diff mbox series

[v3,11/41] iio: adc: ina2xx-adc: make use of regmap_clear_bits()

Message ID 20240617-review-v3-11-88d1338c4cca@baylibre.com
State New
Headers show
Series iio: simplify with regmap_set_bits(), regmap_clear_bits() | expand

Commit Message

Trevor Gamblin June 17, 2024, 1:49 p.m. UTC 
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
---
 drivers/iio/adc/ina2xx-adc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 9e52207352fb..727e390bd979 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -1046,8 +1046,7 @@  static void ina2xx_remove(struct i2c_client *client)
 	iio_device_unregister(indio_dev);
 
 	/* Powerdown */
-	ret = regmap_update_bits(chip->regmap, INA2XX_CONFIG,
-				 INA2XX_MODE_MASK, 0);
+	ret = regmap_clear_bits(chip->regmap, INA2XX_CONFIG, INA2XX_MODE_MASK);
 	if (ret)
 		dev_warn(&client->dev, "Failed to power down device (%pe)\n",
 			 ERR_PTR(ret));