@@ -108,6 +108,7 @@ struct tasdevice_priv {
unsigned char coef_binaryname[64];
unsigned char rca_binaryname[64];
unsigned char dev_name[32];
+ const char *name_prefix;
unsigned char ndev;
unsigned int magic_num;
unsigned int chip_id;
@@ -1,8 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
//
-// tas2781-lib.c -- TAS2781 Common functions for HDA and ASoC Audio drivers
+// TAS2781 Common functions for HDA and ASoC Audio drivers
//
-// Copyright 2023 Texas Instruments, Inc.
+// Copyright 2023 - 2024 Texas Instruments, Inc.
//
// Author: Shenghao Ding <shenghao-ding@ti.com>
@@ -277,8 +277,13 @@ int tascodec_init(struct tasdevice_priv *tas_priv, void *codec,
*/
mutex_lock(&tas_priv->codec_lock);
- scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin",
- tas_priv->dev_name, tas_priv->ndev);
+ if (tas_priv->name_prefix)
+ scnprintf(tas_priv->rca_binaryname, 64, "%s-%sRCA%d.bin",
+ tas_priv->name_prefix, tas_priv->dev_name,
+ tas_priv->ndev);
+ else
+ scnprintf(tas_priv->rca_binaryname, 64, "%sRCA%d.bin",
+ tas_priv->dev_name, tas_priv->ndev);
crc8_populate_msb(tas_priv->crc8_lkp_tbl, TASDEVICE_CRC8_POLYNOMIAL);
tas_priv->codec = codec;
ret = request_firmware_nowait(module, FW_ACTION_UEVENT,
@@ -394,8 +394,12 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
* failing to load DSP firmware is NOT an error.
*/
tas_priv->fw_state = TASDEVICE_RCA_FW_OK;
- scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin",
- tas_priv->dev_name);
+ if (tas_priv->name_prefix)
+ scnprintf(tas_priv->rca_binaryname, 64, "%s-%s_coef.bin",
+ tas_priv->name_prefix, tas_priv->dev_name);
+ else
+ scnprintf(tas_priv->coef_binaryname, 64, "%s_coef.bin",
+ tas_priv->dev_name);
ret = tasdevice_dsp_parser(tas_priv);
if (ret) {
dev_err(tas_priv->dev, "dspfw load %s error\n",
@@ -418,8 +422,15 @@ static void tasdevice_fw_ready(const struct firmware *fmw,
* calibrated data inside algo.
*/
for (i = 0; i < tas_priv->ndev; i++) {
- scnprintf(tas_priv->cal_binaryname[i], 64, "%s_cal_0x%02x.bin",
- tas_priv->dev_name, tas_priv->tasdevice[i].dev_addr);
+ if (tas_priv->name_prefix)
+ scnprintf(tas_priv->cal_binaryname[i], 64,
+ "%s-%s_cal_0x%02x.bin", tas_priv->name_prefix,
+ tas_priv->dev_name,
+ tas_priv->tasdevice[i].dev_addr);
+ else
+ scnprintf(tas_priv->cal_binaryname[i], 64,
+ "%s_cal_0x%02x.bin", tas_priv->dev_name,
+ tas_priv->tasdevice[i].dev_addr);
ret = tas2781_load_calibration(tas_priv,
tas_priv->cal_binaryname[i], i);
if (ret != 0)
@@ -579,6 +590,7 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec)
{
struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(codec);
+ tas_priv->name_prefix = codec->name_prefix;
return tascodec_init(tas_priv, codec, THIS_MODULE, tasdevice_fw_ready);
}
Add name_prefix as the prefix name of firmwares and kcontrol to support corresponding TAS2563/TAS2781s. name_prefix is not mandatory. Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> --- v2: - Add name_prefix as name prefix of calibration data file. v1: - Changed the copyright year to 2024 in tas2781-comlib.c. - Correct the filename in the header comments of tas2781-comlib.c, remove the wrong file name. - Add name_prefix as name of firmwares and kcontrol. --- include/sound/tas2781.h | 1 + sound/soc/codecs/tas2781-comlib.c | 13 +++++++++---- sound/soc/codecs/tas2781-i2c.c | 20 ++++++++++++++++---- 3 files changed, 26 insertions(+), 8 deletions(-)