diff mbox series

[1/4] i2c: i801: Remove usage of I2C_CLASS_SPD

Message ID c54ba6b1-e062-4d82-b663-1060b12f14ab@gmail.com
State New
Headers show
Series i2c: Remove I2C_CLASS_SPD | expand

Commit Message

Heiner Kallweit April 15, 2024, 8:47 p.m. UTC
Only remaining client driver supporting I2C_CLASS_SPD is jc42. This
type of thermal sensor can be found on several DDR3/DDR4 modules.
i2c_register_spd() instantiates also such thermal sensor i2c devices.
Since 71b494e043d2 ("i2c: i801: Call i2c_register_spd for muxed child
segments") i2c_register_spd() is called also for the remaining use case,
systems with muxed SMBUS segments for SPD EEPROMs.
Therefore I2C_CLASS_SPD class-based instantiation isn't needed any longer
in this driver, so remove it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/i2c/busses/i2c-i801.c | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ab17e76e3..e577abc77 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -264,7 +264,6 @@  struct i801_mux_config {
 	char *gpio_chip;
 	unsigned values[3];
 	int n_values;
-	unsigned classes[3];
 	unsigned gpios[2];		/* Relative to gpio_chip->base */
 	int n_gpios;
 };
@@ -1315,7 +1314,6 @@  static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
 	.gpio_chip = "gpio_ich",
 	.values = { 0x02, 0x03 },
 	.n_values = 2,
-	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
 	.gpios = { 52, 53 },
 	.n_gpios = 2,
 };
@@ -1324,7 +1322,6 @@  static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
 	.gpio_chip = "gpio_ich",
 	.values = { 0x02, 0x03, 0x01 },
 	.n_values = 3,
-	.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
 	.gpios = { 52, 53 },
 	.n_gpios = 2,
 };
@@ -1434,7 +1431,6 @@  static void i801_add_mux(struct i801_priv *priv)
 	gpio_data.parent = priv->adapter.nr;
 	gpio_data.values = mux_config->values;
 	gpio_data.n_values = mux_config->n_values;
-	gpio_data.classes = mux_config->classes;
 	gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
 
 	/* Register GPIO descriptor lookup table */