diff mbox series

[PULL,04/24] target/arm: Support migration when FPSR/FPCR won't fit in the FPSCR

Message ID 20240711131822.3909903-5-peter.maydell@linaro.org
State Accepted
Commit abf1046a155bc73ceb2c3be3fdfb9c8ffebf9dd1
Headers show
Series [PULL,01/24] target/arm: Correct comments about M-profile FPSCR | expand

Commit Message

Peter Maydell July 11, 2024, 1:18 p.m. UTC 
To support FPSR and FPCR bits that don't exist in the AArch32 FPSCR
view of floating point control and status (such as the FEAT_AFP ones),
we need to make sure those bits can be migrated. This commit allows
that, whilst maintaining backwards and forwards migration compatibility
for CPUs where there are no such bits:

On sending:
 * If either the FPCR or the FPSR include set bits that are not
   visible in the AArch32 FPSCR view of floating point control/status
   then we send the FPCR and FPSR as two separate fields in a new
   cpu/vfp/fpcr_fpsr subsection, and we send a 0 for the old
   FPSCR field in cpu/vfp
 * Otherwise, we don't send the fpcr_fpsr subsection, and we send
   an FPSCR-format value in cpu/vfp as we did previously

On receiving:
 * if we see a non-zero FPSCR field, that is the right information
 * if we see a fpcr_fpsr subsection then that has the information
 * if we see neither, then FPSCR/FPCR/FPSR are all zero on the source;
   cpu_pre_load() ensures the CPU state defaults to that
 * if we see both, then the migration source is buggy or malicious;
   either the fpcr_fpsr or the FPSCR will "win" depending which
   is first in the migration stream; we don't care which that is

We make the new FPCR and FPSR on-the-wire data be 64 bits, because
architecturally these registers are that wide, and this avoids the
need to engage in further migration-compatibility contortions in
future if some new architecture revision defines bits in the high
half of either register.

(We won't ever send the new migration subsection until we add support
for a CPU feature which enables setting overlapping FPCR bits, like
FEAT_AFP.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-5-peter.maydell@linaro.org
---
 target/arm/machine.c | 134 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 132 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/target/arm/machine.c b/target/arm/machine.c
index 0a722ca7e75..8c820955d95 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -18,6 +18,34 @@  static bool vfp_needed(void *opaque)
             : cpu_isar_feature(aa32_vfp_simd, cpu));
 }
 
+static bool vfp_fpcr_fpsr_needed(void *opaque)
+{
+    /*
+     * If either the FPCR or the FPSR include set bits that are not
+     * visible in the AArch32 FPSCR view of floating point control/status
+     * then we must send the FPCR and FPSR as two separate fields in the
+     * cpu/vfp/fpcr_fpsr subsection, and we will send a 0 for the old
+     * FPSCR field in cpu/vfp.
+     *
+     * If all the set bits are representable in an AArch32 FPSCR then we
+     * send that value as the cpu/vfp FPSCR field, and don't send the
+     * cpu/vfp/fpcr_fpsr subsection.
+     *
+     * On incoming migration, if the cpu/vfp FPSCR field is non-zero we
+     * use it, and if the fpcr_fpsr subsection is present we use that.
+     * (The subsection will never be present with a non-zero FPSCR field,
+     * and if FPSCR is zero and the subsection is not present that means
+     * that FPSCR/FPSR/FPCR are zero.)
+     *
+     * This preserves migration compatibility with older QEMU versions,
+     * in both directions.
+     */
+    ARMCPU *cpu = opaque;
+    CPUARMState *env = &cpu->env;
+
+    return (vfp_get_fpcr(env) & ~FPCR_MASK) || (vfp_get_fpsr(env) & ~FPSR_MASK);
+}
+
 static int get_fpscr(QEMUFile *f, void *opaque, size_t size,
                      const VMStateField *field)
 {
@@ -25,7 +53,10 @@  static int get_fpscr(QEMUFile *f, void *opaque, size_t size,
     CPUARMState *env = &cpu->env;
     uint32_t val = qemu_get_be32(f);
 
-    vfp_set_fpscr(env, val);
+    if (val) {
+        /* 0 means we might have the data in the fpcr_fpsr subsection */
+        vfp_set_fpscr(env, val);
+    }
     return 0;
 }
 
@@ -34,8 +65,9 @@  static int put_fpscr(QEMUFile *f, void *opaque, size_t size,
 {
     ARMCPU *cpu = opaque;
     CPUARMState *env = &cpu->env;
+    uint32_t fpscr = vfp_fpcr_fpsr_needed(opaque) ? 0 : vfp_get_fpscr(env);
 
-    qemu_put_be32(f, vfp_get_fpscr(env));
+    qemu_put_be32(f, fpscr);
     return 0;
 }
 
@@ -45,6 +77,86 @@  static const VMStateInfo vmstate_fpscr = {
     .put = put_fpscr,
 };
 
+static int get_fpcr(QEMUFile *f, void *opaque, size_t size,
+                     const VMStateField *field)
+{
+    ARMCPU *cpu = opaque;
+    CPUARMState *env = &cpu->env;
+    uint64_t val = qemu_get_be64(f);
+
+    vfp_set_fpcr(env, val);
+    return 0;
+}
+
+static int put_fpcr(QEMUFile *f, void *opaque, size_t size,
+                     const VMStateField *field, JSONWriter *vmdesc)
+{
+    ARMCPU *cpu = opaque;
+    CPUARMState *env = &cpu->env;
+
+    qemu_put_be64(f, vfp_get_fpcr(env));
+    return 0;
+}
+
+static const VMStateInfo vmstate_fpcr = {
+    .name = "fpcr",
+    .get = get_fpcr,
+    .put = put_fpcr,
+};
+
+static int get_fpsr(QEMUFile *f, void *opaque, size_t size,
+                     const VMStateField *field)
+{
+    ARMCPU *cpu = opaque;
+    CPUARMState *env = &cpu->env;
+    uint64_t val = qemu_get_be64(f);
+
+    vfp_set_fpsr(env, val);
+    return 0;
+}
+
+static int put_fpsr(QEMUFile *f, void *opaque, size_t size,
+                     const VMStateField *field, JSONWriter *vmdesc)
+{
+    ARMCPU *cpu = opaque;
+    CPUARMState *env = &cpu->env;
+
+    qemu_put_be64(f, vfp_get_fpsr(env));
+    return 0;
+}
+
+static const VMStateInfo vmstate_fpsr = {
+    .name = "fpsr",
+    .get = get_fpsr,
+    .put = put_fpsr,
+};
+
+static const VMStateDescription vmstate_vfp_fpcr_fpsr = {
+    .name = "cpu/vfp/fpcr_fpsr",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .needed = vfp_fpcr_fpsr_needed,
+    .fields = (const VMStateField[]) {
+        {
+            .name = "fpcr",
+            .version_id = 0,
+            .size = sizeof(uint64_t),
+            .info = &vmstate_fpcr,
+            .flags = VMS_SINGLE,
+            .offset = 0,
+        },
+        {
+            .name = "fpsr",
+            .version_id = 0,
+            .size = sizeof(uint64_t),
+            .info = &vmstate_fpsr,
+            .flags = VMS_SINGLE,
+            .offset = 0,
+        },
+        VMSTATE_END_OF_LIST()
+    },
+};
+
 static const VMStateDescription vmstate_vfp = {
     .name = "cpu/vfp",
     .version_id = 3,
@@ -100,6 +212,10 @@  static const VMStateDescription vmstate_vfp = {
             .offset = 0,
         },
         VMSTATE_END_OF_LIST()
+    },
+    .subsections = (const VMStateDescription * const []) {
+        &vmstate_vfp_fpcr_fpsr,
+        NULL
     }
 };
 
@@ -784,6 +900,20 @@  static int cpu_pre_load(void *opaque)
     ARMCPU *cpu = opaque;
     CPUARMState *env = &cpu->env;
 
+    /*
+     * In an inbound migration where on the source FPSCR/FPSR/FPCR are 0,
+     * there will be no fpcr_fpsr subsection so we won't call vfp_set_fpcr()
+     * and vfp_set_fpsr() from get_fpcr() and get_fpsr(); also the get_fpscr()
+     * function will not call vfp_set_fpscr() because it will see a 0 in the
+     * inbound data. Ensure that in this case we have a correctly set up
+     * zero FPSCR/FPCR/FPSR.
+     *
+     * This is not strictly needed because FPSCR is zero out of reset, but
+     * it avoids the possibility of future confusing migration bugs if some
+     * future architecture change makes the reset value non-zero.
+     */
+    vfp_set_fpscr(env, 0);
+
     /*
      * Pre-initialize irq_line_state to a value that's never valid as
      * real data, so cpu_post_load() can tell whether we've seen the