| Message ID | 20240509184502.52480-1-mario.limonciello@amd.com |
|---|---|
| State | New |
| Headers | show |
| Series | ACPI: x86: Force StorageD3Enable on more products | expand |
Hi, On 5/9/24 8:45 PM, Mario Limonciello wrote: > A Rembrandt-based HP thin client is reported to have problems where > the NVME disk isn't present after resume from s2idle. > > This is because the NVME disk wasn't put into D3 at suspend, and > that happened because the StorageD3Enable _DSD was missing in the BIOS. > > As AMD's architecture requires that the NVME is in D3 for s2idle, adjust > the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT > advertises low power idle support. > > This will ensure that any future products with this BIOS deficiency don't > need to be added to the allow list of overrides. > > Cc: stable@vger.kernel.org > Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Thanks, patch looks good to me: Acked-by: Hans de Goede <hdegoede@redhat.com> Regards, Hans > --- > drivers/acpi/x86/utils.c | 24 ++++++++++-------------- > 1 file changed, 10 insertions(+), 14 deletions(-) > > diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c > index 90c3d2eab9e9..7507a7706898 100644 > --- a/drivers/acpi/x86/utils.c > +++ b/drivers/acpi/x86/utils.c > @@ -197,16 +197,16 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s > } > > /* > - * AMD systems from Renoir and Lucienne *require* that the NVME controller > + * AMD systems from Renoir onwards *require* that the NVME controller > * is put into D3 over a Modern Standby / suspend-to-idle cycle. > * > * This is "typically" accomplished using the `StorageD3Enable` > * property in the _DSD that is checked via the `acpi_storage_d3` function > - * but this property was introduced after many of these systems launched > - * and most OEM systems don't have it in their BIOS. > + * but some OEM systems still don't have it in their BIOS. > * > * The Microsoft documentation for StorageD3Enable mentioned that Windows has > - * a hardcoded allowlist for D3 support, which was used for these platforms. > + * a hardcoded allowlist for D3 support as well as a registry key to override > + * the BIOS, which has been used for these cases. > * > * This allows quirking on Linux in a similar fashion. > * > @@ -219,19 +219,15 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s > * https://bugzilla.kernel.org/show_bug.cgi?id=216773 > * https://bugzilla.kernel.org/show_bug.cgi?id=217003 > * 2) On at least one HP system StorageD3Enable is missing on the second NVME > - disk in the system. > + * disk in the system. > + * 3) On at least one HP Rembrandt system StorageD3Enable is missing on the only > + * NVME device. > */ > -static const struct x86_cpu_id storage_d3_cpu_ids[] = { > - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 24, NULL), /* Picasso */ > - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL), /* Renoir */ > - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL), /* Lucienne */ > - X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL), /* Cezanne */ > - {} > -}; > - > bool force_storage_d3(void) > { > - return x86_match_cpu(storage_d3_cpu_ids); > + if (!cpu_feature_enabled(X86_FEATURE_ZEN)) > + return false; > + return acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0; > } > > /*
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index 90c3d2eab9e9..7507a7706898 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -197,16 +197,16 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s } /* - * AMD systems from Renoir and Lucienne *require* that the NVME controller + * AMD systems from Renoir onwards *require* that the NVME controller * is put into D3 over a Modern Standby / suspend-to-idle cycle. * * This is "typically" accomplished using the `StorageD3Enable` * property in the _DSD that is checked via the `acpi_storage_d3` function - * but this property was introduced after many of these systems launched - * and most OEM systems don't have it in their BIOS. + * but some OEM systems still don't have it in their BIOS. * * The Microsoft documentation for StorageD3Enable mentioned that Windows has - * a hardcoded allowlist for D3 support, which was used for these platforms. + * a hardcoded allowlist for D3 support as well as a registry key to override + * the BIOS, which has been used for these cases. * * This allows quirking on Linux in a similar fashion. * @@ -219,19 +219,15 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s * https://bugzilla.kernel.org/show_bug.cgi?id=216773 * https://bugzilla.kernel.org/show_bug.cgi?id=217003 * 2) On at least one HP system StorageD3Enable is missing on the second NVME - disk in the system. + * disk in the system. + * 3) On at least one HP Rembrandt system StorageD3Enable is missing on the only + * NVME device. */ -static const struct x86_cpu_id storage_d3_cpu_ids[] = { - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 24, NULL), /* Picasso */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL), /* Renoir */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL), /* Lucienne */ - X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL), /* Cezanne */ - {} -}; - bool force_storage_d3(void) { - return x86_match_cpu(storage_d3_cpu_ids); + if (!cpu_feature_enabled(X86_FEATURE_ZEN)) + return false; + return acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0; } /*
A Rembrandt-based HP thin client is reported to have problems where the NVME disk isn't present after resume from s2idle. This is because the NVME disk wasn't put into D3 at suspend, and that happened because the StorageD3Enable _DSD was missing in the BIOS. As AMD's architecture requires that the NVME is in D3 for s2idle, adjust the criteria for force_storage_d3 to match *all* Zen SoCs when the FADT advertises low power idle support. This will ensure that any future products with this BIOS deficiency don't need to be added to the allow list of overrides. Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> --- drivers/acpi/x86/utils.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-)