diff mbox series

[v4,3/3] wifi: ath12k: report station mode signal strength

Message ID 20240419032122.7009-4-quic_lingbok@quicinc.com
State New
Headers show
Series wifi: ath12k: report station mode stats | expand

Commit Message

Lingbo Kong April 19, 2024, 3:21 a.m. UTC
Currently, the signal strength of "iw dev xxx station dump" always show an
invalid value.

This is because signal strength is only set in ath12k_mgmt_rx_event()
function, and not set for received data packet. So, change to get signal
from firmware and report to mac80211.

After that, "iw dev xxx station dump" show the correct signal strength.
Such as:

Station 00:03:7f:12:03:03 (on wlo1)
        inactive time:  36 ms
        rx bytes:       61571
        rx packets:     336
        tx bytes:       28204
        tx packets:     205
        tx retries:     49
        tx failed:      0
        beacon loss:    0
        beacon rx:      83
        rx drop misc:   66
        signal:         -24 dBm
        beacon signal avg:      -22 dBm

For WCN7850, the firmware supports db2dbm, so not need to add noise floor.
For QCN9274, the firmware not support db2dbm, so need to add noise floor.

This patch affects the station mode of WCN7850 and QCN9274.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.2.1-00201-QCAHKSWPL_SILICONZ-1

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
---
v4:
1.no change

v3:
1.change wmi_vdev_stats_event to wmi_vdev_stats_params 

v2:
1.change name according Naming conventions for structures

 drivers/net/wireless/ath/ath12k/core.h |   3 +
 drivers/net/wireless/ath/ath12k/mac.c  |  56 ++++++++++-
 drivers/net/wireless/ath/ath12k/wmi.c  | 130 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath12k/wmi.h  |  48 +++++++++
 4 files changed, 235 insertions(+), 2 deletions(-)

Comments

Kalle Valo April 25, 2024, 5:03 p.m. UTC | #1
Lingbo Kong <quic_lingbok@quicinc.com> writes:

> Currently, the signal strength of "iw dev xxx station dump" always show an
> invalid value.
>
> This is because signal strength is only set in ath12k_mgmt_rx_event()
> function, and not set for received data packet. So, change to get signal
> from firmware and report to mac80211.
>
> After that, "iw dev xxx station dump" show the correct signal strength.
> Such as:
>
> Station 00:03:7f:12:03:03 (on wlo1)
>         inactive time:  36 ms
>         rx bytes:       61571
>         rx packets:     336
>         tx bytes:       28204
>         tx packets:     205
>         tx retries:     49
>         tx failed:      0
>         beacon loss:    0
>         beacon rx:      83
>         rx drop misc:   66
>         signal:         -24 dBm
>         beacon signal avg:      -22 dBm
>
> For WCN7850, the firmware supports db2dbm, so not need to add noise floor.
> For QCN9274, the firmware not support db2dbm, so need to add noise floor.
>
> This patch affects the station mode of WCN7850 and QCN9274.
>
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.2.1-00201-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>

[...]

> +static int ath12k_mac_get_fw_stats(struct ath12k *ar, u32 pdev_id,
> +				   u32 vdev_id, u32 stats_id)
> +{
> +	struct ath12k_base *ab = ar->ab;
> +	int ret, left;
> +
> +	mutex_lock(&ar->conf_mutex);
> +
> +	if (ar->state != ATH12K_STATE_ON) {
> +		ret = -ENETDOWN;
> +		goto err_unlock;
> +	}
> +
> +	reinit_completion(&ar->fw_stats_complete);
> +
> +	ret = ath12k_wmi_send_stats_request_cmd(ar, stats_id, vdev_id, pdev_id);
> +
> +	if (ret) {
> +		ath12k_warn(ab, "failed to request fw stats: %d\n", ret);
> +		goto err_unlock;
> +	}
> +
> +	ath12k_dbg(ab, ATH12K_DBG_WMI,
> +		   "get fw stat pdev id %d vdev id %d stats id 0x%x\n",
> +		   pdev_id, vdev_id, stats_id);
> +
> +	left = wait_for_completion_timeout(&ar->fw_stats_complete, 1 * HZ);
> +
> +	if (!left)
> +		ath12k_warn(ab, "time out while waiting for get fw stats\n");
> +err_unlock:
> +
> +	mutex_unlock(&ar->conf_mutex);
> +	return ret;
> +}

Shouldn't we return an error if there's a timeout?

> @@ -8202,8 +8242,18 @@ static void ath12k_mac_op_sta_statistics(struct ieee80211_hw *hw,
>  	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
>  
>  	/* TODO: Use real NF instead of default one. */
> -	sinfo->signal = arsta->rssi_comb + ATH12K_DEFAULT_NOISE_FLOOR;
> -	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
> +	signal = arsta->rssi_comb;
> +
> +	if (!signal &&
> +	    arsta->arvif->vdev_type == WMI_VDEV_TYPE_STA &&
> +	    !(ath12k_mac_get_fw_stats(ar, ar->pdev->pdev_id, 0,
> +				      WMI_REQUEST_VDEV_STAT)))
> +		signal = arsta->rssi_beacon;
> +
> +	if (signal) {
> +		sinfo->signal = db2dbm ? signal : signal + ATH12K_DEFAULT_NOISE_FLOOR;

Can this be simplified to:

if (db2dbm)
        signal += ATH12K_DEFAULT_NOISE_FLOOR;

A lot more readable.
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/core.h b/drivers/net/wireless/ath/ath12k/core.h
index b2ddd1e6fb14..498da0af5e9f 100644
--- a/drivers/net/wireless/ath/ath12k/core.h
+++ b/drivers/net/wireless/ath/ath12k/core.h
@@ -450,6 +450,7 @@  struct ath12k_sta {
 	struct ath12k_wbm_tx_stats *wbm_tx_stats;
 	u32 bw_prev;
 	u32 peer_nss;
+	s8 rssi_beacon;
 };
 
 #define ATH12K_MIN_5G_FREQ 4150
@@ -633,6 +634,8 @@  struct ath12k {
 
 	u32 freq_low;
 	u32 freq_high;
+
+	struct completion fw_stats_complete;
 };
 
 struct ath12k_hw {
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index cd13fa48e97d..1d8543d5df4a 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -8170,12 +8170,52 @@  static int ath12k_mac_op_get_survey(struct ieee80211_hw *hw, int idx,
 	return 0;
 }
 
+static int ath12k_mac_get_fw_stats(struct ath12k *ar, u32 pdev_id,
+				   u32 vdev_id, u32 stats_id)
+{
+	struct ath12k_base *ab = ar->ab;
+	int ret, left;
+
+	mutex_lock(&ar->conf_mutex);
+
+	if (ar->state != ATH12K_STATE_ON) {
+		ret = -ENETDOWN;
+		goto err_unlock;
+	}
+
+	reinit_completion(&ar->fw_stats_complete);
+
+	ret = ath12k_wmi_send_stats_request_cmd(ar, stats_id, vdev_id, pdev_id);
+
+	if (ret) {
+		ath12k_warn(ab, "failed to request fw stats: %d\n", ret);
+		goto err_unlock;
+	}
+
+	ath12k_dbg(ab, ATH12K_DBG_WMI,
+		   "get fw stat pdev id %d vdev id %d stats id 0x%x\n",
+		   pdev_id, vdev_id, stats_id);
+
+	left = wait_for_completion_timeout(&ar->fw_stats_complete, 1 * HZ);
+
+	if (!left)
+		ath12k_warn(ab, "time out while waiting for get fw stats\n");
+err_unlock:
+
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
 static void ath12k_mac_op_sta_statistics(struct ieee80211_hw *hw,
 					 struct ieee80211_vif *vif,
 					 struct ieee80211_sta *sta,
 					 struct station_info *sinfo)
 {
 	struct ath12k_sta *arsta = ath12k_sta_to_arsta(sta);
+	struct ath12k *ar = arsta->arvif->ar;
+	s8 signal;
+	bool db2dbm = test_bit(WMI_TLV_SERVICE_HW_DB2DBM_CONVERSION_SUPPORT,
+			       ar->ab->wmi_ab.svc_map);
 
 	sinfo->rx_duration = arsta->rx_duration;
 	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
@@ -8202,8 +8242,18 @@  static void ath12k_mac_op_sta_statistics(struct ieee80211_hw *hw,
 	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
 
 	/* TODO: Use real NF instead of default one. */
-	sinfo->signal = arsta->rssi_comb + ATH12K_DEFAULT_NOISE_FLOOR;
-	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
+	signal = arsta->rssi_comb;
+
+	if (!signal &&
+	    arsta->arvif->vdev_type == WMI_VDEV_TYPE_STA &&
+	    !(ath12k_mac_get_fw_stats(ar, ar->pdev->pdev_id, 0,
+				      WMI_REQUEST_VDEV_STAT)))
+		signal = arsta->rssi_beacon;
+
+	if (signal) {
+		sinfo->signal = db2dbm ? signal : signal + ATH12K_DEFAULT_NOISE_FLOOR;
+		sinfo->filled |= BIT_ULL(NL80211_STA_INFO_SIGNAL);
+	}
 }
 
 static int ath12k_mac_op_cancel_remain_on_channel(struct ieee80211_hw *hw,
@@ -8895,6 +8945,8 @@  static int ath12k_mac_hw_register(struct ath12k_hw *ah)
 
 	ath12k_debugfs_register(ar);
 
+	init_completion(&ar->fw_stats_complete);
+
 	return 0;
 
 err_unregister_hw:
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index b4063c2c94be..2ca47037be44 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -25,6 +25,10 @@  struct ath12k_wmi_svc_ready_parse {
 	bool wmi_svc_bitmap_done;
 };
 
+struct wmi_tlv_fw_stats_parse {
+	const struct wmi_stats_event *ev;
+};
+
 struct ath12k_wmi_dma_ring_caps_parse {
 	struct ath12k_wmi_dma_ring_caps_params *dma_ring_caps;
 	u32 n_dma_ring_caps;
@@ -6461,8 +6465,101 @@  static void ath12k_peer_assoc_conf_event(struct ath12k_base *ab, struct sk_buff
 	rcu_read_unlock();
 }
 
+static int ath12k_wmi_tlv_fw_stats_data_parse(struct ath12k_base *ab,
+					      struct wmi_tlv_fw_stats_parse *parse,
+					      const void *ptr,
+					      u16 len)
+{
+	const struct wmi_stats_event *ev = parse->ev;
+	struct ath12k *ar;
+	struct ath12k_vif *arvif;
+	struct ieee80211_sta *sta;
+	struct ath12k_sta *arsta;
+	int i, ret = 0;
+	const void *data = ptr;
+
+	if (!ev) {
+		ath12k_warn(ab, "failed to fetch update stats ev");
+		return -EPROTO;
+	}
+
+	rcu_read_lock();
+
+	ar = ath12k_mac_get_ar_by_pdev_id(ab, le32_to_cpu(ev->pdev_id));
+	if (!ar) {
+		ath12k_warn(ab, "invalid pdev id %d in update stats event\n",
+			    le32_to_cpu(ev->pdev_id));
+		ret = -EPROTO;
+		goto exit;
+	}
+
+	for (i = 0; i < le32_to_cpu(ev->num_vdev_stats); i++) {
+		const struct wmi_vdev_stats_params *src;
+
+		src = data;
+		if (len < sizeof(*src)) {
+			ret = -EPROTO;
+			goto exit;
+		}
+
+		arvif = ath12k_mac_get_arvif(ar, le32_to_cpu(src->vdev_id));
+		if (arvif) {
+			sta = ieee80211_find_sta_by_ifaddr(ath12k_ar_to_hw(ar),
+							   arvif->bssid,
+							   NULL);
+			if (sta) {
+				arsta = ath12k_sta_to_arsta(sta);
+				arsta->rssi_beacon = le32_to_cpu(src->beacon_snr);
+				ath12k_dbg(ab, ATH12K_DBG_WMI,
+					   "wmi stats vdev id %d snr %d\n",
+					   src->vdev_id, src->beacon_snr);
+			} else {
+				ath12k_dbg(ab, ATH12K_DBG_WMI,
+					   "not found station bssid %pM for vdev stat\n",
+					   arvif->bssid);
+			}
+		}
+
+		data += sizeof(*src);
+		len -= sizeof(*src);
+	}
+
+	complete(&ar->fw_stats_complete);
+exit:
+	rcu_read_unlock();
+	return ret;
+}
+
+static int ath12k_wmi_tlv_fw_stats_parse(struct ath12k_base *ab,
+					 u16 tag, u16 len,
+					 const void *ptr, void *data)
+{
+	struct wmi_tlv_fw_stats_parse *parse = data;
+	int ret = 0;
+
+	switch (tag) {
+	case WMI_TAG_STATS_EVENT:
+		parse->ev = ptr;
+		break;
+	case WMI_TAG_ARRAY_BYTE:
+		ret = ath12k_wmi_tlv_fw_stats_data_parse(ab, parse, ptr, len);
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
 static void ath12k_update_stats_event(struct ath12k_base *ab, struct sk_buff *skb)
 {
+	int ret;
+	struct wmi_tlv_fw_stats_parse parse = {};
+
+	ret = ath12k_wmi_tlv_iter(ab, skb->data, skb->len,
+				  ath12k_wmi_tlv_fw_stats_parse,
+				  &parse);
+	if (ret)
+		ath12k_warn(ab, "failed to parse fw stats %d\n", ret);
 }
 
 /* PDEV_CTL_FAILSAFE_CHECK_EVENT is received from FW when the frequency scanned
@@ -7185,3 +7282,36 @@  void ath12k_wmi_detach(struct ath12k_base *ab)
 
 	ath12k_wmi_free_dbring_caps(ab);
 }
+
+int ath12k_wmi_send_stats_request_cmd(struct ath12k *ar, u32 stats_id,
+				      u32 vdev_id, u32 pdev_id)
+{
+	struct ath12k_wmi_pdev *wmi = ar->wmi;
+	struct wmi_request_stats_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath12k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_request_stats_cmd *)skb->data;
+	cmd->tlv_header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_REQUEST_STATS_CMD,
+						 sizeof(*cmd));
+
+	cmd->stats_id = cpu_to_le32(stats_id);
+	cmd->vdev_id = cpu_to_le32(vdev_id);
+	cmd->pdev_id = cpu_to_le32(pdev_id);
+
+	ret = ath12k_wmi_cmd_send(wmi, skb, WMI_REQUEST_STATS_CMDID);
+	if (ret) {
+		ath12k_warn(ar->ab, "failed to send WMI_REQUEST_STATS cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	ath12k_dbg(ar->ab, ATH12K_DBG_WMI,
+		   "WMI request stats 0x%x vdev id %d pdev id %d\n",
+		   stats_id, vdev_id, pdev_id);
+
+	return ret;
+}
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 203de8da62b1..b81475310c07 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -4831,6 +4831,52 @@  struct wmi_twt_disable_event {
 	__le32 status;
 } __packed;
 
+struct wmi_stats_event {
+	__le32 stats_id;
+	__le32 num_pdev_stats;
+	__le32 num_vdev_stats;
+	__le32 num_peer_stats;
+	__le32 num_bcnflt_stats;
+	__le32 num_chan_stats;
+	__le32 num_mib_stats;
+	__le32 pdev_id;
+	__le32 num_bcn_stats;
+	__le32 num_peer_extd_stats;
+	__le32 num_peer_extd2_stats;
+} __packed;
+
+enum wmi_stats_id {
+	WMI_REQUEST_VDEV_STAT	= BIT(3),
+};
+
+struct wmi_request_stats_cmd {
+	__le32 tlv_header;
+	__le32 stats_id;
+	__le32 vdev_id;
+	struct ath12k_wmi_mac_addr_params peer_macaddr;
+	__le32 pdev_id;
+} __packed;
+
+#define WLAN_MAX_AC 4
+#define MAX_TX_RATE_VALUES 10
+
+struct wmi_vdev_stats_params {
+	__le32 vdev_id;
+	__le32 beacon_snr;
+	__le32 data_snr;
+	__le32 num_tx_frames[WLAN_MAX_AC];
+	__le32 num_rx_frames;
+	__le32 num_tx_frames_retries[WLAN_MAX_AC];
+	__le32 num_tx_frames_failures[WLAN_MAX_AC];
+	__le32 num_rts_fail;
+	__le32 num_rts_success;
+	__le32 num_rx_err;
+	__le32 num_rx_discard;
+	__le32 num_tx_not_acked;
+	__le32 tx_rate_history[MAX_TX_RATE_VALUES];
+	__le32 beacon_rssi_history[MAX_TX_RATE_VALUES];
+} __packed;
+
 void ath12k_wmi_init_qcn9274(struct ath12k_base *ab,
 			     struct ath12k_wmi_resource_config_arg *config);
 void ath12k_wmi_init_wcn7850(struct ath12k_base *ab,
@@ -4952,6 +4998,8 @@  int ath12k_wmi_probe_resp_tmpl(struct ath12k *ar, u32 vdev_id,
 			       struct sk_buff *tmpl);
 int ath12k_wmi_set_hw_mode(struct ath12k_base *ab,
 			   enum wmi_host_hw_mode_config_type mode);
+int ath12k_wmi_send_stats_request_cmd(struct ath12k *ar, u32 stats_id,
+				      u32 vdev_id, u32 pdev_id);
 
 static inline u32
 ath12k_wmi_caps_ext_get_pdev_id(const struct ath12k_wmi_caps_ext_params *param)