@@ -438,3 +438,11 @@ EM28xx cards list
- MyGica iGrabber
- em2860
- 1f4d:1abe
+ * - 106
+ - Hauppauge USB QuadHD ATSC
+ - em28274
+ - 2040:846d
+ * - 107
+ - MyGica UTV3 Analog USB2.0 TV Box
+ - em2860
+ - eb1a:2860
@@ -554,6 +554,30 @@ static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = {
{-1, -1, -1, -1},
};
+/*
+ * MyGica USB TV Box
+ * GPIO_1,0: 00=Composite audio
+ * 01=Tuner audio
+ * 10=Mute audio
+ * 11=FM radio? (if equipped)
+ * GPIO_2-6: Unused
+ * GPIO_7: ??
+ */
+static const struct em28xx_reg_seq mygica_utv3_composite_audio_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 0xfc, 0xff, 0},
+ { -1, -1, -1, -1},
+};
+
+static const struct em28xx_reg_seq mygica_utv3_tuner_audio_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 0},
+ { -1, -1, -1, -1},
+};
+
+static const struct em28xx_reg_seq mygica_utv3_suspend_gpio[] = {
+ {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 0},
+ { -1, -1, -1, -1},
+};
+
/*
* Button definitions
*/
@@ -2578,6 +2602,32 @@ const struct em28xx_board em28xx_boards[] = {
.tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq,
.leds = hauppauge_usb_quadhd_leds,
},
+ /*
+ * eb1a:2860 MyGica UTV3 Analog USB2.0 TV Box
+ * Empia EM2860, Philips SAA7113, NXP TDA9801T demod,
+ * Tena TNF931D-DFDR1 tuner (contains NXP TDA6509A),
+ * ST HCF4052 demux (switches audio to line out),
+ * no audio over USB
+ */
+ [EM2860_BOARD_MYGICA_UTV3] = {
+ .name = "MyGica UTV3 Analog USB2.0 TV Box",
+ .xclk = EM28XX_XCLK_IR_RC5_MODE | EM28XX_XCLK_FREQUENCY_12MHZ,
+ .tuner_type = TUNER_TENA_TNF_931D_DFDR1,
+ .ir_codes = RC_MAP_MYGICA_UTV3,
+ .decoder = EM28XX_SAA711X,
+ .suspend_gpio = mygica_utv3_suspend_gpio,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = mygica_utv3_composite_audio_gpio,
+ }, {
+ .type = EM28XX_VMUX_TELEVISION,
+ .vmux = SAA7115_COMPOSITE2,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = mygica_utv3_tuner_audio_gpio,
+ } },
+ },
};
EXPORT_SYMBOL_GPL(em28xx_boards);
@@ -2819,6 +2869,7 @@ static const struct em28xx_hash_table em28xx_eeprom_hash[] = {
{0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
{0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
{0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
+ {0x8f597549, EM2860_BOARD_MYGICA_UTV3, TUNER_TENA_TNF_931D_DFDR1},
};
/* I2C devicelist hash table for devices with generic USB IDs */
@@ -2831,6 +2882,7 @@ static const struct em28xx_hash_table em28xx_i2c_hash[] = {
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
{0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028},
+ {0x840d0484, EM2860_BOARD_MYGICA_UTV3, TUNER_TENA_TNF_931D_DFDR1},
};
/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
@@ -143,6 +143,7 @@
#define EM28178_BOARD_PCTV_461E_V2 104
#define EM2860_BOARD_MYGICA_IGRABBER 105
#define EM2874_BOARD_HAUPPAUGE_USB_QUADHD 106
+#define EM2860_BOARD_MYGICA_UTV3 107
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card that has analog TV, composite video, and FM radio inputs, an IR remote, and provides audio only as Line Out, but not over USB. Mine is prepared for an FM tuner, but not equipped with one. Support for FM radio is therefore missing. The device contains: - Empia EM2860 USB bridge - Philips SAA7113 video decoder - NXP TDA9801T demodulator - Tena TNF931D-DFDR1 tuner - ST HCF4052 demux, switches input audio to Line Out Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de> --- .../admin-guide/media/em28xx-cardlist.rst | 8 +++ drivers/media/usb/em28xx/em28xx-cards.c | 52 +++++++++++++++++++ drivers/media/usb/em28xx/em28xx.h | 1 + 3 files changed, 61 insertions(+) -- 2.34.1