diff mbox series

[v2,2/2] ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name

Message ID 20240409-qcom-pmic-gpio-hog-v2-2-5ff812d2baed@z3ntu.xyz
State New
Headers show
Series Allow gpio-hog nodes in qcom,pmic-gpio bindings (& dt fixup) | expand

Commit Message

Luca Weiss April 9, 2024, 6:36 p.m. UTC 
Follow the gpio-hog bindings and use otg-hog as node name.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Krzysztof Kozlowski April 10, 2024, 6:15 a.m. UTC | #1 
On 09/04/2024 20:36, Luca Weiss wrote:
> Follow the gpio-hog bindings and use otg-hog as node name.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
>  arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 4aaae8537a3f..06549051be50 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -328,7 +328,7 @@  wlan_regulator_pin: wl-reg-active-state {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	otg {
+	otg-hog {
 		gpio-hog;
 		gpios = <35 GPIO_ACTIVE_HIGH>;
 		output-high;