diff mbox series

[23/23] block: remove now unused queue limits helpers

Message ID 20240409143748.980206-24-hch@lst.de
State New
Headers show
Series [01/23] block: add a helper to cancel atomic queue limit updates | expand

Commit Message

Christoph Hellwig April 9, 2024, 2:37 p.m. UTC
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 block/blk-settings.c           | 245 ---------------------------------
 drivers/s390/block/dasd_eckd.c |   6 +-
 include/linux/blkdev.h         |  13 --
 include/linux/mmc/host.h       |   4 +-
 4 files changed, 5 insertions(+), 263 deletions(-)
diff mbox series

Patch

diff --git a/block/blk-settings.c b/block/blk-settings.c
index 3c7d8d638ab59d..292aadf8d80762 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -284,72 +284,6 @@  int queue_limits_set(struct request_queue *q, struct queue_limits *lim)
 }
 EXPORT_SYMBOL_GPL(queue_limits_set);
 
-/**
- * blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q: the request queue for the device
- * @bounce: bounce limit to enforce
- *
- * Description:
- *    Force bouncing for ISA DMA ranges or highmem.
- *
- *    DEPRECATED, don't use in new code.
- **/
-void blk_queue_bounce_limit(struct request_queue *q, enum blk_bounce bounce)
-{
-	q->limits.bounce = bounce;
-}
-EXPORT_SYMBOL(blk_queue_bounce_limit);
-
-/**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q:  the request queue for the device
- * @max_hw_sectors:  max hardware sectors in the usual 512b unit
- *
- * Description:
- *    Enables a low level driver to set a hard upper limit,
- *    max_hw_sectors, on the size of requests.  max_hw_sectors is set by
- *    the device driver based upon the capabilities of the I/O
- *    controller.
- *
- *    max_dev_sectors is a hard limit imposed by the storage device for
- *    READ/WRITE requests. It is set by the disk driver.
- *
- *    max_sectors is a soft limit imposed by the block layer for
- *    filesystem type requests.  This value can be overridden on a
- *    per-device basis in /sys/block/<device>/queue/max_sectors_kb.
- *    The soft limit can not exceed max_hw_sectors.
- **/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
-{
-	struct queue_limits *limits = &q->limits;
-	unsigned int max_sectors;
-
-	if ((max_hw_sectors << 9) < PAGE_SIZE) {
-		max_hw_sectors = 1 << (PAGE_SHIFT - 9);
-		pr_info("%s: set to minimum %u\n", __func__, max_hw_sectors);
-	}
-
-	max_hw_sectors = round_down(max_hw_sectors,
-				    limits->logical_block_size >> SECTOR_SHIFT);
-	limits->max_hw_sectors = max_hw_sectors;
-
-	max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors);
-
-	if (limits->max_user_sectors)
-		max_sectors = min(max_sectors, limits->max_user_sectors);
-	else
-		max_sectors = min(max_sectors, BLK_DEF_MAX_SECTORS_CAP);
-
-	max_sectors = round_down(max_sectors,
-				 limits->logical_block_size >> SECTOR_SHIFT);
-	limits->max_sectors = max_sectors;
-
-	if (!q->disk)
-		return;
-	q->disk->bdi->io_pages = max_sectors >> (PAGE_SHIFT - 9);
-}
-EXPORT_SYMBOL(blk_queue_max_hw_sectors);
-
 /**
  * blk_queue_chunk_sectors - set size of the chunk for this queue
  * @q:  the request queue for the device
@@ -436,65 +370,6 @@  void blk_queue_max_zone_append_sectors(struct request_queue *q,
 }
 EXPORT_SYMBOL_GPL(blk_queue_max_zone_append_sectors);
 
-/**
- * blk_queue_max_segments - set max hw segments for a request for this queue
- * @q:  the request queue for the device
- * @max_segments:  max number of segments
- *
- * Description:
- *    Enables a low level driver to set an upper limit on the number of
- *    hw data segments in a request.
- **/
-void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments)
-{
-	if (!max_segments) {
-		max_segments = 1;
-		pr_info("%s: set to minimum %u\n", __func__, max_segments);
-	}
-
-	q->limits.max_segments = max_segments;
-}
-EXPORT_SYMBOL(blk_queue_max_segments);
-
-/**
- * blk_queue_max_discard_segments - set max segments for discard requests
- * @q:  the request queue for the device
- * @max_segments:  max number of segments
- *
- * Description:
- *    Enables a low level driver to set an upper limit on the number of
- *    segments in a discard request.
- **/
-void blk_queue_max_discard_segments(struct request_queue *q,
-		unsigned short max_segments)
-{
-	q->limits.max_discard_segments = max_segments;
-}
-EXPORT_SYMBOL_GPL(blk_queue_max_discard_segments);
-
-/**
- * blk_queue_max_segment_size - set max segment size for blk_rq_map_sg
- * @q:  the request queue for the device
- * @max_size:  max size of segment in bytes
- *
- * Description:
- *    Enables a low level driver to set an upper limit on the size of a
- *    coalesced segment
- **/
-void blk_queue_max_segment_size(struct request_queue *q, unsigned int max_size)
-{
-	if (max_size < PAGE_SIZE) {
-		max_size = PAGE_SIZE;
-		pr_info("%s: set to minimum %u\n", __func__, max_size);
-	}
-
-	/* see blk_queue_virt_boundary() for the explanation */
-	WARN_ON_ONCE(q->limits.virt_boundary_mask);
-
-	q->limits.max_segment_size = max_size;
-}
-EXPORT_SYMBOL(blk_queue_max_segment_size);
-
 /**
  * blk_queue_logical_block_size - set logical block size for the queue
  * @q:  the request queue for the device
@@ -661,29 +536,6 @@  void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt)
 }
 EXPORT_SYMBOL(blk_limits_io_opt);
 
-/**
- * blk_queue_io_opt - set optimal request size for the queue
- * @q:	the request queue for the device
- * @opt:  optimal request size in bytes
- *
- * Description:
- *   Storage devices may report an optimal I/O size, which is the
- *   device's preferred unit for sustained I/O.  This is rarely reported
- *   for disk drives.  For RAID arrays it is usually the stripe width or
- *   the internal track size.  A properly aligned multiple of
- *   optimal_io_size is the preferred request size for workloads where
- *   sustained throughput is desired.
- */
-void blk_queue_io_opt(struct request_queue *q, unsigned int opt)
-{
-	blk_limits_io_opt(&q->limits, opt);
-	if (!q->disk)
-		return;
-	q->disk->bdi->ra_pages =
-		max(queue_io_opt(q) * 2 / PAGE_SIZE, VM_READAHEAD_PAGES);
-}
-EXPORT_SYMBOL(blk_queue_io_opt);
-
 static int queue_limit_alignment_offset(const struct queue_limits *lim,
 		sector_t sector)
 {
@@ -933,81 +785,6 @@  void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask)
 }
 EXPORT_SYMBOL(blk_queue_update_dma_pad);
 
-/**
- * blk_queue_segment_boundary - set boundary rules for segment merging
- * @q:  the request queue for the device
- * @mask:  the memory boundary mask
- **/
-void blk_queue_segment_boundary(struct request_queue *q, unsigned long mask)
-{
-	if (mask < PAGE_SIZE - 1) {
-		mask = PAGE_SIZE - 1;
-		pr_info("%s: set to minimum %lx\n", __func__, mask);
-	}
-
-	q->limits.seg_boundary_mask = mask;
-}
-EXPORT_SYMBOL(blk_queue_segment_boundary);
-
-/**
- * blk_queue_virt_boundary - set boundary rules for bio merging
- * @q:  the request queue for the device
- * @mask:  the memory boundary mask
- **/
-void blk_queue_virt_boundary(struct request_queue *q, unsigned long mask)
-{
-	q->limits.virt_boundary_mask = mask;
-
-	/*
-	 * Devices that require a virtual boundary do not support scatter/gather
-	 * I/O natively, but instead require a descriptor list entry for each
-	 * page (which might not be idential to the Linux PAGE_SIZE).  Because
-	 * of that they are not limited by our notion of "segment size".
-	 */
-	if (mask)
-		q->limits.max_segment_size = UINT_MAX;
-}
-EXPORT_SYMBOL(blk_queue_virt_boundary);
-
-/**
- * blk_queue_dma_alignment - set dma length and memory alignment
- * @q:     the request queue for the device
- * @mask:  alignment mask
- *
- * description:
- *    set required memory and length alignment for direct dma transactions.
- *    this is used when building direct io requests for the queue.
- *
- **/
-void blk_queue_dma_alignment(struct request_queue *q, int mask)
-{
-	q->limits.dma_alignment = mask;
-}
-EXPORT_SYMBOL(blk_queue_dma_alignment);
-
-/**
- * blk_queue_update_dma_alignment - update dma length and memory alignment
- * @q:     the request queue for the device
- * @mask:  alignment mask
- *
- * description:
- *    update required memory and length alignment for direct dma transactions.
- *    If the requested alignment is larger than the current alignment, then
- *    the current queue alignment is updated to the new value, otherwise it
- *    is left alone.  The design of this is to allow multiple objects
- *    (driver, device, transport etc) to set their respective
- *    alignments without having them interfere.
- *
- **/
-void blk_queue_update_dma_alignment(struct request_queue *q, int mask)
-{
-	BUG_ON(mask > PAGE_SIZE);
-
-	if (mask > q->limits.dma_alignment)
-		q->limits.dma_alignment = mask;
-}
-EXPORT_SYMBOL(blk_queue_update_dma_alignment);
-
 /**
  * blk_set_queue_depth - tell the block layer about the device queue depth
  * @q:		the request queue for the device
@@ -1061,28 +838,6 @@  void blk_queue_required_elevator_features(struct request_queue *q,
 }
 EXPORT_SYMBOL_GPL(blk_queue_required_elevator_features);
 
-/**
- * blk_queue_can_use_dma_map_merging - configure queue for merging segments.
- * @q:		the request queue for the device
- * @dev:	the device pointer for dma
- *
- * Tell the block layer about merging the segments by dma map of @q.
- */
-bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
-				       struct device *dev)
-{
-	unsigned long boundary = dma_get_merge_boundary(dev);
-
-	if (!boundary)
-		return false;
-
-	/* No need to update max_segment_size. see blk_queue_virt_boundary() */
-	blk_queue_virt_boundary(q, boundary);
-
-	return true;
-}
-EXPORT_SYMBOL_GPL(blk_queue_can_use_dma_map_merging);
-
 /**
  * disk_set_zoned - inidicate a zoned device
  * @disk:	gendisk to configure
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 180a008d38eaaf..2f16f543079b4f 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -4561,9 +4561,9 @@  static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
 	len_to_track_end = 0;
 	/*
 	 * A tidaw can address 4k of memory, but must not cross page boundaries
-	 * We can let the block layer handle this by setting
-	 * blk_queue_segment_boundary to page boundaries and
-	 * blk_max_segment_size to page size when setting up the request queue.
+	 * We can let the block layer handle this by setting seg_boundary_mask
+	 * to page boundaries and max_segment_size to page size when setting up
+	 * the request queue.
 	 * For write requests, a TIDAW must not cross track boundaries, because
 	 * we have to set the CBC flag on the last tidaw for each track.
 	 */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ded7f66dc4b964..e3c7082efa396e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -908,15 +908,9 @@  static inline void queue_limits_cancel_update(struct request_queue *q)
 /*
  * Access functions for manipulating queue properties
  */
-void blk_queue_bounce_limit(struct request_queue *q, enum blk_bounce limit);
-extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
 extern void blk_queue_chunk_sectors(struct request_queue *, unsigned int);
-extern void blk_queue_max_segments(struct request_queue *, unsigned short);
-extern void blk_queue_max_discard_segments(struct request_queue *,
-		unsigned short);
 void blk_queue_max_secure_erase_sectors(struct request_queue *q,
 		unsigned int max_sectors);
-extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
 extern void blk_queue_max_discard_sectors(struct request_queue *q,
 		unsigned int max_discard_sectors);
 extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
@@ -933,7 +927,6 @@  void disk_update_readahead(struct gendisk *disk);
 extern void blk_limits_io_min(struct queue_limits *limits, unsigned int min);
 extern void blk_queue_io_min(struct request_queue *q, unsigned int min);
 extern void blk_limits_io_opt(struct queue_limits *limits, unsigned int opt);
-extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt);
 extern void blk_set_queue_depth(struct request_queue *q, unsigned int depth);
 extern void blk_set_stacking_limits(struct queue_limits *lim);
 extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
@@ -941,10 +934,6 @@  extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 void queue_limits_stack_bdev(struct queue_limits *t, struct block_device *bdev,
 		sector_t offset, const char *pfx);
 extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int);
-extern void blk_queue_segment_boundary(struct request_queue *, unsigned long);
-extern void blk_queue_virt_boundary(struct request_queue *, unsigned long);
-extern void blk_queue_dma_alignment(struct request_queue *, int);
-extern void blk_queue_update_dma_alignment(struct request_queue *, int);
 extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
 extern void blk_queue_write_cache(struct request_queue *q, bool enabled, bool fua);
 
@@ -961,8 +950,6 @@  void disk_set_independent_access_ranges(struct gendisk *disk,
 
 extern void blk_queue_required_elevator_features(struct request_queue *q,
 						 unsigned int features);
-extern bool blk_queue_can_use_dma_map_merging(struct request_queue *q,
-					      struct device *dev);
 
 bool __must_check blk_get_queue(struct request_queue *);
 extern void blk_put_queue(struct request_queue *);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 5894bf912f7bdb..88c6a76042ee73 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -433,8 +433,8 @@  struct mmc_host {
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
 	/* host specific block data */
-	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
-	unsigned short		max_segs;	/* see blk_queue_max_segments */
+	unsigned int		max_seg_size;	/* lim->max_segment_size */
+	unsigned short		max_segs;	/* lim->max_segments */
 	unsigned short		unused;
 	unsigned int		max_req_size;	/* maximum number of bytes in one req */
 	unsigned int		max_blk_size;	/* maximum size of one mmc block */