)
-	stop
-	start
-	;;
-  reload)
-	stop
-	start
-	;;
-  condrestart)
-        ;;
-  *)
-	echo $"Usage: $prog {start|stop|restart|reload|status|help}"
-	RETVAL=3
-esac
-
-exit $RETVAL
diff --git a/server/parser/rteval-parserd.sysconfig b/server/parser/rteval-parserd.sysconfig
deleted file mode 100644
index c57f48c..0000000
--- a/server/parser/rteval-parserd.sysconfig
+++ /dev/null
@@ -1,23 +0,0 @@ 
-# Configuration parameters for rteval-parserd
-
-# *** Number of worker threads
-# * When this is not set, the default will be one thread per CPU core
-# NUM_THREADS=2
-
-# *** Logging
-# * Valid values: syslog:[facility] or a file name (full path)
-# * Valid facility values: daemon, user and local0 to local7
-# * Default facility will be daemon
-LOG=syslog:
-
-# *** Log level
-# * Valid values: emerg, alert, crit, error, warn, notice, info, debug
-LOGLEVEL=notice
-
-# *** rteval configuration file
-# * Default value when not set is /etc/rteval.conf
-# CONFIGFILE=/etc/rteval.conf
-
-# *** PID file
-# * Full path to where to look for the PID file, defaults to /var/run/rteval-parserd.pid
-# PIDFILE=/var/run/rteval-parserd.pid
diff --git a/server/parser/sha1.c b/server/parser/sha1.c
deleted file mode 100644
index 3f77aa9..0000000
--- a/server/parser/sha1.c
+++ /dev/null
@@ -1,615 +0,0 @@ 
-/*-
- * Copyright (c) 2001-2003 Allan Saddi <allan@saddi.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALLAN SADDI AND HIS CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL ALLAN SADDI OR HIS CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $Id: sha1.c 680 2003-07-25 21:57:38Z asaddi $
- */
-
-/*
- * Define WORDS_BIGENDIAN if compiling on a big-endian architecture.
- *
- * Define SHA1_TEST to test the implementation using the NIST's
- * sample messages. The output should be:
- *
- *   a9993e36 4706816a ba3e2571 7850c26c 9cd0d89d
- *   84983e44 1c3bd26e baae4aa1 f95129e5 e54670f1
- *   34aa973c d4c4daa4 f61eeb2b dbad2731 6534016f
- */
-
-#include <stdint.h>
-#include <string.h>
-
-#include "sha1.h"
-
-#ifndef lint
-static const char rcsid[] =
-	"$Id: sha1.c 680 2003-07-25 21:57:38Z asaddi $";
-#endif /* !lint */
-
-#define ROTL(x, n) (((x) << (n)) | ((x) >> (32 - (n))))
-#define ROTR(x, n) (((x) >> (n)) | ((x) << (32 - (n))))
-
-#define F_0_19(x, y, z) ((z) ^ ((x) & ((y) ^ (z))))
-#define F_20_39(x, y, z) ((x) ^ (y) ^ (z))
-#define F_40_59(x, y, z) (((x) & ((y) | (z))) | ((y) & (z)))
-#define F_60_79(x, y, z) ((x) ^ (y) ^ (z))
-
-#define DO_ROUND(F, K) { \
-  temp = ROTL(a, 5) + F(b, c, d) + e + *(W++) + K; \
-  e = d; \
-  d = c; \
-  c = ROTL(b, 30); \
-  b = a; \
-  a = temp; \
-}
-
-#define K_0_19 0x5a827999L
-#define K_20_39 0x6ed9eba1L
-#define K_40_59 0x8f1bbcdcL
-#define K_60_79 0xca62c1d6L
-
-#ifndef RUNTIME_ENDIAN
-
-#ifdef WORDS_BIGENDIAN
-
-#define BYTESWAP(x) (x)
-#define BYTESWAP64(x) (x)
-
-#else /* WORDS_BIGENDIAN */
-
-#define BYTESWAP(x) ((ROTR((x), 8) & 0xff00ff00L) | \
-		     (ROTL((x), 8) & 0x00ff00ffL))
-#define BYTESWAP64(x) _byteswap64(x)
-
-static inline uint64_t _byteswap64(uint64_t x)
-{
-  uint32_t a = x >> 32;
-  uint32_t b = (uint32_t) x;
-  return ((uint64_t) BYTESWAP(b) << 32) | (uint64_t) BYTESWAP(a);
-}
-
-#endif /* WORDS_BIGENDIAN */
-
-#else /* !RUNTIME_ENDIAN */
-
-#define BYTESWAP(x) _byteswap(sc->littleEndian, x)
-#define BYTESWAP64(x) _byteswap64(sc->littleEndian, x)
-
-#define _BYTESWAP(x) ((ROTR((x), 8) & 0xff00ff00L) | \
-		      (ROTL((x), 8) & 0x00ff00ffL))
-#define _BYTESWAP64(x) __byteswap64(x)
-
-static inline uint64_t __byteswap64(uint64_t x)
-{
-  uint32_t a = x >> 32;
-  uint32_t b = (uint32_t) x;
-  return ((uint64_t) _BYTESWAP(b) << 32) | (uint64_t) _BYTESWAP(a);
-}
-
-static inline uint32_t _byteswap(int littleEndian, uint32_t x)
-{
-  if (!littleEndian)
-    return x;
-  else
-    return _BYTESWAP(x);
-}
-
-static inline uint64_t _byteswap64(int littleEndian, uint64_t x)
-{
-  if (!littleEndian)
-    return x;
-  else
-    return _BYTESWAP64(x);
-}
-
-static inline void setEndian(int *littleEndianp)
-{
-  union {
-    uint32_t w;
-    uint8_t b[4];
-  } endian;
-
-  endian.w = 1L;
-  *littleEndianp = endian.b[0] != 0;
-}
-
-#endif /* !RUNTIME_ENDIAN */
-
-static const uint8_t padding[64] = {
-  0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-void
-SHA1Init (SHA1Context *sc)
-{
-#ifdef RUNTIME_ENDIAN
-  setEndian (&sc->littleEndian);
-#endif /* RUNTIME_ENDIAN */
-
-  sc->totalLength = 0LL;
-  sc->hash[0] = 0x67452301L;
-  sc->hash[1] = 0xefcdab89L;
-  sc->hash[2] = 0x98badcfeL;
-  sc->hash[3] = 0x10325476L;
-  sc->hash[4] = 0xc3d2e1f0L;
-  sc->bufferLength = 0L;
-}
-
-static void
-burnStack (int size)
-{
-  char buf[128];
-
-  memset (buf, 0, sizeof (buf));
-  size -= sizeof (buf);
-  if (size > 0)
-    burnStack (size);
-}
-
-static void
-SHA1Guts (SHA1Context *sc, const uint32_t *cbuf)
-{
-  uint32_t buf[80];
-  uint32_t *W, *W3, *W8, *W14, *W16;
-  uint32_t a, b, c, d, e, temp;
-  int i;
-
-  W = buf;
-
-  for (i = 15; i >= 0; i--) {
-    *(W++) = BYTESWAP(*cbuf);
-    cbuf++;
-  }
-
-  W16 = &buf[0];
-  W14 = &buf[2];
-  W8 = &buf[8];
-  W3 = &buf[13];
-
-  for (i = 63; i >= 0; i--) {
-    *W = *(W3++) ^ *(W8++) ^ *(W14++) ^ *(W16++);
-    *W = ROTL(*W, 1);
-    W++;
-  }
-
-  a = sc->hash[0];
-  b = sc->hash[1];
-  c = sc->hash[2];
-  d = sc->hash[3];
-  e = sc->hash[4];
-
-  W = buf;
-
-#ifndef SHA1_UNROLL
-#define SHA1_UNROLL 20
-#endif /* !SHA1_UNROLL */
-
-#if SHA1_UNROLL == 1
-  for (i = 19; i >= 0; i--)
-    DO_ROUND(F_0_19, K_0_19);
-
-  for (i = 19; i >= 0; i--)
-    DO_ROUND(F_20_39, K_20_39);
-
-  for (i = 19; i >= 0; i--)
-    DO_ROUND(F_40_59, K_40_59);
-
-  for (i = 19; i >= 0; i--)
-    DO_ROUND(F_60_79, K_60_79);
-#elif SHA1_UNROLL == 2
-  for (i = 9; i >= 0; i--) {
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-  }
-
-  for (i = 9; i >= 0; i--) {
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-  }
-
-  for (i = 9; i >= 0; i--) {
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-  }
-
-  for (i = 9; i >= 0; i--) {
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-  }
-#elif SHA1_UNROLL == 4
-  for (i = 4; i >= 0; i--) {
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-  }
-
-  for (i = 4; i >= 0; i--) {
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-  }
-
-  for (i = 4; i >= 0; i--) {
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-  }
-
-  for (i = 4; i >= 0; i--) {
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-  }
-#elif SHA1_UNROLL == 5
-  for (i = 3; i >= 0; i--) {
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-  }
-
-  for (i = 3; i >= 0; i--) {
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-  }
-
-  for (i = 3; i >= 0; i--) {
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-  }
-
-  for (i = 3; i >= 0; i--) {
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-  }
-#elif SHA1_UNROLL == 10
-  for (i = 1; i >= 0; i--) {
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-    DO_ROUND(F_0_19, K_0_19);
-  }
-
-  for (i = 1; i >= 0; i--) {
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-    DO_ROUND(F_20_39, K_20_39);
-  }
-
-  for (i = 1; i >= 0; i--) {
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-    DO_ROUND(F_40_59, K_40_59);
-  }
-
-  for (i = 1; i >= 0; i--) {
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-    DO_ROUND(F_60_79, K_60_79);
-  }
-#elif SHA1_UNROLL == 20
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-  DO_ROUND(F_0_19, K_0_19);
-
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-  DO_ROUND(F_20_39, K_20_39);
-
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-  DO_ROUND(F_40_59, K_40_59);
-
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-  DO_ROUND(F_60_79, K_60_79);
-#else /* SHA1_UNROLL */
-#error SHA1_UNROLL must be 1, 2, 4, 5, 10 or 20!
-#endif
-
-  sc->hash[0] += a;
-  sc->hash[1] += b;
-  sc->hash[2] += c;
-  sc->hash[3] += d;
-  sc->hash[4] += e;
-}
-
-void
-SHA1Update (SHA1Context *sc, const void *vdata, uint32_t len)
-{
-  const uint8_t *data = vdata;
-  uint32_t bufferBytesLeft;
-  uint32_t bytesToCopy;
-  int needBurn = 0;
-
-#ifdef SHA1_FAST_COPY
-  if (sc->bufferLength) {
-    bufferBytesLeft = 64L - sc->bufferLength;
-
-    bytesToCopy = bufferBytesLeft;
-    if (bytesToCopy > len)
-      bytesToCopy = len;
-
-    memcpy (&sc->buffer.bytes[sc->bufferLength], data, bytesToCopy);
-
-    sc->totalLength += bytesToCopy * 8L;
-
-    sc->bufferLength += bytesToCopy;
-    data += bytesToCopy;
-    len -= bytesToCopy;
-
-    if (sc->bufferLength == 64L) {
-      SHA1Guts (sc, sc->buffer.words);
-      needBurn = 1;
-      sc->bufferLength = 0L;
-    }
-  }
-
-  while (len > 63) {
-    sc->totalLength += 512L;
-
-    SHA1Guts (sc, data);
-    needBurn = 1;
-
-    data += 64L;
-    len -= 64L;
-  }
-
-  if (len) {
-    memcpy (&sc->buffer.bytes[sc->bufferLength], data, len);
-
-    sc->totalLength += len * 8L;
-
-    sc->bufferLength += len;
-  }
-#else /* SHA1_FAST_COPY */
-  while (len) {
-    bufferBytesLeft = 64L - sc->bufferLength;
-
-    bytesToCopy = bufferBytesLeft;
-    if (bytesToCopy > len)
-      bytesToCopy = len;
-
-    memcpy (&sc->buffer.bytes[sc->bufferLength], data, bytesToCopy);
-
-    sc->totalLength += bytesToCopy * 8L;
-
-    sc->bufferLength += bytesToCopy;
-    data += bytesToCopy;
-    len -= bytesToCopy;
-
-    if (sc->bufferLength == 64L) {
-      SHA1Guts (sc, sc->buffer.words);
-      needBurn = 1;
-      sc->bufferLength = 0L;
-    }
-  }
-#endif /* SHA1_FAST_COPY */
-
-  if (needBurn)
-    burnStack (sizeof (uint32_t[86]) + sizeof (uint32_t *[5]) + sizeof (int));
-}
-
-void
-SHA1Final (SHA1Context *sc, uint8_t hash[SHA1_HASH_SIZE])
-{
-  uint32_t bytesToPad;
-  uint64_t lengthPad;
-  int i;
-
-  bytesToPad = 120L - sc->bufferLength;
-  if (bytesToPad > 64L)
-    bytesToPad -= 64L;
-
-  lengthPad = BYTESWAP64(sc->totalLength);
-
-  SHA1Update (sc, padding, bytesToPad);
-  SHA1Update (sc, &lengthPad, 8L);
-
-  if (hash) {
-    for (i = 0; i < SHA1_HASH_WORDS; i++) {
-#ifdef SHA1_FAST_COPY
-      *((uint32_t *) hash) = BYTESWAP(sc->hash[i]);
-#else /* SHA1_FAST_COPY */
-      hash[0] = (uint8_t) (sc->hash[i] >> 24);
-      hash[1] = (uint8_t) (sc->hash[i] >> 16);
-      hash[2] = (uint8_t) (sc->hash[i] >> 8);
-      hash[3] = (uint8_t) sc->hash[i];
-#endif /* SHA1_FAST_COPY */
-      hash += 4;
-    }
-  }
-}
-
-#ifdef SHA1_TEST
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-int
-main (int argc, char *argv[])
-{
-  SHA1Context foo;
-  uint8_t hash[SHA1_HASH_SIZE];
-  char buf[1000];
-  int i;
-
-  SHA1Init (&foo);
-  SHA1Update (&foo, "abc", 3);
-  SHA1Final (&foo, hash);
-
-  for (i = 0; i < SHA1_HASH_SIZE;) {
-    printf ("%02x", hash[i++]);
-    if (!(i % 4))
-      printf (" ");
-  }
-  printf ("\n");
-
-  SHA1Init (&foo);
-  SHA1Update (&foo,
-		"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
-		56);
-  SHA1Final (&foo, hash);
-
-  for (i = 0; i < SHA1_HASH_SIZE;) {
-    printf ("%02x", hash[i++]);
-    if (!(i % 4))
-      printf (" ");
-  }
-  printf ("\n");
-
-  SHA1Init (&foo);
-  memset (buf, 'a', sizeof (buf));
-  for (i = 0; i < 1000; i++)
-    SHA1Update (&foo, buf, sizeof (buf));
-  SHA1Final (&foo, hash);
-
-  for (i = 0; i < SHA1_HASH_SIZE;) {
-    printf ("%02x", hash[i++]);
-    if (!(i % 4))
-      printf (" ");
-  }
-  printf ("\n");
-
-  exit (0);
-}
-
-#endif /* SHA1_TEST */
diff --git a/server/parser/sha1.h b/server/parser/sha1.h
deleted file mode 100644
index 9ce5bd6..0000000
--- a/server/parser/sha1.h
+++ /dev/null
@@ -1,66 +0,0 @@ 
-/*-
- * Copyright (c) 2001-2003 Allan Saddi <allan@saddi.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY ALLAN SADDI AND HIS CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL ALLAN SADDI OR HIS CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * $Id: sha1.h 347 2003-02-23 22:11:49Z asaddi $
- */
-
-#ifndef _SHA1_H
-#define _SHA1_H
-
-#include <stdint.h>
-
-#define SHA1_HASH_SIZE 20
-
-/* Hash size in 32-bit words */
-#define SHA1_HASH_WORDS 5
-
-struct _SHA1Context {
-  uint64_t totalLength;
-  uint32_t hash[SHA1_HASH_WORDS];
-  uint32_t bufferLength;
-  union {
-    uint32_t words[16];
-    uint8_t bytes[64];
-  } buffer;
-#ifdef RUNTIME_ENDIAN
-  int littleEndian;
-#endif /* RUNTIME_ENDIAN */
-};
-
-typedef struct _SHA1Context SHA1Context;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void SHA1Init (SHA1Context *sc);
-void SHA1Update (SHA1Context *sc, const void *data, uint32_t len);
-void SHA1Final (SHA1Context *sc, uint8_t hash[SHA1_HASH_SIZE]);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _SHA1_H */
diff --git a/server/parser/statuses.h b/server/parser/statuses.h
deleted file mode 100644
index a1beef6..0000000
--- a/server/parser/statuses.h
+++ /dev/null
@@ -1,33 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   statuses.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   Wed Oct 21 11:17:24 2009
- *
- * @brief  Status values used by rteval-parserd
- *
- */
-
-#ifndef _RTEVAL_STATUS_H
-#define _RTEVAL_STATUS_H
-
-#define STAT_NEW       0         /**< New, unparsed report in the submission queue */
-#define STAT_ASSIGNED  1         /**< Submission is assigned to a parser */
-#define STAT_INPROG    2         /**< Parsing has started */
-#define STAT_SUCCESS   3         /**< Report parsed successfully */
-#define STAT_UNKNFAIL  4         /**< Unkown failure */
-#define STAT_XMLFAIL   5         /**< Failed to parse the report XML file */
-#define STAT_SYSREG    6         /**< System registration failed */
-#define STAT_RTERIDREG 7         /**< Failed to get a new rterid value for the rteval run */
-#define STAT_GENDB     8         /**< General database error */
-#define STAT_RTEVRUNS  9         /**< Registering rteval run information failed */
-#define STAT_MEASURE   10        /**< Registering measurement results failed */
-#define STAT_REPMOVE   11        /**< Failed to move the report file */
-#define STAT_FTOOBIG   12        /**< Report is too big (see config parameter: max_report_size) */
-
-#endif
diff --git a/server/parser/threadinfo.h b/server/parser/threadinfo.h
deleted file mode 100644
index 53c4e7d..0000000
--- a/server/parser/threadinfo.h
+++ /dev/null
@@ -1,38 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- */
-
-/**
- * @file   threadinfo.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   Thu Oct 15 11:47:51 2009
- *
- * @brief  Shared info between the main() and parsethread() functions
- *
- */
-
-#ifndef _THREADINFO_H
-#define _THREADINFO_H
-
-#include <mqueue.h>
-#include <libxslt/transform.h>
-
-/**
- *  Thread slot information.  Each thread slot is assigned with one threadData_t element.
- */
-typedef struct {
-        int *shutdown;                /**< If set to 1, the thread should shut down */
-        int *threadcount;             /**< Number of active worker threads */
-        pthread_mutex_t *mtx_thrcnt;  /**< Mutex lock for updating active worker threads */
-        mqd_t msgq;                   /**< POSIX MQ descriptor */
-        pthread_mutex_t *mtx_sysreg;  /**< Mutex locking, to avoid clashes with registering systems */
-        unsigned int id;              /**< Numeric ID for this thread */
-        dbconn *dbc;                  /**< Database connection assigned to this thread */
-        xsltStylesheet *xslt;         /**< XSLT stylesheet assigned to this thread */
-        const char *destdir;          /**< Directory where to put the parsed reports */
-        unsigned int max_report_size; /**< Maximum accepted file size of reports (config: max_report_size) */
-} threadData_t;
-
-#endif
diff --git a/server/parser/xmlparser.c b/server/parser/xmlparser.c
deleted file mode 100644
index 1ea7377..0000000
--- a/server/parser/xmlparser.c
+++ /dev/null
@@ -1,620 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- * David Sommerseth <davids@redhat.com>
- *
- * Parses summary.xml reports from rteval into a standardised XML format
- * which is useful when putting data into a database.
- *
- */
-
-/**
- * @file   xmlparser.c
- * @author David Sommerseth <davids@redhat.com>
- * @date   Wed Oct 21 10:58:53 2009
- *
- * @brief Parses summary.xml reports from rteval into a standardised XML format
- *        which is useful when putting data into a database.
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include <libxml/tree.h>
-#include <libxslt/xsltInternals.h>
-#include <libxslt/transform.h>
-#include <libxslt/xsltutils.h>
-#include <libexslt/exslt.h>
-
-#include <eurephia_nullsafe.h>
-#include <eurephia_xml.h>
-#include <xmlparser.h>
-#include <sha1.h>
-#include <log.h>
-
-static dbhelper_func const * xmlparser_dbhelpers = NULL;
-
-/**
- * Simple strdup() function which encapsulates the string in single quotes,
- * which is needed for XSLT parameter values
- *
- * @param str The string to be strdup'ed and encapsulated
- *
- * @return Returns a pointer to the new buffer.
- */
-static char *encapsString(const char *str) {
-        char *ret = NULL;
-
-        if( str == NULL ) {
-                return NULL;
-        }
-
-        ret = (char *) calloc(1, strlen(str)+4);
-        assert( ret != NULL );
-
-        snprintf(ret, strlen(str)+3, "'%s'", str);
-        return ret;
-}
-
-
-/**
- * Converts an integer to string an encapsulates the value in single quotes,
- * which is needed for XSLT parameter values.
- *
- * @param val Integer value to encapsulate
- *
- * @return Returns a pointer to a new buffer with the encapsulated integer value.  This
- *         buffer must be free'd after usage.
- */
-static char *encapsInt(const unsigned int val) {
-        char *buf = NULL;
-
-        buf = (char *) calloc(1, 130);
-        snprintf(buf, 128, "'%i'", val);
-        return buf;
-}
-
-
-/**
- * Simple function to determine if the given string is a number or not
- *
- * @param str Pointer to the tring to be checked
- *
- * @returns Returns 0 if not a number and a non-null value if it is a number
- */
-int isNumber(const char * str)
-{
-    char *ptr = NULL;
-
-    if (str == NULL || *str == '\0' || isspace(*str))
-      return 0;
-
-    strtod (str, &ptr);
-    return *ptr == '\0';
-}
-
-
-/**
- * Split a string into an array.
- * Use strGet() to extract the results and strFree() to free the memory
- * allocated by strSplit()
- *
- * @param str Input string
- * @param sep Separator list (string)
- *
- * @returns Returns a pointer to a array_str_t struct on success, otherwise NULL
- */
-array_str_t * strSplit(const char * str, const char * sep)
-{
-        array_str_t * ret = calloc(1, sizeof(array_str_t));
-        char * p = NULL, *cp = strdup(str);
-
-        if( !ret || !cp ) {
-                fprintf(stderr, "Memory allocation error in strSplit()\n");
-                return NULL;
-        }
-
-        p = strtok(cp, sep);
-        while( p ) {
-                ret->data = realloc(ret->data, sizeof(char *) * ++(ret->size));
-                if( !ret->data ) {
-                        fprintf(stderr, "Memory allocation error in strSplit() while parsing\n");
-                        free(ret);
-                        return NULL;
-                }
-                ret->data[ret->size-1] = strdup(p);
-                p = strtok(NULL, sep);
-        }
-        free(cp);
-        return ret;
-}
-
-/**
- * Retrieve an array memeber
- *
- * @param ar Pointer holding the array_str_t data
- * @param el Element number to retrive
- *
- * @returns Returns a pointer to the array member.  This value must never be freed.
- * On failure NULL is returned.  Only possible failures are out-of-range or a NULL
- * array input.
- */
-inline char * strGet(array_str_t * ar, unsigned int el)
-{
-        return (!ar && (el > ar->size) ? NULL : ar->data[el]);
-}
-
-/**
- * Retrive number of accessible array members
- *
- * @param ar Pointer holding the array_str_t data
- *
- * @returns Returns the number of elements in the array_str_t struct.
- *          If a NULL pointer is given, it will return 0.
- */
-inline unsigned int strSize(array_str_t * ar)
-{
-        return (!ar ? 0 : ar->size);
-}
-
-/**
- * Frees up the memory held by an array_str_t struct.
- *
- * @params ar Pointer holding the array_str_t data to be freed
- *
- */
-void strFree(array_str_t * ar)
-{
-        int i = 0;
-
-        if( !ar ) {
-                return;
-        }
-
-        for( i = 0; i < ar->size; i++ ) {
-                free(ar->data[i]);
-                ar->data[i] = NULL;
-        }
-        free(ar->data); ar->data = NULL;
-        free(ar);
-}
-
-/**
- * Initialise the XML parser, setting some global variables
- */
-void init_xmlparser(dbhelper_func const * dbhelpers)
-{
-	xmlparser_dbhelpers = dbhelpers;
-
-        /* Init libxml2 and load all exslt functions */
-        xmlInitMemory();
-        exsltRegisterAll();
-}
-
-
-/**
- * Parses any XML input document into a sqldata XML format which can be used by pgsql_INSERT().
- * The transformation must be defined in the input XSLT template.
- *
- * @param log       Log context
- * @param xslt      XSLT template defining the data transformation
- * @param indata_d  Input XML data to transform to a sqldata XML document
- * @param params    Parameters to be sent to the XSLT parser
- *
- * @return Returns a well formed sqldata XML document on success, otherwise NULL is returned.
- */
-xmlDoc *parseToSQLdata(LogContext *log, xsltStylesheet *xslt, xmlDoc *indata_d, parseParams *params) {
-        xmlDoc *result_d = NULL;
-        char **xsltparams = NULL;
-        unsigned int idx = 0, idx_table = 0, idx_submid = 0,
-		idx_syskey = 0, idx_rterid = 0, idx_repfname = 0;
-
-        xsltparams = calloc(10, sizeof(char *));
-
-        if( xmlparser_dbhelpers == NULL ) {
-                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
-                return NULL;
-        }
-
-        if( params->table == NULL ) {
-                writelog(log, LOG_ERR, "Table is not defined");
-                return NULL;
-        }
-
-        // Prepare XSLT parameters
-        xsltparams[idx++] = "table\0";
-        xsltparams[idx] = (char *) encapsString(params->table);
-        idx_table = idx++;
-
-        if( params->submid > 0) {
-                xsltparams[idx++] = "submid\0";
-                xsltparams[idx] = (char *) encapsInt(params->submid);
-                idx_submid = idx++;
-        }
-
-        if( params->syskey > 0) {
-                xsltparams[idx++] = "syskey\0";
-                xsltparams[idx] = (char *) encapsInt(params->syskey);
-                idx_syskey = idx++;
-        }
-
-        if( params->rterid > 0 ) {
-                xsltparams[idx++] = "rterid";
-                xsltparams[idx] = (char *) encapsInt(params->rterid);
-                idx_rterid = idx++;
-        }
-
-        if( params->report_filename ) {
-                xsltparams[idx++] = "report_filename";
-                xsltparams[idx] = (char *) encapsString(params->report_filename);
-                idx_repfname = idx++;
-        }
-        xsltparams[idx] = NULL;
-
-        // Apply the XSLT template to the input XML data
-        result_d = xsltApplyStylesheet(xslt, indata_d, (const char **)xsltparams);
-        if( result_d == NULL ) {
-                writelog(log, LOG_CRIT, "Failed applying XSLT template to input XML");
-        }
-
-        // Free memory we allocated via encapsString()/encapsInt()
-        free(xsltparams[idx_table]);
-        if( params->submid ) {
-                free(xsltparams[idx_submid]);
-        }
-        if( params->syskey ) {
-                free(xsltparams[idx_syskey]);
-        }
-        if( params->rterid ) {
-                free(xsltparams[idx_rterid]);
-        }
-        if( params->report_filename ) {
-                free(xsltparams[idx_repfname]);
-        }
-
-        free(xsltparams);
-        return result_d;
-}
-
-
-/**
- * Internal xmlparser function.   Extracts the value from a '//sqldata/records/record/value'
- * node and hashes the value if the 'hash' attribute is set.  Otherwise the value is extracted
- * from the node directly.  This function is only used by sqldataExtractContent().
- *
- * @param sql_n sqldata values node containing the value to extract.
- *
- * @return Returns a pointer to a new buffer containing the value on success, otherwise NULL.
- *         This memory buffer must be free'd after usage.
- */
-char * sqldataValueHash(LogContext *log, xmlNode *sql_n) {
-	const char *hash = NULL, *isnull = NULL;
-	SHA1Context shactx;
-	uint8_t shahash[SHA1_HASH_SIZE];
-	char *ret = NULL, *ptr = NULL;
-	int i;
-
-	if( !(sql_n && (xmlStrcmp(sql_n->name, (xmlChar *) "value") == 0)
-              && (xmlStrcmp(sql_n->parent->name, (xmlChar *) "record") == 0)
-              || (xmlStrcmp(sql_n->parent->name, (xmlChar *) "value") == 0)) ) {
-                return NULL;
-	}
-
-	isnull = xmlGetAttrValue(sql_n->properties, "isnull");
-	if( isnull && (strcmp(isnull, "1") == 0) ) {
-		return NULL;
-	}
-
-	hash = xmlGetAttrValue(sql_n->properties, "hash");
-	if( !hash ) {
-		// If no hash attribute is found, just use the raw data
-		ret = strdup_nullsafe(xmlExtractContent(sql_n));
-	} else if( strcasecmp(hash, "sha1") == 0 ) {
-		const char *indata = xmlExtractContent(sql_n);
-		// SHA1 hashing requested
-		SHA1Init(&shactx);
-		SHA1Update(&shactx, indata, strlen_nullsafe(indata));
-		SHA1Final(&shactx, shahash);
-
-		// "Convert" to a readable format
-		ret = malloc_nullsafe(log, (SHA1_HASH_SIZE * 2) + 3);
-		ptr = ret;
-		for( i = 0; i < SHA1_HASH_SIZE; i++ ) {
-			sprintf(ptr, "%02x", shahash[i]);
-			ptr += 2;
-		}
-	} else {
-		ret = strdup("<Unsupported hashing algorithm>");
-	}
-
-	return ret;
-}
-
-
-/**
- * Extract the content of a //sqldata/records/record/value[@type='array']/value node set
- * and format it in suitable array format for the database backend.
- *
- * @param log    Log context
- * @param sql_n sqldata values node containing the value to extract and format as an array.
- *
- * @return Returns a pointer to a new memory buffer containing the value as a string.
- *         On errors, NULL is returned.  This memory buffer must be free'd after usage.
- */
-static char * sqldataValueArray(LogContext *log, xmlNode *sql_n)
-{
-	if( xmlparser_dbhelpers == NULL ) {
-		writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
-		return NULL;
-	}
-
-	return xmlparser_dbhelpers->dbh_FormatArray(log, sql_n);
-}
-
-
-/**
- * Extract the content of a '//sqldata/records/record/value' node.  It will consider
- * both the 'hash' and 'type' attributes of the 'value' tag.
- *
- * @param log    Log context
- * @param sql_n  Pointer to a value node of a sqldata XML document.
- *
- * @return Returns a pointer to a new memory buffer containing the value as a string.
- *         On errors, NULL is returned.  This memory buffer must be free'd after usage.
- */
-char *sqldataExtractContent(LogContext *log, xmlNode *sql_n) {
-	const char *valtype = xmlGetAttrValue(sql_n->properties, "type");
-
-        if( xmlparser_dbhelpers == NULL ) {
-                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
-                return NULL;
-        }
-
-	if( !sql_n || (xmlStrcmp(sql_n->name, (xmlChar *) "value") != 0)
-	    || (xmlStrcmp(sql_n->parent->name, (xmlChar *) "record") != 0) ) {
-		    return NULL;
-	}
-
-	if( valtype && (strcmp(valtype, "xmlblob") == 0) ) {
-		xmlNode *chld_n = sql_n->children;
-
-		// Go to next "real" tag, skipping non-element nodes
-		while( chld_n && chld_n->type != XML_ELEMENT_NODE ){
-			chld_n = chld_n->next;
-		}
-		return xmlNodeToString(log, chld_n);
-        } else if( valtype && (strcmp(valtype, "array") == 0) ) {
-                return sqldataValueArray(log, sql_n);
-	} else {
-		return sqldataValueHash(log, sql_n);
-	}
-}
-
-
-/**
- * Return the 'fid' value of a given field in an sqldata XML document.
- *
- * @param log    Log context
- * @param sql_n  Pointer to the root xmlNode element of a sqldata XML document
- * @param fname  String containing the field name to look up
- *
- * @return Returns a value >= 0 on success, containing the 'fid' value of the field.  Otherwise
- *         a value < 0 is returned.  -1 if the field is not found or -2 if there are some problems
- *         with the XML document.
- */
-int sqldataGetFid(LogContext *log, xmlNode *sql_n, const char *fname) {
-	xmlNode *f_n = NULL;
-
-        if( xmlparser_dbhelpers == NULL ) {
-                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
-                return -2;
-        }
-
-	if( !sql_n || (xmlStrcmp(sql_n->name, (xmlChar *) "sqldata") != 0) ) {
-		writelog(log, LOG_ERR,
-			 "sqldataGetFid: Input XML document is not a valid sqldata document");
-		return -2;
-	}
-
-	f_n = xmlFindNode(sql_n, "fields");
-	if( !f_n || !f_n->children ) {
-		writelog(log, LOG_ERR,
-			 "sqldataGetFid: Input XML document does not contain a fields section");
-		return -2;
-	}
-
-	foreach_xmlnode(f_n->children, f_n) {
-		if( (f_n->type != XML_ELEMENT_NODE)
-		    || xmlStrcmp(f_n->name, (xmlChar *) "field") != 0 ) {
-			// Skip uninteresting nodes
-			continue;
-		}
-
-		if( strcmp(xmlExtractContent(f_n), fname) == 0 ) {
-			char *fid = xmlGetAttrValue(f_n->properties, "fid");
-			if( !fid ) {
-				writelog(log, LOG_ERR,
-					 "sqldataGetFid: Field node is missing 'fid' attribute (field: %s)",
-					 fname);
-				return -2;
-			}
-			return atoi_nullsafe(fid);
-		}
-	}
-	return -1;
-}
-
-
-/**
- * Retrieves the value of a particular field in an sqldata XML document.
- *
- * @param log    Log context
- * @param sqld   pointer to an sqldata XML document.
- * @param fname  String containing the field name to extract the value of.
- * @param recid  Integer containing the record ID of the record to extract the value.  This starts
- *               on 0.
- *
- * @return Returns a pointer to a new memory buffer containing the extracted value.  On errors or if
- *         recid is higher than available records, NULL is returned.
- */
-char *sqldataGetValue(LogContext *log, xmlDoc *sqld, const char *fname, int recid ) {
-	xmlNode *r_n = NULL;
-	int fid = -3, rc = 0;
-
-        if( xmlparser_dbhelpers == NULL ) {
-                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
-                return NULL;
-        }
-
-	if( recid < 0 ) {
-		writelog(log, LOG_ERR, "sqldataGetValue: Invalid recid");
-		return NULL;
-	}
-
-	r_n = xmlDocGetRootElement(sqld);
-	if( !r_n || (xmlStrcmp(r_n->name, (xmlChar *) "sqldata") != 0) ) {
-		writelog(log, LOG_ERR,
-			 "sqldataGetValue: Input XML document is not a valid sqldata document");
-		return NULL;
-	}
-
-	fid = sqldataGetFid(log, r_n, fname);
-	if( fid < 0 ) {
-		return NULL;
-	}
-
-	r_n = xmlFindNode(r_n, "records");
-	if( !r_n || !r_n->children ) {
-		writelog(log, LOG_ERR,
-			 "sqldataGetValue: Input XML document does not contain a records section");
-		return NULL;
-	}
-
-	foreach_xmlnode(r_n->children, r_n) {
-		if( (r_n->type != XML_ELEMENT_NODE)
-		    || xmlStrcmp(r_n->name, (xmlChar *) "record") != 0 ) {
-			// Skip uninteresting nodes
-			continue;
-		}
-		if( rc == recid ) {
-			xmlNode *v_n = NULL;
-			// The rigth record is found, find the field we're looking for
-			foreach_xmlnode(r_n->children, v_n) {
-				char *fid_s = NULL;
-				if( (v_n->type != XML_ELEMENT_NODE)
-				    || (xmlStrcmp(v_n->name, (xmlChar *) "value") != 0) ) {
-					// Skip uninteresting nodes
-					continue;
-				}
-				fid_s = xmlGetAttrValue(v_n->properties, "fid");
-				if( fid_s && (fid == atoi_nullsafe(fid_s)) ) {
-					return sqldataExtractContent(log, v_n);
-				}
-			}
-		}
-		rc++;
-	}
-	return NULL;
-}
-
-
-/**
- * Helper function to parse an sqldata XML document for the systems_hostname table.  In addition
- * it will also return two strings containing hostname and ipaddress of the host.
- *
- * @param log        Log context
- * @param xslt       Pointer to an xmlparser.xml XSLT template
- * @param summaryxml rteval XML report document
- * @param syskey     Integer containing the syskey value corresponding to this host
- * @param hostname   Return pointer for where the hostname will be saved.
- * @param ipaddr     Return pointer for where the IP address will be saved.
- *
- * @return Returns a sqldata XML document on success.  In this case the hostname and ipaddr will point
- *         at memory buffers containing hostname and ipaddress.  These values must be free'd after usage.
- *         On errors the function will return NULL and hostname and ipaddr will not have been touched
- *         at all.
- */
-xmlDoc *sqldataGetHostInfo(LogContext *log, xsltStylesheet *xslt, xmlDoc *summaryxml,
-			   int syskey, char **hostname, char **ipaddr)
-{
-	xmlDoc *hostinfo_d = NULL;
-	parseParams prms;
-
-        if( xmlparser_dbhelpers == NULL ) {
-                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
-                return NULL;
-        }
-
-	memset(&prms, 0, sizeof(parseParams));
-	prms.table = "systems_hostname";
-	prms.syskey = syskey;
-
-	hostinfo_d = parseToSQLdata(log, xslt, summaryxml, &prms);
-	if( !hostinfo_d ) {
-		writelog(log, LOG_ERR,
-			 "sqldatGetHostInfo: Could not parse input XML data");
-		xmlFreeDoc(hostinfo_d);
-		goto exit;
-	}
-
-	// Grab hostname from input XML
-	*hostname = sqldataGetValue(log, hostinfo_d, "hostname", 0);
-	if( !hostname ) {
-		writelog(log, LOG_ERR,
-			"sqldatGetHostInfo: Could not retrieve the hostname field from the input XML");
-		xmlFreeDoc(hostinfo_d);
-		goto exit;
-	}
-
-	// Grab ipaddr from input XML
-	*ipaddr = sqldataGetValue(log, hostinfo_d, "ipaddr", 0);
-	if( !ipaddr ) {
-		writelog(log, LOG_ERR,
-			"sqldatGetHostInfo: Could not retrieve the IP address field from the input XML");
-		free_nullsafe(hostname);
-		xmlFreeDoc(hostinfo_d);
-		goto exit;
-	}
- exit:
-	return hostinfo_d;
-}
-
-int sqldataGetRequiredSchemaVer(LogContext *log, xmlNode *sqldata_root)
-{
-	char *schver = NULL, *cp = NULL, *ptr = NULL;
-	int majv = 0, minv = 0;
-
-        if( xmlparser_dbhelpers == NULL ) {
-                writelog(log, LOG_ERR, "Programming error: xmlparser is not initialised");
-                return -1;
-        }
-
-	if( !sqldata_root || (xmlStrcmp(sqldata_root->name, (xmlChar *) "sqldata") != 0) ) {
-		writelog(log, LOG_ERR, "sqldataGetRequiredSchemaVer: Invalid document node");
-		return -1;
-	}
-
-	schver = xmlGetAttrValue(sqldata_root->properties, "schemaver");
-	if( schver == NULL ) {
-		return 100;  // If not defined, presume lowest available version.
-	}
-	cp = strdup(schver);
-	assert( cp != NULL );
-
-	if( (ptr = strpbrk(cp, ".")) != NULL ) {
-		*ptr = 0;
-		ptr++;
-		majv = atoi_nullsafe(cp);
-		minv = atoi_nullsafe(ptr);
-	} else {
-		majv = atoi_nullsafe(cp);
-		minv = 0;
-	}
-	free_nullsafe(cp);
-
-	return (majv * 100) + minv;
-}
diff --git a/server/parser/xmlparser.h b/server/parser/xmlparser.h
deleted file mode 100644
index 1aa3977..0000000
--- a/server/parser/xmlparser.h
+++ /dev/null
@@ -1,75 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2009 Red Hat Inc.
- *
- * David Sommerseth <davids@redhat.com>
- *
- *
- */
-
-/**
- * @file   xmlparser.h
- * @author David Sommerseth <davids@redhat.com>
- * @date   Wed Oct 7 17:27:39 2009
- *
- * @brief Parses summary.xml reports from rteval into a standardised XML format
- *        which is useful when putting data into a database.
- *
- */
-
-
-#ifndef _XMLPARSER_H
-#define _XMLPARSER_H
-
-/**
- *  Parameters needed by the the xmlparser.xsl XSLT template.
- */
-typedef struct {
-        const char *table;            /**< Which table to parse data for.  Required*/
-        unsigned int submid;          /**< Submission ID, needed by the 'rtevalruns' table */
-        unsigned int syskey;          /**< System key (referencing systems.syskey) */
-        const char *report_filename;  /**< Filename to the saved report (after being parsed) */
-        unsigned int rterid;          /**< References rtevalruns.rterid */
-} parseParams;
-
-/**
- * Container for string arrays
- */
-typedef struct {
-        unsigned int size;
-        char **data;
-} array_str_t;
-
-array_str_t * strSplit(const char * str, const char * sep);
-inline char * strGet(array_str_t * ar, unsigned int el);
-inline unsigned int strSize(array_str_t * ar);
-void strFree(array_str_t * ar);
-
-/** Simple for-loop iterator for array_str_t objects
- *
- * @param ptr Return pointer (char *) where the element data is returned
- * @param idx Element index counter, declares where it should start and can be used
- *            to track the iteration process.  Must be an int variable
- * @param ar  The array_str_t object to iterate
- */
-#define for_array_str(ptr, idx, ar) for( ptr = ar->data[idx]; idx++ < ar->size; \
-                                         ptr=(idx < ar->size ? ar->data[idx] : NULL) )
-
-/**
- *  Database specific helper functions
- */
-typedef struct {
-        char *(*dbh_FormatArray)(LogContext *log, xmlNode *sql_n); /** Formats data as arrays */
-} dbhelper_func;
-
-void init_xmlparser(dbhelper_func const * dbhelpers);
-char * sqldataValueHash(LogContext *log, xmlNode *sql_n);
-xmlDoc *parseToSQLdata(LogContext *log, xsltStylesheet *xslt, xmlDoc *indata_d, parseParams *params);
-char *sqldataExtractContent(LogContext *log, xmlNode *sql_n);
-int sqldataGetFid(LogContext *log, xmlNode *sqld, const char *fname);
-char *sqldataGetValue(LogContext *log, xmlDoc *sqld, const char *fname, int recid);
-xmlDoc *sqldataGetHostInfo(LogContext *log, xsltStylesheet *xslt, xmlDoc *summaryxml,
-			   int syskey, char **hostname, char **ipaddr);
-int sqldataGetRequiredSchemaVer(LogContext *log, xmlNode *sqldata_root);
-
-#endif
diff --git a/server/parser/xmlparser.xsl b/server/parser/xmlparser.xsl
deleted file mode 100644
index ddef1cc..0000000
--- a/server/parser/xmlparser.xsl
+++ /dev/null
@@ -1,607 +0,0 @@ 
-<?xml version="1.0"?>
-<!-- SPDX-License-Identifier: GPL-2.0-only -->
-<!--
-     *
-     *  GPLv2 - Copyright (C) 2009
-     *          David Sommerseth <davids@redhat.com>
-     *
--->
-
-<xsl:stylesheet  version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
-                 xmlns:math="http://exslt.org/math"
-                 extension-element-prefixes="math">
-  <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
-
-  <!-- Used for iterating CPU topology information -->
-  <xsl:key name="pkgkey" match="cpu" use="@physical_package_id"/>
-
-
-  <!-- Supported tables in reports in rteval v1.37 and older -->
-  <xsl:template match="/rteval['2.0' > @version]">
-    <xsl:choose>
-      <!-- TABLE: systems -->
-      <xsl:when test="$table = 'systems'">
-        <xsl:apply-templates select="HardwareInfo" mode="tbl_systems"/>
-      </xsl:when>
-
-      <!-- TABLE: systems_hostname -->
-      <xsl:when test="$table = 'systems_hostname'">
-        <xsl:apply-templates select="." mode="tbl_systems_hostname"/>
-      </xsl:when>
-
-      <!-- TABLE: rtevalruns -->
-      <xsl:when test="$table = 'rtevalruns'">
-        <xsl:apply-templates select="." mode="tbl_rtevalruns"/>
-      </xsl:when>
-
-      <!-- TABLE: rtevalruns_details -->
-      <xsl:when test="$table = 'rtevalruns_details'">
-        <xsl:apply-templates select="." mode="tbl_rtevalruns_details"/>
-      </xsl:when>
-
-      <!-- TABLE: cyclic_statistics -->
-      <xsl:when test="$table = 'cyclic_statistics'">
-        <xsl:apply-templates select="cyclictest" mode="tbl_cyclictest_statistics"/>
-      </xsl:when>
-
-      <!-- TABLE: cyclic_histogram -->
-      <xsl:when test="$table = 'cyclic_histogram'">
-        <xsl:apply-templates select="cyclictest" mode="tbl_cyclictest_histogram"/>
-      </xsl:when>
-
-      <!-- TABLE: cyclic_rawdata - only used by rteval v1.4 and earlier -->
-      <xsl:when test="$table = 'cyclic_rawdata'">
-        <xsl:if test="string(number($rterid)) = 'NaN'">
-          <xsl:message terminate="yes">
-            <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-          </xsl:message>
-        </xsl:if>
-	<sqldata schemaver="1.0" table="cyclic_rawdata">
-	  <fields>
-            <field fid="0">rterid</field>
-            <field fid="1">cpu_num</field>
-            <field fid="2">sampleseq</field>
-            <field fid="3">latency</field>
-	  </fields>
-	  <records>
-            <xsl:for-each select="cyclictest/RawSampleData/Thread/Sample">
-              <record>
-		<value fid="0"><xsl:value-of select="$rterid"/></value>
-		<value fid="1"><xsl:value-of select="../@id"/></value>
-		<value fid="2"><xsl:value-of select="@seq"/></value>
-		<value fid="3"><xsl:value-of select="@latency"/></value>
-              </record>
-            </xsl:for-each>
-	  </records>
-	</sqldata>
-      </xsl:when>
-
-      <!-- Tables only used by rteval v2.0 and newer - just ignore them to avoid parsing warnings -->
-      <xsl:when test="$table = 'hwlatdetect_summary'">
-      </xsl:when>
-      <xsl:when test="$table = 'hwlatdetect_samples'">
-      </xsl:when>
-
-      <xsl:otherwise>
-        <xsl:message terminate="yes">
-          <xsl:text>Invalid 'table' parameter value: </xsl:text><xsl:value-of select="$table"/>
-        </xsl:message>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-
-  <!-- Supported tables in reports from rteval v2.0 and newer -->
-  <xsl:template match="/rteval[@version >= '2.0']">
-    <xsl:choose>
-      <!-- TABLE: systems -->
-      <xsl:when test="$table = 'systems'">
-        <xsl:apply-templates select="SystemInfo/DMIinfo/HardwareInfo" mode="tbl_systems"/>
-      </xsl:when>
-
-      <!-- TABLE: systems_hostname -->
-      <xsl:when test="$table = 'systems_hostname'">
-        <xsl:apply-templates select="SystemInfo" mode="tbl_systems_hostname"/>
-      </xsl:when>
-
-      <!-- TABLE: rtevalruns -->
-      <xsl:when test="$table = 'rtevalruns'">
-        <xsl:apply-templates select="." mode="tbl_rtevalruns"/>
-      </xsl:when>
-
-      <!-- TABLE: rtevalruns_details -->
-      <xsl:when test="$table = 'rtevalruns_details'">
-        <xsl:apply-templates select="SystemInfo" mode="tbl_rtevalruns_details"/>
-      </xsl:when>
-
-      <!-- TABLE: cyclic_statistics -->
-      <xsl:when test="$table = 'cyclic_statistics'">
-        <xsl:apply-templates select="Measurements/Profile/cyclictest" mode="tbl_cyclictest_statistics"/>
-      </xsl:when>
-
-      <!-- TABLE: cyclic_histogram -->
-      <xsl:when test="$table = 'cyclic_histogram'">
-        <xsl:apply-templates select="Measurements/Profile/cyclictest" mode="tbl_cyclictest_histogram"/>
-      </xsl:when>
-
-      <!-- TABLE: hwlatdetect_summary -->
-      <xsl:when test="$table = 'hwlatdetect_summary'">
-        <xsl:apply-templates select="Measurements/Profile/hwlatdetect" mode="tbl_hwlatdetect_summary"/>
-      </xsl:when>
-
-      <!-- TABLE: hwlatdetect_samples -->
-      <xsl:when test="$table = 'hwlatdetect_samples'">
-        <xsl:apply-templates select="Measurements/Profile/hwlatdetect/samples" mode="tbl_hwlatdetect_samples"/>
-      </xsl:when>
-
-      <!-- TABLE: cyclic_rawdata - only used by rteval v1.4 and earlier -->
-      <xsl:when test="$table = 'cyclic_rawdata'"> <!-- Just ignore this one - avoids parsing warnings -->
-      </xsl:when>
-
-      <xsl:otherwise>
-        <xsl:message terminate="yes">
-          <xsl:text>Invalid 'table' parameter value: </xsl:text><xsl:value-of select="$table"/>
-        </xsl:message>
-      </xsl:otherwise>
-    </xsl:choose>
-  </xsl:template>
-
-
-
-
-
-  <!-- TABLE: systems - all rteval versions -->
-  <xsl:template match="/rteval['2.0' > @version]/HardwareInfo|/rteval[@version >= '2.0']/SystemInfo/DMIinfo/HardwareInfo" mode="tbl_systems">
-    <sqldata schemaver="1.0" table="systems" key="syskey">
-      <fields>
-        <field fid="0">sysid</field>
-        <field fid="1">dmidata</field>
-      </fields>
-      <records>
-        <record>
-          <value fid="0" hash="sha1">
-            <xsl:value-of select="concat(@SystemUUID,':',@SerialNo)"/>
-          </value>
-          <value fid="1" type="xmlblob">
-            <xsl:copy-of select="."/>
-          </value>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-
-
-  <!-- TABLE: systems_hostname - rteval v1.37 or older -->
-  <xsl:template match="/rteval['2.0' > @version]" mode="tbl_systems_hostname">
-    <xsl:if test="string(number($syskey)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'syskey' parameter value: </xsl:text><xsl:value-of select="syskey"/>
-      </xsl:message>
-    </xsl:if>
-    <sqldata schemaver="1.0" table="systems_hostname">
-      <xsl:call-template name="fields_systems_hostname"/>
-      <records>
-        <record>
-          <value fid="0"><xsl:value-of select="$syskey"/></value>
-          <value fid="1"><xsl:value-of select="uname/node"/></value>
-          <value fid="2"><xsl:value-of select="network_config/interface/IPv4[@defaultgw=1]/@ipaddr"/></value>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <!-- TABLE: systems_hostname - rteval v2.0 or newer -->
-  <xsl:template match="/rteval[@version >= '2.0']/SystemInfo" mode="tbl_systems_hostname">
-    <xsl:if test="string(number($syskey)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'syskey' parameter value: </xsl:text><xsl:value-of select="syskey"/>
-      </xsl:message>
-    </xsl:if>
-    <sqldata schemaver="1.0" table="systems_hostname">
-      <xsl:call-template name="fields_systems_hostname"/>
-      <records>
-        <record>
-          <value fid="0"><xsl:value-of select="$syskey"/></value>
-          <value fid="1"><xsl:value-of select="uname/node"/></value>
-          <value fid="2"><xsl:value-of select="NetworkConfig/interface/IPv4[@defaultgw=1]/@ipaddr"/></value>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <xsl:template name="fields_systems_hostname">
-    <fields>
-      <field fid="0">syskey</field>
-      <field fid="1">hostname</field>
-      <field fid="2">ipaddr</field>
-    </fields>
-  </xsl:template>
-
-
-
-  <!-- TABLE: rtevalruns - rteval v1.37 or older -->
-  <xsl:template match="/rteval['2.0' > @version]" mode="tbl_rtevalruns">
-    <sqldata schemaver="1.2" table="rtevalruns">
-      <xsl:call-template name="fields_rtevalruns"/>
-      <records>
-        <record>
-          <value fid="0"><xsl:value-of select="$syskey"/></value>
-          <value fid="1"><xsl:value-of select="uname/kernel"/></value>
-          <value fid="2"><xsl:choose>
-            <xsl:when test="uname/kernel/@is_RT = '1'">true</xsl:when>
-            <xsl:otherwise>false</xsl:otherwise></xsl:choose>
-          </value>
-          <value fid="3"><xsl:value-of select="uname/arch"/></value>
-          <value fid="4"><xsl:value-of select="concat(run_info/date, ' ', run_info/time)"/></value>
-          <value fid="5">
-            <xsl:value-of select="(run_info/@days*86400)+(run_info/@hours*3600)
-                                  +(run_info/@minutes*60)+(run_info/@seconds)"/>
-          </value>
-          <value fid="6"><xsl:value-of select="loads/@load_average"/></value>
-          <value fid="7"><xsl:value-of select="@version"/></value>
-          <value fid="8"><xsl:value-of select="$report_filename"/></value>
-          <value fid="9"><xsl:value-of select="$rterid"/></value>
-          <value fid="10"><xsl:value-of select="$submid"/></value>
-          <value fid="11"><xsl:value-of select="uname/baseos"/></value>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <!-- TABLE: rtevalruns - rteval v2.0 or newer -->
-  <xsl:template match="/rteval[@version >= '2.0']" mode="tbl_rtevalruns">
-    <sqldata schemaver="1.2" table="rtevalruns">
-      <xsl:call-template name="fields_rtevalruns"/>
-      <records>
-        <record>
-          <value fid="0"><xsl:value-of select="$syskey"/></value>
-          <value fid="1"><xsl:value-of select="SystemInfo/uname/kernel"/></value>
-          <value fid="2"><xsl:choose>
-            <xsl:when test="SystemInfo/uname/kernel/@is_RT = '1'">true</xsl:when>
-            <xsl:otherwise>false</xsl:otherwise></xsl:choose>
-          </value>
-          <value fid="3"><xsl:value-of select="SystemInfo/uname/arch"/></value>
-          <value fid="4"><xsl:value-of select="concat(run_info/date, ' ', run_info/time)"/></value>
-          <value fid="5">
-            <xsl:value-of select="(run_info/@days*86400)+(run_info/@hours*3600)
-                                  +(run_info/@minutes*60)+(run_info/@seconds)"/>
-          </value>
-          <value fid="6"><xsl:value-of select="loads/@load_average"/></value>
-          <value fid="7"><xsl:value-of select="@version"/></value>
-          <value fid="8"><xsl:value-of select="$report_filename"/></value>
-          <value fid="9"><xsl:value-of select="$rterid"/></value>
-          <value fid="10"><xsl:value-of select="$submid"/></value>
-          <value fid="11"><xsl:value-of select="SystemInfo/uname/baseos"/></value>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <xsl:template name="fields_rtevalruns">
-    <xsl:if test="string(number($syskey)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'syskey' parameter value: </xsl:text><xsl:value-of select="syskey"/>
-      </xsl:message>
-    </xsl:if>
-    <xsl:if test="string(number($rterid)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-      </xsl:message>
-    </xsl:if>
-    <xsl:if test="string(number($submid)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'submid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-      </xsl:message>
-    </xsl:if>
-    <xsl:if test="$report_filename = ''">
-      <xsl:message terminate="yes">
-        <xsl:text>The parameter 'report_filename' parameter cannot be empty</xsl:text>
-      </xsl:message>
-    </xsl:if>
-      <fields>
-        <field fid="0">syskey</field>
-        <field fid="1">kernel_ver</field>
-        <field fid="2">kernel_rt</field>
-        <field fid="3">arch</field>
-        <field fid="4">run_start</field>
-        <field fid="5">run_duration</field>
-        <field fid="6">load_avg</field>
-        <field fid="7">version</field>
-        <field fid="8">report_filename</field>
-        <field fid="9">rterid</field>
-        <field fid="10">submid</field>
-        <field fid="11">distro</field>
-      </fields>
-  </xsl:template>
-
-
-
-  <!-- TABLE: rtevalruns_details - rteval v1.37 or older -->
-  <xsl:template match="/rteval['2.0' > @version]" mode="tbl_rtevalruns_details">
-    <sqldata schemaver="1.4" table="rtevalruns_details">
-      <xsl:call-template name="fields_rtevalruns_details"/>
-      <records>
-        <record>
-          <value fid="0"><xsl:value-of select="$rterid"/></value>
-          <value fid="1"><xsl:value-of select="hardware/numa_nodes"/></value>
-          <value fid="2">
-            <xsl:choose>
-              <xsl:when test="hardware/cpu_topology">
-                <xsl:value-of select="hardware/cpu_topology/@num_cpu_cores"/>
-              </xsl:when>
-              <xsl:otherwise>
-                <xsl:value-of select="hardware/cpu_cores"/>
-              </xsl:otherwise>
-            </xsl:choose>
-          </value>
-          <value fid="3">
-            <xsl:value-of select="hardware/cpu_topology/@num_cpu_sockets"/>
-          </value>
-          <value fid="4" type="xmlblob">
-            <rteval_details>
-              <xsl:copy-of select="clocksource|services|kthreads|network_config|loads|cyclictest/command_line"/>
-              <hardware>
-                <xsl:copy-of select="hardware/memory_size|hardware/cpu_topology"/>
-              </hardware>
-            </rteval_details>
-          </value>
-          <value fid="5"><xsl:value-of select="run_info/annotate"/></value>
-          <value fid="6" type="array">
-            <xsl:for-each select="hardware/cpu_topology/cpu[generate-id() = generate-id(key('pkgkey', @physical_package_id)[1])]">
-              <xsl:call-template name="count_core_spread_v1x">
-                <xsl:with-param name="pkgid" select="@physical_package_id"/>
-              </xsl:call-template>
-            </xsl:for-each>
-          </value>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <!-- TABLE: rtevalruns_details - rteval v2.0 or newer -->
-  <xsl:template match="/rteval[@version >= '2.0']/SystemInfo" mode="tbl_rtevalruns_details">
-    <sqldata schemaver="1.4" table="rtevalruns_details">
-      <xsl:call-template name="fields_rtevalruns_details"/>
-      <records>
-        <record>
-          <value fid="0"><xsl:value-of select="$rterid"/></value>
-          <value fid="1"><xsl:value-of select="Memory/numa_nodes"/></value>
-          <value fid="2">
-            <xsl:value-of select="CPUtopology/@num_cpu_cores"/>
-          </value>
-          <value fid="3">
-            <xsl:value-of select="CPUtopology/@num_cpu_sockets"/>
-          </value>
-          <value fid="4" type="xmlblob">
-            <rteval_details format="2">
-              <xsl:copy-of select="Kernel/ClockSource|Services|Kernel/kthreads|NetworkConfig"/>
-              <xsl:copy-of select="../loads"/>
-              <Measurement>
-                <xsl:for-each select="../Measurements/Profile/*">
-                  <module>
-                    <xsl:attribute name="name"><xsl:value-of select="name(.)"/></xsl:attribute>
-                    <xsl:if test="@command_line">
-                      <command_line><xsl:value-of select="@command_line"/></command_line>
-                    </xsl:if>
-                    <xsl:copy-of select="timestamps"/>
-                  </module>
-                </xsl:for-each>
-              </Measurement>
-              <hardware>
-                <xsl:copy-of select="Memory|CPUtopology"/>
-              </hardware>
-            </rteval_details>
-          </value>
-          <value fid="5"><xsl:value-of select="../run_info/annotate"/></value>
-          <value fid="6" type="array">
-            <xsl:for-each select="CPUtopology/cpu[generate-id() = generate-id(key('pkgkey', @physical_package_id)[1])]">
-              <xsl:call-template name="count_core_spread_v2x">
-                <xsl:with-param name="pkgid" select="@physical_package_id"/>
-              </xsl:call-template>
-            </xsl:for-each>
-          </value>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <xsl:template name="fields_rtevalruns_details">
-    <xsl:if test="string(number($rterid)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-      </xsl:message>
-    </xsl:if>
-    <fields>
-      <field fid="0">rterid</field>
-      <field fid="1">numa_nodes</field>
-      <field fid="2">num_cpu_cores</field>
-      <field fid="3">num_cpu_sockets</field>
-      <field fid="4">xmldata</field>
-      <field fid="5">annotation</field>
-      <field fid="6">cpu_core_spread</field>
-    </fields>
-  </xsl:template>
-
-
-
-  <!-- TABLE: cyclic_statistics - rteval - all version -->
-  <xsl:template match="/rteval['2.0' > @version]/cyclictest|/rteval[@version >= '2.0']/Measurements/Profile/cyclictest"
-                mode="tbl_cyclictest_statistics">
-    <xsl:if test="string(number($rterid)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-      </xsl:message>
-    </xsl:if>
-    <sqldata schemaver="1.1" table="cyclic_statistics">
-      <fields>
-        <field fid="0">rterid</field>
-        <field fid="1">coreid</field>
-        <field fid="2">priority</field>
-        <field fid="3">num_samples</field>
-        <field fid="4">lat_min</field>
-        <field fid="5">lat_max</field>
-        <field fid="6">lat_mean</field>
-        <field fid="7">mode</field>
-        <field fid="8">range</field>
-        <field fid="9">median</field>
-        <field fid="10">stddev</field>
-        <field fid="11">mean_abs_dev</field>
-      </fields>
-      <records>
-        <xsl:for-each select="core/statistics[samples > 0]|system/statistics[samples > 0]">
-          <record>
-            <value fid="0"><xsl:value-of select="$rterid"/></value>
-            <value fid="1"><xsl:choose>
-              <xsl:when test="../@id"><xsl:value-of select="../@id"/></xsl:when>
-              <xsl:otherwise><xsl:attribute name="isnull">1</xsl:attribute></xsl:otherwise></xsl:choose>
-            </value>
-            <value fid="2"><xsl:choose>
-              <xsl:when test="../@priority"><xsl:value-of select="../@priority"/></xsl:when>
-              <xsl:otherwise><xsl:attribute name="isnull">1</xsl:attribute></xsl:otherwise></xsl:choose>
-            </value>
-            <value fid="3"><xsl:value-of select="samples"/></value>
-            <value fid="4"><xsl:value-of select="minimum"/></value>
-            <value fid="5"><xsl:value-of select="maximum"/></value>
-            <value fid="6"><xsl:value-of select="mean"/></value>
-            <value fid="7"><xsl:value-of select="mode"/></value>
-            <value fid="8"><xsl:value-of select="range"/></value>
-            <value fid="9"><xsl:value-of select="median"/></value>
-            <value fid="10"><xsl:value-of select="standard_deviation"/></value>
-            <value fid="11"><xsl:value-of select="mean_absolute_deviation"/></value>
-          </record>
-        </xsl:for-each>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-
-
-  <!-- TABLE: cyclic_histogram - rteval - all version -->
-  <xsl:template match="/rteval['2.0' > @version]/cyclictest|/rteval[@version >= '2.0']/Measurements/Profile/cyclictest"
-                mode="tbl_cyclictest_histogram">
-    <xsl:if test="string(number($rterid)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-      </xsl:message>
-    </xsl:if>
-    <sqldata schemaver="1.0" table="cyclic_histogram">
-      <fields>
-        <field fid="0">rterid</field>
-        <field fid="1">core</field>
-        <field fid="2">index</field>
-        <field fid="3">value</field>
-      </fields>
-      <records>
-        <!-- Do it in this order, so the overall system results are parsed first -->
-        <xsl:apply-templates select="./system/histogram/bucket" mode="cyclic_histogram_rec_sql"/>
-        <xsl:apply-templates select="./core/histogram/bucket" mode="cyclic_histogram_rec_sql"/>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <xsl:template match="/rteval['2.0' > @version]/cyclictest/*/histogram/bucket|/rteval[@version >= '2.0']/Measurements/Profile/cyclictest/*/histogram/bucket"
-		mode="cyclic_histogram_rec_sql">
-      <record>
-	<value fid="0"><xsl:value-of select="$rterid"/></value>
-	<value fid="1"><xsl:value-of select="../../@id"/></value>
-	<value fid="2"><xsl:value-of select="@index"/></value>
-	<value fid="3"><xsl:value-of select="@value"/></value>
-      </record>
-  </xsl:template>
-
-
-
-  <!-- TABLE: hwlatdetect_summar - only for rteval 2.0 and newer -->
-  <xsl:template match="/rteval[@version >= '2.0']/Measurements/Profile/hwlatdetect" mode="tbl_hwlatdetect_summary">
-    <xsl:if test="string(number($rterid)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-      </xsl:message>
-    </xsl:if>
-    <sqldata schemaver="1.5" table="hwlatdetect_summary">
-      <fields>
-        <field fid="0">rterid</field>
-        <field fid="1">duration</field>
-        <field fid="2">threshold</field>
-        <field fid="3">timewindow</field>
-        <field fid="4">width</field>
-        <field fid="5">samplecount</field>
-        <field fid="6">hwlat_min</field>
-        <field fid="7">hwlat_avg</field>
-        <field fid="8">hwlat_max</field>
-      </fields>
-      <records>
-        <record>
-          <value fid="0"><xsl:value-of select="$rterid"/></value>
-          <value fid="1"><xsl:value-of select="RunParams/@duration"/></value>
-          <value fid="2"><xsl:value-of select="RunParams/@threshold"/></value>
-          <value fid="3"><xsl:value-of select="RunParams/@window"/></value>
-          <value fid="4"><xsl:value-of select="RunParams/@width"/></value>
-          <value fid="5"><xsl:value-of select="samples/@count"/></value>
-          <xsl:choose>
-            <xsl:when test="samples/@count > 0">
-              <value fid="6"><xsl:value-of select="math:min(samples/sample/@duration)"/></value>
-              <value fid="7"><xsl:value-of select="sum(samples/sample/@duration) div samples/@count"/></value>
-              <value fid="8"><xsl:value-of select="math:max(samples/sample/@duration)"/></value>
-            </xsl:when>
-            <xsl:otherwise>
-              <value fid="6">0</value>
-              <value fid="7">0</value>
-              <value fid="8">0</value>
-            </xsl:otherwise>
-          </xsl:choose>
-        </record>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-
-
-  <!-- TABLE: hwlatdetect_samples - only for rteval 2.0 and newer -->
-  <xsl:template match="/rteval[@version >='2.0']/Measurements/Profile/hwlatdetect/samples" mode="tbl_hwlatdetect_samples">
-    <xsl:if test="string(number($rterid)) = 'NaN'">
-      <xsl:message terminate="yes">
-        <xsl:text>Invalid 'rterid' parameter value: </xsl:text><xsl:value-of select="$rterid"/>
-      </xsl:message>
-    </xsl:if>
-    <sqldata schemaver="1.5" table="hwlatdetect_samples">
-      <fields>
-        <field fid="0">rterid</field>
-        <field fid="1">timestamp</field>
-        <field fid="2">latency</field>
-      </fields>
-      <records>
-        <xsl:apply-templates select="sample" mode="hwlatdetect_samples"/>
-      </records>
-    </sqldata>
-  </xsl:template>
-
-  <xsl:template match="/rteval[@version >='2.0']/Measurements/Profile/hwlatdetect[@format='1.0']/samples/sample" mode="hwlatdetect_samples">
-    <record>
-      <value fid="0"><xsl:value-of select="$rterid"/></value>
-      <value fid="1"><xsl:value-of select="@timestamp"/></value>
-      <value fid="2"><xsl:value-of select="@duration"/></value>
-    </record>
-  </xsl:template>
-
-
-
-
-  <!-- Helper "function" for generating a core per physical socket spread overview - for rteval v1.37 or older -->
-  <xsl:template name="count_core_spread_v1x">
-    <xsl:param name="pkgid"/>
-    <value>
-      <xsl:value-of select="count(/rteval/hardware/cpu_topology/cpu[@physical_package_id = $pkgid])"/>
-    </value>
-  </xsl:template>
-
-  <!-- Helper "function" for generating a core per physical socket spread overview - for rteval v2.0 or newer -->
-  <xsl:template name="count_core_spread_v2x">
-    <xsl:param name="pkgid"/>
-    <value>
-      <xsl:value-of select="count(/rteval/SystemInfo/CPUtopology/cpu[@physical_package_id = $pkgid])"/>
-    </value>
-  </xsl:template>
-
-</xsl:stylesheet>
diff --git a/server/remove_rtevalrun b/server/remove_rtevalrun
deleted file mode 100755
index 8772b33..0000000
--- a/server/remove_rtevalrun
+++ /dev/null
@@ -1,65 +0,0 @@ 
-#!/usr/bin/python3 -tt
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   remove_rtevalrun
-#   A script intended to be run on the database server, which
-#   removes a given rteval run, based on the 'rterid' value
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import sys
-import getpass
-from argparse import ArgumentParser
-from database import Database
-
-def do_delete(dbc, table, rterid):
-    print "Cleaning up %s ..." % table,
-    try:
-        res = dbc.DELETE(table, {"rterid": int(rterid)})
-        print "%i rows deleted" % res
-    except Exception, err:
-        print " ** FAILED **"
-        print err
-        dbc.ROLLBACK()
-        sys.exit(2)
-
-
-if __name__ == '__main__':
-    parser = ArgumentParser(version="%prog v0.1")
-
-    parser.add_argument("-H", "--host", action="store", dest="dbhost", default="localhost",
-                      help="Database server to connect to (default: %default)",
-                      metavar="HOST")
-    parser.add_argument("-p", "--port", action="store", dest="dbport", default="5432",
-                      help="Database server port to use (default: %default)", metavar="PORT")
-    parser.add_argument("-U", "--user", action="store", dest="dbuser", default="rtevaladmin",
-                      help="Database user to connect as (default: %default)", metavar="USERNAME")
-    parser.add_argument("-d", "--database", action="store", dest="dbname", default="rteval",
-                      help="Database to use (default: %default)", metavar="DATABASE")
-    parser.add_argument("-r", "--rterid", action="store", dest="rterid", default=None,
-                      help="rteval run id to remove from the database", metavar="INTEGER")
-    opts = parser.parse_args()
-
-    if opts.rterid is None:
-        print "%s:  Missing --rterid value" % sys.argv[0]
-        sys.exit(1)
-
-    dbpwd = getpass.getpass("Database password for '%s': " % opts.dbuser)
-
-    try:
-        dbc = Database(host=opts.dbhost, port=opts.dbport,
-                       user=opts.dbuser, password=dbpwd, database=opts.dbname)
-    except Exception, err:
-        print "Could not connect to the database: %s" % str(err)
-        sys.exit(2)
-
-    # Do the cleanup
-    do_delete(dbc, "cyclic_rawdata", opts.rterid)
-    do_delete(dbc, "cyclic_statistics", opts.rterid)
-    do_delete(dbc, "rtevalruns_details", opts.rterid)
-    do_delete(dbc, "rtevalruns", opts.rterid)
-
-    dbc.COMMIT()
-else:
-    raise Exception, "This is a standalone program, not a module to be imported"
diff --git a/server/rteval-parser.spec b/server/rteval-parser.spec
deleted file mode 100644
index 00c75bf..0000000
--- a/server/rteval-parser.spec
+++ /dev/null
@@ -1,133 +0,0 @@ 
-Name:		rteval-parser
-Version:	1.6
-%define sqlschemaver 1.5
-Release:	1%{?dist}
-Summary:	Report parser daemon for  rteval XML-RPC
-%define pkgname rteval-xmlrpc-%{version}
-
-Group:		Applications/System
-License:	GPLv2
-URL:		http://git.kernel.org/?p=linux/kernel/git/clrkwllms/rteval.git
-Source0:	%{pkgname}.tar.gz
-BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-
-BuildRequires:	postgresql-devel libxml2-devel libxslt-devel
-Requires:	postgresql httpd mod_wsgi
-Requires(post): chkconfig
-Requires(preun): chkconfig
-Requires(preun): /sbin/service
-
-
-%description
-The XML parser daemon (rteval-parserd) will parse the received reports
-and save them in a database for further processing.
-
-%package -n rteval-xmlrpc
-Summary:	XML-RPC server and parser for rteval
-BuildArch:	noarch
-
-
-%description -n rteval-xmlrpc
-The XML-RPC server is using Apache and mod_python to receive reports from
-rteval clients submitting test results via an XML-RPC API.
-
-
-%prep
-%setup -q -n %{pkgname}
-
-
-%build
-%configure --with-xmlrpc-webroot=%{_localstatedir}/www/html/rteval --docdir=%{_defaultdocdir}/%{pkgname}
-make %{?_smp_mflags}
-
-
-%install
-rm -rf $RPM_BUILD_ROOT
-make install DESTDIR=$RPM_BUILD_ROOT
-mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/httpd/conf.d
-cp apache-rteval.conf $RPM_BUILD_ROOT/%{_sysconfdir}/httpd/conf.d/rteval-xmlrpc.conf
-
-# Move the init script and config file from docs, to the proper place on RHEL/Fedora
-mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/init.d $RPM_BUILD_ROOT/%{_sysconfdir}/sysconfig
-mv $RPM_BUILD_ROOT/%{_defaultdocdir}/%{pkgname}/initscripts/rteval-parserd.init $RPM_BUILD_ROOT/%{_sysconfdir}/init.d/rteval-parserd
-mv $RPM_BUILD_ROOT/%{_defaultdocdir}/%{pkgname}/initscripts/rteval-parserd.sysconfig $RPM_BUILD_ROOT/%{_sysconfdir}/sysconfig/rteval-parserd
-rmdir $RPM_BUILD_ROOT/%{_defaultdocdir}/%{pkgname}/initscripts
-
-
-%post
-/sbin/chkconfig --add rteval-parserd
-
-
-%preun
-if [ "$1" = 0 ] ; then
-   /sbin/service rteval-parserd stop > /dev/null 2>&1
-   /sbin/chkconfig --del rteval-parserd
-fi
-exit 0
-
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-
-%files
-%defattr(-,root,root,-)
-%doc COPYING parser/README.parser sql/rteval-%{sqlschemaver}.sql sql/delta-*_*.sql
-%config(noreplace) %{_sysconfdir}/sysconfig/rteval-parserd
-%attr(0755,root,root) %{_sysconfdir}/init.d/rteval-parserd
-%{_bindir}/rteval-parserd
-%{_datadir}/rteval/xmlparser.xsl
-
-
-%files -n rteval-xmlrpc
-%defattr(-,root,root,-)
-%doc COPYING README.xmlrpc
-%config(noreplace) %{_sysconfdir}/httpd/conf.d/rteval-xmlrpc.conf
-%{_localstatedir}/www/html/rteval/
-
-
-%changelog
-* Thu Nov 15 2012 David Sommerseth <davids@redhat.com> - 1.6-1
-- Make rteval-parserd have no hard coded measurement data table restrictions
-- Added support for hwlatdetect data
-
-* Fri Oct  7 2011 David Sommerseth <dazo@users.sourceforge.net> - 1.5-1
-- Added support for storing data as arrays in PostgreSQL
-- Updated SQL schema to store CPU topology/core spread as an array in the database
-
-* Fri Feb  4 2011 David Sommerseth <dazo@users.sourceforge.net> - 1.4-1
-- Added support for mod_wsgi
-- Updated SQL schema, to add rteval annotations to an explicit database column
-
-* Fri Apr  9 2010 David Sommerseth <davids@redhat.com> - 1.3-1
-- Updated XML-RPC server, added Hello method
-
-* Fri Mar 26 2010 David Sommerseth <davids@redhat.com> - 1.2-2
-- Improved logging
-
-* Fri Mar 26 2010 David Sommerseth <davids@redhat.com> - 1.2-1
-- Cleaned up xmlparser.xsl
-- Honour 'isnull' attributes in SQL XML
-- Improved IP address handling on system registration when ipaddr == NULL
-- Fixed wrong GRANT statement in rteval_info table
-
-* Mon Mar 22 2010 David Sommerseth <davids@redhat.com> - 1.1-2
-- rteval-xmlrpc.spec renamed to rteval-parser.spec
-- Split XML-RPC noarch related files and the binary part with rteval-parserd
-- Reorganised the .spec file - rteval-xmlrpc RPM is now a noarch sub-package
-- Consider the renamed rteval_parserd -> rteval-parserd
-- Install /etc/init.d/rteval-parserd and /etc/sysconfig/rteval-parserd
-
-* Tue Dec  8 2009 David Sommerseth <davids@redhat.com> - 1.1-1
-- Updated to rteval-xmlrpc v1.1
-  - Added new database table, rteval_info, containing some information about the
-    rteval-xmlrpc installation
-  - Made rteval_parserd aware of which SQL schema version it is working against
-  - Added 'schemaver' attributes to <sqldata/> tags, defining which SQL schema
-    version which is needed
-  - Added mean_absolute_deviation and variance fields from rteval XML reports to
-    the database
-
-* Thu Dec  3 2009 David Sommerseth <davids@redhat.com> - 1.0-1
-- Inital rteval-xmlrpc.spec file
-
diff --git a/server/rteval_testserver.py b/server/rteval_testserver.py
deleted file mode 100644
index f141b52..0000000
--- a/server/rteval_testserver.py
+++ /dev/null
@@ -1,107 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   rteval_testserver.py
-#   Local XML-RPC test server.  Can be used to verify XML-RPC behavoiur
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import os
-import sys
-import signal
-from xmlrpc.server import SimpleXMLRPCServer
-from xmlrpc.server import SimpleXMLRPCRequestHandler
-import argparse
-
-import xmlrpc_API1
-from Logger import Logger
-
-# Default values
-LISTEN="127.0.0.1"
-PORT=65432
-
-# Restrict to a particular path.
-class RequestHandler(SimpleXMLRPCRequestHandler):
-    rpc_paths = ('/rteval/API1/',)
-
-
-class RTevald_config(object):
-    def __init__(self):
-        self.config = {'datadir': '/tmp/rteval-xmlrpc-testsrv',
-                       'db_server': 'localhost',
-                       'db_port': 5432,
-                       'database': 'dummy',
-                       'db_username': None,
-                       'db_password': None}
-        self.__update_vars()
-
-    def __update_vars(self):
-        for k in list(self.config.keys()):
-            self.__dict__[k] = self.config[k]
-
-
-class RTevald():
-    def __init__(self, options, log):
-        self.options = options
-        self.log = log
-        self.server = None
-        self.config = RTevald_config()
-
-    def __prepare_datadir(self):
-        startdir = os.getcwd()
-        for dir in self.config.datadir.split("/"):
-            if dir is '':
-                continue
-            if not os.path.exists(dir):
-                os.mkdir(dir, 0o700)
-            os.chdir(dir)
-        if not os.path.exists('queue'):
-            os.mkdir('queue', 0o700)
-        os.chdir(startdir)
-
-    def StartServer(self):
-        # Create server
-        self.server = SimpleXMLRPCServer((self.options.listen, self.options.port),
-                                         requestHandler=RequestHandler)
-        self.server.register_introspection_functions()
-
-        # setup a class to handle requests
-        self.server.register_instance(xmlrpc_API1.XMLRPC_API1(self.config, nodbaction=True, debug=True))
-
-        # Run the server's main loop
-        self.log.Log("StartServer", "Listening on %s:%i" % (self.options.listen, self.options.port))
-        try:
-            self.__prepare_datadir()
-            self.server.serve_forever()
-        except KeyboardInterrupt:
-            self.log.Log("StartServer", "Server caught SIGINT")
-            self.server.shutdown()
-        finally:
-            self.log.Log("StartServer", "Server stopped")
-
-    def StopServer(self):
-        self.server.shutdown()
-
-
-logger = None
-rtevalserver = None
-
-#
-#  M A I N   F U N C T I O N
-#
-
-if __name__ == '__main__':
-    parser = argparse.ArgumentParser(version="%prog v0.1")
-
-    parser.add_argument("-L", "--listen", action="store", dest="listen", default=LISTEN,
-                      help="Which interface to listen to [default: %default]", metavar="IPADDR")
-    parser.add_argument("-P", "--port", action="store", type="int", dest="port", default=PORT,
-                      help="Which port to listen to [default: %default]",  metavar="PORT")
-    parser.add_argument("-l", "--log", action="store", dest="logfile", default=None,
-                      help="Where to log requests.", metavar="FILE")
-
-    options = parser.parse_args()
-
-    logger = Logger(options.logfile, "RTeval")
-    rtevalserver = RTevald(options, logger)
-    rtevalserver.StartServer()
diff --git a/server/rteval_xmlrpc.py b/server/rteval_xmlrpc.py
deleted file mode 100644
index b63b7d8..0000000
--- a/server/rteval_xmlrpc.py
+++ /dev/null
@@ -1,71 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   rteval_xmlrpc.py
-#   XML-RPC handler for mod_python which will receive requests
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import types
-from mod_python import apache
-from xmlrpc.client import dumps, loads, Fault
-from xmlrpc_API1 import XMLRPC_API1
-from rteval.rtevalConfig import rtevalConfig
-
-
-def Dispatch(req, method, args):
-    # Default configuration
-    defcfg = {'xmlrpc_server': { 'datadir':     '/var/lib/rteval',
-                                 'db_server':   'localhost',
-                                 'db_port':     5432,
-                                 'database':    'rteval',
-                                 'db_username': 'rtevxmlrpc',
-                                 'db_password': 'rtevaldb'
-                                 }
-              }
-
-    # Fetch configuration
-    cfg = rtevalConfig(defcfg)
-    cfg.Load(append=True)
-
-    # Prepare an object for executing the query
-    xmlrpc = XMLRPC_API1(config=cfg.GetSection('xmlrpc_server'))
-
-    # Exectute it
-    result = xmlrpc.Dispatch(method, args)
-
-    # Send the result
-    if type(result) == tuple:
-        req.write(dumps(result, None, methodresponse=1))
-    else:
-        req.write(dumps((result,), None, methodresponse=1))
-
-
-def handler(req):
-    # Only accept POST requests
-    if req.method != 'POST':
-        req.content_type = 'text/plain'
-        req.send_http_header()
-        req.write("Not valid XML-RPC POST request")
-        return apache.OK
-
-    # Fetch the request
-    body = req.read()
-
-    # Prepare response
-    req.content_type = "text/xml"
-    req.send_http_header()
-
-    # Process request
-    try:
-        args, method = loads(body)
-    except:
-        fault = Fault(0x001, "Invalid XML-RPC error")
-        req.write(dumps(fault, methodresponse=1))
-        return apache.OK
-
-    # Execute it.  The calling function is
-    # responsive for responding to the request.
-    Dispatch(req, method, args)
-
-    return apache.OK
diff --git a/server/rteval_xmlrpc.wsgi b/server/rteval_xmlrpc.wsgi
deleted file mode 100644
index 1bf6661..0000000
--- a/server/rteval_xmlrpc.wsgi
+++ /dev/null
@@ -1,94 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   rteval_xmlrpc.wsgi
-#   XML-RPC handler for the rteval server, using mod_wsgi
-#
-#   Copyright 2011 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-from wsgiref.simple_server import make_server
-import types
-from xmlrpclib import dumps, loads, Fault
-from xmlrpc_API1 import XMLRPC_API1
-from rteval.rtevalConfig import rtevalConfig
-
-def rtevalXMLRPC_Dispatch(method, args):
-    # Default configuration
-    defcfg = {'xmlrpc_server': { 'datadir':     './var/lib/rteval',
-                                 'db_server':   'localhost',
-                                 'db_port':     5432,
-                                 'database':    'rteval',
-                                 'db_username': 'rtevxmlrpc',
-                                 'db_password': 'rtevaldb'
-                                 }
-              }
-
-    # Fetch configuration
-    cfg = rtevalConfig(defcfg)
-    cfg.Load(append=True)
-
-    # Prepare an object for executing the query
-    xmlrpc = XMLRPC_API1(config=cfg.GetSection('xmlrpc_server'))
-
-    # Exectute it
-    result = xmlrpc.Dispatch(method, args)
-
-    # Send the result
-    if type(result) == types.TupleType:
-        return dumps(result, None, methodresponse=1)
-    else:
-        return dumps((result,), None, methodresponse=1)
-
-
-def rtevalXMLRPC_handler(environ, start_response):
-
-   # the environment variable CONTENT_LENGTH may be empty or missing
-   try:
-      request_body_size = int(environ.get('CONTENT_LENGTH', 0))
-   except (ValueError):
-      request_body_size = 0
-
-   # When the method is POST the query string will be sent
-   # in the HTTP request body which is passed by the WSGI server
-   # in the file like wsgi.input environment variable.
-   try:
-       if (environ['REQUEST_METHOD'] != 'POST') or (request_body_size < 1):
-           raise Exception('Error in request')
-
-       request_body = environ['wsgi.input'].read(request_body_size)
-       try:
-           args, method = loads(request_body)
-       except:
-           raise Exception('Invalid XML-RPC request')
-
-       # Execute the XML-RPC call
-       status = '200 OK'
-       cont_type = 'text/xml'
-       response = [rtevalXMLRPC_Dispatch(method, args)]
-   except Exception, ex:
-       status = '500 Internal server error: %s' % str(ex)
-       cont_type = 'text/plain'
-       response = [
-           '500 Internal server error\n',
-           'ERROR: %s' % str(ex)
-           ]
-       import traceback, sys
-       traceback.print_exc(file=sys.stderr)
-
-   response_headers = [('Content-Type', cont_type),
-                       ('Content-Length', str(len("".join(response))))]
-   start_response(status, response_headers)
-   return response
-
-
-if __name__ == '__main__':
-    #
-    # Simple stand-alone XML-RPC server, if started manually
-    # Not suitable for production environments, but for testing
-    #
-    httpd = make_server('localhost', 65432, rtevalXMLRPC_handler)
-    try:
-        httpd.serve_forever()
-    except KeyboardInterrupt:
-        print "\nShutting down"
-
diff --git a/server/rtevaldb.py b/server/rtevaldb.py
deleted file mode 100644
index b13c85b..0000000
--- a/server/rtevaldb.py
+++ /dev/null
@@ -1,57 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   rtevaldb.py
-#   Function for registering a rteval summary.xml report into the database
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import os
-from database import Database
-
-def register_submission(config, clientid, filename, debug=False, noaction=False):
-    "Registers a submission of a rteval report which signalises the rteval_parserd process"
-
-    dbc = Database(host=config.db_server, port=config.db_port, database=config.database,
-                   user=config.db_username, password=config.db_password,
-                   debug=debug, noaction=noaction)
-
-    submvars = {"table": "submissionqueue",
-                "fields": ["clientid", "filename"],
-                "records": [[clientid, filename]],
-                "returning": "submid"
-                }
-
-    res = dbc.INSERT(submvars)
-    if len(res) != 1:
-        raise Exception("Could not register the submission")
-
-    dbc.COMMIT()
-    return res[0]
-
-def database_status(config, debug=False, noaction=False):
-    dbc = Database(host=config.db_server, port=config.db_port, database=config.database,
-                   user=config.db_username, password=config.db_password,
-                   debug=debug, noaction=noaction)
-    if not dbc:
-        return {"status": "No connection to pgsql://%s:%s/%s" % (config.db_server,
-                                                                 config.db_port,
-                                                                 config.database)}
-
-    res = dbc.SELECT('rtevalruns',
-                     ["to_char(CURRENT_TIMESTAMP, 'YYYY-MM-DD HH24:MI:SS') AS server_time",
-                      "max(rterid) AS last_rterid",
-                      "max(submid) AS last_submid"]
-                     )
-    if len(res) != 3:
-        return {"status": "Could not query database pgsql://%s:%s/%s" % (config.db_server,
-                                                                         config.db_port,
-                                                                         config.database)}
-    last_rterid = res['records'][0][1] and res['records'][0][1] or "(None)"
-    last_submid = res['records'][0][1] and res['records'][0][2] or "(None)"
-    return {"status": "OK",
-            "server_time": res['records'][0][0],
-            "last_rterid": last_rterid,
-            "last_submid": last_submid
-            }
-
diff --git a/server/sql/delta-1.0_1.1.sql b/server/sql/delta-1.0_1.1.sql
deleted file mode 100644
index 9fe230e..0000000
--- a/server/sql/delta-1.0_1.1.sql
+++ /dev/null
@@ -1,15 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- SQL delta update from rteval-1.0.sql to rteval-1.1.sql
-
-CREATE TABLE rteval_info (
-       key    varchar(32) NOT NULL,
-       value  TEXT NOT NULL,
-       rtiid  SERIAL,
-       PRIMARY KEY(rtiid)
-);
-GRANT SELECT ON rteval_info TO rtevparser;
-INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.1');
-
-ALTER TABLE cyclic_statistics ADD COLUMN mean_abs_dev REAL;
-ALTER TABLE cyclic_statistics ADD COLUMN variance REAL;
-
diff --git a/server/sql/delta-1.1_1.2.sql b/server/sql/delta-1.1_1.2.sql
deleted file mode 100644
index e5d82ab..0000000
--- a/server/sql/delta-1.1_1.2.sql
+++ /dev/null
@@ -1,9 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- SQL delta update from rteval-1.1.sql to rteval-1.2.sql
-
-UPDATE rteval_info SET value = '1.2' WHERE key = 'sql_schema_ver';
-
-ALTER TABLE rtevalruns ADD COLUMN distro VARCHAR(128);
-ALTER TABLE rtevalruns_details ADD COLUMN num_cpu_cores INTEGER;
-ALTER TABLE rtevalruns_details ADD COLUMN num_cpu_sockets INTEGER;
-ALTER TABLE rtevalruns_details ADD COLUMN numa_nodes INTEGER;
diff --git a/server/sql/delta-1.2_1.3.sql b/server/sql/delta-1.2_1.3.sql
deleted file mode 100644
index 1c10bf2..0000000
--- a/server/sql/delta-1.2_1.3.sql
+++ /dev/null
@@ -1,6 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- SQL delta update from rteval-1.2.sql to rteval-1.3.sql
-
-UPDATE rteval_info SET value = '1.3' WHERE key = 'sql_schema_ver';
-
-ALTER TABLE rtevalruns_details ADD COLUMN annotation TEXT;
diff --git a/server/sql/delta-1.3_1.4.sql b/server/sql/delta-1.3_1.4.sql
deleted file mode 100644
index e0c0162..0000000
--- a/server/sql/delta-1.3_1.4.sql
+++ /dev/null
@@ -1,6 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- SQL delta update from rteval-1.3.sql to rteval-1.4.sql
-
-UPDATE rteval_info SET value = '1.4' WHERE key = 'sql_schema_ver';
-
-ALTER TABLE rtevalruns_details ADD COLUMN cpu_core_spread INTEGER[];
diff --git a/server/sql/delta-1.4_1.5.sql b/server/sql/delta-1.4_1.5.sql
deleted file mode 100644
index bd1336e..0000000
--- a/server/sql/delta-1.4_1.5.sql
+++ /dev/null
@@ -1,31 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- SQL delta update from rteval-1.4.sql to rteval-1.5.sql
-
-UPDATE rteval_info SET value = '1.5' WHERE key = 'sql_schema_ver';
-
--- TABLE: hwlatdetect_summary
--- Tracks hwlatdetect results for a particular hardware
---
-   CREATE TABLE hwlatdetect_summary (
-       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-       duration       INTEGER NOT NULL,
-       threshold      INTEGER NOT NULL,
-       timewindow     INTEGER NOT NULL,
-       width          INTEGER NOT NULL,
-       samplecount    INTEGER NOT NULL,
-       hwlat_min      REAL NOT NULL,
-       hwlat_avg      REAL NOT NULL,
-       hwlat_max      REAL NOT NULL
-   ) WITHOUT OIDS;
-   GRANT SELECT, INSERT ON hwlatdetect_summary TO rtevparser;
-
--- TABLE: hwlatdetect_samples
--- Contains the hwlatdetect sample records from a particular run
---
-   CREATE TABLE hwlatdetect_samples (
-       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-       timestamp      NUMERIC(20,10) NOT NULL,
-       latency        REAL NOT NULL
-   ) WITHOUT OIDS;
-   GRANT SELECT, INSERT ON hwlatdetect_samples TO rtevparser;
-
diff --git a/server/sql/rteval-1.0.sql b/server/sql/rteval-1.0.sql
deleted file mode 100644
index 107c90e..0000000
--- a/server/sql/rteval-1.0.sql
+++ /dev/null
@@ -1,189 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- Create rteval database users
---
-CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
-CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
-
--- Create rteval database
---
-CREATE DATABASE rteval ENCODING 'utf-8';
-
-\c rteval
-
--- Enable plpgsql.  It is expected that this PL/pgSQL is available.
-CREATE LANGUAGE 'plpgsql';
-
--- FUNCTION: trgfnc_submqueue_notify
--- Trigger function which is called on INSERT queries to the submissionqueue table.
--- It will send a NOTIFY rteval_submq on INSERTs.
---
-    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
-    AS $BODY$
-      DECLARE
-      BEGIN
-        NOTIFY rteval_submq;
-        RETURN NEW;
-      END
-    $BODY$ LANGUAGE 'plpgsql';
-
-    -- The user(s) which are allowed to do INSERT on the submissionqueue
-    -- must also be allowed to call this trigger function.
-    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
-
--- TABLE: submissionqueue
--- All XML-RPC clients registers their submissions into this table.  Another parser thread
--- will pickup the records where parsestart IS NULL.
---
-    CREATE TABLE submissionqueue (
-           clientid   varchar(128) NOT NULL,
-           filename   VARCHAR(1024) NOT NULL,
-           status     INTEGER DEFAULT '0',
-           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
-           parsestart TIMESTAMP WITH TIME ZONE,
-           parseend   TIMESTAMP WITH TIME ZONE,
-           submid     SERIAL,
-           PRIMARY KEY(submid)
-    ) WITH OIDS;
-    CREATE INDEX submissionq_status ON submissionqueue(status);
-
-    CREATE TRIGGER trg_submissionqueue AFTER INSERT
-           ON submissionqueue FOR EACH STATEMENT
-	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
-
-    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
-    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
-    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
-
--- TABLE: systems
--- Overview table over all systems which have sent reports
--- The dmidata column will keep the complete DMIdata available
--- for further information about the system.
---
-    CREATE TABLE systems (
-        syskey        SERIAL NOT NULL,
-        sysid         VARCHAR(64) NOT NULL,
-        dmidata       xml NOT NULL,
-        PRIMARY KEY(syskey)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON systems TO rtevparser;
-    GRANT USAGE ON systems_syskey_seq TO rtevparser;
-
--- TABLE: systems_hostname
--- This table is used to track the hostnames and IP addresses
--- a registered system have used over time
---
-   CREATE TABLE systems_hostname (
-        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
-        hostname      VARCHAR(256) NOT NULL,
-        ipaddr        cidr      
-    ) WITH OIDS;
-    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
-    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
-    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
-
-    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
-
-
--- TABLE: rtevalruns
--- Overview over all rteval runs, when they were run and how long they ran.
---
-    CREATE TABLE rtevalruns (
-        rterid          SERIAL NOT NULL, -- RTEval Run Id
-        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
-        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
-        kernel_ver      VARCHAR(32) NOT NULL,
-        kernel_rt       BOOLEAN NOT NULL,
-        arch            VARCHAR(12) NOT NULL,
-        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
-        run_duration    INTEGER NOT NULL,
-        load_avg        REAL NOT NULL,
-        version         VARCHAR(4), -- Version of rteval
-        report_filename TEXT,
-        PRIMARY KEY(rterid)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
-    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
-    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
-
--- TABLE rtevalruns_details
--- More specific information on the rteval run.  The data is stored
--- in XML for flexibility
---
--- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
--- /rteval/loads and /rteval/cyclictest/command_line
---
-    CREATE TABLE rtevalruns_details (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        xmldata       xml NOT NULL,
-        PRIMARY KEY(rterid)
-    );
-    GRANT INSERT ON rtevalruns_details TO rtevparser;
-
--- TABLE: cyclic_statistics
--- This table keeps statistics overview over a particular rteval run
---
-    CREATE TABLE cyclic_statistics (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        coreid        INTEGER, -- NULL=system
-        priority      INTEGER, -- NULL=system
-        num_samples   BIGINT NOT NULL,
-        lat_min       REAL NOT NULL,
-        lat_max       REAL NOT NULL,
-        lat_mean      REAL NOT NULL,
-        mode          REAL NOT NULL,
-        range         REAL NOT NULL,
-        median        REAL NOT NULL,
-        stddev        REAL NOT NULL,
-        cstid         SERIAL NOT NULL, -- unique record ID
-        PRIMARY KEY(cstid)
-    ) WITH OIDS;
-    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
-
-    GRANT INSERT ON cyclic_statistics TO rtevparser;
-    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
-
--- TABLE: cyclic_histogram
--- This table keeps the raw histogram data for each rteval run being
--- reported.
---
-    CREATE TABLE cyclic_histogram (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        core          INTEGER, -- NULL=system
-        index         INTEGER NOT NULL,
-        value         BIGINT NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
-
-    GRANT INSERT ON cyclic_histogram TO rtevparser;
-
--- TABLE: cyclic_rawdata
--- This table keeps the raw data for each rteval run being reported.
--- Due to that it will be an enormous amount of data, we avoid using
--- OID on this table.
---
-    CREATE TABLE cyclic_rawdata (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        cpu_num       INTEGER NOT NULL,
-        sampleseq     INTEGER NOT NULL,
-        latency       REAL NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
-
-    GRANT INSERT ON cyclic_rawdata TO rtevparser;
-
--- TABLE: notes
--- This table is purely to make notes, connected to different 
--- records in the database
---
-    CREATE TABLE notes (
-        ntid          SERIAL NOT NULL,
-        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
-        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
-        notes         TEXT NOT NULL,
-        createdby     VARCHAR(48),
-        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
-        PRIMARY KEY(ntid)
-    ) WITH OIDS;
-    CREATE INDEX notes_refid ON notes(reftbl,refid);
diff --git a/server/sql/rteval-1.1.sql b/server/sql/rteval-1.1.sql
deleted file mode 100644
index 6ec783f..0000000
--- a/server/sql/rteval-1.1.sql
+++ /dev/null
@@ -1,203 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- Create rteval database users
---
-CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
-CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
-
--- Create rteval database
---
-CREATE DATABASE rteval ENCODING 'utf-8';
-
-\c rteval
-
--- TABLE: rteval_info
--- Contains information the current rteval XML-RPC and parser installation
---
-    CREATE TABLE rteval_info (
-       key    varchar(32) NOT NULL,
-       value  TEXT NOT NULL,
-       rtiid  SERIAL,
-       PRIMARY KEY(rtiid)
-    );
-    GRANT SELECT ON rteval_info TO rtevaldb_parser;
-    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.1');
-
--- Enable plpgsql.  It is expected that this PL/pgSQL is available.
-    CREATE LANGUAGE 'plpgsql';
-
--- FUNCTION: trgfnc_submqueue_notify
--- Trigger function which is called on INSERT queries to the submissionqueue table.
--- It will send a NOTIFY rteval_submq on INSERTs.
---
-    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
-    AS $BODY$
-      DECLARE
-      BEGIN
-        NOTIFY rteval_submq;
-        RETURN NEW;
-      END
-    $BODY$ LANGUAGE 'plpgsql';
-
-    -- The user(s) which are allowed to do INSERT on the submissionqueue
-    -- must also be allowed to call this trigger function.
-    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
-
--- TABLE: submissionqueue
--- All XML-RPC clients registers their submissions into this table.  Another parser thread
--- will pickup the records where parsestart IS NULL.
---
-    CREATE TABLE submissionqueue (
-           clientid   varchar(128) NOT NULL,
-           filename   VARCHAR(1024) NOT NULL,
-           status     INTEGER DEFAULT '0',
-           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
-           parsestart TIMESTAMP WITH TIME ZONE,
-           parseend   TIMESTAMP WITH TIME ZONE,
-           submid     SERIAL,
-           PRIMARY KEY(submid)
-    ) WITH OIDS;
-    CREATE INDEX submissionq_status ON submissionqueue(status);
-
-    CREATE TRIGGER trg_submissionqueue AFTER INSERT
-           ON submissionqueue FOR EACH STATEMENT
-	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
-
-    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
-    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
-    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
-
--- TABLE: systems
--- Overview table over all systems which have sent reports
--- The dmidata column will keep the complete DMIdata available
--- for further information about the system.
---
-    CREATE TABLE systems (
-        syskey        SERIAL NOT NULL,
-        sysid         VARCHAR(64) NOT NULL,
-        dmidata       xml NOT NULL,
-        PRIMARY KEY(syskey)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON systems TO rtevparser;
-    GRANT USAGE ON systems_syskey_seq TO rtevparser;
-
--- TABLE: systems_hostname
--- This table is used to track the hostnames and IP addresses
--- a registered system have used over time
---
-   CREATE TABLE systems_hostname (
-        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
-        hostname      VARCHAR(256) NOT NULL,
-        ipaddr        cidr
-    ) WITH OIDS;
-    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
-    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
-    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
-
-    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
-
-
--- TABLE: rtevalruns
--- Overview over all rteval runs, when they were run and how long they ran.
---
-    CREATE TABLE rtevalruns (
-        rterid          SERIAL NOT NULL, -- RTEval Run Id
-        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
-        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
-        kernel_ver      VARCHAR(32) NOT NULL,
-        kernel_rt       BOOLEAN NOT NULL,
-        arch            VARCHAR(12) NOT NULL,
-        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
-        run_duration    INTEGER NOT NULL,
-        load_avg        REAL NOT NULL,
-        version         VARCHAR(4), -- Version of rteval
-        report_filename TEXT,
-        PRIMARY KEY(rterid)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
-    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
-    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
-
--- TABLE rtevalruns_details
--- More specific information on the rteval run.  The data is stored
--- in XML for flexibility
---
--- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
--- /rteval/loads and /rteval/cyclictest/command_line
---
-    CREATE TABLE rtevalruns_details (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        xmldata       xml NOT NULL,
-        PRIMARY KEY(rterid)
-    );
-    GRANT INSERT ON rtevalruns_details TO rtevparser;
-
--- TABLE: cyclic_statistics
--- This table keeps statistics overview over a particular rteval run
---
-    CREATE TABLE cyclic_statistics (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        coreid        INTEGER, -- NULL=system
-        priority      INTEGER, -- NULL=system
-        num_samples   BIGINT NOT NULL,
-        lat_min       REAL NOT NULL,
-        lat_max       REAL NOT NULL,
-        lat_mean      REAL NOT NULL,
-        mode          REAL NOT NULL,
-        range         REAL NOT NULL,
-        median        REAL NOT NULL,
-        stddev        REAL NOT NULL,
-	mean_abs_dev  REAL NOT NULL,
-	variance      REAL NOT NULL,
-        cstid         SERIAL NOT NULL, -- unique record ID
-        PRIMARY KEY(cstid)
-    ) WITH OIDS;
-    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
-
-    GRANT INSERT ON cyclic_statistics TO rtevparser;
-    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
-
--- TABLE: cyclic_histogram
--- This table keeps the raw histogram data for each rteval run being
--- reported.
---
-    CREATE TABLE cyclic_histogram (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        core          INTEGER, -- NULL=system
-        index         INTEGER NOT NULL,
-        value         BIGINT NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
-
-    GRANT INSERT ON cyclic_histogram TO rtevparser;
-
--- TABLE: cyclic_rawdata
--- This table keeps the raw data for each rteval run being reported.
--- Due to that it will be an enormous amount of data, we avoid using
--- OID on this table.
---
-    CREATE TABLE cyclic_rawdata (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        cpu_num       INTEGER NOT NULL,
-        sampleseq     INTEGER NOT NULL,
-        latency       REAL NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
-
-    GRANT INSERT ON cyclic_rawdata TO rtevparser;
-
--- TABLE: notes
--- This table is purely to make notes, connected to different
--- records in the database
---
-    CREATE TABLE notes (
-        ntid          SERIAL NOT NULL,
-        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
-        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
-        notes         TEXT NOT NULL,
-        createdby     VARCHAR(48),
-        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
-        PRIMARY KEY(ntid)
-    ) WITH OIDS;
-    CREATE INDEX notes_refid ON notes(reftbl,refid);
diff --git a/server/sql/rteval-1.2.sql b/server/sql/rteval-1.2.sql
deleted file mode 100644
index 4a37eb6..0000000
--- a/server/sql/rteval-1.2.sql
+++ /dev/null
@@ -1,207 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- Create rteval database users
---
-CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
-CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
-
--- Create rteval database
---
-CREATE DATABASE rteval ENCODING 'utf-8';
-
-\c rteval
-
--- TABLE: rteval_info
--- Contains information the current rteval XML-RPC and parser installation
---
-    CREATE TABLE rteval_info (
-       key    varchar(32) NOT NULL,
-       value  TEXT NOT NULL,
-       rtiid  SERIAL,
-       PRIMARY KEY(rtiid)
-    );
-    GRANT SELECT ON rteval_info TO rtevparser;
-    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.2');
-
--- Enable plpgsql.  It is expected that this PL/pgSQL is available.
-    CREATE LANGUAGE 'plpgsql';
-
--- FUNCTION: trgfnc_submqueue_notify
--- Trigger function which is called on INSERT queries to the submissionqueue table.
--- It will send a NOTIFY rteval_submq on INSERTs.
---
-    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
-    AS $BODY$
-      DECLARE
-      BEGIN
-        NOTIFY rteval_submq;
-        RETURN NEW;
-      END
-    $BODY$ LANGUAGE 'plpgsql';
-
-    -- The user(s) which are allowed to do INSERT on the submissionqueue
-    -- must also be allowed to call this trigger function.
-    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
-
--- TABLE: submissionqueue
--- All XML-RPC clients registers their submissions into this table.  Another parser thread
--- will pickup the records where parsestart IS NULL.
---
-    CREATE TABLE submissionqueue (
-           clientid   varchar(128) NOT NULL,
-           filename   VARCHAR(1024) NOT NULL,
-           status     INTEGER DEFAULT '0',
-           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
-           parsestart TIMESTAMP WITH TIME ZONE,
-           parseend   TIMESTAMP WITH TIME ZONE,
-           submid     SERIAL,
-           PRIMARY KEY(submid)
-    ) WITH OIDS;
-    CREATE INDEX submissionq_status ON submissionqueue(status);
-
-    CREATE TRIGGER trg_submissionqueue AFTER INSERT
-           ON submissionqueue FOR EACH STATEMENT
-	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
-
-    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
-    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
-    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
-
--- TABLE: systems
--- Overview table over all systems which have sent reports
--- The dmidata column will keep the complete DMIdata available
--- for further information about the system.
---
-    CREATE TABLE systems (
-        syskey        SERIAL NOT NULL,
-        sysid         VARCHAR(64) NOT NULL,
-        dmidata       xml NOT NULL,
-        PRIMARY KEY(syskey)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON systems TO rtevparser;
-    GRANT USAGE ON systems_syskey_seq TO rtevparser;
-
--- TABLE: systems_hostname
--- This table is used to track the hostnames and IP addresses
--- a registered system have used over time
---
-   CREATE TABLE systems_hostname (
-        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
-        hostname      VARCHAR(256) NOT NULL,
-        ipaddr        cidr
-    ) WITH OIDS;
-    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
-    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
-    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
-
-    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
-
-
--- TABLE: rtevalruns
--- Overview over all rteval runs, when they were run and how long they ran.
---
-    CREATE TABLE rtevalruns (
-        rterid          SERIAL NOT NULL, -- RTEval Run Id
-        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
-        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
-        kernel_ver      VARCHAR(32) NOT NULL,
-        kernel_rt       BOOLEAN NOT NULL,
-        arch            VARCHAR(12) NOT NULL,
-	distro		VARCHAR(64),
-        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
-        run_duration    INTEGER NOT NULL,
-        load_avg        REAL NOT NULL,
-        version         VARCHAR(4), -- Version of rteval
-        report_filename TEXT,
-        PRIMARY KEY(rterid)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
-    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
-    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
-
--- TABLE rtevalruns_details
--- More specific information on the rteval run.  The data is stored
--- in XML for flexibility
---
--- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
--- /rteval/loads and /rteval/cyclictest/command_line
---
-    CREATE TABLE rtevalruns_details (
-        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        num_cpu_cores   INTEGER,
-        num_cpu_sockets INTEGER,
-        numa_nodes      INTEGER,
-        xmldata         xml NOT NULL,
-        PRIMARY KEY(rterid)
-    );
-    GRANT INSERT ON rtevalruns_details TO rtevparser;
-
--- TABLE: cyclic_statistics
--- This table keeps statistics overview over a particular rteval run
---
-    CREATE TABLE cyclic_statistics (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        coreid        INTEGER, -- NULL=system
-        priority      INTEGER, -- NULL=system
-        num_samples   BIGINT NOT NULL,
-        lat_min       REAL NOT NULL,
-        lat_max       REAL NOT NULL,
-        lat_mean      REAL NOT NULL,
-        mode          REAL NOT NULL,
-        range         REAL NOT NULL,
-        median        REAL NOT NULL,
-        stddev        REAL NOT NULL,
-	mean_abs_dev  REAL NOT NULL,
-	variance      REAL NOT NULL,
-        cstid         SERIAL NOT NULL, -- unique record ID
-        PRIMARY KEY(cstid)
-    ) WITH OIDS;
-    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
-
-    GRANT INSERT ON cyclic_statistics TO rtevparser;
-    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
-
--- TABLE: cyclic_histogram
--- This table keeps the raw histogram data for each rteval run being
--- reported.
---
-    CREATE TABLE cyclic_histogram (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        core          INTEGER, -- NULL=system
-        index         INTEGER NOT NULL,
-        value         BIGINT NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
-
-    GRANT INSERT ON cyclic_histogram TO rtevparser;
-
--- TABLE: cyclic_rawdata
--- This table keeps the raw data for each rteval run being reported.
--- Due to that it will be an enormous amount of data, we avoid using
--- OID on this table.
---
-    CREATE TABLE cyclic_rawdata (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        cpu_num       INTEGER NOT NULL,
-        sampleseq     INTEGER NOT NULL,
-        latency       REAL NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
-
-    GRANT INSERT ON cyclic_rawdata TO rtevparser;
-
--- TABLE: notes
--- This table is purely to make notes, connected to different
--- records in the database
---
-    CREATE TABLE notes (
-        ntid          SERIAL NOT NULL,
-        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
-        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
-        notes         TEXT NOT NULL,
-        createdby     VARCHAR(48),
-        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
-        PRIMARY KEY(ntid)
-    ) WITH OIDS;
-    CREATE INDEX notes_refid ON notes(reftbl,refid);
diff --git a/server/sql/rteval-1.3.sql b/server/sql/rteval-1.3.sql
deleted file mode 100644
index ca7837b..0000000
--- a/server/sql/rteval-1.3.sql
+++ /dev/null
@@ -1,208 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- Create rteval database users
---
-CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
-CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
-
--- Create rteval database
---
-CREATE DATABASE rteval ENCODING 'utf-8';
-
-\c rteval
-
--- TABLE: rteval_info
--- Contains information the current rteval XML-RPC and parser installation
---
-    CREATE TABLE rteval_info (
-       key    varchar(32) NOT NULL,
-       value  TEXT NOT NULL,
-       rtiid  SERIAL,
-       PRIMARY KEY(rtiid)
-    );
-    GRANT SELECT ON rteval_info TO rtevparser;
-    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.3');
-
--- Enable plpgsql.  It is expected that this PL/pgSQL is available.
-    CREATE LANGUAGE 'plpgsql';
-
--- FUNCTION: trgfnc_submqueue_notify
--- Trigger function which is called on INSERT queries to the submissionqueue table.
--- It will send a NOTIFY rteval_submq on INSERTs.
---
-    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
-    AS $BODY$
-      DECLARE
-      BEGIN
-        NOTIFY rteval_submq;
-        RETURN NEW;
-      END
-    $BODY$ LANGUAGE 'plpgsql';
-
-    -- The user(s) which are allowed to do INSERT on the submissionqueue
-    -- must also be allowed to call this trigger function.
-    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
-
--- TABLE: submissionqueue
--- All XML-RPC clients registers their submissions into this table.  Another parser thread
--- will pickup the records where parsestart IS NULL.
---
-    CREATE TABLE submissionqueue (
-           clientid   varchar(128) NOT NULL,
-           filename   VARCHAR(1024) NOT NULL,
-           status     INTEGER DEFAULT '0',
-           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
-           parsestart TIMESTAMP WITH TIME ZONE,
-           parseend   TIMESTAMP WITH TIME ZONE,
-           submid     SERIAL,
-           PRIMARY KEY(submid)
-    ) WITH OIDS;
-    CREATE INDEX submissionq_status ON submissionqueue(status);
-
-    CREATE TRIGGER trg_submissionqueue AFTER INSERT
-           ON submissionqueue FOR EACH STATEMENT
-	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
-
-    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
-    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
-    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
-
--- TABLE: systems
--- Overview table over all systems which have sent reports
--- The dmidata column will keep the complete DMIdata available
--- for further information about the system.
---
-    CREATE TABLE systems (
-        syskey        SERIAL NOT NULL,
-        sysid         VARCHAR(64) NOT NULL,
-        dmidata       xml NOT NULL,
-        PRIMARY KEY(syskey)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON systems TO rtevparser;
-    GRANT USAGE ON systems_syskey_seq TO rtevparser;
-
--- TABLE: systems_hostname
--- This table is used to track the hostnames and IP addresses
--- a registered system have used over time
---
-   CREATE TABLE systems_hostname (
-        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
-        hostname      VARCHAR(256) NOT NULL,
-        ipaddr        cidr
-    ) WITH OIDS;
-    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
-    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
-    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
-
-    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
-
-
--- TABLE: rtevalruns
--- Overview over all rteval runs, when they were run and how long they ran.
---
-    CREATE TABLE rtevalruns (
-        rterid          SERIAL NOT NULL, -- RTEval Run Id
-        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
-        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
-        kernel_ver      VARCHAR(32) NOT NULL,
-        kernel_rt       BOOLEAN NOT NULL,
-        arch            VARCHAR(12) NOT NULL,
-	distro		VARCHAR(64),
-        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
-        run_duration    INTEGER NOT NULL,
-        load_avg        REAL NOT NULL,
-        version         VARCHAR(4), -- Version of rteval
-        report_filename TEXT,
-        PRIMARY KEY(rterid)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
-    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
-    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
-
--- TABLE rtevalruns_details
--- More specific information on the rteval run.  The data is stored
--- in XML for flexibility
---
--- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
--- /rteval/loads and /rteval/cyclictest/command_line
---
-    CREATE TABLE rtevalruns_details (
-        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        annotation      TEXT,
-        num_cpu_cores   INTEGER,
-        num_cpu_sockets INTEGER,
-        numa_nodes      INTEGER,
-        xmldata         xml NOT NULL,
-        PRIMARY KEY(rterid)
-    );
-    GRANT INSERT ON rtevalruns_details TO rtevparser;
-
--- TABLE: cyclic_statistics
--- This table keeps statistics overview over a particular rteval run
---
-    CREATE TABLE cyclic_statistics (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        coreid        INTEGER, -- NULL=system
-        priority      INTEGER, -- NULL=system
-        num_samples   BIGINT NOT NULL,
-        lat_min       REAL NOT NULL,
-        lat_max       REAL NOT NULL,
-        lat_mean      REAL NOT NULL,
-        mode          REAL NOT NULL,
-        range         REAL NOT NULL,
-        median        REAL NOT NULL,
-        stddev        REAL NOT NULL,
-	mean_abs_dev  REAL NOT NULL,
-	variance      REAL NOT NULL,
-        cstid         SERIAL NOT NULL, -- unique record ID
-        PRIMARY KEY(cstid)
-    ) WITH OIDS;
-    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
-
-    GRANT INSERT ON cyclic_statistics TO rtevparser;
-    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
-
--- TABLE: cyclic_histogram
--- This table keeps the raw histogram data for each rteval run being
--- reported.
---
-    CREATE TABLE cyclic_histogram (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        core          INTEGER, -- NULL=system
-        index         INTEGER NOT NULL,
-        value         BIGINT NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
-
-    GRANT INSERT ON cyclic_histogram TO rtevparser;
-
--- TABLE: cyclic_rawdata
--- This table keeps the raw data for each rteval run being reported.
--- Due to that it will be an enormous amount of data, we avoid using
--- OID on this table.
---
-    CREATE TABLE cyclic_rawdata (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        cpu_num       INTEGER NOT NULL,
-        sampleseq     INTEGER NOT NULL,
-        latency       REAL NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
-
-    GRANT INSERT ON cyclic_rawdata TO rtevparser;
-
--- TABLE: notes
--- This table is purely to make notes, connected to different
--- records in the database
---
-    CREATE TABLE notes (
-        ntid          SERIAL NOT NULL,
-        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
-        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
-        notes         TEXT NOT NULL,
-        createdby     VARCHAR(48),
-        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
-        PRIMARY KEY(ntid)
-    ) WITH OIDS;
-    CREATE INDEX notes_refid ON notes(reftbl,refid);
diff --git a/server/sql/rteval-1.4.sql b/server/sql/rteval-1.4.sql
deleted file mode 100644
index 6d3efdd..0000000
--- a/server/sql/rteval-1.4.sql
+++ /dev/null
@@ -1,209 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- Create rteval database users
---
-CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
-CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
-
--- Create rteval database
---
-CREATE DATABASE rteval ENCODING 'utf-8';
-
-\c rteval
-
--- TABLE: rteval_info
--- Contains information the current rteval XML-RPC and parser installation
---
-    CREATE TABLE rteval_info (
-       key    varchar(32) NOT NULL,
-       value  TEXT NOT NULL,
-       rtiid  SERIAL,
-       PRIMARY KEY(rtiid)
-    );
-    GRANT SELECT ON rteval_info TO rtevparser;
-    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.4');
-
--- Enable plpgsql.  It is expected that this PL/pgSQL is available.
-    CREATE LANGUAGE 'plpgsql';
-
--- FUNCTION: trgfnc_submqueue_notify
--- Trigger function which is called on INSERT queries to the submissionqueue table.
--- It will send a NOTIFY rteval_submq on INSERTs.
---
-    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
-    AS $BODY$
-      DECLARE
-      BEGIN
-        NOTIFY rteval_submq;
-        RETURN NEW;
-      END
-    $BODY$ LANGUAGE 'plpgsql';
-
-    -- The user(s) which are allowed to do INSERT on the submissionqueue
-    -- must also be allowed to call this trigger function.
-    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
-
--- TABLE: submissionqueue
--- All XML-RPC clients registers their submissions into this table.  Another parser thread
--- will pickup the records where parsestart IS NULL.
---
-    CREATE TABLE submissionqueue (
-           clientid   varchar(128) NOT NULL,
-           filename   VARCHAR(1024) NOT NULL,
-           status     INTEGER DEFAULT '0',
-           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
-           parsestart TIMESTAMP WITH TIME ZONE,
-           parseend   TIMESTAMP WITH TIME ZONE,
-           submid     SERIAL,
-           PRIMARY KEY(submid)
-    ) WITH OIDS;
-    CREATE INDEX submissionq_status ON submissionqueue(status);
-
-    CREATE TRIGGER trg_submissionqueue AFTER INSERT
-           ON submissionqueue FOR EACH STATEMENT
-	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
-
-    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
-    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
-    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
-
--- TABLE: systems
--- Overview table over all systems which have sent reports
--- The dmidata column will keep the complete DMIdata available
--- for further information about the system.
---
-    CREATE TABLE systems (
-        syskey        SERIAL NOT NULL,
-        sysid         VARCHAR(64) NOT NULL,
-        dmidata       xml NOT NULL,
-        PRIMARY KEY(syskey)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON systems TO rtevparser;
-    GRANT USAGE ON systems_syskey_seq TO rtevparser;
-
--- TABLE: systems_hostname
--- This table is used to track the hostnames and IP addresses
--- a registered system have used over time
---
-   CREATE TABLE systems_hostname (
-        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
-        hostname      VARCHAR(256) NOT NULL,
-        ipaddr        cidr
-    ) WITH OIDS;
-    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
-    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
-    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
-
-    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
-
-
--- TABLE: rtevalruns
--- Overview over all rteval runs, when they were run and how long they ran.
---
-    CREATE TABLE rtevalruns (
-        rterid          SERIAL NOT NULL, -- RTEval Run Id
-        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
-        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
-        kernel_ver      VARCHAR(32) NOT NULL,
-        kernel_rt       BOOLEAN NOT NULL,
-        arch            VARCHAR(12) NOT NULL,
-	distro		VARCHAR(64),
-        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
-        run_duration    INTEGER NOT NULL,
-        load_avg        REAL NOT NULL,
-        version         VARCHAR(4), -- Version of rteval
-        report_filename TEXT,
-        PRIMARY KEY(rterid)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
-    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
-    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
-
--- TABLE rtevalruns_details
--- More specific information on the rteval run.  The data is stored
--- in XML for flexibility
---
--- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
--- /rteval/loads and /rteval/cyclictest/command_line
---
-    CREATE TABLE rtevalruns_details (
-        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        annotation      TEXT,
-        num_cpu_cores   INTEGER,
-        num_cpu_sockets INTEGER,
-        cpu_core_spread INTEGER[],
-        numa_nodes      INTEGER,
-        xmldata         xml NOT NULL,
-        PRIMARY KEY(rterid)
-    );
-    GRANT INSERT ON rtevalruns_details TO rtevparser;
-
--- TABLE: cyclic_statistics
--- This table keeps statistics overview over a particular rteval run
---
-    CREATE TABLE cyclic_statistics (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        coreid        INTEGER, -- NULL=system
-        priority      INTEGER, -- NULL=system
-        num_samples   BIGINT NOT NULL,
-        lat_min       REAL NOT NULL,
-        lat_max       REAL NOT NULL,
-        lat_mean      REAL NOT NULL,
-        mode          REAL NOT NULL,
-        range         REAL NOT NULL,
-        median        REAL NOT NULL,
-        stddev        REAL NOT NULL,
-	mean_abs_dev  REAL NOT NULL,
-	variance      REAL NOT NULL,
-        cstid         SERIAL NOT NULL, -- unique record ID
-        PRIMARY KEY(cstid)
-    ) WITH OIDS;
-    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
-
-    GRANT INSERT ON cyclic_statistics TO rtevparser;
-    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
-
--- TABLE: cyclic_histogram
--- This table keeps the raw histogram data for each rteval run being
--- reported.
---
-    CREATE TABLE cyclic_histogram (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        core          INTEGER, -- NULL=system
-        index         INTEGER NOT NULL,
-        value         BIGINT NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
-
-    GRANT INSERT ON cyclic_histogram TO rtevparser;
-
--- TABLE: cyclic_rawdata
--- This table keeps the raw data for each rteval run being reported.
--- Due to that it will be an enormous amount of data, we avoid using
--- OID on this table.
---
-    CREATE TABLE cyclic_rawdata (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        cpu_num       INTEGER NOT NULL,
-        sampleseq     INTEGER NOT NULL,
-        latency       REAL NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
-
-    GRANT INSERT ON cyclic_rawdata TO rtevparser;
-
--- TABLE: notes
--- This table is purely to make notes, connected to different
--- records in the database
---
-    CREATE TABLE notes (
-        ntid          SERIAL NOT NULL,
-        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
-        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
-        notes         TEXT NOT NULL,
-        createdby     VARCHAR(48),
-        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
-        PRIMARY KEY(ntid)
-    ) WITH OIDS;
-    CREATE INDEX notes_refid ON notes(reftbl,refid);
diff --git a/server/sql/rteval-1.5.sql b/server/sql/rteval-1.5.sql
deleted file mode 100644
index 68e0fcc..0000000
--- a/server/sql/rteval-1.5.sql
+++ /dev/null
@@ -1,235 +0,0 @@ 
--- SPDX-License-Identifier: GPL-2.0-or-later
--- Create rteval database users
---
-CREATE USER rtevxmlrpc NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb';
-CREATE USER rtevparser NOSUPERUSER ENCRYPTED PASSWORD 'rtevaldb_parser';
-
--- Create rteval database
---
-CREATE DATABASE rteval ENCODING 'utf-8';
-
-\c rteval
-
--- TABLE: rteval_info
--- Contains information the current rteval XML-RPC and parser installation
---
-    CREATE TABLE rteval_info (
-       key    varchar(32) NOT NULL,
-       value  TEXT NOT NULL,
-       rtiid  SERIAL,
-       PRIMARY KEY(rtiid)
-    );
-    GRANT SELECT ON rteval_info TO rtevparser;
-    INSERT INTO rteval_info (key, value) VALUES ('sql_schema_ver','1.5');
-
--- Enable plpgsql.  It is expected that this PL/pgSQL is available.
-    CREATE LANGUAGE 'plpgsql';
-
--- FUNCTION: trgfnc_submqueue_notify
--- Trigger function which is called on INSERT queries to the submissionqueue table.
--- It will send a NOTIFY rteval_submq on INSERTs.
---
-    CREATE FUNCTION trgfnc_submqueue_notify() RETURNS TRIGGER
-    AS $BODY$
-      DECLARE
-      BEGIN
-        NOTIFY rteval_submq;
-        RETURN NEW;
-      END
-    $BODY$ LANGUAGE 'plpgsql';
-
-    -- The user(s) which are allowed to do INSERT on the submissionqueue
-    -- must also be allowed to call this trigger function.
-    GRANT EXECUTE ON FUNCTION trgfnc_submqueue_notify() TO rtevxmlrpc;
-
--- TABLE: submissionqueue
--- All XML-RPC clients registers their submissions into this table.  Another parser thread
--- will pickup the records where parsestart IS NULL.
---
-    CREATE TABLE submissionqueue (
-           clientid   varchar(128) NOT NULL,
-           filename   VARCHAR(1024) NOT NULL,
-           status     INTEGER DEFAULT '0',
-           received   TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT NOW(),
-           parsestart TIMESTAMP WITH TIME ZONE,
-           parseend   TIMESTAMP WITH TIME ZONE,
-           submid     SERIAL,
-           PRIMARY KEY(submid)
-    ) WITH OIDS;
-    CREATE INDEX submissionq_status ON submissionqueue(status);
-
-    CREATE TRIGGER trg_submissionqueue AFTER INSERT
-           ON submissionqueue FOR EACH STATEMENT
-	   EXECUTE PROCEDURE trgfnc_submqueue_notify();
-
-    GRANT SELECT, INSERT ON submissionqueue TO rtevxmlrpc;
-    GRANT USAGE ON submissionqueue_submid_seq TO rtevxmlrpc;
-    GRANT SELECT, UPDATE ON submissionqueue TO rtevparser;
-
--- TABLE: systems
--- Overview table over all systems which have sent reports
--- The dmidata column will keep the complete DMIdata available
--- for further information about the system.
---
-    CREATE TABLE systems (
-        syskey        SERIAL NOT NULL,
-        sysid         VARCHAR(64) NOT NULL,
-        dmidata       xml NOT NULL,
-        PRIMARY KEY(syskey)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON systems TO rtevparser;
-    GRANT USAGE ON systems_syskey_seq TO rtevparser;
-
--- TABLE: systems_hostname
--- This table is used to track the hostnames and IP addresses
--- a registered system have used over time
---
-   CREATE TABLE systems_hostname (
-        syskey        INTEGER REFERENCES systems(syskey) NOT NULL,
-        hostname      VARCHAR(256) NOT NULL,
-        ipaddr        cidr
-    ) WITH OIDS;
-    CREATE INDEX systems_hostname_syskey ON systems_hostname(syskey);
-    CREATE INDEX systems_hostname_hostname ON systems_hostname(hostname);
-    CREATE INDEX systems_hostname_ipaddr ON systems_hostname(ipaddr);
-
-    GRANT SELECT, INSERT ON systems_hostname TO rtevparser;
-
-
--- TABLE: rtevalruns
--- Overview over all rteval runs, when they were run and how long they ran.
---
-    CREATE TABLE rtevalruns (
-        rterid          SERIAL NOT NULL, -- RTEval Run Id
-        submid          INTEGER REFERENCES submissionqueue(submid) NOT NULL,
-        syskey          INTEGER REFERENCES systems(syskey) NOT NULL,
-        kernel_ver      VARCHAR(32) NOT NULL,
-        kernel_rt       BOOLEAN NOT NULL,
-        arch            VARCHAR(12) NOT NULL,
-	distro		VARCHAR(64),
-        run_start       TIMESTAMP WITH TIME ZONE NOT NULL,
-        run_duration    INTEGER NOT NULL,
-        load_avg        REAL NOT NULL,
-        version         VARCHAR(4), -- Version of rteval
-        report_filename TEXT,
-        PRIMARY KEY(rterid)
-    ) WITH OIDS;
-
-    GRANT SELECT,INSERT ON rtevalruns TO rtevparser;
-    GRANT SELECT ON rtevalruns TO rtevxmlrpc;
-    GRANT USAGE ON rtevalruns_rterid_seq TO rtevparser;
-
--- TABLE rtevalruns_details
--- More specific information on the rteval run.  The data is stored
--- in XML for flexibility
---
--- Tags being saved here includes: /rteval/clocksource, /rteval/hardware,
--- /rteval/loads and /rteval/cyclictest/command_line
---
-    CREATE TABLE rtevalruns_details (
-        rterid          INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        annotation      TEXT,
-        num_cpu_cores   INTEGER,
-        num_cpu_sockets INTEGER,
-        cpu_core_spread INTEGER[],
-        numa_nodes      INTEGER,
-        xmldata         xml NOT NULL,
-        PRIMARY KEY(rterid)
-    );
-    GRANT INSERT ON rtevalruns_details TO rtevparser;
-
--- TABLE: cyclic_statistics
--- This table keeps statistics overview over a particular rteval run
---
-    CREATE TABLE cyclic_statistics (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        coreid        INTEGER, -- NULL=system
-        priority      INTEGER, -- NULL=system
-        num_samples   BIGINT NOT NULL,
-        lat_min       REAL NOT NULL,
-        lat_max       REAL NOT NULL,
-        lat_mean      REAL NOT NULL,
-        mode          REAL NOT NULL,
-        range         REAL NOT NULL,
-        median        REAL NOT NULL,
-        stddev        REAL NOT NULL,
-	mean_abs_dev  REAL NOT NULL,
-	variance      REAL NOT NULL,
-        cstid         SERIAL NOT NULL, -- unique record ID
-        PRIMARY KEY(cstid)
-    ) WITH OIDS;
-    CREATE INDEX cyclic_statistics_rterid ON cyclic_statistics(rterid);
-
-    GRANT INSERT ON cyclic_statistics TO rtevparser;
-    GRANT USAGE ON cyclic_statistics_cstid_seq TO rtevparser;
-
--- TABLE: cyclic_histogram
--- This table keeps the raw histogram data for each rteval run being
--- reported.
---
-    CREATE TABLE cyclic_histogram (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        core          INTEGER, -- NULL=system
-        index         INTEGER NOT NULL,
-        value         BIGINT NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_histogram_rterid ON cyclic_histogram(rterid);
-
-    GRANT INSERT ON cyclic_histogram TO rtevparser;
-
--- TABLE: cyclic_rawdata
--- This table keeps the raw data for each rteval run being reported.
--- Due to that it will be an enormous amount of data, we avoid using
--- OID on this table.
---
-    CREATE TABLE cyclic_rawdata (
-        rterid        INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-        cpu_num       INTEGER NOT NULL,
-        sampleseq     INTEGER NOT NULL,
-        latency       REAL NOT NULL
-    ) WITHOUT OIDS;
-    CREATE INDEX cyclic_rawdata_rterid ON cyclic_rawdata(rterid);
-
-    GRANT INSERT ON cyclic_rawdata TO rtevparser;
-
--- TABLE: hwlatdetect_summary
--- Tracks hwlatdetect results for a particular hardware
---
-   CREATE TABLE hwlatdetect_summary (
-       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-       duration       INTEGER NOT NULL,
-       threshold      INTEGER NOT NULL,
-       timewindow     INTEGER NOT NULL,
-       width          INTEGER NOT NULL,
-       samplecount    INTEGER NOT NULL,
-       hwlat_min      REAL NOT NULL,
-       hwlat_avg      REAL NOT NULL,
-       hwlat_max      REAL NOT NULL
-   ) WITHOUT OIDS;
-   GRANT SELECT, INSERT ON hwlatdetect_summary TO rtevparser;
-
--- TABLE: hwlatdetect_samples
--- Contains the hwlatdetect sample records from a particular run
---
-   CREATE TABLE hwlatdetect_samples (
-       rterid         INTEGER REFERENCES rtevalruns(rterid) NOT NULL,
-       timestamp      NUMERIC(20,10) NOT NULL,
-       latency        REAL NOT NULL
-   ) WITHOUT OIDS;
-   GRANT SELECT, INSERT ON hwlatdetect_samples TO rtevparser;
-
--- TABLE: notes
--- This table is purely to make notes, connected to different
--- records in the database
---
-    CREATE TABLE notes (
-        ntid          SERIAL NOT NULL,
-        reftbl        CHAR NOT NULL,    -- S=systems, R=rtevalruns
-        refid         INTEGER NOT NULL, -- reference id, to the corresponding table
-        notes         TEXT NOT NULL,
-        createdby     VARCHAR(48),
-        created       TIMESTAMP WITH TIME ZONE NOT NULL DEFAULT CURRENT_TIMESTAMP,
-        PRIMARY KEY(ntid)
-    ) WITH OIDS;
-    CREATE INDEX notes_refid ON notes(reftbl,refid);
diff --git a/server/testclient.py b/server/testclient.py
deleted file mode 100644
index dc9745b..0000000
--- a/server/testclient.py
+++ /dev/null
@@ -1,37 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   testclient.py
-#   XML-RPC test client for testing the supported XML-RPC API 
-#   in the rteval server.
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import sys
-import libxml2
-import io
-
-sys.path.append('../rteval')
-import rtevalclient
-
-print("** Creating doc")
-d = libxml2.newDoc("1.0")
-n = libxml2.newNode('TestNode1')
-d.setRootElement(n)
-n2 = n.newTextChild(None, 'TestNode2','Just a little test')
-n2.newProp('test','true')
-
-for i in range(1,5):
-    n2 = n.newTextChild(None, 'TestNode3', 'Test line %i' %i)
-
-print("** Doc to be sent")
-d.saveFormatFileEnc('-','UTF-8', 1)
-
-
-print("** Testing API")
-client = rtevalclient.rtevalclient("http://localhost:65432/rteval/API1/")
-
-print("** 1: Hello(): %s" % str(client.Hello()))
-status = client.SendReport(d)
-print("** 2: SendReport(xmlDoc): %s" % str(status))
-
diff --git a/server/testclient_sendreportfile b/server/testclient_sendreportfile
deleted file mode 100755
index 5d3ed74..0000000
--- a/server/testclient_sendreportfile
+++ /dev/null
@@ -1,36 +0,0 @@ 
-#!/usr/bin/python3 -tt
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   testclient_sendfile.py
-#   XML-RPC test client which just sends an XML file to the given rteval server
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import sys
-import libxml2
-from argparse import ArgumentParser
-
-sys.path.append('../rteval')
-import rtevalclient
-
-if __name__ == '__main__':
-    parser = ArgumentParser(version="%prog v0.1")
-
-    parser.add_argument("-r", "--report", action="store", dest="report", default="summary.xml",
-                      help="Which XML report to send to the XML-RPC server  (default: %default)",
-                      metavar="FILE")
-    parser.add_argument("-X", "--xmlrpc-submit", dest="xmlrpchost", default="localhost:65432",
-                      help="Hostname to the XML-RPC server to send the data (default: %default)",
-                      metavar="HOST[:PORT]")
-
-    opts = parser.parse_args()
-
-    d = libxml2.parseFile(opts.report)
-
-    client = rtevalclient.rtevalclient("http://%s/rteval/API1/" % opts.xmlrpchost)
-
-    status = client.SendReport(d)
-    print "SendReport(xmlDoc): %s" % status
-else:
-    raise Exception, "This is a standalone program, not a module to be imported"
diff --git a/server/unittest.py b/server/unittest.py
deleted file mode 100644
index 73cee9d..0000000
--- a/server/unittest.py
+++ /dev/null
@@ -1,91 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-import sys, threading, time, signal, libxml2
-import argparse
-from rteval_testserver import RTevald
-from Logger import Logger
-
-sys.path.insert(0,'..')
-sys.path.insert(0,'../rteval')
-sys.path.insert(0,'rteval')
-import rtevalclient
-
-class ServerThread(threading.Thread):
-    def __init__(self, port):
-        threading.Thread.__init__(self)
-        self.port = port
-        self.log = Logger('unit-test-server.log','rteval-xmlrpc-testsrv')
-
-        parser = argparse.ArgumentParser()
-        parser.add_argument("-L", "--listen", action="store", dest="listen", default="127.0.0.1",
-                          help="Which interface to listen to [default: %default]", metavar="IPADDR")
-        parser.add_argument("-P", "--port", action="store", type="int", dest="port", default=self.port,
-                          help="Which port to listen to [default: %default]",  metavar="PORT")
-
-        (options, args) = parser.parse_args()
-
-        self.child = RTevald(options, self.log)
-
-    def run(self):
-        self.child.StartServer()
-
-    def stop(self):
-        self.child.StopServer()
-
-    def sigcatch(self, signum, frame):
-        print("Shutting down")
-        self.stop()
-
-
-class ClientTest(object):
-    def __init__(self, port):
-        self.client = rtevalclient.rtevalclient("http://localhost:%s/rteval/API1/" % port)
-
-    def __prepare_data(self):
-        d = libxml2.newDoc("1.0")
-        n = libxml2.newNode('TestNode1')
-        d.setRootElement(n)
-        n2 = n.newTextChild(None, 'TestNode2','Just a little test')
-        n2.newProp('test','true')
-        for i in range(1,5):
-            n2 = n.newTextChild(None, 'TestNode3', 'Test line %i' %i)
-        self.testdoc = d
-
-    def RunTest(self):
-        try:
-            print("** Creating XML test document")
-            self.__prepare_data()
-            self.testdoc.saveFormatFileEnc('-','UTF-8', 1)
-
-            print("** Client test [1]: Hello(): %s" % str(self.client.Hello()))
-            status = self.client.SendReport(self.testdoc)
-            print("** Client test [2]; SendReport(xmlDoc): %s" % str(status))
-        except Exception as e:
-            raise Exception("XML-RPC client test failed: %s" % str(e))
-
-
-def unit_test(rootdir):
-    ret = 1
-    try:
-        # Prepare server and client objects
-        srvthread = ServerThread('65432')
-        clienttest = ClientTest('65432')
-        signal.signal(signal.SIGINT, srvthread.sigcatch)
-
-        # Start a local XML-RPC test server
-        srvthread.start()
-        print("** Waiting 2 seconds for server to settle")
-        time.sleep(2)
-
-        # Start the client test
-        print("** Starting client tests")
-        clienttest.RunTest()
-        ret = 0
-    except Exception as e:
-        print("** EXCEPTION: %s" % str(e))
-    finally:
-        # Stop the local XML-RPC test server
-        srvthread.stop()
-    return ret
-
-if __name__ == "__main__":
-    sys.exit(unit_test('..'))
diff --git a/server/xmlrpc_API1.py b/server/xmlrpc_API1.py
deleted file mode 100644
index e2ad4ec..0000000
--- a/server/xmlrpc_API1.py
+++ /dev/null
@@ -1,100 +0,0 @@ 
-# SPDX-License-Identifier: GPL-2.0-or-later
-#
-#   xmlrpc_API1.py
-#   XML-RPC functions supported by the API1 version for the rteval server
-#
-#   Copyright 2009 - 2013   David Sommerseth <davids@redhat.com>
-#
-
-import os
-import bz2
-import base64
-import libxml2
-import string
-import platform
-import rtevaldb
-
-
-class XMLRPC_API1():
-    def __init__(self, config=None, debug=False, nodbaction=False):
-        # Some defaults
-        self.apiversion = 1
-        self.fnametrans = string.maketrans("/\\.", "::_") # replace path delimiters in filenames
-        self.debug = debug
-        self.nodbaction = nodbaction
-        self.config = config
-
-
-    def __mkdatadir(self, dirpath):
-        startdir = os.getcwd()
-        if dirpath[0] == '/':
-            os.chdir('/')
-        for dir in dirpath.split("/"):
-            if dir is '':
-                continue
-            if not os.path.exists(dir):
-                os.mkdir(dir, 0o700)
-            os.chdir(dir)
-        os.chdir(startdir)
-
-
-    def __getfilename(self, dir, fname, ext, comp):
-        idx = 0
-        if comp:
-            filename = "%s/%s/%s%s.bz2" % (self.config.datadir, dir, fname.translate(self.fnametrans), ext)
-        else:
-            filename = "%s/%s/%s%s" % (self.config.datadir, dir, fname.translate(self.fnametrans), ext)
-
-        while 1:
-            if not os.path.exists(filename):
-                return filename
-            idx += 1
-            if comp:
-                filename = "%s/%s/%s-{%i}.bz2" % (self.config.datadir, dir,
-                                                  fname.translate(self.fnametrans), idx)
-            else:
-                filename = "%s/%s/%s-{%i}" % (self.config.datadir, dir,
-                                              fname.translate(self.fnametrans), idx)
-
-
-    def Dispatch(self, method, params):
-        # Call the method requested
-        # FIXME: Improve checking for valid methods
-        func = getattr(self, method)
-        return func(*params)
-
-
-    def _dispatch(self, method, params):
-        "Wrapper method for Dispatch(), used by xmlrpclib in a local test server. Only used for testing."
-        return self.Dispatch(method, params)
-
-
-    def SendReport(self, clientid, xmlbzb64):
-        decompr = bz2.BZ2Decompressor()
-        xmldoc = libxml2.parseDoc(decompr.decompress(base64.b64decode(xmlbzb64)))
-
-        # Save a copy of the report on the file system
-        # Make sure we have a directory to write files into
-        self.__mkdatadir(os.path.join(self.config.datadir, 'queue'))
-        fname = self.__getfilename('queue/', ('%s' % clientid), '.xml', False)
-        xmldoc.saveFormatFileEnc(fname,'UTF-8',1)
-        if self.debug:
-            print("Copy of report: %s" % fname)
-
-        # Register the submission and put it in a parse queue
-        rterid = rtevaldb.register_submission(self.config, clientid, fname,
-                                                        debug=self.debug, noaction=self.nodbaction)
-        if self.nodbaction:
-            rterid = 999999999 # Fake ID when no database registration is done
-
-        return rterid
-
-
-    def Hello(self, clientid):
-        return {"greeting": "Hello %s" % clientid,
-                "server": platform.node(),
-                "APIversion": self.apiversion}
-
-
-    def DatabaseStatus(self):
-        return rtevaldb.database_status(self.config)
diff --git a/unit-tests/unittest.py b/unit-tests/unittest.py
index a60af16..00811d7 100644
--- a/unit-tests/unittest.py
+++ b/unit-tests/unittest.py
@@ -113,7 +113,6 @@  if __name__ == '__main__':
             ('rteval/sysinfo','dmi'),
             ('rteval','rtevalConfig'),
             ('rteval','xmlout'),
-            ('server','unittest')
             ))
     # Run all tests
     tests.RunTests()