diff mbox series

[12/18] i2c: qup: remove printout on handled timeouts

Message ID 20240410112418.6400-32-wsa+renesas@sang-engineering.com
State New
Headers show
Series i2c: remove printout on handled timeouts | expand

Commit Message

Wolfram Sang April 10, 2024, 11:24 a.m. UTC
I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-qup.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 598102d16677..c9b43a3c4bd3 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -793,10 +793,8 @@  static int qup_i2c_bam_schedule_desc(struct qup_i2c_dev *qup)
 		dma_async_issue_pending(qup->brx.dma);
 	}
 
-	if (!wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout)) {
-		dev_err(qup->dev, "normal trans timed out\n");
+	if (!wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout))
 		ret = -ETIMEDOUT;
-	}
 
 	if (ret || qup->bus_err || qup->qup_err) {
 		reinit_completion(&qup->xfer);