@@ -441,6 +441,10 @@ typedef void (*hci_req_complete_t)(struct hci_dev *hdev, u8 status, u16 opcode);
typedef void (*hci_req_complete_skb_t)(struct hci_dev *hdev, u8 status,
u16 opcode, struct sk_buff *skb);
+void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status,
+ hci_req_complete_t *req_complete,
+ hci_req_complete_skb_t *req_complete_skb);
+
#define HCI_REQ_START BIT(0)
#define HCI_REQ_SKB BIT(1)
@@ -14,8 +14,7 @@ bluetooth_6lowpan-y := 6lowpan.o
bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \
hci_sock.o hci_sysfs.o l2cap_core.o l2cap_sock.o smp.o lib.o \
- ecdh_helper.o hci_request.o mgmt_util.o mgmt_config.o hci_codec.o \
- eir.o hci_sync.o
+ ecdh_helper.o mgmt_util.o mgmt_config.o hci_codec.o eir.o hci_sync.o
bluetooth-$(CONFIG_DEV_COREDUMP) += coredump.o
@@ -34,7 +34,6 @@
#include <net/bluetooth/iso.h>
#include <net/bluetooth/mgmt.h>
-#include "hci_request.h"
#include "smp.h"
#include "eir.h"
@@ -40,7 +40,6 @@
#include <net/bluetooth/l2cap.h>
#include <net/bluetooth/mgmt.h>
-#include "hci_request.h"
#include "hci_debugfs.h"
#include "smp.h"
#include "leds.h"
@@ -28,7 +28,6 @@
#include <net/bluetooth/hci_core.h>
#include "smp.h"
-#include "hci_request.h"
#include "hci_debugfs.h"
#define DEFINE_QUIRK_ATTRIBUTE(__name, __quirk) \
@@ -33,7 +33,6 @@
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/mgmt.h>
-#include "hci_request.h"
#include "hci_debugfs.h"
#include "hci_codec.h"
#include "smp.h"
deleted file mode 100644
@@ -1,903 +0,0 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
-
- Copyright (C) 2014 Intel Corporation
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-#include <linux/sched/signal.h>
-
-#include <net/bluetooth/bluetooth.h>
-#include <net/bluetooth/hci_core.h>
-#include <net/bluetooth/mgmt.h>
-
-#include "smp.h"
-#include "hci_request.h"
-#include "msft.h"
-#include "eir.h"
-
-void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
-{
- skb_queue_head_init(&req->cmd_q);
- req->hdev = hdev;
- req->err = 0;
-}
-
-void hci_req_purge(struct hci_request *req)
-{
- skb_queue_purge(&req->cmd_q);
-}
-
-bool hci_req_status_pend(struct hci_dev *hdev)
-{
- return hdev->req_status == HCI_REQ_PEND;
-}
-
-static int req_run(struct hci_request *req, hci_req_complete_t complete,
- hci_req_complete_skb_t complete_skb)
-{
- struct hci_dev *hdev = req->hdev;
- struct sk_buff *skb;
- unsigned long flags;
-
- bt_dev_dbg(hdev, "length %u", skb_queue_len(&req->cmd_q));
-
- /* If an error occurred during request building, remove all HCI
- * commands queued on the HCI request queue.
- */
- if (req->err) {
- skb_queue_purge(&req->cmd_q);
- return req->err;
- }
-
- /* Do not allow empty requests */
- if (skb_queue_empty(&req->cmd_q))
- return -ENODATA;
-
- skb = skb_peek_tail(&req->cmd_q);
- if (complete) {
- bt_cb(skb)->hci.req_complete = complete;
- } else if (complete_skb) {
- bt_cb(skb)->hci.req_complete_skb = complete_skb;
- bt_cb(skb)->hci.req_flags |= HCI_REQ_SKB;
- }
-
- spin_lock_irqsave(&hdev->cmd_q.lock, flags);
- skb_queue_splice_tail(&req->cmd_q, &hdev->cmd_q);
- spin_unlock_irqrestore(&hdev->cmd_q.lock, flags);
-
- queue_work(hdev->workqueue, &hdev->cmd_work);
-
- return 0;
-}
-
-int hci_req_run(struct hci_request *req, hci_req_complete_t complete)
-{
- return req_run(req, complete, NULL);
-}
-
-int hci_req_run_skb(struct hci_request *req, hci_req_complete_skb_t complete)
-{
- return req_run(req, NULL, complete);
-}
-
-void hci_req_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode,
- struct sk_buff *skb)
-{
- bt_dev_dbg(hdev, "result 0x%2.2x", result);
-
- if (hdev->req_status == HCI_REQ_PEND) {
- hdev->req_result = result;
- hdev->req_status = HCI_REQ_DONE;
- if (skb) {
- kfree_skb(hdev->req_skb);
- hdev->req_skb = skb_get(skb);
- }
- wake_up_interruptible(&hdev->req_wait_q);
- }
-}
-
-/* Execute request and wait for completion. */
-int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
- unsigned long opt),
- unsigned long opt, u32 timeout, u8 *hci_status)
-{
- struct hci_request req;
- int err = 0;
-
- bt_dev_dbg(hdev, "start");
-
- hci_req_init(&req, hdev);
-
- hdev->req_status = HCI_REQ_PEND;
-
- err = func(&req, opt);
- if (err) {
- if (hci_status)
- *hci_status = HCI_ERROR_UNSPECIFIED;
- return err;
- }
-
- err = hci_req_run_skb(&req, hci_req_sync_complete);
- if (err < 0) {
- hdev->req_status = 0;
-
- /* ENODATA means the HCI request command queue is empty.
- * This can happen when a request with conditionals doesn't
- * trigger any commands to be sent. This is normal behavior
- * and should not trigger an error return.
- */
- if (err == -ENODATA) {
- if (hci_status)
- *hci_status = 0;
- return 0;
- }
-
- if (hci_status)
- *hci_status = HCI_ERROR_UNSPECIFIED;
-
- return err;
- }
-
- err = wait_event_interruptible_timeout(hdev->req_wait_q,
- hdev->req_status != HCI_REQ_PEND, timeout);
-
- if (err == -ERESTARTSYS)
- return -EINTR;
-
- switch (hdev->req_status) {
- case HCI_REQ_DONE:
- err = -bt_to_errno(hdev->req_result);
- if (hci_status)
- *hci_status = hdev->req_result;
- break;
-
- case HCI_REQ_CANCELED:
- err = -hdev->req_result;
- if (hci_status)
- *hci_status = HCI_ERROR_UNSPECIFIED;
- break;
-
- default:
- err = -ETIMEDOUT;
- if (hci_status)
- *hci_status = HCI_ERROR_UNSPECIFIED;
- break;
- }
-
- kfree_skb(hdev->req_skb);
- hdev->req_skb = NULL;
- hdev->req_status = hdev->req_result = 0;
-
- bt_dev_dbg(hdev, "end: err %d", err);
-
- return err;
-}
-
-int hci_req_sync(struct hci_dev *hdev, int (*req)(struct hci_request *req,
- unsigned long opt),
- unsigned long opt, u32 timeout, u8 *hci_status)
-{
- int ret;
-
- /* Serialize all requests */
- hci_req_sync_lock(hdev);
- /* check the state after obtaing the lock to protect the HCI_UP
- * against any races from hci_dev_do_close when the controller
- * gets removed.
- */
- if (test_bit(HCI_UP, &hdev->flags))
- ret = __hci_req_sync(hdev, req, opt, timeout, hci_status);
- else
- ret = -ENETDOWN;
- hci_req_sync_unlock(hdev);
-
- return ret;
-}
-
-struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode, u32 plen,
- const void *param)
-{
- int len = HCI_COMMAND_HDR_SIZE + plen;
- struct hci_command_hdr *hdr;
- struct sk_buff *skb;
-
- skb = bt_skb_alloc(len, GFP_ATOMIC);
- if (!skb)
- return NULL;
-
- hdr = skb_put(skb, HCI_COMMAND_HDR_SIZE);
- hdr->opcode = cpu_to_le16(opcode);
- hdr->plen = plen;
-
- if (plen)
- skb_put_data(skb, param, plen);
-
- bt_dev_dbg(hdev, "skb len %d", skb->len);
-
- hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
- hci_skb_opcode(skb) = opcode;
-
- return skb;
-}
-
-/* Queue a command to an asynchronous HCI request */
-void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
- const void *param, u8 event)
-{
- struct hci_dev *hdev = req->hdev;
- struct sk_buff *skb;
-
- bt_dev_dbg(hdev, "opcode 0x%4.4x plen %d", opcode, plen);
-
- /* If an error occurred during request building, there is no point in
- * queueing the HCI command. We can simply return.
- */
- if (req->err)
- return;
-
- skb = hci_prepare_cmd(hdev, opcode, plen, param);
- if (!skb) {
- bt_dev_err(hdev, "no memory for command (opcode 0x%4.4x)",
- opcode);
- req->err = -ENOMEM;
- return;
- }
-
- if (skb_queue_empty(&req->cmd_q))
- bt_cb(skb)->hci.req_flags |= HCI_REQ_START;
-
- hci_skb_event(skb) = event;
-
- skb_queue_tail(&req->cmd_q, skb);
-}
-
-void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
- const void *param)
-{
- bt_dev_dbg(req->hdev, "HCI_REQ-0x%4.4x", opcode);
- hci_req_add_ev(req, opcode, plen, param, 0);
-}
-
-static void start_interleave_scan(struct hci_dev *hdev)
-{
- hdev->interleave_scan_state = INTERLEAVE_SCAN_NO_FILTER;
- queue_delayed_work(hdev->req_workqueue,
- &hdev->interleave_scan, 0);
-}
-
-static bool is_interleave_scanning(struct hci_dev *hdev)
-{
- return hdev->interleave_scan_state != INTERLEAVE_SCAN_NONE;
-}
-
-static void cancel_interleave_scan(struct hci_dev *hdev)
-{
- bt_dev_dbg(hdev, "cancelling interleave scan");
-
- cancel_delayed_work_sync(&hdev->interleave_scan);
-
- hdev->interleave_scan_state = INTERLEAVE_SCAN_NONE;
-}
-
-/* Return true if interleave_scan wasn't started until exiting this function,
- * otherwise, return false
- */
-static bool __hci_update_interleaved_scan(struct hci_dev *hdev)
-{
- /* Do interleaved scan only if all of the following are true:
- * - There is at least one ADV monitor
- * - At least one pending LE connection or one device to be scanned for
- * - Monitor offloading is not supported
- * If so, we should alternate between allowlist scan and one without
- * any filters to save power.
- */
- bool use_interleaving = hci_is_adv_monitoring(hdev) &&
- !(list_empty(&hdev->pend_le_conns) &&
- list_empty(&hdev->pend_le_reports)) &&
- hci_get_adv_monitor_offload_ext(hdev) ==
- HCI_ADV_MONITOR_EXT_NONE;
- bool is_interleaving = is_interleave_scanning(hdev);
-
- if (use_interleaving && !is_interleaving) {
- start_interleave_scan(hdev);
- bt_dev_dbg(hdev, "starting interleave scan");
- return true;
- }
-
- if (!use_interleaving && is_interleaving)
- cancel_interleave_scan(hdev);
-
- return false;
-}
-
-void hci_req_add_le_scan_disable(struct hci_request *req, bool rpa_le_conn)
-{
- struct hci_dev *hdev = req->hdev;
-
- if (hdev->scanning_paused) {
- bt_dev_dbg(hdev, "Scanning is paused for suspend");
- return;
- }
-
- if (use_ext_scan(hdev)) {
- struct hci_cp_le_set_ext_scan_enable cp;
-
- memset(&cp, 0, sizeof(cp));
- cp.enable = LE_SCAN_DISABLE;
- hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE, sizeof(cp),
- &cp);
- } else {
- struct hci_cp_le_set_scan_enable cp;
-
- memset(&cp, 0, sizeof(cp));
- cp.enable = LE_SCAN_DISABLE;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(cp), &cp);
- }
-
- /* Disable address resolution */
- if (hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION) && !rpa_le_conn) {
- __u8 enable = 0x00;
-
- hci_req_add(req, HCI_OP_LE_SET_ADDR_RESOLV_ENABLE, 1, &enable);
- }
-}
-
-static void del_from_accept_list(struct hci_request *req, bdaddr_t *bdaddr,
- u8 bdaddr_type)
-{
- struct hci_cp_le_del_from_accept_list cp;
-
- cp.bdaddr_type = bdaddr_type;
- bacpy(&cp.bdaddr, bdaddr);
-
- bt_dev_dbg(req->hdev, "Remove %pMR (0x%x) from accept list", &cp.bdaddr,
- cp.bdaddr_type);
- hci_req_add(req, HCI_OP_LE_DEL_FROM_ACCEPT_LIST, sizeof(cp), &cp);
-
- if (use_ll_privacy(req->hdev)) {
- struct smp_irk *irk;
-
- irk = hci_find_irk_by_addr(req->hdev, bdaddr, bdaddr_type);
- if (irk) {
- struct hci_cp_le_del_from_resolv_list cp;
-
- cp.bdaddr_type = bdaddr_type;
- bacpy(&cp.bdaddr, bdaddr);
-
- hci_req_add(req, HCI_OP_LE_DEL_FROM_RESOLV_LIST,
- sizeof(cp), &cp);
- }
- }
-}
-
-/* Adds connection to accept list if needed. On error, returns -1. */
-static int add_to_accept_list(struct hci_request *req,
- struct hci_conn_params *params, u8 *num_entries,
- bool allow_rpa)
-{
- struct hci_cp_le_add_to_accept_list cp;
- struct hci_dev *hdev = req->hdev;
-
- /* Already in accept list */
- if (hci_bdaddr_list_lookup(&hdev->le_accept_list, ¶ms->addr,
- params->addr_type))
- return 0;
-
- /* Select filter policy to accept all advertising */
- if (*num_entries >= hdev->le_accept_list_size)
- return -1;
-
- /* Accept list can not be used with RPAs */
- if (!allow_rpa &&
- !hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY) &&
- hci_find_irk_by_addr(hdev, ¶ms->addr, params->addr_type)) {
- return -1;
- }
-
- /* During suspend, only wakeable devices can be in accept list */
- if (hdev->suspended &&
- !(params->flags & HCI_CONN_FLAG_REMOTE_WAKEUP))
- return 0;
-
- *num_entries += 1;
- cp.bdaddr_type = params->addr_type;
- bacpy(&cp.bdaddr, ¶ms->addr);
-
- bt_dev_dbg(hdev, "Add %pMR (0x%x) to accept list", &cp.bdaddr,
- cp.bdaddr_type);
- hci_req_add(req, HCI_OP_LE_ADD_TO_ACCEPT_LIST, sizeof(cp), &cp);
-
- if (use_ll_privacy(hdev)) {
- struct smp_irk *irk;
-
- irk = hci_find_irk_by_addr(hdev, ¶ms->addr,
- params->addr_type);
- if (irk) {
- struct hci_cp_le_add_to_resolv_list cp;
-
- cp.bdaddr_type = params->addr_type;
- bacpy(&cp.bdaddr, ¶ms->addr);
- memcpy(cp.peer_irk, irk->val, 16);
-
- if (hci_dev_test_flag(hdev, HCI_PRIVACY))
- memcpy(cp.local_irk, hdev->irk, 16);
- else
- memset(cp.local_irk, 0, 16);
-
- hci_req_add(req, HCI_OP_LE_ADD_TO_RESOLV_LIST,
- sizeof(cp), &cp);
- }
- }
-
- return 0;
-}
-
-static u8 update_accept_list(struct hci_request *req)
-{
- struct hci_dev *hdev = req->hdev;
- struct hci_conn_params *params;
- struct bdaddr_list *b;
- u8 num_entries = 0;
- bool pend_conn, pend_report;
- /* We allow usage of accept list even with RPAs in suspend. In the worst
- * case, we won't be able to wake from devices that use the privacy1.2
- * features. Additionally, once we support privacy1.2 and IRK
- * offloading, we can update this to also check for those conditions.
- */
- bool allow_rpa = hdev->suspended;
-
- if (use_ll_privacy(hdev))
- allow_rpa = true;
-
- /* Go through the current accept list programmed into the
- * controller one by one and check if that address is still
- * in the list of pending connections or list of devices to
- * report. If not present in either list, then queue the
- * command to remove it from the controller.
- */
- list_for_each_entry(b, &hdev->le_accept_list, list) {
- pend_conn = hci_pend_le_action_lookup(&hdev->pend_le_conns,
- &b->bdaddr,
- b->bdaddr_type);
- pend_report = hci_pend_le_action_lookup(&hdev->pend_le_reports,
- &b->bdaddr,
- b->bdaddr_type);
-
- /* If the device is not likely to connect or report,
- * remove it from the accept list.
- */
- if (!pend_conn && !pend_report) {
- del_from_accept_list(req, &b->bdaddr, b->bdaddr_type);
- continue;
- }
-
- /* Accept list can not be used with RPAs */
- if (!allow_rpa &&
- !hci_dev_test_flag(hdev, HCI_ENABLE_LL_PRIVACY) &&
- hci_find_irk_by_addr(hdev, &b->bdaddr, b->bdaddr_type)) {
- return 0x00;
- }
-
- num_entries++;
- }
-
- /* Since all no longer valid accept list entries have been
- * removed, walk through the list of pending connections
- * and ensure that any new device gets programmed into
- * the controller.
- *
- * If the list of the devices is larger than the list of
- * available accept list entries in the controller, then
- * just abort and return filer policy value to not use the
- * accept list.
- */
- list_for_each_entry(params, &hdev->pend_le_conns, action) {
- if (add_to_accept_list(req, params, &num_entries, allow_rpa))
- return 0x00;
- }
-
- /* After adding all new pending connections, walk through
- * the list of pending reports and also add these to the
- * accept list if there is still space. Abort if space runs out.
- */
- list_for_each_entry(params, &hdev->pend_le_reports, action) {
- if (add_to_accept_list(req, params, &num_entries, allow_rpa))
- return 0x00;
- }
-
- /* Use the allowlist unless the following conditions are all true:
- * - We are not currently suspending
- * - There are 1 or more ADV monitors registered and it's not offloaded
- * - Interleaved scanning is not currently using the allowlist
- */
- if (!idr_is_empty(&hdev->adv_monitors_idr) && !hdev->suspended &&
- hci_get_adv_monitor_offload_ext(hdev) == HCI_ADV_MONITOR_EXT_NONE &&
- hdev->interleave_scan_state != INTERLEAVE_SCAN_ALLOWLIST)
- return 0x00;
-
- /* Select filter policy to use accept list */
- return 0x01;
-}
-
-static bool scan_use_rpa(struct hci_dev *hdev)
-{
- return hci_dev_test_flag(hdev, HCI_PRIVACY);
-}
-
-static void hci_req_start_scan(struct hci_request *req, u8 type, u16 interval,
- u16 window, u8 own_addr_type, u8 filter_policy,
- bool filter_dup, bool addr_resolv)
-{
- struct hci_dev *hdev = req->hdev;
-
- if (hdev->scanning_paused) {
- bt_dev_dbg(hdev, "Scanning is paused for suspend");
- return;
- }
-
- if (use_ll_privacy(hdev) && addr_resolv) {
- u8 enable = 0x01;
-
- hci_req_add(req, HCI_OP_LE_SET_ADDR_RESOLV_ENABLE, 1, &enable);
- }
-
- /* Use ext scanning if set ext scan param and ext scan enable is
- * supported
- */
- if (use_ext_scan(hdev)) {
- struct hci_cp_le_set_ext_scan_params *ext_param_cp;
- struct hci_cp_le_set_ext_scan_enable ext_enable_cp;
- struct hci_cp_le_scan_phy_params *phy_params;
- u8 data[sizeof(*ext_param_cp) + sizeof(*phy_params) * 2];
- u32 plen;
-
- ext_param_cp = (void *)data;
- phy_params = (void *)ext_param_cp->data;
-
- memset(ext_param_cp, 0, sizeof(*ext_param_cp));
- ext_param_cp->own_addr_type = own_addr_type;
- ext_param_cp->filter_policy = filter_policy;
-
- plen = sizeof(*ext_param_cp);
-
- if (scan_1m(hdev) || scan_2m(hdev)) {
- ext_param_cp->scanning_phys |= LE_SCAN_PHY_1M;
-
- memset(phy_params, 0, sizeof(*phy_params));
- phy_params->type = type;
- phy_params->interval = cpu_to_le16(interval);
- phy_params->window = cpu_to_le16(window);
-
- plen += sizeof(*phy_params);
- phy_params++;
- }
-
- if (scan_coded(hdev)) {
- ext_param_cp->scanning_phys |= LE_SCAN_PHY_CODED;
-
- memset(phy_params, 0, sizeof(*phy_params));
- phy_params->type = type;
- phy_params->interval = cpu_to_le16(interval);
- phy_params->window = cpu_to_le16(window);
-
- plen += sizeof(*phy_params);
- phy_params++;
- }
-
- hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_PARAMS,
- plen, ext_param_cp);
-
- memset(&ext_enable_cp, 0, sizeof(ext_enable_cp));
- ext_enable_cp.enable = LE_SCAN_ENABLE;
- ext_enable_cp.filter_dup = filter_dup;
-
- hci_req_add(req, HCI_OP_LE_SET_EXT_SCAN_ENABLE,
- sizeof(ext_enable_cp), &ext_enable_cp);
- } else {
- struct hci_cp_le_set_scan_param param_cp;
- struct hci_cp_le_set_scan_enable enable_cp;
-
- memset(¶m_cp, 0, sizeof(param_cp));
- param_cp.type = type;
- param_cp.interval = cpu_to_le16(interval);
- param_cp.window = cpu_to_le16(window);
- param_cp.own_address_type = own_addr_type;
- param_cp.filter_policy = filter_policy;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_PARAM, sizeof(param_cp),
- ¶m_cp);
-
- memset(&enable_cp, 0, sizeof(enable_cp));
- enable_cp.enable = LE_SCAN_ENABLE;
- enable_cp.filter_dup = filter_dup;
- hci_req_add(req, HCI_OP_LE_SET_SCAN_ENABLE, sizeof(enable_cp),
- &enable_cp);
- }
-}
-
-static void set_random_addr(struct hci_request *req, bdaddr_t *rpa);
-static int hci_update_random_address(struct hci_request *req,
- bool require_privacy, bool use_rpa,
- u8 *own_addr_type)
-{
- struct hci_dev *hdev = req->hdev;
- int err;
-
- /* If privacy is enabled use a resolvable private address. If
- * current RPA has expired or there is something else than
- * the current RPA in use, then generate a new one.
- */
- if (use_rpa) {
- /* If Controller supports LL Privacy use own address type is
- * 0x03
- */
- if (use_ll_privacy(hdev))
- *own_addr_type = ADDR_LE_DEV_RANDOM_RESOLVED;
- else
- *own_addr_type = ADDR_LE_DEV_RANDOM;
-
- if (rpa_valid(hdev))
- return 0;
-
- err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa);
- if (err < 0) {
- bt_dev_err(hdev, "failed to generate new RPA");
- return err;
- }
-
- set_random_addr(req, &hdev->rpa);
-
- return 0;
- }
-
- /* In case of required privacy without resolvable private address,
- * use an non-resolvable private address. This is useful for active
- * scanning and non-connectable advertising.
- */
- if (require_privacy) {
- bdaddr_t nrpa;
-
- while (true) {
- /* The non-resolvable private address is generated
- * from random six bytes with the two most significant
- * bits cleared.
- */
- get_random_bytes(&nrpa, 6);
- nrpa.b[5] &= 0x3f;
-
- /* The non-resolvable private address shall not be
- * equal to the public address.
- */
- if (bacmp(&hdev->bdaddr, &nrpa))
- break;
- }
-
- *own_addr_type = ADDR_LE_DEV_RANDOM;
- set_random_addr(req, &nrpa);
- return 0;
- }
-
- /* If forcing static address is in use or there is no public
- * address use the static address as random address (but skip
- * the HCI command if the current random address is already the
- * static one.
- *
- * In case BR/EDR has been disabled on a dual-mode controller
- * and a static address has been configured, then use that
- * address instead of the public BR/EDR address.
- */
- if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) ||
- !bacmp(&hdev->bdaddr, BDADDR_ANY) ||
- (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) &&
- bacmp(&hdev->static_addr, BDADDR_ANY))) {
- *own_addr_type = ADDR_LE_DEV_RANDOM;
- if (bacmp(&hdev->static_addr, &hdev->random_addr))
- hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
- &hdev->static_addr);
- return 0;
- }
-
- /* Neither privacy nor static address is being used so use a
- * public address.
- */
- *own_addr_type = ADDR_LE_DEV_PUBLIC;
-
- return 0;
-}
-
-/* Ensure to call hci_req_add_le_scan_disable() first to disable the
- * controller based address resolution to be able to reconfigure
- * resolving list.
- */
-void hci_req_add_le_passive_scan(struct hci_request *req)
-{
- struct hci_dev *hdev = req->hdev;
- u8 own_addr_type;
- u8 filter_policy;
- u16 window, interval;
- /* Default is to enable duplicates filter */
- u8 filter_dup = LE_SCAN_FILTER_DUP_ENABLE;
- /* Background scanning should run with address resolution */
- bool addr_resolv = true;
-
- if (hdev->scanning_paused) {
- bt_dev_dbg(hdev, "Scanning is paused for suspend");
- return;
- }
-
- /* Set require_privacy to false since no SCAN_REQ are send
- * during passive scanning. Not using an non-resolvable address
- * here is important so that peer devices using direct
- * advertising with our address will be correctly reported
- * by the controller.
- */
- if (hci_update_random_address(req, false, scan_use_rpa(hdev),
- &own_addr_type))
- return;
-
- if (hdev->enable_advmon_interleave_scan &&
- __hci_update_interleaved_scan(hdev))
- return;
-
- bt_dev_dbg(hdev, "interleave state %d", hdev->interleave_scan_state);
- /* Adding or removing entries from the accept list must
- * happen before enabling scanning. The controller does
- * not allow accept list modification while scanning.
- */
- filter_policy = update_accept_list(req);
-
- /* When the controller is using random resolvable addresses and
- * with that having LE privacy enabled, then controllers with
- * Extended Scanner Filter Policies support can now enable support
- * for handling directed advertising.
- *
- * So instead of using filter polices 0x00 (no accept list)
- * and 0x01 (accept list enabled) use the new filter policies
- * 0x02 (no accept list) and 0x03 (accept list enabled).
- */
- if (hci_dev_test_flag(hdev, HCI_PRIVACY) &&
- (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY))
- filter_policy |= 0x02;
-
- if (hdev->suspended) {
- window = hdev->le_scan_window_suspend;
- interval = hdev->le_scan_int_suspend;
- } else if (hci_is_le_conn_scanning(hdev)) {
- window = hdev->le_scan_window_connect;
- interval = hdev->le_scan_int_connect;
- } else if (hci_is_adv_monitoring(hdev)) {
- window = hdev->le_scan_window_adv_monitor;
- interval = hdev->le_scan_int_adv_monitor;
-
- /* Disable duplicates filter when scanning for advertisement
- * monitor for the following reasons.
- *
- * For HW pattern filtering (ex. MSFT), Realtek and Qualcomm
- * controllers ignore RSSI_Sampling_Period when the duplicates
- * filter is enabled.
- *
- * For SW pattern filtering, when we're not doing interleaved
- * scanning, it is necessary to disable duplicates filter,
- * otherwise hosts can only receive one advertisement and it's
- * impossible to know if a peer is still in range.
- */
- filter_dup = LE_SCAN_FILTER_DUP_DISABLE;
- } else {
- window = hdev->le_scan_window;
- interval = hdev->le_scan_interval;
- }
-
- bt_dev_dbg(hdev, "LE passive scan with accept list = %d",
- filter_policy);
- hci_req_start_scan(req, LE_SCAN_PASSIVE, interval, window,
- own_addr_type, filter_policy, filter_dup,
- addr_resolv);
-}
-
-static int hci_req_add_le_interleaved_scan(struct hci_request *req,
- unsigned long opt)
-{
- struct hci_dev *hdev = req->hdev;
- int ret = 0;
-
- hci_dev_lock(hdev);
-
- if (hci_dev_test_flag(hdev, HCI_LE_SCAN))
- hci_req_add_le_scan_disable(req, false);
- hci_req_add_le_passive_scan(req);
-
- switch (hdev->interleave_scan_state) {
- case INTERLEAVE_SCAN_ALLOWLIST:
- bt_dev_dbg(hdev, "next state: allowlist");
- hdev->interleave_scan_state = INTERLEAVE_SCAN_NO_FILTER;
- break;
- case INTERLEAVE_SCAN_NO_FILTER:
- bt_dev_dbg(hdev, "next state: no filter");
- hdev->interleave_scan_state = INTERLEAVE_SCAN_ALLOWLIST;
- break;
- case INTERLEAVE_SCAN_NONE:
- BT_ERR("unexpected error");
- ret = -1;
- }
-
- hci_dev_unlock(hdev);
-
- return ret;
-}
-
-static void interleave_scan_work(struct work_struct *work)
-{
- struct hci_dev *hdev = container_of(work, struct hci_dev,
- interleave_scan.work);
- u8 status;
- unsigned long timeout;
-
- if (hdev->interleave_scan_state == INTERLEAVE_SCAN_ALLOWLIST) {
- timeout = msecs_to_jiffies(hdev->advmon_allowlist_duration);
- } else if (hdev->interleave_scan_state == INTERLEAVE_SCAN_NO_FILTER) {
- timeout = msecs_to_jiffies(hdev->advmon_no_filter_duration);
- } else {
- bt_dev_err(hdev, "unexpected error");
- return;
- }
-
- hci_req_sync(hdev, hci_req_add_le_interleaved_scan, 0,
- HCI_CMD_TIMEOUT, &status);
-
- /* Don't continue interleaving if it was canceled */
- if (is_interleave_scanning(hdev))
- queue_delayed_work(hdev->req_workqueue,
- &hdev->interleave_scan, timeout);
-}
-
-static void set_random_addr(struct hci_request *req, bdaddr_t *rpa)
-{
- struct hci_dev *hdev = req->hdev;
-
- /* If we're advertising or initiating an LE connection we can't
- * go ahead and change the random address at this time. This is
- * because the eventual initiator address used for the
- * subsequently created connection will be undefined (some
- * controllers use the new address and others the one we had
- * when the operation started).
- *
- * In this kind of scenario skip the update and let the random
- * address be updated at the next cycle.
- */
- if (hci_dev_test_flag(hdev, HCI_LE_ADV) ||
- hci_lookup_le_connect(hdev)) {
- bt_dev_dbg(hdev, "Deferring random address update");
- hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
- return;
- }
-
- hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6, rpa);
-}
-
-void hci_request_setup(struct hci_dev *hdev)
-{
- INIT_DELAYED_WORK(&hdev->interleave_scan, interleave_scan_work);
-}
-
-void hci_request_cancel_all(struct hci_dev *hdev)
-{
- hci_cmd_sync_cancel_sync(hdev, ENODEV);
-
- cancel_interleave_scan(hdev);
-}
deleted file mode 100644
@@ -1,71 +0,0 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2014 Intel Corporation
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-#include <asm/unaligned.h>
-
-#define HCI_REQ_DONE 0
-#define HCI_REQ_PEND 1
-#define HCI_REQ_CANCELED 2
-
-#define hci_req_sync_lock(hdev) mutex_lock(&hdev->req_lock)
-#define hci_req_sync_unlock(hdev) mutex_unlock(&hdev->req_lock)
-
-struct hci_request {
- struct hci_dev *hdev;
- struct sk_buff_head cmd_q;
-
- /* If something goes wrong when building the HCI request, the error
- * value is stored in this field.
- */
- int err;
-};
-
-void hci_req_init(struct hci_request *req, struct hci_dev *hdev);
-void hci_req_purge(struct hci_request *req);
-bool hci_req_status_pend(struct hci_dev *hdev);
-int hci_req_run(struct hci_request *req, hci_req_complete_t complete);
-int hci_req_run_skb(struct hci_request *req, hci_req_complete_skb_t complete);
-void hci_req_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode,
- struct sk_buff *skb);
-void hci_req_add(struct hci_request *req, u16 opcode, u32 plen,
- const void *param);
-void hci_req_add_ev(struct hci_request *req, u16 opcode, u32 plen,
- const void *param, u8 event);
-void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status,
- hci_req_complete_t *req_complete,
- hci_req_complete_skb_t *req_complete_skb);
-
-int hci_req_sync(struct hci_dev *hdev, int (*req)(struct hci_request *req,
- unsigned long opt),
- unsigned long opt, u32 timeout, u8 *hci_status);
-int __hci_req_sync(struct hci_dev *hdev, int (*func)(struct hci_request *req,
- unsigned long opt),
- unsigned long opt, u32 timeout, u8 *hci_status);
-
-struct sk_buff *hci_prepare_cmd(struct hci_dev *hdev, u16 opcode, u32 plen,
- const void *param);
-
-void hci_req_add_le_scan_disable(struct hci_request *req, bool rpa_le_conn);
-void hci_req_add_le_passive_scan(struct hci_request *req);
-
-void hci_request_setup(struct hci_dev *hdev);
-void hci_request_cancel_all(struct hci_dev *hdev);
@@ -33,7 +33,6 @@
#include <net/bluetooth/l2cap.h>
#include <net/bluetooth/mgmt.h>
-#include "hci_request.h"
#include "smp.h"
#include "mgmt_util.h"
#include "mgmt_config.h"
@@ -7,7 +7,6 @@
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/mgmt.h>
-#include "hci_request.h"
#include "mgmt_util.h"
#include "msft.h"