diff mbox series

[v5,6/6] hwmon: (spd5118) Add configuration option for auto-detection

Message ID 20240610144103.1970359-7-linux@roeck-us.net
State New
Headers show
Series hwmon: Add support for SPD5118 compliant chips | expand

Commit Message

Guenter Roeck June 10, 2024, 2:41 p.m. UTC 
With SPD5118 chip detection for the most part handled by the i2c-smbus
core using DMI information, the spd5118 driver no longer needs to
auto-detect spd5118 compliant chips.

Auto-detection by the driver is still needed on systems with no DMI support
or on systems with more than eight DIMMs and can not be removed entirely.
However, it affects boot time and introduces the risk of mis-identifying
chips. Add configuration option to be able to disable it on systems where
chip detection is handled outside the driver.

Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v5: Added Tested-by: tag
    Replaced #ifdef with IS_ENABLED() and included address_list in
    conditional code

v4a:
    Do not auto-select SENSORS_SPD5118_DETECT if DMI is disabled
    Modify help text of SENSORS_SPD5118_DETECT
    Default SENSORS_SPD5118_DETECT to y if (!DMI || !X86)

v4: New patch

 drivers/hwmon/Kconfig   | 19 +++++++++++++++++++
 drivers/hwmon/spd5118.c |  4 ++--
 2 files changed, 21 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7a84e7637b51..d5eced417fc3 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2193,6 +2193,25 @@  config SENSORS_SPD5118
 	  This driver can also be built as a module. If so, the module
 	  will be called spd5118.
 
+config SENSORS_SPD5118_DETECT
+	bool "Enable detect function"
+	depends on SENSORS_SPD5118
+	default (!DMI || !X86)
+	help
+	  If enabled, the driver auto-detects if a chip in the SPD address
+	  range is compliant to the SPD51888 standard and auto-instantiates
+	  if that is the case. If disabled, SPD5118 compliant devices have
+	  to be instantiated by other means. On X86 systems with DMI support
+	  this will typically be done from DMI DDR detection code in the
+	  I2C SMBus subsystem. Devicetree based systems will instantiate
+	  attached devices if the DIMMs are listed in the devicetree file.
+
+	  Disabling the detect function will speed up boot time and reduce
+	  the risk of mis-detecting SPD5118 compliant devices. However, it
+	  may result in missed DIMMs under some circumstances.
+
+	  If unsure, say Y.
+
 config SENSORS_TC74
 	tristate "Microchip TC74"
 	depends on I2C
diff --git a/drivers/hwmon/spd5118.c b/drivers/hwmon/spd5118.c
index de6cf07f3007..ac94a6779360 100644
--- a/drivers/hwmon/spd5118.c
+++ b/drivers/hwmon/spd5118.c
@@ -646,8 +646,8 @@  static struct i2c_driver spd5118_driver = {
 	},
 	.probe		= spd5118_probe,
 	.id_table	= spd5118_id,
-	.detect		= spd5118_detect,
-	.address_list	= normal_i2c,
+	.detect		= IS_ENABLED(CONFIG_SENSORS_SPD5118_DETECT) ? spd5118_detect : NULL,
+	.address_list	= IS_ENABLED(CONFIG_SENSORS_SPD5118_DETECT) ? normal_i2c : NULL,
 };
 
 module_i2c_driver(spd5118_driver);