@@ -1217,57 +1217,20 @@ static bool is_dell_system_with_lis3lv02d(void)
}
/*
- * Accelerometer's I2C address is not specified in DMI nor ACPI,
- * so it is needed to define mapping table based on DMI product names.
+ * Accelerometer's I2C address is not specified in DMI nor ACPI.
+ * With one exception all systems use address 0x29.
*/
-static const struct {
- const char *dmi_product_name;
- unsigned short i2c_addr;
-} dell_lis3lv02d_devices[] = {
- /*
- * Dell platform team told us that these Latitude devices have
- * ST microelectronics accelerometer at I2C address 0x29.
- */
- { "Latitude E5250", 0x29 },
- { "Latitude E5450", 0x29 },
- { "Latitude E5550", 0x29 },
- { "Latitude E6440", 0x29 },
- { "Latitude E6440 ATG", 0x29 },
- { "Latitude E6540", 0x29 },
- /*
- * Additional individual entries were added after verification.
- */
- { "Latitude 5480", 0x29 },
- { "Precision 3540", 0x29 },
- { "Vostro V131", 0x1d },
- { "Vostro 5568", 0x29 },
- { "XPS 15 7590", 0x29 },
-};
+static const unsigned short dell_lis3lv02d_addr_list[] = { 0x29, 0x1d, I2C_CLIENT_END };
static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
{
- struct i2c_board_info info;
- const char *dmi_product_name;
- int i;
-
- dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
- for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) {
- if (strcmp(dmi_product_name,
- dell_lis3lv02d_devices[i].dmi_product_name) == 0)
- break;
- }
+ struct i2c_board_info info = { .type = "lis3lv02d" };
+ struct i2c_client *cl;
- if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) {
+ cl = i2c_new_scanned_device(&priv->adapter, &info, dell_lis3lv02d_addr_list, NULL);
+ if (IS_ERR(cl))
dev_warn(&priv->pci_dev->dev,
- "Accelerometer lis3lv02d is present on SMBus but its"
- " address is unknown, skipping registration\n");
- return;
- }
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = dell_lis3lv02d_devices[i].i2c_addr;
- strscpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
- i2c_new_client_device(&priv->adapter, &info);
+ "Accelerometer is present, but couldn't be registered at any known address\n");
}
/* Register optional slaves */
So far each new Dell device with an accelerometer requires a patch. All devices, with one older system as an exception, use address 0x29. So I think we can safely scan for the correct address, and avoid the need for a patch per device. Last but not least this allows to significantly simplify the code. I don't have such a Dell system, therefore patch is compile-tested only. If you have a Dell system with accelerometer, testing the patch would be appreciated. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/i2c/busses/i2c-i801.c | 53 ++++++----------------------------- 1 file changed, 8 insertions(+), 45 deletions(-)