diff mbox series

[2/5] Input: cypress_ps2 - fix error handling when sending command fails

Message ID 20240628224728.2180126-2-dmitry.torokhov@gmail.com
State New
Headers show
Series [1/5] Input: cypress_ps2 - clean up setting reporting rate | expand

Commit Message

Dmitry Torokhov June 28, 2024, 10:47 p.m. UTC
Stop layering error handling in cypress_ps2_sendbyte() and simply
pass on error code from ps2_sendbyte() and use it in the callers.

This fixes mishandling of error condition in
cypress_ps2_read_cmd_status() which expects errors to be negative.

Reported-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/mouse/cypress_ps2.c | 32 +++++++++++++++----------------
 drivers/input/mouse/cypress_ps2.h |  6 ------
 2 files changed, 15 insertions(+), 23 deletions(-)
diff mbox series

Patch

diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c
index 32b55b2b9b76..fcc3921e49e0 100644
--- a/drivers/input/mouse/cypress_ps2.c
+++ b/drivers/input/mouse/cypress_ps2.c
@@ -38,15 +38,14 @@  static const unsigned char cytp_resolution[] = {0x00, 0x01, 0x02, 0x03};
 static int cypress_ps2_sendbyte(struct psmouse *psmouse, int value)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	int error;
 
-	if (ps2_sendbyte(ps2dev, value & 0xff, CYTP_CMD_TIMEOUT) < 0) {
+	error = ps2_sendbyte(ps2dev, value & 0xff, CYTP_CMD_TIMEOUT);
+	if (error) {
 		psmouse_dbg(psmouse,
-				"sending command 0x%02x failed, resp 0x%02x\n",
-				value & 0xff, ps2dev->nak);
-		if (ps2dev->nak == CYTP_PS2_RETRY)
-			return CYTP_PS2_RETRY;
-		else
-			return CYTP_PS2_ERROR;
+			    "sending command 0x%02x failed, resp 0x%02x, error %d\n",
+			    value & 0xff, ps2dev->nak, error);
+		return error;
 	}
 
 #ifdef CYTP_DEBUG_VERBOSE
@@ -73,21 +72,20 @@  static int cypress_ps2_ext_cmd(struct psmouse *psmouse, unsigned short cmd,
 		 * to make the device return to the ready state.
 		 */
 		rc = cypress_ps2_sendbyte(psmouse, cmd & 0xff);
-		if (rc == CYTP_PS2_RETRY) {
+		if (rc == -EAGAIN) {
 			rc = cypress_ps2_sendbyte(psmouse, 0x00);
-			if (rc == CYTP_PS2_RETRY)
+			if (rc == -EAGAIN)
 				rc = cypress_ps2_sendbyte(psmouse, 0x0a);
 		}
-		if (rc == CYTP_PS2_ERROR)
-			continue;
 
-		rc = cypress_ps2_sendbyte(psmouse, data);
-		if (rc == CYTP_PS2_RETRY)
+		if (!rc) {
 			rc = cypress_ps2_sendbyte(psmouse, data);
-		if (rc == CYTP_PS2_ERROR)
-			continue;
-		else
-			break;
+			if (rc == -EAGAIN)
+				rc = cypress_ps2_sendbyte(psmouse, data);
+
+			if (!rc)
+				break;
+		}
 	} while (--tries > 0);
 
 	ps2_end_command(ps2dev);
diff --git a/drivers/input/mouse/cypress_ps2.h b/drivers/input/mouse/cypress_ps2.h
index bb4979d06bf9..47d538a49089 100644
--- a/drivers/input/mouse/cypress_ps2.h
+++ b/drivers/input/mouse/cypress_ps2.h
@@ -72,12 +72,6 @@ 
 #define CYTP_DATA_TIMEOUT 30
 
 #define CYTP_EXT_CMD   0xe8
-#define CYTP_PS2_RETRY 0xfe
-#define CYTP_PS2_ERROR 0xfc
-
-#define CYTP_RESP_RETRY 0x01
-#define CYTP_RESP_ERROR 0xfe
-
 
 #define CYTP_105001_WIDTH  97   /* Dell XPS 13 */
 #define CYTP_105001_HIGH   59