[v9,01/19] ACPI: processor: Simplify initial onlining to use same path for cold and hotplug

Separate code paths, combined with a flag set in acpi_processor.c to
indicate a struct acpi_processor was for a hotplugged CPU ensured that
per CPU data was only set up the first time that a CPU was initialized.
This appears to be unnecessary as the paths can be combined by letting
the online logic also handle any CPUs online at the time of driver load.

Motivation for this change, beyond simplification, is that ARM64
virtual CPU HP uses the same code paths for hotplug and cold path in
acpi_processor.c so had no easy way to set the flag for hotplug only.
Removing this necessity will enable ARM64 vCPU HP to reuse the existing
code paths.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

---
v9: Drop overly noisy pr_info() print and tidy up a stale comment about
    the flag that no longer exists. Leave in place the note about delayed
    init.
---
 drivers/acpi/acpi_processor.c   |  7 +++---
 drivers/acpi/processor_driver.c | 43 +++++++++------------------------
 include/acpi/processor.h        |  2 +-
 3 files changed, 16 insertions(+), 36 deletions(-)

> On 30 Apr 2024, at 14:24, Jonathan Cameron <jonathan.cameron@huawei.com> wrote:
> 
> Separate code paths, combined with a flag set in acpi_processor.c to
> indicate a struct acpi_processor was for a hotplugged CPU ensured that
> per CPU data was only set up the first time that a CPU was initialized.
> This appears to be unnecessary as the paths can be combined by letting
> the online logic also handle any CPUs online at the time of driver load.
> 
> Motivation for this change, beyond simplification, is that ARM64
> virtual CPU HP uses the same code paths for hotplug and cold path in
> acpi_processor.c so had no easy way to set the flag for hotplug only.
> Removing this necessity will enable ARM64 vCPU HP to reuse the existing
> code paths.
> 
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
> Tested-by: Miguel Luis <miguel.luis@oracle.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> ---
> v9: Drop overly noisy pr_info() print and tidy up a stale comment about
>    the flag that no longer exists. Leave in place the note about delayed
>    init.
> ---
> drivers/acpi/acpi_processor.c   |  7 +++---
> drivers/acpi/processor_driver.c | 43 +++++++++------------------------
> include/acpi/processor.h        |  2 +-
> 3 files changed, 16 insertions(+), 36 deletions(-)
> 

Looks good to me.

Reviewed-by: Miguel Luis <miguel.luis@oracle.com>

Thank you,
Miguel

> diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
> index 7a0dd35d62c9..b2f0b6c19482 100644
> --- a/drivers/acpi/acpi_processor.c
> +++ b/drivers/acpi/acpi_processor.c
> @@ -211,12 +211,11 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
> }
> 
> /*
> - * CPU got hot-added, but cpu_data is not initialized yet.  Set a flag
> - * to delay cpu_idle/throttling initialization and do it when the CPU
> - * gets online for the first time.
> + * CPU got hot-added, but cpu_data is not initialized yet. Do
> + * cpu_idle/throttling initialization when the CPU gets online for
> + * the first time.
> */
> pr_info("CPU%d has been hot-added\n", pr->id);
> - pr->flags.need_hotplug_init = 1;
> 
> out:
> cpus_write_unlock();
> diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
> index 67db60eda370..cb52dd000b95 100644
> --- a/drivers/acpi/processor_driver.c
> +++ b/drivers/acpi/processor_driver.c
> @@ -33,7 +33,6 @@ MODULE_AUTHOR("Paul Diefenbaugh");
> MODULE_DESCRIPTION("ACPI Processor Driver");
> MODULE_LICENSE("GPL");
> 
> -static int acpi_processor_start(struct device *dev);
> static int acpi_processor_stop(struct device *dev);
> 
> static const struct acpi_device_id processor_device_ids[] = {
> @@ -47,7 +46,6 @@ static struct device_driver acpi_processor_driver = {
> .name = "processor",
> .bus = &cpu_subsys,
> .acpi_match_table = processor_device_ids,
> - .probe = acpi_processor_start,
> .remove = acpi_processor_stop,
> };
> 
> @@ -115,12 +113,9 @@ static int acpi_soft_cpu_online(unsigned int cpu)
> * CPU got physically hotplugged and onlined for the first time:
> * Initialize missing things.
> */
> - if (pr->flags.need_hotplug_init) {
> + if (!pr->flags.previously_online) {
> int ret;
> 
> - pr_info("Will online and init hotplugged CPU: %d\n",
> - pr->id);
> - pr->flags.need_hotplug_init = 0;
> ret = __acpi_processor_start(device);
> WARN(ret, "Failed to start CPU: %d\n", pr->id);
> } else {
> @@ -167,9 +162,6 @@ static int __acpi_processor_start(struct acpi_device *device)
> if (!pr)
> return -ENODEV;
> 
> - if (pr->flags.need_hotplug_init)
> - return 0;
> -
> result = acpi_cppc_processor_probe(pr);
> if (result && !IS_ENABLED(CONFIG_ACPI_CPU_FREQ_PSS))
> dev_dbg(&device->dev, "CPPC data invalid or not present\n");
> @@ -185,32 +177,21 @@ static int __acpi_processor_start(struct acpi_device *device)
> 
> status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
>     acpi_processor_notify, device);
> - if (ACPI_SUCCESS(status))
> - return 0;
> + if (!ACPI_SUCCESS(status)) {
> + result = -ENODEV;
> + goto err_thermal_exit;
> + }
> + pr->flags.previously_online = 1;
> 
> - result = -ENODEV;
> - acpi_processor_thermal_exit(pr, device);
> + return 0;
> 
> +err_thermal_exit:
> + acpi_processor_thermal_exit(pr, device);
> err_power_exit:
> acpi_processor_power_exit(pr);
> return result;
> }
> 
> -static int acpi_processor_start(struct device *dev)
> -{
> - struct acpi_device *device = ACPI_COMPANION(dev);
> - int ret;
> -
> - if (!device)
> - return -ENODEV;
> -
> - /* Protect against concurrent CPU hotplug operations */
> - cpu_hotplug_disable();
> - ret = __acpi_processor_start(device);
> - cpu_hotplug_enable();
> - return ret;
> -}
> -
> static int acpi_processor_stop(struct device *dev)
> {
> struct acpi_device *device = ACPI_COMPANION(dev);
> @@ -279,9 +260,9 @@ static int __init acpi_processor_driver_init(void)
> if (result < 0)
> return result;
> 
> - result = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
> -   "acpi/cpu-drv:online",
> -   acpi_soft_cpu_online, NULL);
> + result = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> +   "acpi/cpu-drv:online",
> +   acpi_soft_cpu_online, NULL);
> if (result < 0)
> goto err;
> hp_online = result;
> diff --git a/include/acpi/processor.h b/include/acpi/processor.h
> index 3f34ebb27525..e6f6074eadbf 100644
> --- a/include/acpi/processor.h
> +++ b/include/acpi/processor.h
> @@ -217,7 +217,7 @@ struct acpi_processor_flags {
> u8 has_lpi:1;
> u8 power_setup_done:1;
> u8 bm_rld_set:1;
> - u8 need_hotplug_init:1;
> + u8 previously_online:1;
> };
> 
> struct acpi_processor {
> -- 
> 2.39.2
>