@@ -14,6 +14,7 @@
#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
@@ -55,12 +56,9 @@ static struct gpio_led d2net_leds[] = {
{
.name = "d2net:blue:sata",
.default_trigger = "default-on",
- .gpio = D2NET_GPIO_BLUE_LED_OFF,
- .active_low = 1,
},
{
.name = "d2net:red:fail",
- .gpio = D2NET_GPIO_RED_LED,
},
};
@@ -77,6 +75,17 @@ static struct platform_device d2net_gpio_leds = {
},
};
+static struct gpiod_lookup_table d2net_leds_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_BLUE_LED_OFF, NULL,
+ 0, GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_RED_LED, NULL,
+ 1, GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init d2net_gpio_leds_init(void)
{
int err;
@@ -91,6 +100,7 @@ static void __init d2net_gpio_leds_init(void)
if (err)
pr_err("d2net: failed to configure blue LED blink GPIO\n");
+ gpiod_add_lookup_table(&d2net_leds_gpio_table);
platform_device_register(&d2net_gpio_leds);
}
This makes the LEDs on the D2Net Orion5x board use GPIO descriptors instead of hardcoded GPIOs from the global numberspace. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/mach-orion5x/board-d2net.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)