@@ -6,7 +6,6 @@ menuconfig ARCH_MXC
select CLKSRC_IMX_GPT
select GENERIC_IRQ_CHIP
select GPIOLIB
- select PINCTRL
select PM_OPP if PM
select SOC_BUS
select SRAM
@@ -49,7 +48,6 @@ config SOC_IMX31
config SOC_IMX35
bool "i.MX35 support"
select MXC_AVIC
- select PINCTRL_IMX35
help
This enables support for Freescale i.MX35 processor
@@ -61,7 +59,6 @@ config SOC_IMX1
bool "i.MX1 support"
select CPU_ARM920T
select MXC_AVIC
- select PINCTRL_IMX1
help
This enables support for Freescale i.MX1 processor
@@ -73,7 +70,6 @@ config SOC_IMX25
bool "i.MX25 support"
select CPU_ARM926T
select MXC_AVIC
- select PINCTRL_IMX25
help
This enables support for Freescale i.MX25 processor
@@ -81,7 +77,6 @@ config SOC_IMX27
bool "i.MX27 support"
select CPU_ARM926T
select MXC_AVIC
- select PINCTRL_IMX27
help
This enables support for Freescale i.MX27 processor
@@ -98,7 +93,6 @@ config SOC_IMX5
config SOC_IMX50
bool "i.MX50 support"
- select PINCTRL_IMX50
select SOC_IMX5
help
@@ -106,14 +100,12 @@ config SOC_IMX50
config SOC_IMX51
bool "i.MX51 support"
- select PINCTRL_IMX51
select SOC_IMX5
help
This enables support for Freescale i.MX51 processor
config SOC_IMX53
bool "i.MX53 support"
- select PINCTRL_IMX53
select SOC_IMX5
help
@@ -137,7 +129,6 @@ config SOC_IMX6Q
select ARM_ERRATA_775420
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD
- select PINCTRL_IMX6Q
select SOC_IMX6
help
@@ -147,7 +138,6 @@ config SOC_IMX6SL
bool "i.MX6 SoloLite support"
select ARM_ERRATA_754322
select ARM_ERRATA_775420
- select PINCTRL_IMX6SL
select SOC_IMX6
help
@@ -157,7 +147,6 @@ config SOC_IMX6SLL
bool "i.MX6 SoloLiteLite support"
select ARM_ERRATA_754322
select ARM_ERRATA_775420
- select PINCTRL_IMX6SLL
select SOC_IMX6
help
@@ -167,7 +156,6 @@ config SOC_IMX6SX
bool "i.MX6 SoloX support"
select ARM_ERRATA_754322
select ARM_ERRATA_775420
- select PINCTRL_IMX6SX
select SOC_IMX6
help
@@ -175,7 +163,6 @@ config SOC_IMX6SX
config SOC_IMX6UL
bool "i.MX6 UltraLite support"
- select PINCTRL_IMX6UL
select SOC_IMX6
select ARM_ERRATA_814220
@@ -211,7 +198,6 @@ config SOC_IMX7D_CM4
config SOC_IMX7D
bool "i.MX7 Dual support"
- select PINCTRL_IMX7D
select SOC_IMX7D_CA7 if ARCH_MULTI_V7
select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
select ARM_ERRATA_814220 if ARCH_MULTI_V7
@@ -221,7 +207,6 @@ config SOC_IMX7D
config SOC_IMX7ULP
bool "i.MX7ULP support"
select CLKSRC_IMX_TPM
- select PINCTRL_IMX7ULP
select SOC_IMX7D_CA7 if ARCH_MULTI_V7
select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
help
@@ -237,7 +222,6 @@ config SOC_IMXRT
config SOC_VF610
bool "Vybrid Family VF610 support"
select ARM_GIC if ARCH_MULTI_V7
- select PINCTRL_VF610
help
This enables support for Freescale Vybrid VF610 processor.
@@ -20,6 +20,7 @@ config PINCTRL_IMX1_CORE
config PINCTRL_IMX1
bool "IMX1 pinctrl driver"
depends on SOC_IMX1
+ default SOC_IMX1
select PINCTRL_IMX1_CORE
help
Say Y here to enable the imx1 pinctrl driver
@@ -27,6 +28,7 @@ config PINCTRL_IMX1
config PINCTRL_IMX27
bool "IMX27 pinctrl driver"
depends on SOC_IMX27
+ default SOC_IMX27
select PINCTRL_IMX1_CORE
help
Say Y here to enable the imx27 pinctrl driver
@@ -36,6 +38,7 @@ config PINCTRL_IMX25
bool "IMX25 pinctrl driver"
depends on OF
depends on SOC_IMX25
+ default SOC_IMX25
select PINCTRL_IMX
help
Say Y here to enable the imx25 pinctrl driver
@@ -43,6 +46,7 @@ config PINCTRL_IMX25
config PINCTRL_IMX35
bool "IMX35 pinctrl driver"
depends on SOC_IMX35
+ default SOC_IMX35
select PINCTRL_IMX
help
Say Y here to enable the imx35 pinctrl driver
@@ -50,6 +54,7 @@ config PINCTRL_IMX35
config PINCTRL_IMX50
bool "IMX50 pinctrl driver"
depends on SOC_IMX50
+ default SOC_IMX50
select PINCTRL_IMX
help
Say Y here to enable the imx50 pinctrl driver
@@ -57,6 +62,7 @@ config PINCTRL_IMX50
config PINCTRL_IMX51
bool "IMX51 pinctrl driver"
depends on SOC_IMX51
+ default SOC_IMX51
select PINCTRL_IMX
help
Say Y here to enable the imx51 pinctrl driver
@@ -64,6 +70,7 @@ config PINCTRL_IMX51
config PINCTRL_IMX53
bool "IMX53 pinctrl driver"
depends on SOC_IMX53
+ default SOC_IMX53
select PINCTRL_IMX
help
Say Y here to enable the imx53 pinctrl driver
@@ -71,6 +78,7 @@ config PINCTRL_IMX53
config PINCTRL_IMX6Q
bool "IMX6Q/DL pinctrl driver"
depends on SOC_IMX6Q
+ default SOC_IMX6Q
select PINCTRL_IMX
help
Say Y here to enable the imx6q/dl pinctrl driver
@@ -78,6 +86,7 @@ config PINCTRL_IMX6Q
config PINCTRL_IMX6SL
bool "IMX6SL pinctrl driver"
depends on SOC_IMX6SL
+ default SOC_IMX6SL
select PINCTRL_IMX
help
Say Y here to enable the imx6sl pinctrl driver
@@ -85,6 +94,7 @@ config PINCTRL_IMX6SL
config PINCTRL_IMX6SLL
bool "IMX6SLL pinctrl driver"
depends on SOC_IMX6SLL
+ default SOC_IMX6SLL
select PINCTRL_IMX
help
Say Y here to enable the imx6sll pinctrl driver
@@ -92,6 +102,7 @@ config PINCTRL_IMX6SLL
config PINCTRL_IMX6SX
bool "IMX6SX pinctrl driver"
depends on SOC_IMX6SX
+ default SOC_IMX6SX
select PINCTRL_IMX
help
Say Y here to enable the imx6sx pinctrl driver
@@ -99,6 +110,7 @@ config PINCTRL_IMX6SX
config PINCTRL_IMX6UL
bool "IMX6UL pinctrl driver"
depends on SOC_IMX6UL
+ default SOC_IMX6UL
select PINCTRL_IMX
help
Say Y here to enable the imx6ul pinctrl driver
@@ -106,6 +118,7 @@ config PINCTRL_IMX6UL
config PINCTRL_IMX7D
bool "IMX7D pinctrl driver"
depends on SOC_IMX7D
+ default SOC_IMX7D
select PINCTRL_IMX
help
Say Y here to enable the imx7d pinctrl driver
@@ -113,6 +126,7 @@ config PINCTRL_IMX7D
config PINCTRL_IMX7ULP
bool "IMX7ULP pinctrl driver"
depends on SOC_IMX7ULP
+ default SOC_IMX7ULP
select PINCTRL_IMX
help
Say Y here to enable the imx7ulp pinctrl driver
@@ -194,6 +208,7 @@ config PINCTRL_IMX93
config PINCTRL_VF610
bool "Freescale Vybrid VF610 pinctrl driver"
depends on SOC_VF610
+ default SOC_VF610
select PINCTRL_IMX
help
Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
Making pinctrl drivers and subsequently the pinctrl framework user-controllable, allows building a kernel without this. While in many (most) cases, this could make the system unbootable, it does allow building smaller kernels for those situations where picntrl is not needed. One such situation is when building a kernel for NXP LS1021A systems, which does not have run-time controllable pinctrl, so pinctrl framework and drivers are 100% dead-weight. Signed-off-by: Esben Haabendal <esben@geanix.com> --- arch/arm/mach-imx/Kconfig | 16 ---------------- drivers/pinctrl/freescale/Kconfig | 15 +++++++++++++++ 2 files changed, 15 insertions(+), 16 deletions(-)