@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mediatek,mt8365-power.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
/ {
compatible = "mediatek,mt8365";
@@ -703,6 +704,23 @@ ethernet: ethernet@112a0000 {
status = "disabled";
};
+ mipi_csi0: mipi-csi0@11c10000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11c10000 0 0x2000>;
+ status = "disabled";
+ num-lanes = <4>;
+ #phy-cells = <1>;
+ };
+
+ mipi_csi1: mipi-csi1@11c12000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11c12000 0 0x2000>;
+ phy-type = <PHY_TYPE_DPHY>;
+ status = "disabled";
+ num-lanes = <4>;
+ #phy-cells = <0>;
+ };
+
u3phy: t-phy@11cc0000 {
compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
#address-cells = <1>;
@@ -773,6 +791,113 @@ larb2: larb@15001000 {
mediatek,larb-id = <2>;
};
+ seninf: seninf@15040000 {
+ compatible = "mediatek,mt8365-seninf";
+ reg = <0 0x15040000 0 0x6000>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM_SENIF>,
+ <&topckgen CLK_TOP_SENIF_SEL>;
+ clock-names = "camsys", "top_mux";
+
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+ phys = <&mipi_csi0 PHY_TYPE_DPHY>, <&mipi_csi1>;
+ phy-names = "csi0", "csi1";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ seninf_camsv1_endpoint: endpoint {
+ remote-endpoint =
+ <&camsv1_endpoint>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ seninf_camsv2_endpoint: endpoint {
+ remote-endpoint =
+ <&camsv2_endpoint>;
+ };
+ };
+ };
+ };
+
+ camsv1: camsv@15050000 {
+ compatible = "mediatek,mt8365-camsv";
+ reg = <0 0x15050000 0 0x0040>,
+ <0 0x15050208 0 0x0020>,
+ <0 0x15050400 0 0x0100>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM>,
+ <&camsys CLK_CAMTG>,
+ <&camsys CLK_CAMSV0>;
+ clock-names = "cam", "camtg", "camsv";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+ mediatek,larb = <&larb2>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camsv1_endpoint: endpoint {
+ remote-endpoint = <&seninf_camsv1_endpoint>;
+ };
+ };
+ };
+ };
+
+ camsv2: camsv@15050800 {
+ compatible = "mediatek,mt8365-camsv";
+ reg = <0 0x15050800 0 0x0040>,
+ <0 0x15050228 0 0x0020>,
+ <0 0x15050c00 0 0x0100>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&camsys CLK_CAM>,
+ <&camsys CLK_CAMTG>,
+ <&camsys CLK_CAMSV1>;
+ clock-names = "cam", "camtg", "camsv";
+ iommus = <&iommu M4U_PORT_CAM_IMGO>;
+ mediatek,larb = <&larb2>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camsv2_endpoint: endpoint {
+ remote-endpoint = <&seninf_camsv2_endpoint>;
+ };
+ };
+ };
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt8365-vdecsys", "syscon";
reg = <0 0x16000000 0 0x1000>;