diff mbox series

Bluetooth: qca: Use common error handling code in two functions

Message ID fd9f738e-8e78-4afb-96fd-907f72fb4e13@web.de
State New
Headers show
Series Bluetooth: qca: Use common error handling code in two functions | expand

Commit Message

Markus Elfring May 5, 2024, 8:39 a.m. UTC
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sun, 5 May 2024 10:30:28 +0200

Add a jump target so that the setting of an error code can be better reused
at the end of these function implementations.

This issue was transformed by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
 drivers/bluetooth/btqca.c | 35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

--
2.44.0

Comments

Julia Lawall May 5, 2024, 9:06 a.m. UTC | #1
On Sun, 5 May 2024, Markus Elfring wrote:

> From: Markus Elfring <elfring@users.sourceforge.net>
> Date: Sun, 5 May 2024 10:30:28 +0200
>
> Add a jump target so that the setting of an error code can be better reused
> at the end of these function implementations.
>
> This issue was transformed by using the Coccinelle software.

This reduces readability, and backwards jumps are rarely desirable.

julia

>
> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
> ---
>  drivers/bluetooth/btqca.c | 35 +++++++++++++++++------------------
>  1 file changed, 17 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index cc61014ffbc9..1833aaa6d87b 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -108,10 +108,8 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
>  		return err;
>  	}
>
> -	if (skb->len < sizeof(*edl)) {
> -		err = -EILSEQ;
> -		goto out;
> -	}
> +	if (skb->len < sizeof(*edl))
> +		goto e_ilseq;
>
>  	edl = (struct edl_event_hdr *)(skb->data);
>
> @@ -123,17 +121,13 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
>  		goto out;
>  	}
>
> -	if (skb->len < sizeof(*edl) + 1) {
> -		err = -EILSEQ;
> -		goto out;
> -	}
> +	if (skb->len < sizeof(*edl) + 1)
> +		goto e_ilseq;
>
>  	build_lbl_len = edl->data[0];
>
> -	if (skb->len < sizeof(*edl) + 1 + build_lbl_len) {
> -		err = -EILSEQ;
> -		goto out;
> -	}
> +	if (skb->len < sizeof(*edl) + 1 + build_lbl_len)
> +		goto e_ilseq;
>
>  	build_label = kstrndup(&edl->data[1], build_lbl_len, GFP_KERNEL);
>  	if (!build_label)
> @@ -145,6 +139,10 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
>  out:
>  	kfree_skb(skb);
>  	return err;
> +
> +e_ilseq:
> +	err = -EILSEQ;
> +	goto out;
>  }
>
>  static int qca_send_patch_config_cmd(struct hci_dev *hdev)
> @@ -224,8 +222,7 @@ static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
>  	edl = skb_pull_data(skb, sizeof(*edl));
>  	if (!edl) {
>  		bt_dev_err(hdev, "QCA read board ID with no header");
> -		err = -EILSEQ;
> -		goto out;
> +		goto e_ilseq;
>  	}
>
>  	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
> @@ -235,10 +232,8 @@ static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
>  		goto out;
>  	}
>
> -	if (skb->len < 3) {
> -		err = -EILSEQ;
> -		goto out;
> -	}
> +	if (skb->len < 3)
> +		goto e_ilseq;
>
>  	*bid = (edl->data[1] << 8) + edl->data[2];
>  	bt_dev_dbg(hdev, "%s: bid = %x", __func__, *bid);
> @@ -246,6 +241,10 @@ static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
>  out:
>  	kfree_skb(skb);
>  	return err;
> +
> +e_ilseq:
> +	err = -EILSEQ;
> +	goto out;
>  }
>
>  int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
> --
> 2.44.0
>
>
>
bluez.test.bot@gmail.com May 5, 2024, 9:33 a.m. UTC | #2
This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=850522

---Test result---

Test Summary:
CheckPatch                    PASS      0.60 seconds
GitLint                       PASS      0.28 seconds
SubjectPrefix                 PASS      0.10 seconds
BuildKernel                   PASS      29.70 seconds
CheckAllWarning               PASS      32.31 seconds
CheckSparse                   PASS      38.38 seconds
CheckSmatch                   FAIL      34.98 seconds
BuildKernel32                 PASS      28.68 seconds
TestRunnerSetup               PASS      518.82 seconds
TestRunner_l2cap-tester       PASS      18.36 seconds
TestRunner_iso-tester         FAIL      35.11 seconds
TestRunner_bnep-tester        PASS      4.80 seconds
TestRunner_mgmt-tester        PASS      111.01 seconds
TestRunner_rfcomm-tester      PASS      7.26 seconds
TestRunner_sco-tester         PASS      15.13 seconds
TestRunner_ioctl-tester       PASS      7.67 seconds
TestRunner_mesh-tester        PASS      5.85 seconds
TestRunner_smp-tester         PASS      6.82 seconds
TestRunner_userchan-tester    PASS      4.96 seconds
IncrementalBuild              PASS      27.54 seconds

Details
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:

Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: net] Error 2
make[2]: *** Waiting for unfinished jobs....
Segmentation fault (core dumped)
make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
make: *** [Makefile:240: __sub-make] Error 2
##############################
Test: TestRunner_iso-tester - FAIL
Desc: Run iso-tester with test-runner
Output:
Total: 122, Passed: 121 (99.2%), Failed: 1, Not Run: 0

Failed Test Cases
ISO Connect Suspend - Success                        Failed       4.169 seconds


---
Regards,
Linux Bluetooth
Markus Elfring May 5, 2024, 10:30 a.m. UTC | #3
>> Add a jump target so that the setting of an error code can be better reused
>> at the end of these function implementations.> This reduces readability, and backwards jumps are rarely desirable.

Would you like to support any other design approaches better for
the reduction of questionable source code duplication?

Regards,
Markus
Julia Lawall May 5, 2024, 10:37 a.m. UTC | #4
On Sun, 5 May 2024, Markus Elfring wrote:

> >> Add a jump target so that the setting of an error code can be better reused
> >> at the end of these function implementations.
> …
> > This reduces readability, and backwards jumps are rarely desirable.
>
> Would you like to support any other design approaches better for
> the reduction of questionable source code duplication?

Maybe cleanup.h can be used to get rid of the kfree_skb.  I have no idea.

It would be nice to keep the patch in the message so that one could see
what is being discussed from the message itself.

julia
Dan Carpenter May 6, 2024, 5:35 a.m. UTC | #5
On Sun, May 05, 2024 at 02:33:32AM -0700, bluez.test.bot@gmail.com wrote:
> This is automated email and please do not reply to this email!
> 
> Dear submitter,
> 
> Thank you for submitting the patches to the linux bluetooth mailing list.
> This is a CI test results with your patch series:
> PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=850522
> 
> ---Test result---
> 
> Test Summary:
> CheckPatch                    PASS      0.60 seconds
> GitLint                       PASS      0.28 seconds
> SubjectPrefix                 PASS      0.10 seconds
> BuildKernel                   PASS      29.70 seconds
> CheckAllWarning               PASS      32.31 seconds
> CheckSparse                   PASS      38.38 seconds
> CheckSmatch                   FAIL      34.98 seconds
> BuildKernel32                 PASS      28.68 seconds
> TestRunnerSetup               PASS      518.82 seconds
> TestRunner_l2cap-tester       PASS      18.36 seconds
> TestRunner_iso-tester         FAIL      35.11 seconds
> TestRunner_bnep-tester        PASS      4.80 seconds
> TestRunner_mgmt-tester        PASS      111.01 seconds
> TestRunner_rfcomm-tester      PASS      7.26 seconds
> TestRunner_sco-tester         PASS      15.13 seconds
> TestRunner_ioctl-tester       PASS      7.67 seconds
> TestRunner_mesh-tester        PASS      5.85 seconds
> TestRunner_smp-tester         PASS      6.82 seconds
> TestRunner_userchan-tester    PASS      4.96 seconds
> IncrementalBuild              PASS      27.54 seconds
> 
> Details
> ##############################
> Test: CheckSmatch - FAIL
> Desc: Run smatch tool with source
> Output:
> 
> Segmentation fault (core dumped)
> make[4]: *** [scripts/Makefile.build:244: net/bluetooth/hci_core.o] Error 139
> make[4]: *** Deleting file 'net/bluetooth/hci_core.o'
> make[3]: *** [scripts/Makefile.build:485: net/bluetooth] Error 2
> make[2]: *** [scripts/Makefile.build:485: net] Error 2
> make[2]: *** Waiting for unfinished jobs....
> Segmentation fault (core dumped)
> make[4]: *** [scripts/Makefile.build:244: drivers/bluetooth/bcm203x.o] Error 139
> make[4]: *** Deleting file 'drivers/bluetooth/bcm203x.o'
> make[4]: *** Waiting for unfinished jobs....
> make[3]: *** [scripts/Makefile.build:485: drivers/bluetooth] Error 2
> make[2]: *** [scripts/Makefile.build:485: drivers] Error 2
> make[1]: *** [/github/workspace/src/src/Makefile:1919: .] Error 2
> make: *** [Makefile:240: __sub-make] Error 2

:(  This is annoying...  Are you using the latest release?  The released
code is working for me.

regards,
dan carpenter
diff mbox series

Patch

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index cc61014ffbc9..1833aaa6d87b 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -108,10 +108,8 @@  static int qca_read_fw_build_info(struct hci_dev *hdev)
 		return err;
 	}

-	if (skb->len < sizeof(*edl)) {
-		err = -EILSEQ;
-		goto out;
-	}
+	if (skb->len < sizeof(*edl))
+		goto e_ilseq;

 	edl = (struct edl_event_hdr *)(skb->data);

@@ -123,17 +121,13 @@  static int qca_read_fw_build_info(struct hci_dev *hdev)
 		goto out;
 	}

-	if (skb->len < sizeof(*edl) + 1) {
-		err = -EILSEQ;
-		goto out;
-	}
+	if (skb->len < sizeof(*edl) + 1)
+		goto e_ilseq;

 	build_lbl_len = edl->data[0];

-	if (skb->len < sizeof(*edl) + 1 + build_lbl_len) {
-		err = -EILSEQ;
-		goto out;
-	}
+	if (skb->len < sizeof(*edl) + 1 + build_lbl_len)
+		goto e_ilseq;

 	build_label = kstrndup(&edl->data[1], build_lbl_len, GFP_KERNEL);
 	if (!build_label)
@@ -145,6 +139,10 @@  static int qca_read_fw_build_info(struct hci_dev *hdev)
 out:
 	kfree_skb(skb);
 	return err;
+
+e_ilseq:
+	err = -EILSEQ;
+	goto out;
 }

 static int qca_send_patch_config_cmd(struct hci_dev *hdev)
@@ -224,8 +222,7 @@  static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
 	edl = skb_pull_data(skb, sizeof(*edl));
 	if (!edl) {
 		bt_dev_err(hdev, "QCA read board ID with no header");
-		err = -EILSEQ;
-		goto out;
+		goto e_ilseq;
 	}

 	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
@@ -235,10 +232,8 @@  static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
 		goto out;
 	}

-	if (skb->len < 3) {
-		err = -EILSEQ;
-		goto out;
-	}
+	if (skb->len < 3)
+		goto e_ilseq;

 	*bid = (edl->data[1] << 8) + edl->data[2];
 	bt_dev_dbg(hdev, "%s: bid = %x", __func__, *bid);
@@ -246,6 +241,10 @@  static int qca_read_fw_board_id(struct hci_dev *hdev, u16 *bid)
 out:
 	kfree_skb(skb);
 	return err;
+
+e_ilseq:
+	err = -EILSEQ;
+	goto out;
 }

 int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)