diff mbox series

[22/23] uas: switch to using ->device_configure to configure queue limits

Message ID 20240324235448.2039074-23-hch@lst.de
State Superseded
Headers show
Series [01/23] block: don't reject too large max_user_setors in blk_validate_limits | expand

Commit Message

Christoph Hellwig March 24, 2024, 11:54 p.m. UTC
Switch to the ->device_configure method instead of ->slave_alloc
and update the block limits on the passed in queue_limits instead
of using the per-limit accessors.

Note that uas was the only driver setting these size limits from
->slave_alloc and not ->slave_configure and this makes it match
everyone else.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/usb/storage/uas.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 0668182e1c469c..738c183ccada8d 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -823,19 +823,19 @@  static int uas_slave_alloc(struct scsi_device *sdev)
 		(struct uas_dev_info *)sdev->host->hostdata;
 
 	sdev->hostdata = devinfo;
-
-	if (devinfo->flags & US_FL_MAX_SECTORS_64)
-		blk_queue_max_hw_sectors(sdev->request_queue, 64);
-	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
-		blk_queue_max_hw_sectors(sdev->request_queue, 240);
-
 	return 0;
 }
 
-static int uas_slave_configure(struct scsi_device *sdev)
+static int uas_device_configure(struct scsi_device *sdev,
+		struct queue_limits *lim)
 {
 	struct uas_dev_info *devinfo = sdev->hostdata;
 
+	if (devinfo->flags & US_FL_MAX_SECTORS_64)
+		lim->max_hw_sectors = 64;
+	else if (devinfo->flags & US_FL_MAX_SECTORS_240)
+		lim->max_hw_sectors = 240;
+
 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
 		sdev->no_report_opcodes = 1;
 
@@ -900,7 +900,7 @@  static const struct scsi_host_template uas_host_template = {
 	.queuecommand = uas_queuecommand,
 	.target_alloc = uas_target_alloc,
 	.slave_alloc = uas_slave_alloc,
-	.slave_configure = uas_slave_configure,
+	.device_configure = uas_device_configure,
 	.eh_abort_handler = uas_eh_abort_handler,
 	.eh_device_reset_handler = uas_eh_device_reset_handler,
 	.this_id = -1,