diff mbox series

[v2,3/4] arm64: dts: qcom: sm8550: add description of CCI controllers

Message ID 20240612215835.1149199-4-vladimir.zapolskiy@linaro.org
State New
Headers show
Series arm64: dts: qcom: add description of CCI controllers for sm8550 and sm8650 | expand

Commit Message

Vladimir Zapolskiy June 12, 2024, 9:58 p.m. UTC
Qualcomm SM8550 SoC contains 3 Camera Control Interface controllers
very similar to the ones found on other Qualcomm SoCs.

One noticeable difference is that cci@ac16000 controller provides only
one I2C bus and has an additional control over AON CCI pins gpio208
and gpio209, but this feature is not yet supported in the CCI driver.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 252 +++++++++++++++++++++++++++
 1 file changed, 252 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index a429115524a6..b62bb47cb043 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2747,6 +2747,98 @@  videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci1_0_default>;
+			pinctrl-1 = <&cci1_0_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac17000 {
+			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac17000 0 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sm8550-camcc";
 			reg = <0 0x0ade0000 0 0x20000>;
@@ -3393,6 +3485,166 @@  tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 211>;
 			wakeup-parent = <&pdc>;
 
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio110";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio111";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio110";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio111";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio113";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio113";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio114";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio115";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio114";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio115";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				sda-pins {
+					pins = "gpio74";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio75";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				sda-pins {
+					pins = "gpio74";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio75";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				sda-pins {
+					pins = "gpio0";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				scl-pins {
+					pins = "gpio1";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				sda-pins {
+					pins = "gpio0";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio1";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio16", "gpio17";